Trusted by
$5/hr
MAY-CAD Designer
Hello! Welcome to palace of resolution!! I am an expert and hyper 3d modeler having the skills you are looking for, I work with unlimited revision, quick delivery and quality project. I am special... Read more
Hello! Welcome to palace of resolution!! I am an expert and hyper 3d modeler having the skills you are looking for, I work with unlimited revision, quick delivery and quality project. I am specialized on handling any type of modeling, 3d modeling, 3d character modeling, 3d. Metahuman, 3d sculpting with any type of software: blender, maya, 3ds Max etc... With my expertise as a modeler I can fix bugs, adjust anything and integrate plug in to your model, all with my experience of 6 years I worked with decades of clients and help them based on my expertise.... So make a right choice and shot me a message to get your project done. And I will listen carefully to you and get you the best quality project. Thanks Works for the best
$10/hr
MAY-CAD Designer
im a professional 3d artist working with zbrush, substance painter, and sometimes i like to use marvelous designer Read more
im a professional 3d artist working with zbrush, substance painter, and sometimes i like to use marvelous designer
$10/hr
MAY-CAD Designer
Hello, my name is Sudharsan, I have more than 1 years experience working on technical drawings and working as a 2D/3D furniture and architecutre freelancer, Interior designer and visualizer. I have b... Read more
Hello, my name is Sudharsan, I have more than 1 years experience working on technical drawings and working as a 2D/3D furniture and architecutre freelancer, Interior designer and visualizer. I have been involved in various furniture and design projects (individual designers as well as companies), architecural concepts, building persmissions application (floorplans, elevations, sections, site map), etc. I can provide you servies related to 2D/3D AutoCAD drawings, 3D SketchUP modeling + Vray renderings, Lumion visualisation + walkthrough animations, 3ds Max, etc. Furthermore, I can provide support design and graphics work with Photoshop and Adobe Premiere Pro, InkScape, as well as personal one-by-one CAD teaching
$13/hr
MAY-CAD Designer
Chemical Engineer with 5+ years of CAD experience. Mainly operate out of open source (FreeCAD) sofware but am comforable with SolidWorks and AutoDesk Inventor. Read more
Chemical Engineer with 5+ years of CAD experience. Mainly operate out of open source (FreeCAD) sofware but am comforable with SolidWorks and AutoDesk Inventor.
$94/hr
MAY-CAD Designer
Professional Engineer, member American Society of Civil Engineers, 9 years experience in civil/structural engineering, 10 years experience in residential design, broad range of experience from single... Read more
Professional Engineer, member American Society of Civil Engineers, 9 years experience in civil/structural engineering, 10 years experience in residential design, broad range of experience from single family homes to industrial complexes
MAY-CAD Designer
Arafat parvez has been working with clients.He provides General CAD drafting and 3D modeling.His Educational background in family science.You may learn more about her services at http://arafatpz.tk .... Read more
Arafat parvez has been working with clients.He provides General CAD drafting and 3D modeling.His Educational background in family science.You may learn more about her services at http://arafatpz.tk .
$10/hr
MAY-CAD Designer
Hello, I am a 3d modeler and visualizer. Here's what I can do: - Creation of a 3D model according to size or photograph (hight poly/low poly); - Assembly of the scene and its visualization; - Visuali... Read more
Hello, I am a 3d modeler and visualizer. Here's what I can do: - Creation of a 3D model according to size or photograph (hight poly/low poly); - Assembly of the scene and its visualization; - Visualization of individual items; - Create high quality textures.
$25/hr
MAY-CAD Designer
I have approximately 18 years of design / manufacturing experience. Utilizing SolidWorks, MasterCam, Polyworks. I am available to help with any type of product design, 3d modeling, reverse engineeri... Read more
I have approximately 18 years of design / manufacturing experience. Utilizing SolidWorks, MasterCam, Polyworks. I am available to help with any type of product design, 3d modeling, reverse engineering, laser scanning needs you may have. This includes modeling from point cloud data.
I am having a team of 2D/3D artist and VFX designer accumulating which the experience comes to more than 4years. We have always been known for our quality work and we as a team always strive to satisf... Read more
I am having a team of 2D/3D artist and VFX designer accumulating which the experience comes to more than 4years. We have always been known for our quality work and we as a team always strive to satisfy the client's requirements. Our detailed work may be seen in our website.
