Hire the best Electric Motor Design experts for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I am a Mechatronics engineer I have excellent knowledge with projects that consist of electrical components as well as pure mechanical projects. Read more

I am a Mechatronics engineer I have excellent knowledge with projects that consist of electrical components as well as pure mechanical projects.

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works... Read more

A master’s graduate with First Class Honours in Advanced Mechanical Engineering from University of Leicester, United Kingdom. During my masters, I had a module based on CAD modelling using Solid Works, where I had successfully submitted a CAD model of an spur gear. Also, had carried out stress analysis on the modelled part. This module has given me an overall proficiency of SolidWorks and capability to work on any task individually. At the same time, I have hands on experience with Matlab. I have successfully presented many Matlab simulated programs using various programming algorithms. For my masters project which was based on ‘Co-deposition of nickel-SiC using Pulse reverse plating techniques to produce nano composites’. Majority of the work was undertaken at the university which made me utilize all the resources and advanced technological equipment like scanning electron microscopy. After course completion, I have worked as a Teaching Assistant in the department of engineering. I have assisted in demonstrating mechanical oriented first year labs concerning flow measurements in pipes, and electrical oriented labs based on circuit design and analysis using P Spice. Also, assisted in second year labs helping students to learn about material selection in devices using CES Edupack software, as well as different engineering materials micro structural properties and processing. Furthermore, I have helped in for fourth year module involving conceptual design process for turbofan engines with improvements in aero engine design configurations. Throughout my educational & professional experiences, I have built a rigorous tendency to achieve the best possible results by approaching them with new innovative ideas.

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company... Read more

In August of 2017, after serving 33 years as an engineer in the electrical products industry, I decided to form a company to meet the unique needs that exist in the marketplace of today. That company is called Faithful Engineering, LLC. I served as a Vice President of Engineering for 20 of my 33 years in the product manufacturing industry, so there are very few engineering functions that I have not had some experience with. Let me show you what a difference that can make!

Electrical engineer degree 5 years Electrical panels designs experience Read more

Electrical engineer degree 5 years Electrical panels designs experience

I have learnt ProE and Solidworks softwares as my courses. I have designed Rack and Pinion Gear arrangement in ProE. Moreover, I have designed Bicycle Frame in Solidworks alongwith FEA simulations. I... Read more

I have learnt ProE and Solidworks softwares as my courses. I have designed Rack and Pinion Gear arrangement in ProE. Moreover, I have designed Bicycle Frame in Solidworks alongwith FEA simulations. I also have Mechanics of Materials knowledge to better understand and analyze the designs.

I'm an electrical Engineer having lots of experience in design and drafting. I have completed too many projects which is from national and international. I have both 2D and 3D drafting and designing k... Read more

I'm an electrical Engineer having lots of experience in design and drafting. I have completed too many projects which is from national and international. I have both 2D and 3D drafting and designing knowledge. and'm continuously growing myself in same field to become expert in design field.

With 5 years of experience in AutoCAD Electrical design I offer professional AutoCAD drawing services to customers worldwide. I can design control panels for commercial and industrial spaces; security... Read more

With 5 years of experience in AutoCAD Electrical design I offer professional AutoCAD drawing services to customers worldwide. I can design control panels for commercial and industrial spaces; security systems; and lighting, telephone and computers plus any additional panels you may require for your custom project. The Electrical Drafting services include: Lighting and Power Layout Circuit Diagram Termination diagrams Industrial motor controls and PLCs Electrical panel layout design PDF or Scanned drawings to DWG Power system design I offer AutoCAD Electrical Drawing outsourcing services for electrical engineers on best possible prices and also assist in ELV and Security Systems Design. I strive for perfection and deliver on time to give you a competitive edge. Why Choose Me? Our company has 5 years of experience in using US, UK, and Australian drawings standards Each design is handled by a team of architects to ensure top quality Each delivery includes Pdf and CAD files Satisfaction is guaranteed.