$13/hr
MAY-CAD Designer
I am Omkar Singh and I am a well Certificated CAD product Designer from CADD centre in May 2019. Basically I am from Haryana (INDIA) Read more
I am Omkar Singh and I am a well Certificated CAD product Designer from CADD centre in May 2019. Basically I am from Haryana (INDIA)
$56/hr
MAY-CAD Designer
My name is Jacob Oestreich and I'm the Owner of Green University Engineering. We are a Fully Insured CAD, Drafting, and Design Services provider. I've been doing drafting and design work in one form o... Read more
My name is Jacob Oestreich and I'm the Owner of Green University Engineering. We are a Fully Insured CAD, Drafting, and Design Services provider. I've been doing drafting and design work in one form or another for around 7 years. I have experience in many industries including concrete, architecture, metal fabrication, foundry, heavy equipment, marine, agricultural equipment, glazing, aerospace, military, paper, manufacturing, and machining. I've worked on everything from single parts, to 10,000 plus component assemblies. I've done everything from welding to managing a large prototype design company. I'm currently in pursuit of growing my business. My business philosophy breaks down to Quality being of the utmost importance. If the customer isn't getting the product that they are paying for, I'm not doing my job. As of now I will be offering my Services FREE of Charge if Quality requirements are not met. What I mean by this is, before embarking on any project, quality requirements and lead-time will be laid out in detail before any contract is activated. Once both parties agree on quality definitions and lead-times, a contract will be written up guaranteeing the work is completed within the defined requirements or services will be provided for free (if the requirements are not met, services completed up to that point will be given to the customer free of charge). I believe strongly in providing customers with what they are asking for. This may require layouts, previews of planned work, and extensively defining what is required previous to project kick-offs. I will do my best to set realistic expectations as far as lead-times go. I will also provide updates daily or weekly on the progress of each project and provide gantt charts if the customer desires. Thank you in advance for your inquiry and I look forward to doing business with you. Owner - Green University Engineering Fully Insured Services Provider Jacob Oestreich
$15/hr
MAY-CAD Designer
"I had a great time working with HERI and highly recommend him for CAD work." ⭐️⭐️⭐️⭐️⭐️ Reuben Mayaya (client from other platforms) From simple items to major projects, you're covered. You'll g... Read more
"I had a great time working with HERI and highly recommend him for CAD work." ⭐️⭐️⭐️⭐️⭐️ Reuben Mayaya (client from other platforms) From simple items to major projects, you're covered. You'll get customized solutions for personal, startup, and/or established company use. Get value and timely delivery in: *3D modeling: From images, sketches, 2D drawings, or existing 3D models, you will end up with great 3D models for your product from SolidWorks 2020 and all later versions. *CAD file conversions: You will get the appropriate files for 3D printing (.STL or. STEP), plasma cutting (.DXF), visualization (.PDF), and other processes (.OBJ, SLDDRW, JPEG, PNG, SLDASM, PARASOLID). *3D part modification: Be it fine-tuning, renaming, reconstructing, aligning, resizing, or any other modification to a model, you can rest assured that your work will be performed precisely and carefully. *Technical Drawings: I specialize in generating standardized production drawings. Engineering marks are used to carefully annotate every aspect, ensuring high-quality output for your product. *Photorealistic Rendering: Being an excellent Blender renderer, you can expect visually stunning and realistic designs that are distinctive to ensure that your designs leave a lasting impression. *Design for Assembly: From transparent or exploded perspectives, your product assembly will be clearly understood and provide a refined and visually appealing portrayal. If you seek to bring your vision to life with a reliable collaborator, I'm prepared to collaborate and turn your ideas, no matter how basic they may be, into a wonderful product.
$13/hr
MAY-CAD Designer
EDUCATION Tennessee College of Applied Technology- Murfreesboro, TN GPA: 3.8 Expected graduation: August 2019 Expected certification: Detail Drafter Diploma, Mechanical Drafter Diploma... Read more
EDUCATION Tennessee College of Applied Technology- Murfreesboro, TN GPA: 3.8 Expected graduation: August 2019 Expected certification: Detail Drafter Diploma, Mechanical Drafter Diploma CAPM, PMI Approved Course Expected certification: August 2019 Oakland High School- Murfreesboro, TN GPA: 3.8 Graduated with Honors May 2016 EXPERIENCE Technology Engagement Center - Murfreesboro, TN July 2019 Volunteer Instructor ATCO, Nissan - Murfreesboro, TN March 2018 - June 2018 Quality Inspector PROGRAMS/SKILLS Autodesk AutoCAD Autodesk Inventor Autodesk Fusion360 Microsoft Word/Excel HTML/CSS Python 3.0 Spanish- Limited Working Proficiency (S-2) *References and Working Samples are available upon request.
MAY-CAD Designer
I'm a highly motivated individual and have a unique ability to hyper-focus on major tasks. That combined with my strong discipline and time management skills makes me uniquely equipped to work as a fr... Read more
I'm a highly motivated individual and have a unique ability to hyper-focus on major tasks. That combined with my strong discipline and time management skills makes me uniquely equipped to work as a freelancer. I work best when I am able to set my own hours and timelines. I just graduated in May 2021 with an A.A.S. in CAD Drafting and Technology. I completed this program while working full time and being a single mother. I may not have years of experience, but my knowledge is fresh and I am ready to begin working immediately. In school I studied Solidworks, AutoCAD, SketchUp, Inventor, REVIT, GD&T, Manufacturing Processes, Working Drawings, Print Reading, Mechanisms, Physics, and Practical Problem Solving. I worked on a Design Project as well. In that class I designed from the ground up a folding bunk bed unit with a stay level desk and storage. I went above and beyond to design something useful and unique when I could have done the bare minimum and simply designed a single part like some of my classmates did. I am a firm believer in environmental accountability and sustainability. I am interested in designing furniture for small spaces made from sustainable or recycled materials, tiny houses, homeless shelters, storage sheds, or green-living homes.
<p style="margin: 0px; color: #333333; font-family: 'Century Gothic', sans-serif; font-size: 13px; text-align: justify;">idocz is a Calgary based service company that provides boutique business soluti... Read more
<p style="margin: 0px; color: #333333; font-family: 'Century Gothic', sans-serif; font-size: 13px; text-align: justify;">idocz is a Calgary based service company that provides boutique business solutions. <p style="margin: 0px; color: #333333; font-family: 'Century Gothic', sans-serif; font-size: 13px; text-align: justify;">idocz uses a holistic approach to support your document needs. Our backgrounds provide us with a unique ability to address the drafting and IT needs of document management, providing full life cycle solutions to support your documents. <p style="margin: 0px; color: #333333; font-family: 'Century Gothic', sans-serif; font-size: 13px; text-align: justify;">Like others, we perform data migration, execute workflow scanning, create search-enabled drawings and provide content management services; we set ourselves apart, however, by working to gain a true understanding of each of our clients allowing us to tailor make products that suit their needs better. <p style="margin: 0px; color: #333333; font-family: 'Century Gothic', sans-serif; font-size: 13px; text-align: justify;">We know that when some require the lowest cost, others may be looking to integrate the newest technologies. We can satisfy both, and everything in-between by customizing each of our services to match the unique needs of every one of our clients. <p style="margin: 0px; color: #333333; font-family: 'Century Gothic', sans-serif; font-size: 13px; text-align: justify;">idocz uses innovative technologies, value added services and a spectrum of employees, from industry leaders, to high value technicians to transform the problems you have into the solutions you need!
$50/hr
MAY-CAD Designer
I am focused on quality and customer service. I may take a bit longer but I will strive do the job right first time, so any problems we may encounter with the job will be dealt with as a matter of p... Read more
I am focused on quality and customer service. I may take a bit longer but I will strive do the job right first time, so any problems we may encounter with the job will be dealt with as a matter of priority, even after completion. I am contactable 7 days a week, evenings too, to discuss your needs.
$1/hr
MAY-CAD Designer
I am Graduate from pune university in mechanical engineering of 2016 batch Have completed my designing courses with creo 2.0, catia V5 and unigraphics NX 9.0 from Cad Cam Guru pvt ltd. pune Also hav... Read more
I am Graduate from pune university in mechanical engineering of 2016 batch Have completed my designing courses with creo 2.0, catia V5 and unigraphics NX 9.0 from Cad Cam Guru pvt ltd. pune Also have basic level experience with solidworks Currently working as an intern in a well known MNC company (global leading manufacturers of home and kitchen appliances) since MAY 2017 Have a good experince in plastic designs, 3D modelling, Sheetmetal work and drafting mostly in creo.
The Ishimbayev Law Firm offers specialized counsel for a variety of legal services, including corporate and small business law, real estate law, intellectual property law, and employment law. We also... Read more
The Ishimbayev Law Firm offers specialized counsel for a variety of legal services, including corporate and small business law, real estate law, intellectual property law, and employment law. We also represent clients from various industries. Our core values of integrity, transparency, high quality, and individual approach ensures you receive the highest value for your legal services. We are ready to effectively respond to any small business legal issue you may have. Please contact us today for a free consultation.
$50/hr
MAY-CAD Designer
My personal focus has been the quality of my work & models I create. I pay attention to what I'm creating, particularly regarding bad geometry that may not export or import very well into other system... Read more
My personal focus has been the quality of my work & models I create. I pay attention to what I'm creating, particularly regarding bad geometry that may not export or import very well into other systems. While reuse of models isn't always a requirement of customers, it has been a focus of mine. There's a huge benefit to being able to reuse models along with their drawings when using parametric CAD systems, especially for companies that produce similar products and product lines.
MAY-CAD Designer
<p class="MsoTitle"> <p class="MsoTitle"> <p class="MsoTitle">PRANAV PARIKH <p class="MsoSubtitle"><em>32/A, Mahavir Park Soc.,</em> <em>Nr. Nalanda Water Tank, </em> <em>Waghodia Road,</em... Read more