We provide both engineering and drafting services. We specialize in electrical engineering work which include (but not limited): • Single/Multi line diagrams • Power flow analysis • Power System co... Read more

We provide both engineering and drafting services. We specialize in electrical engineering work which include (but not limited): • Single/Multi line diagrams • Power flow analysis • Power System coordination • Grounding • Solar Design • Layout diagrams • Battery sizing • … etc. We guarantee your satisfaction.

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important tha... Read more

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important that I want to share with you today. For most of you reading this, hiring an electrical engineering freelancer or contractor has been a struggle to say the least. You have likely lost a great deal of money only to receive a sub-marginal product. Constant change orders, redraws, slow work, missed deadlines, failing “cross-functional” teams, no quality assurance, and huge bills are just a few examples. I would imagine that you are feeling very frustrated, confused, and maybe even a little humiliated. Does this sound about right? You are correct to be worried, because many people get screwed over when they hire an engineering contractor. But what if I told you there is one thing, just one thing you could do to flip the script? It is as easy as sending me a message on Cad Crowd. I am an American entrepreneur, electrical engineer, and trusted consultant. I am an accomplished expert with nearly a decade of experience in the electrical engineering industry. As a knowledgeable professional with experience in the nuclear industry, I have had serious involvement with numerous quality-dependent, critical power and control systems. Within five years of graduating from the prestigious Clarkson University with a Bachelor of Science Degree in Electrical Engineering, in addition to minors in both Computer Science and Mathematics, I obtained experience at a multinational technology company and also rapidly became a trusted, lead analytical engineer at Indian Point Energy Center. Today, I help individuals and entrepreneurs maximize their profits by increasing their technical expertise. Once we are both interested in working together on a project, before you even spend a penny, I offer a free, no-obligation video conference kick-off meeting to eliminate any reasonable doubt that we are a perfect match for each other. When working with me, you get to save money on high-quality services. If, like for many cash-constrained businesses, your budget is under scrutiny, you may be forced to rationalize your procurement model. Traditional consulting firms are just not agile enough to adapt. Red tape strangles engineers in many firms. Do not overspend on a wasteful system. Embrace the cost reductions! It is the only way to accelerate your growth and wealth! When working with me, you have access to a quick, easy, and convenient hiring process. In the engineering services sector, most businesses still rely heavily on localized industry experts, consulting firms, and in-house talent. These engineers are often experts, but their geographic proximity to their clients is more often their greatest fortune. The process for procuring my service is extraordinarily quick and simple. I embrace business flexibility. All you need to do is send me a brief message on Cad Crowd! When working with me, you get clarity and security. The payments involved are clearly defined upfront. You do not assume the risk that a firm might claim to be starting a project, take a deposit, and then not deliver. There is no reason not to act now. Your co-workers will rave about your success! When firms change engineers during the project, team turnover can put projects of any size at risk. Throughout the process, one or more team members leaving could result in a project failing if the knowledge and talent walk out the door. When working with me, you know that I am going to be the one working on your project from start to finish with an outcome driven mindset. Visit the link below now to check out my website and see why businesses come to me for solutions. I want to help you, but I am a busy guy and do not have much time to add additional projects to my plate. Do not wait until it is too late. Do not continue to struggle day to day to ensure your market dominance and make a sustainable profit. Everyone knows that we needed our independent expert opinion and design solutions yesterday. Make your life easier. Send me a message on Cad Crowd now to get your project started! I will talk to you soon.

Highly driven mechanical engineer and product designer with a wide range of skills to meet both technical and non-technical needs. Read more

Highly driven mechanical engineer and product designer with a wide range of skills to meet both technical and non-technical needs.

I have 4 years of AutoCAD Designer & Drafting experience. I am a project engineer for an Electrical engineering company and have managed my own small design projects. I am highly skilled in, AutoCAD 2... Read more

I have 4 years of AutoCAD Designer & Drafting experience. I am a project engineer for an Electrical engineering company and have managed my own small design projects. I am highly skilled in, AutoCAD 2D & 3D. And Also I have good experience in MEP Design & Calculations for Homes, Office Buildings, Schools, and Retail. I can do MEP Services Drawings in 2d & 3D AutoCAD, Power Calculations, IEC Standard. Scope of Services: MEP-Mechanical, Electrical, Plumbing,Fire System & CCTV.