<p class="MsoTitle"> <p class="MsoTitle"> <p class="MsoTitle">PRANAV PARIKH <p class="MsoSubtitle"><em>32/A, Mahavir Park Soc.,</em> <em>Nr. Nalanda Water Tank, </em> <em>Waghodia Road,</em> <p class="MsoSubtitle"><em>Vadodara, Gujarat 390019</em> <p class="MsoSubtitle"> <p class="MsoSubtitle">http://in.Linkedin.com/pub/parikh-pranav/16/919/b30 SUMMARY I am a Mechanical Engineer having wide Industrial experience of 7.5 years, in different fields of engineering and management, i.e. Developments (Product, Vendor and Systems Development), Design (Heat Exchangers, Automates & Semi Automates and Generator Rewind kits), Project Management (SPM projects right from concept to warranty period handling), Reverse Engineering & Optimization (SPM, Generators). EDUCATION Faculty of Technology & Engineering, M S University of Baroda, Gujarat — B. E. Mechanical, 2004 EXPERIENCE Engineer-Generator Product Alstom India Ltd Vadodara, Gujarat — Dec 2010-Present <strong>Alstom </strong>is a world leader in transport, power generation and transmission. Our plant is in retrofit, service and spares supply business of Generators of Thermal Power plants, for Asia-Pacific region. Accomplishments ● Study of OEM Generator Stator Design and BoM ● Designing spares kit for OEM Generator Stators ● OOEM Generator Stator Reverse engineering ● Modeling of OOEM Stator with measured value ● Design of complete stator rewinding kit for OOEM ● Supporting Stator bar production tooling and mfg. Sr. Executive-Machine Design & Project Management FAG Roller Bearings (I) Pvt Ltd Vadodara, Gujarat — May 2006-Nov 2010 <strong>FAG Roller Bearings Pvt Ltd. </strong>belongs to world’s one of the most dynamic business groups, <strong>The Schaeffler Group.</strong> We were in design and manufacturing of special purpose machinery and equipment as well as complete solutions for troubleshooting for bearing production and processing for our group companies all over the world. Accomplishments ● Designing SPMs ● Study of existing SPM design and improvisation ● SPM project management ● Production line installation ● SPM rebuilding and overhauling ● Cost cutting and cost control activities for SPM building projects ● SPM assembly management ● Tool design and tool management ● CIP activities, Fit for Quality, MOVE, etc. ● Trainer for new systems in departments as well as FfQ for India plants Sr. Engineer-Product & Vendor Development Standard Radiators Pvt. Ltd Vadodara, Gujarat — Dec 2004-Apr 2006 Standard Radiators is a private company in India, supplying heat exchange solutions for automobiles. We supplied radiators, heater cores, etc. to different automobile companies worldwide. Accomplishments ● Design of heat exchangers for an export shipment. ● Developing all facilities for manufacturing of designed heat exchangers. ● Carrying out analysis for quality improvement by applying Six Sigma methodology as a team member and a Six Sigma (Green Belt) trainee ● Supplier development activities for manufacturing according to design requirements SKILLS <strong>Engineering Skills:</strong> EnggDrawing, Machine Assembly, SPM Design, Automation, Pneumatics, Hydraulics, Bearing mfg., Machine Installation, Tool design, Honing Machine, Gauge Calibration, Machine disassembly, Reverse Engg, Plant Layout, SPM Rebuilding & Overhauling, Production Line Installation and Approval, Fabrication, Generator Rewind Kit, Stator Bar Design, Design generalization. <strong>Management Skills: </strong>6σ, 5S, KAIZEN, POKAYOKE, Product Development, Vendor Development, PPAP, Fit for Quality, MOVE, Project Management, Visuals Management, Work Environment Improvement, Personnel Training, Tool Management, Project Planning, Cost Reduction, Design Optimization. <strong>Software Skills: </strong>AutoCAD, Pro/Engg, Pro/Intralink, CATIAV5, VPDM, RPDM, Inventor, Language C, Language C++, Language FORTRAN, MS Office, MS Access, MS Projects, ANSYS(training going on). <strong>Language Skills: </strong>English, Hindi, Gujarati, German, French. REFERENCES Available on Request
$8/hr
MAY-CAD Designer
Total Experience : 19 years’ experience in 3D Modeling, AutoCAD and Micro station Drafting, Fabrication Drawing Checking, prepared Bar Bending Schedule & Quantity Estimation of RCC Structures. Wo... Read more
Total Experience : 19 years’ experience in 3D Modeling, AutoCAD and Micro station Drafting, Fabrication Drawing Checking, prepared Bar Bending Schedule & Quantity Estimation of RCC Structures. Working Field : Power Plant, Oil & Gas and Infrastructure Designation : Civil & Structural Modeler & Designer Using Software : Auto Cad, Micro Station-V8XM, PDS, Navisworks,CADMS, MS OFFICE, Navigator, TEKLA structure-16 (modeling Only), SP-3D(Training) Educational Qualification : Bachelor of Civil Engineering (2013)-60.50% From JamiaMilliaIslamia, New Delhi, Government of India, : Diploma In Civil Engineering (2003) -74.90% From Hooghly Institute of Technology, Government of West Bengal : I.T.I in Civil Draughtsman (1998) - 65.87% From I.T.I. Howrah Homes. Santragachi, Government of West Bengal :Madhyamik (1992) – 46.11% From Howrah RabindraVidyaMandir (Dist.-Howrah, West Bengal) Detailed Work Exposure : From June 2018 to till now Self working in my won field ( ex: building planning, lump sum quantity estimation etc.) I Name of Company : ENGINEERS INDIA LIMITED (Delhi) (contract-O&G Agency) From 24th Marc 2017 to May 2018 Designation : Civil & Structural Modeler Projects : 1. PVPL : All 3D Model of project 2. SRU REVAMP : All 3D Model of project 3. LEAN GAS COMPRESSOR AT HAZIRA : Compressor house and pipe rack. II. Name of Company : GS E&C Delhi Pvt. Ltd. (Gurgaon Campus) From 16th May 2013.to 6th October 2016 Designation : Civil & Structural Modeler (V) Projects : 1. RABIG II REFINING AND PETROCHEMICAL PROJECT Client: Aramco Overseas Company B.V & Sumitomo Chemical Co. Ltd. 2.WARA PRESSURE MAINTENANCE PROJECT Client: KUWAIT OIL CO. K.S.C 3.AEGEAN REFINERY PROJECT (ARP) Client: Star Refinery A.S 4. CLEAN FUELS PROJECT (CFP) Client: KNPC III. Name of Company : L&T- SARGENT & LUNDY LIMITED (Faridabad Campus) From 18th December 2008.to 15thMay 2013 Projects : 1. QURAYYAH INDEPENDENT POWER POJECT - 4000 MW (COMBINED CYCLE) Client: Hajir Electricity Production Company. RAJPURA THERMAL POWER PROJECT- 2X700 MW Client: NABHA Power Limited. 3. GHECO-ONE COMPANY 660 MW COAL-FIRED POWER PLANT Client: GHECO-ONE Company Limited. IV. Name of Company : DEVELOPMENT CONSULTANTS PVT. LTD.(New Delhi) From 17th November 2007 to 17th December 2008. Projects : 1. 2 X 250MW PARICHHA THERMAL POWER STATION (UNIT #5 & 6) 2. SURATGARH THERMAL POWER STATION. (1X250M.W) 3. BHUSHAN POWER & STEEL LTD. V. Name of Company : STUP CONSULTANTS PVT. LTD. (New Delhi) from 27th September 2006 to 16th November 2007. Projects : 1. DELHI METRO RAILWAY CORPORATION LTD. 2. ROAD OVER BRIDGE IN LIEU 3. FLOATING JETTY ON RIVER GANGA AT ALLAHABAD 4. FLOATING JETTY ON RIVER GANGA AT PATNA. 5. WHEEL PLANT AT CHHAPRA. VI. Name of Company : RDA CIVIL ENGINEERING SYSTEMS PVT. LTD. (New Delhi) From 12th April 2006 to 26th September 2006. Projects : 1. HOSTEL BUILDING OF IIM NOIDA. Working Area : Preparation of Design Drawings, Detail Drawing & Quantity estimate. 2. ANKITA RESIDENCY AT NOIDA. Working Area : Preparation of Design Drawings, Detail Drawing & Quantity estimate. VII. Name of Company : ASHRAY ARCHITECTURAL & STRUCTURAL CO. (HOWRAH) From 1st December 1998 to 28th March 2006 Designation : Civil & Structural Draughtsman Responsibility : Preparation of Design Drawings (concrete) & Quantity estimate. Supervision of Residential Building
MAY-CAD Designer
MAY-CAD Designer
Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1 OBJECTIVE: To obtain a position within a large dynamic company wh... Read more
Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1 OBJECTIVE: To obtain a position within a large dynamic company where there are opportunities for growth and development. CAREER PROFILE: § Excellent interpersonal skills with an ability to work effectively with individuals at all levels. § Soft skills: Strong team work attitude and ability to motivate the team members, significant communication skills, problem solving attitude, fast and multi-task execution capabilities, strong analytical mind set and imaginative problem solving ability. PROFESSIONAL EXPERIENCE: PGESCo, Power Generation Engineering Service Company Consultant BECHTEL Partner Title : Senior Plant Design Engineer • Professional knowledge: clear and solid knowledge of all the plant design, piping engineering related activities & Interaction with Process Licensor including review of P&IDs & Preparation of Piping Design Basis. General Layout (Site Plan) & Piping Design Criteria Equipment Layout Plan (Unit Plot Plan) Piping Assembly Drawings Key Plan , U/G Piping Composite dwg.(s) Piping routing studies & Underground system routing Piping & Instrumentation Diagrams (P&IDs) , Line List Piping Specifications (e.g. supply, material, dimensional, fabrication, erection / installation, welding incl. equipment welding, testing, PMI, insulation) List of piping special components & Material take off (Bill of Material) Technical Bid Evaluation & vendor documentation for piping material 3D- Model , Piping isometric design and issue procedure Piping isometric list , drawing Pipe support specification ,summary & check . • Piping Material and Valve Material Specifications • 3-D Modeling and layout design. • Ensuring compliance with Procedures, Work-instructions and Check-lists • Arranging 3-D Model and checking dwg. And Isos • Equipment design (Tanks ,heat exchangers, Pumps, Compressors ………etc ) • Drafting composite drawings and extracting Isometrics. • Responsible Engineer for the Plant layout , Plant General Arrangement & Equipment Locations ) • Check and review Project /vendor, Contractors drawings. • Issue of Design Change Requests/Notes and Man-hour Change Orders • Site interface and support/co-ordination • Standardization (e.g. Updating of Specifications, Technical Notes) • Responsible Engineer of (waste/water treatment & desalination water) packages. • Coordination with other disciplines (Electrical, Civil, Archtiecture, Control,etc) • Coordination with Site Construction Managers/Other Responsible Engineers. Since May 2008 to Nov.2012 • Project shared in : EL-TEBBIN Power plant 2*350MW ,ABOU-QIR Power plant 2*650 MW,EL-SOKHNA “Super Critical” Power Plant 2*650 MW , El-Suez power plant 650 MW ARAB CONTRACTORS CAMEROON LTD YAOUNDI –OLAMA (ROAD CONS. PROJECT), CAMEROON Since 2007 to 2008 §Site & Tech.office Manager of (Asphalt Mixing /Concrete) Plants and Asphalt equipment &Spray bitumen tanks trucks, compactors, .etc). (Cameroon-Yaoundé 2008) §Controller and Tech.operator for all kinds of asphalt /Concrete plants ARAB CONTRACTORS “OSMAN AHMED OSMAN” Transportation projects sector (Roads and railway