Enthusiastic in playing string instruments, mostly the violin. Trained in kick boxing for two years. Likes music and Sport competition. Read more

Enthusiastic in playing string instruments, mostly the violin. Trained in kick boxing for two years. Likes music and Sport competition.

An internationally experienced professional in the mechanical industry with interest in automotive and motor sport engineering. An innovative and result driven professional with expertise in designing... Read more

An internationally experienced professional in the mechanical industry with interest in automotive and motor sport engineering. An innovative and result driven professional with expertise in designing, production and quality techniques. Over 3 years of consistent track record in developing new designs, anticipating solutions and completing projects to specification. I am looking to use my technical, design and creative skills to make an impact on the field of engineering design and development. My technical skills include:  Proficiency in Autocad, ProE/Catia/Creo, Ansys, Matlab, Phoenics VR, Ricardo Wave  Experience in engineering design of various mechanisms/machinery/tools/systems  Production Planning and Control systems through Operational Research and Project Management  Finite Element Analysis, CFD, Vehicle Dynamics, Sustainable Design, Engine Design  Basic C & C++ computer programming and well versed with Microsoft Office Suite applications  Dismantling, Service & Assembly of automotive components  Performance testing and tweaking IC Engines and Electric Motors to achieve desired characteristics  Workshop and machine shop techniques  Testing of solids and fluids

Hi guys, I hope all is well. My name is Abdulwahab solkar. I live in Mumbai, india. i have done Bachelor Of Engineering in electrical. I have 3 years of Design Experience in Electrical Distribution Sy... Read more

Hi guys, I hope all is well. My name is Abdulwahab solkar. I live in Mumbai, india. i have done Bachelor Of Engineering in electrical. I have 3 years of Design Experience in Electrical Distribution Systems, Substation Design, Earthing and lightning protection system and lighting calculation for Industrial Plants of various nature like Oil and Gas, Petrochemical, Heavy Engineering Industries etc. I have software proficiency in Autocad, Etap and Dialux and well Familiar with relevant national and international standards codes like IS, IEC, NFPA, IEEE, ANSI, NEC, NBC, OISD etc. I am acquainted with electrical protection and metering philosophy, electrical layouts, equipment sizing and selection, hazardous area classification, Power System study including load flow, short circuit, highest motor starting, and relay co-ordination. I had worked for various clients like Oil & Natural Gas Corporation Limited, Onshore Engineering Limited, and Hindustan Petroleum Corporation Limited etc. If you have any query you can contact me at any time. Thank you for your time and consideration. Let’s find superior & economical electrical design solution.

HVAC Design Analysis & Project Execution Skills: • Heat load Estimation & Calculations for Industrial Buildings • HVAC Units / Equipment selection • HVAC Systems Fan Selections • Preparation/ap... Read more

HVAC Design Analysis & Project Execution Skills: • Heat load Estimation & Calculations for Industrial Buildings • HVAC Units / Equipment selection • HVAC Systems Fan Selections • Preparation/approval of GA drawings of AHUs, FCUs, Exhaust Fans etc. • Preparation of Air flow diagrams • Preparation of Ducting layouts for HVAC Systems • Preparation of Piping layouts for HVAC Systems • Preparation of Tender specifications & BOQs • Taking approvals of working Drawings from Consultant / Client • Preparation of User requirement specifications of HVAC Systems • Preparation of Technical specification of equipment like AHUs, FCUs, Pumps, Chillers etc. • Coordination between Client / Consultant & Vendors • Technical Bid Analysis • Vendor Documents Reviews / Approvals • Vendor / contractors / Subcontractors Control & coordination • Aware of API and Formulation facility of Pharma sectors • Preparation / Approval of document like Design, Installation, Operation & Performance Qualification for HVAC Systems • Preparation of Purchase Requisition as per BOQ • Preparation of Project Planning, scheduling and Monthly Progress Reports • Follow up with vendors and consultants regarding Engineering activities and coordination with the vendors for timely manufacturing and the delivery of equipment to the site. Inspection of Invoices after delivery of material to site • Coordination with site regarding Erection and commissioning of equipment as per protocol and final documentation for handover of project • Electric motor selection for AHUs • Preparation of Power Cable Schedules for HVAC Equipment • Site Control activities • Project Execution & Commissioning

KALEEM SHARIFF No 54/20,4th Cross Laxmi Road Shanthinagar, Bangalore – 560 027 Mobile No : ▒▒▒▒▒▒▒▒▒▒▒ Email : ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Over 25 years exper... Read more

KALEEM SHARIFF No 54/20,4th Cross Laxmi Road Shanthinagar, Bangalore – 560 027 Mobile No : ▒▒▒▒▒▒▒▒▒▒▒ Email : ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Over 25 years experience in reputed Organization as Engineer Designs in various level and different companies Wide exposure and hands on experience in design and development, Reverse engineering, Tool designs, Product Design and prototyping, Machine design and development, Material handling equipment, Sheet metal and Plastic design & development, Production planning, Wood Working using CNC & conventional machines and Design process using 2D and 3D CAD. High level of adaptability since have worked in different areas. A result oriented, initiator and go-getter with proven track record. I have depth knowledge on Design & development, Planning and Out sourcing, Manufacturing, Project execution, production planning, Vendor developments etc Professional Experience : More then Fifteen years experience in CAD & its related activities. Having wide exposure on - Solid Edege V3 to V20 and ST - Solid Works - UG NX2 - Auto CAD. - ZW CAD 2D and 3D - Archicad 9 - Microstation, Intelli CAD, Tourbo CAD, Cadlab-2005 - 3Dsmax and Maya - Flash Wide Exposure and hand on experience in Part Modeling, Assembly Modeling, Sheet metal modeling & development, Welding , Drafting, Piping, wiring for Panels, kinematics solution & Checking interference, Geometrical Tolerance Design Process, Tool Designs, Product Designs, I am good in project management and 2D & 3D drawings as per IS & ISO Standards. Experienced in Virtual Prototype modeling, Simulation, Animation & Manufacturing process using 3D CAD & Reverse Engineering. Some of the recent successful completed Projects SERVICE KIOSK: Design & develop and proto type of service Kiosk enclosures and system engineering for Banking and others like Ticket collecting at the parking places etc. (successfully completed) SOLAR TRACKER: Design and develop of single and two way tracking of solar energy for mono cells and HCPV cells using actuator and motor. (successfully completed) SWITCHES: Touch screen switch enclosure and higher end touch switch for houses and hotels (successfully completed) ELECTRIC BOOSTER: Design and develop it is like small SPM using lever mechanism etc. HAND HELD COMPUTER: Enclosures like plastic molding and system design (successfully completed) NET WORKING, SERVER RACKS AND CONTROL PANELS: Design development of full range of rack and control panels including cable manager etc (successfully completed) DBR systems for Railway: Indigenous design and develop (successfully completed) Kiosk for Games Using different material like CRCA, SS, Wood, FRP, etc (successfully completed) DEVELOPMENT OF FURNITURE: OFFICE FURNITURE : - Modular Work Station - Discussion Table - Conference table - Full height Partition - Height adjustable Table - Height adjustable monitor - Storage (metal and wood) - Etc RETAIL FURNITURE (using sheet metal) - Wall units Gondola - Island Gondola - Aligator Stand - Display racks - Shop fitting fixtures - Mobile store Fixtures - Cash counters - Etc. HOUSE FURNITURE - Modular kitchen - Bed room furniture - Etc SCHOOL FURNITURE HOTEL FURNITURE NET WORKING RACKS AND CABLE TRAYS LADDERS ETC. DEVELOPMENT OF - Auto mobile Components - Indexing unit for milling machine - Oval turning unit - Sachet making machine - Printer enclosures - Electrical Capacitor - Electrical panel - Electrical & Electronic enclosures - Fire alarm enclosure - Plastic switches - Electronic Product Designs - Encoders - SPM Machines for Textile and other Industries - Jigs & Fixtures and Cutting Tools - Press Tools - Industrial Gauges - 3D Model for 3D axes machine - Development for Automation unit Like Plastic Sealing unit, Drilling and Tapping unit attachment to machine etc and developed also for other machines (Reduce man power , increase the Production and Quality) - Cutting Tools like Form Tool, Drills, End Mills etc – 3D model for 5D axes Tool Grinding machine WATCHES : - Developed new watch movement and checked all parameters - 3D modeling of new watch cases & Rapid prototype - Development of Digital and Analog Watches - Packing boxes for Watches (higher end and lower cost) MEDICAL EQUIPMENT: - Dental Chair - Auto Clave - Operation theatre equipment - Syringe Pump - Testing Unit (Blood, Urine etc) PRODUCT DESIGN AND DEVELOPMENT - Furniture Designs - Service Kiosk for Banking and other sector - ATM Machine - Fire Alarm box - Floor Boxes - Seat for Bus & Bus Interior - Ultraviolet unit for Medical purpose - Water filterer and Mobile water purifier - Development of Garden lamp & Fountain Lamp (Water proof with IP65) - Water Filter and Electronic Level Indicator - Table water Purifier - Mobile Water Filter - Development of Electronic sensor for motors (Mechanical Parts including Plastic and sheet metal Components and also tool design for the same components) - Chassis for UNO Console - Hand Held computers - Net working racks Reverse Engineering Projects : - Caulking machine - Oval turning unit - Automobile Components - Collapsible doors - Operation theatre equipment - Indexing unit - Reverse Engineering of SPM for textile and other industries - Cam Designing for Semi Automatic Auto Lath - Gang Drilling machine - Saddle Stitching machine projects - Web printing machine - Switches for Aeronautics - Switches for General purpose - Irrigation components like Dippers, Sprinkles etc - Chassis for UNO Console General Project: - Worked on Standards department in the field of Standardization of Tap, Drills, Gauges, Material and Tools standards as per IS and ISO. - Jig and Fixtures, Striking unit & Cutting Tools for Watch components - Back bone route diagram for TTL ( Design & Drafting) - Cartoon Animation ( 2D & 3D ) Projects for overseas - Furniture designing - Worked for ISO-9000 certification - Corporate training & Bench marking for Solid edge, Auto CAD, Micro station - Arictectural Walk through - CAD conversions - Cooling Plant layout (3D & 2D)