projects), Cairo Since 2003 to 2007 §Maintenance, Repair and Designer engineer for all No. of eleven ASPHALT MIXING PLANT. (Cairo 2003) §Manager of asphalt pavement sector. (2004) §Manager for all No. of elevens ASPHALT MIXING PLANT. (2005-2007) §Visitor lecturer in (MTI-MANAGEMENT &TECHNOLOGY INSTITUTE) (2005-2007) Sugar Industrial Integrated Co., Hawamdeya, Cairo 2002-2003 Associate Industrial and designer engineer §Learning a full description of the sugar industry techniques. § Completed studies and validations on all stations in the factory started at milling and ended at packing stations and the control stations. § Completed studies and validations on all equipment used on the production floor. § Completed studies on the processes and instrumentations diagram (P&ID) of the factory. § Dealing with the factory’s software packages which used in the design and the analysis of the piping, structure and equipment. §Learning the creation of change requests required to amend standard operating procedures. § Conducted trouble-shooting investigations prior to the start up of new production lines. §3-D Modeling and stress analysis calc. § Provided general support to the B.Sc. Project. Army Factory 909 of Engines, Helwan, Cairo Training & work 2000-2002 Engineering Assistant (Summer Placement) § Assisted with the creation of Auto-CAD drawings. § Completed evaluation forms on CNC machines as detailed by the Senior Engineers § Filed and typed up engineering data. § Devised layout drawings on Auto-CAD for the review of the Senior Engineer. § Completed studies and validations on all equipment used on the production floor. § Provided Engineering support for each production area. § Provided general support to the department. EDUCATION: Cairo University, Cairo, Egypt July 2003. BSc. in Machine design and production. Excellent degree in B.Sc. project. Headway University, California, USA, April 2012 MSc.in Mechanical Science Engineering ASME Professional member SPED Professional member PROJECT HISTORY: Project name is “Computer aided design for an industrial piping network “. The goal of my project to give a complete modeling of an evaporation station used in sugar industry techniques and to perform stress analysis on the main pipelines feeding the evaporators. From the main objectives of the project is studying the various types and features of pipe fittings and its accessories including materials, codes, design conditions, design rating and pressure &temperatures rating. Software packages used in project: • AUTOPLANT packages (STEEL_STRUCTURAL, EQUIPMENT, and PIPING). • AUTOPLANT (P&ID) PACKAGE • AUTOPIPE PLUS (stress analysis) package. • COSMOS/M package(finite element analysis) • AUTOCAD 2000 package. ADDITIONAL INFORMATION & Skills: Proficient in the use of: • Autodesk Autocad (2D-3D)2000-2002-2004 • Bentley AutoPlant 3D (STEEL_STRUCTURAL, EQUIPMENT, PIPING). • AUTOPLANT (P&ID), Material Database. • AUTOPIPE PLUS(stress analysis) • COSMOS/M package(finite element analysis) • Smart Plant 3D “Intergraph Package” • Smart Sketch 3D “Intergraph Package” • Inventor 8 ,11 • Microstation/J • 3DM “BECHTEL confidencial programe package” • Pipeflow programe package • Mechanical desktop • 3DMAX CAD 09 • Intelligent CAD 2001 • Visual basic • Microsoft Word, Excel, PowerPoint, Photoshop • Courses completed through study include Thermodynamics, Machine Design, Heat Transfer, quality control, management, CNC programming, Plant engineering, metal forming…..etc. • Familiar & Courses attended (ASME B31.1,B31.3 …etc) and ANSI ,NFPA ,API ,AWWA,OSHA,Valves Selection…………etc codes ,Specifications and standards • Many Seminars/Conferences were be attended in/out work field • Good knowledge in Electric /Control. • Languages: Fluency in spoken & written English. PERSONAL DETAILS: Date of birthday: 12 February 1980 Religion: Muslim Marital status : Married and have a Son. Military service: done Drive license: Valid INTERESTS: Football, Reading, Travel, Internet.
I'm just an aspiring designer who makes things for fun and for friends to mess around with! I may be young in comparison to most 3D designers but I enjoy every minute in Maya - which is the software I... Read more
I'm just an aspiring designer who makes things for fun and for friends to mess around with! I may be young in comparison to most 3D designers but I enjoy every minute in Maya - which is the software I am most adept at.
MAY-CAD Designer
<p class="MsoTitle" dir="RTL"><em>Sherif Mohamed Abd El-Nour Abd El-Magid &... Read more