Mechanical designer Frecuencia 122.5 de México, September 2015-current CAD draftsman Hidalgo group, February-August 2015 CAD drawing and 3D printing Professor at Universidad Autónoma del Estado de... Read more

Mechanical designer Frecuencia 122.5 de México, September 2015-current CAD draftsman Hidalgo group, February-August 2015 CAD drawing and 3D printing Professor at Universidad Autónoma del Estado de Hidalgo, campus Sahagún city January-July 2015 Electrical technician June 2014-December 2014 Professor at La Salle Pachuca university, September 2013–May 2014 -Technical adviser for the design of an all-terrain single-seater vehicle for the annual competition Mini Baja SAE 2014 Research Professor Polytechnic University of Pachuca September 2006-July 2013 -Responsible for the design and construction of a single-seater vehicle impulsed by a electric motor for the competence Toyota-Electratón-LTH 2012 and 2013. -Responsible for the mechanical design and construction of a wind tunnel for qualitative aerodynamics tests. -Mechanical design of a opening-closing mechanism for a roof window application. Electrical technician López Alonso group 2002 Electrical technician Alfa Construction Group September 1999-Julio 2002 Lathe worker López Alonso Group September 1997-Diciembre 1998

7 years of engineering experience with 6 years of experience related to design of Surface Mounted Permanent magnet (SMPM), Interior Permanent Magnet (IPM) and Induction Machines (IM). Intensive exper... Read more

7 years of engineering experience with 6 years of experience related to design of Surface Mounted Permanent magnet (SMPM), Interior Permanent Magnet (IPM) and Induction Machines (IM). Intensive experience in electric motors design tools such as Maxwell, JMAG, Motor-CAD, and other FEA and simulation tools. Hands on experience in testing of electric motors (sometimes, if necessary, using Python). Experienced in sizing (specification and performance) and testing of electric motors. Experienced in designing, validating, and manufacturing of electric motors for various applications.