<p class="MsoTitle" dir="RTL"><em>Sherif Mohamed Abd El-Nour Abd El-Magid </em> <strong>Piping Designer</strong> <strong>Sr. Cad Designer</strong> <strong> _________________________________________________________________________________</strong> <strong>OBJECTIVE:</strong> <strong>Seeking a Challenging Career in a Petroleum (Oil & Gas) or Construction Company Whereby My Designing and Drafting Background, Previous Work Experience, </strong> <strong>and Managerial Skills can be Applied.</strong> <strong>PERSONAL INFORMATION:</strong> <strong>Date of Birth: 17-1-1970</strong> <strong>Address: 20 Mohamed El-Sayed Hyba from Abu El-Fadel St., </strong> <strong> El-Zawia El-Hamra, Cairo. Egypt.</strong> <strong>Military Status: Finished</strong> <strong>Marital Status: Married</strong> <strong>Nationality: Egyptian</strong> <strong>Religion: Moslem</strong> <strong>EDUCATION:</strong> <strong>Diploma of Industrial Technicality, Mataria Institute of Industrial Technique</strong> <strong>Department: Mechanical</strong> <strong>Graduation Date: May 1992</strong> <strong>Overall Grade: Good</strong> <strong>LANGUAGE SKILLS:</strong> <strong>Arabic: Mother tongue</strong> <strong>English: Very good command of both written and spoken</strong> <strong>PROFESSIONAL SKILLS:</strong> <ul> <li><strong>Familiarity with International codes & standards.</strong></li> </ul> <ul> <li><strong>18 YEARS EXPERIENCE IN THE FIELD OF MECH. WORKS DESIGN </strong></li> </ul> <strong> AND DRAFTING INCLUDES:</strong> <ul> <li><strong>EQUIPMENT ORIENTATION (following Data Sheets).</strong></li> <li><strong>PIPING ROUTING (following P& ID's) FOR EQUIPMENT</strong></li> </ul> <strong>SUCH AS PRESSURE VESSELS, TANKS, TOWERS, </strong> <strong>EXCHANGERS AND PUMPS.</strong> <ul> <li><strong>SITE LAYOUTS AND PLOT PLANS DRAWINGS.</strong></li> <li><strong>PLANS, SECTIONS & DETAILS DRAWINGS.</strong></li> <li><strong>SHOP DRAWINGS.</strong></li> <li><strong>ISOMETRICS AND BILL OF MATERIALS.</strong></li> <li><strong>MECHANICAL DRAWINGS FOR MACHINE ROOMS.</strong></li> <li><strong>UNDERGROUND DRAINAGE NETWORKS.</strong></li> <li><strong>TREATMENT STATIONS.</strong></li> <li><strong>ANIMATION FOR MORE DETAILS AND REPRESENTATION.</strong></li> </ul> ______________________________________________________________________________________ <strong>COMPUTER SKILLS:</strong> · <strong>Very good Knowledge of Computer Hardware.</strong> · <strong>Very good Knowledge of Various Operating Systems (DOS / Windows )</strong> · <strong>Very good Knowledge of Many Applications Running Under </strong> <strong>Microsoft Windows (Including Microsoft Office Applications).</strong> · <strong>Very good Knowledge of </strong><strong>PDS</strong><strong> system.</strong> · <strong>Very good Knowledge of </strong><strong>PDMS</strong><strong> system.</strong> · <strong>Very good Knowledge of </strong><strong>Smartplant Review.</strong> · <strong>Very good Knowledge of </strong><strong>ORTHOGEN.</strong> · <strong>Very good Knowledge of </strong><strong>MICROSTATION Program (2D - 3D).</strong> · <strong>Excellent Knowledge of </strong><strong>AutoCAD Program (2D - 3D).</strong> · <strong>Very good Knowledge of </strong><strong>CADWorx Application.</strong> · <strong>Good Knowledge of </strong><strong>AutoPLANT Application.</strong> · <strong>Good Knowledge of </strong><strong>PlantSpace Application.</strong> <strong>______________________________________________________________________________________</strong> <strong>WORK EXPERIENCE</strong><strong>:</strong> <strong>I WORK FOR</strong><strong>CB&I Lummus L.L.C.</strong> Position<strong>: Sr. PIPING DESIGNER & LEAD CAD DESIGNER</strong> Dec. 2010 – Present Member of <strong>Reficar</strong> project design group (<strong>PDS</strong>, <strong>ORTHOGEN, MicroStation</strong> & <strong>AutoCAD</strong>). Tasks Accomplished Included: · <strong>Preparing 3D-Equipment Models (following Data Sheets).</strong> · <strong>Preparing 3D-Piping Models (following P&ID).</strong> · <strong>Preparing Supports in Models for Stress Analyses review.</strong> · <strong>Extract and Check ISO's.</strong> · <strong>Coordinate with Process Dep. To reroute lines according to P&ID updates.</strong> · <strong>Coordinate with Stress Analyses to achieve optimum supporting and routing as possible.</strong> <strong>TEAM LEADER</strong> Tasks Accomplished Included: · <strong>Extract 2D by DRAWING MANAGER MODULE.</strong> · <strong>PRODUCE DWG & DGN FORMATS WITH ORTHOGEN.</strong> · <strong>FINISH AND COMPLETE 2D WITH FULL DATA AND DETAILS</strong> <strong> by AutoCAD & MicroSTATION.</strong> <strong>I WORKED FOR</strong><strong>CB&I Houston</strong> Position<strong>: Sr. PIPING DESIGNER</strong> July 2010 – Dec. 2010 Member of <strong>Reficar</strong> project design group (<strong>PDS</strong>, <strong>Microstation</strong> & <strong>AutoCAD</strong>). Tasks Accomplished Included: · <strong>Preparing 3D-Models by PDS (included P&ID and Data Sheets).</strong> · <strong>Clash Check Reports.</strong> · <strong>Extract ISO's</strong> · <strong>Extract 2D with DWG & DGN formats by ORTHOGEN.</strong> · <strong>FINISH DRAWINGS WITH FULL DATA AND DETAILS.</strong> <strong>I WORKED FOR</strong><strong>CB&I Lummus L.L.C.</strong> Position<strong>: Sr. PIPING DESIGNER </strong> Aug. 2007 –July 2010 Participated in <strong>NAGARJUNA</strong> project (PDMS & AutoCAD). Tasks Accomplished Included: <p dir="RTL">Member of <strong>NAGARJUNA</strong> Project team, Participated in Preparing the Modeling as following: <p dir="RTL">- Check Conditions for lines to update from latest Line List. <p dir="RTL">- Check Clashes for lines to release it from Model. <p dir="RTL">- Coordinate with Stress Analyses to achieve optimum <p dir="RTL"> supporting and routing as possible. <p dir="RTL">- Coordinate with Process Dep. To reroute lines according to <p dir="RTL"> P&ID updates. <p dir="RTL">- Coordinate with Instrumentation Dep. To update Sets and <p dir="RTL"> Hook-Up’s. <p dir="RTL">- Coordinate with Electrical Dep. To arrange locations of <p dir="RTL"> Lighting Devices. <p dir="RTL">- Extract ISO’s for Checking. <strong>______________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong>HEAVY ENGINEERING INDUSTRIES AND</strong> <strong>SHIPBUILDING CO. (K.S.C)</strong> Position<strong>: PIPING DESIGNER </strong> Apr. 2006 – Jun 2007 PARTICIPATE IN SEVERALJOBS FOR <strong>K.O.C</strong> Tasks Accomplished Included: · <strong>Preparing Equipment Orientation.</strong> · <strong>Preparing Equipment Piping.</strong> · <strong>Preparing Piping Routing. </strong> · <strong>Preparing Pipelines Networks.</strong> · <strong>Preparing Mechanical Drawings & Details.</strong> · <strong>Plot Plans.</strong> · <strong>Site Layouts.</strong> · <strong>Piping Plans & Sec's.</strong> · <strong>Piping Isometrics & MTO.</strong> · <strong>3D View Perspective.</strong> · <strong>Modeling & ISOgen.</strong> <strong>____________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong>SIEMENS</strong><strong> Industrial Solutions and Services</strong><strong>.</strong> Position<strong>: PIPING DESIGNER </strong> Sep. 2004 – Mar. 2006 Participated in <strong>EAST DELTA </strong>piping treatment project And other Electromechanical Projects Tasks Accomplished Included: · <strong>Preparing Mech. & Piping Works. </strong> · <strong>Preparing SECTIONS & DETAILS.</strong> · <strong>Preparing ROUTING OF PIPING NETWORKS.</strong> · <strong>Preparing ISOMETRICS & MTO.</strong> · <strong>Preparing SHOP DRAWINGS.</strong> <strong>______________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong>SAUD CONSULT EL</strong><strong> KHOBAR.</strong> Position<strong>: CAD SUPPORT </strong> Mar. 2003 – Feb. 2004 Participated in <strong>KHAFJI </strong>project for<strong>ARAMCO</strong> Tasks Accomplished Included: · <strong>Preparing DRAWING PLANS. </strong> · <strong>Preparing SECTIONS & DETAILS.</strong> · <strong>Preparing ISOMETRICS & MTO.</strong> · <strong>Preparing SHOP DRAWINGS.</strong> · <strong>Repairing and Converting for DGN & DWG files.</strong> · <strong>Trainer ( MicroStation ).</strong> <strong>______________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong>ENPPI</strong> Position<strong>: PIPING DESIGNER </strong> May 2001 – Mar. 2003 Participated in Several Petroleum & Industrial Projects Tasks Accomplished Included: · <strong>Preparing Equipment Orientation & Piping (Vessels, Towers, Tanks, etc.).</strong> · <strong>Preparing Piping Routing for Networks.</strong> · <strong>Preparing Modeling.</strong> · <strong>Preparing Mechanical Drawings for Pump Stations.</strong> · <strong>Preparing Shop Drawings & Details.</strong> · <strong>Plot Plans.</strong> · <strong>Site Layouts.</strong> · <strong>Piping Plans.</strong> · <strong>Piping Isometrics & MTO.</strong> <strong>_____________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong>ABB</strong><strong>petroleum</strong> Position<strong>: PIPING DESIGNER & Sr. MECH. DRAUGHTSMAN</strong> Apr. 2000 – Apr. 2001 Participated in <strong>ACPA</strong> project Jobs Accomplished Included under & above ground: · <strong>Preparing Underground Oily Piping Design System.</strong> · <strong>Preparing Details.</strong> · <strong>Preparing Piping General Arrangement of Tanks Farm.</strong> · <strong>Preparing Piping Isometrics & MTO.</strong> <strong>______________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong> ZUHAIR FAYEZ Misr</strong> Position:<strong> MECH. DRAUGHTSMAN</strong> Jan. 98 - Apr. 2000 Participated in many of Electromechanical Projects Tasks Accomplished Included: · <strong>Preparing DRAWING PLANS.</strong> · <strong>Preparing SECTIONS & DETAILS.</strong> · <strong>Preparing ISOMETRICS & MTO.</strong> · <strong>Preparing IRRIGATION SITE LAYOUTS.</strong> <strong>______________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong>SAUD CONSULT Misr</strong> Position:<strong>MECH. DRAUGHTSMAN</strong> Jan. 96 - Dec. 97 Participated in many of Electromechanical Projects Tasks Accomplished Included: · <strong>Preparing DRAWING PLANS.</strong> · <strong>Preparing SECTIONS & DETAILS.</strong> · <strong>Preparing ISOMETRICS & MTO.</strong> · <strong>Preparing SHOP DRAWINGS.</strong> · <strong>Preparing 3D-DRAWINGS.</strong> <strong>______________________________________________________________________________________</strong> <strong>I WORKED FOR</strong><strong> GARNO Misr</strong> Position:<strong> PIPING, MECH. DRAUGHTSMAN</strong> Jan. 95 - Dec. 95 Participated in <strong>KHARGA</strong> treatment stations Tasks Accomplished Included: · <strong>Preparing DRAWING PLANS.</strong> · <strong>Preparing SECTIONS & DETAILS.</strong> · <strong>Preparing ISOMETRICS & MTO.</strong> · <strong>Preparing SHOP DRAWINGS.</strong> · <strong>Preparing 3D-DRAWINGS.</strong> <strong>______________________________________________________________________</strong> <strong>Time Before </strong> <strong>I Worked For Different Companies As a Beginner Under Training.</strong> <strong>______________________________________________________________________</strong>
MAY-CAD Designer
Last updated: Nov 29, 2024