Commercially aware, professional engineer with experience of design, specification, testing and installation of oil and gas equipment; in particular piping and subsea valves. Currently working for a... Read more

Commercially aware, professional engineer with experience of design, specification, testing and installation of oil and gas equipment; in particular piping and subsea valves. Currently working for a subsea valve company, responsible for producing concept designs, designing to customer specifications, troubleshooting products, introducing cost-cutting methods and planning departmental work schedule. Particular areas of experience include gate, ball, needle and check valves, but have worked installing pipework and large plant including pulverising mills, electric motors, pumps and compressors.

I am an electrical engineer who has experience in designing power plants, transmission lines, and smelters. I contributed to designing FEED, Detailed Engineering drawing, feasibility study, and others... Read more

I am an electrical engineer who has experience in designing power plants, transmission lines, and smelters. I contributed to designing FEED, Detailed Engineering drawing, feasibility study, and others. I work in an EPC company that has a lot of experience. My expertise is: 1. ETAP and Digsilent - Load Flow Studies - Short Circuit - Transient Stability - Optimal Capacitor Placement - Motor Starting - Arc flash - etc. 2. Autocad - Detailed design - General Arrangement - Internal Wiring - Single Line Diagram - 2D Design 3. Microsoft Office - Word - Power point - Excel

Projects: 1. Experimental Comparison and Performance Analysis for Hydrodynamic Journal Bearing using various Viscous Fluids. Hydrodynamic Journal Bearing commonly used in large turbines, generators,... Read more

Projects: 1. Experimental Comparison and Performance Analysis for Hydrodynamic Journal Bearing using various Viscous Fluids. Hydrodynamic Journal Bearing commonly used in large turbines, generators, compressors, gearboxes and pumps in the power generation and oil, gas and chemical processing industries. Oil is the main component of bearing which sustain pressure as well as temperature of bearings. This test rig analyze different oils for given temperature and pressure and provide optimum results. This test rig improves the life of bearing and reduces cost by comparing and analyzing different fluids. Software used: Pro-E, Matlab 2. Wet cloth twister: It’s difficult for old and physically weak peoples to twist clothes. This products reduces twisting efforts and muscle pain. Software used: Unigraphics Nx 3. I Card Pin clamping fixture for riveting machine. It’s very difficult to insert spring and pin mechanism in I card pin manually. The spring and pin inserted by arrangement of toggle clamp mechanism and fixture. Software used: Solid Edge 4. Electric Tri-cycle with Gear Transmission. This Electric Tri-cycle basically use for public transportation, material handling in industry. Electrical Tri-cycle operated both mechanically and electrically. This tri-cycle contribute major role in reducing pollution. Technologies used: BLDC motor, Gear Transmission Mechanism.

Bachelor degree in mechanical engineering, Design Engineer, creating detailed mechanical drawings for piece parts and assemblies from Autodesk Inventor and Solidwork. Backed by skills in design for ma... Read more

Bachelor degree in mechanical engineering, Design Engineer, creating detailed mechanical drawings for piece parts and assemblies from Autodesk Inventor and Solidwork. Backed by skills in design for manufacturability by using CAD/CAM software. Having a good communication and highly interested to new challenge.

Hi, as you already know the name, I am a mechanical design engineer. 1. I Like to work with the design and development of medical devices. I like working on designing new products from scratch and wo... Read more

Hi, as you already know the name, I am a mechanical design engineer. 1. I Like to work with the design and development of medical devices. I like working on designing new products from scratch and working on a project from start to end. From documentation to the final product. Converting the drawing to the actual product by using various R&D tools. 2. My Specialty is in Solidworks, for CAD modeling and drafting the product as well as basic work knowledge of Ansys for Static structural analysis and 2d fluid flow which helps sometime in simulation or to understand the simulation of different analysis. 3. Along with that I have worked on various product rendering software like Keyshot, fusion 360, and I have a good grip on Adobe Illustrator for illustration and other sorts of work. 4. Worked on various manufacturing processes like mold designing and manufacturing, Letha, Milling, and CNC machines for multiple parts as per the requirements.