Hire the best freelance Mechanical Engineering Calculations expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Ma... Read more

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Material Selection & Load Calculation on Structural Beam. • Mechanical Engineer working on Basic (conceptual) and detailed engineering designs for sectors like power plant, process plant and waste water treatment plant. • Mechanical Design Engineer who have worked on different projects & handled a challenging technical development position on Precision Sheet Metal Enclosure Designing using Solid Works and AutoCAD.

Mechatronics engineering. Mechanical engineering and CAD specialist. Part modeling, machine and electro-mechanical system design. Gadget design and programming. Cnc machine design(mills, automatic... Read more

Mechatronics engineering. Mechanical engineering and CAD specialist. Part modeling, machine and electro-mechanical system design. Gadget design and programming. Cnc machine design(mills, automatic welders, drills, plotters, 3D printing, lathes) Convert pdf, jpg to technical drawings and 3D models. I am actively programming microcontrollers for the past 5 years(c, c++, java, python). PLC programming and automatisation. I have been an active member of some national projects: Montenegrin Wearable Robots Formula Student Montenegrin Autonomous Vehicles In these projects my role was designing electro-mechanical systems, 3D/2D/tehnical drawing, microcontroller programming.. My finishing project on faculty was cnc plotter machine, with A3 format of drawing/writing. Currently, I am working on 5 axis cnc metal milling machine for my master thesis.

I work as a product design engineer. I have good grasp in technical process specially in fabrication. I am a flexible person, straightforward, and result oriented. Communication is the KEY on this kin... Read more

I work as a product design engineer. I have good grasp in technical process specially in fabrication. I am a flexible person, straightforward, and result oriented. Communication is the KEY on this kind of setup. Here is a list of things I can help you with CAD software. •Part drawing •Assembly drawing •Installation/ assembly manual •Product presentation •3D concept design •Dimension •File Conversions

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following service... Read more

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following services design 3D models 3D rendering with high quality image 3D assemblies 3D animations 3D printing with checked stl files on shapeways simulations Make 2D drawings sheet metal working ,weldments i will be using soildworks visualize,photoview 360 and keyshot program for rendering Offers: unlimited revisions Quality work within the specified time frame

I am a hardworking, responsible and creative person. I am open to work with new projects connected with both design-related 3D-presentations starting from creation of 3D models to animation and render... Read more

I am a hardworking, responsible and creative person. I am open to work with new projects connected with both design-related 3D-presentations starting from creation of 3D models to animation and rendering, and mechanical engineering: calculations, development of drawings as well as 3D modeling (hydraulics, metal constructions, electromechanical equipment, dies, molds, mine equipment, concrete mixers, batching plants and other). I will dedicate all my skills and efforts to provide you with quality products.

We provide services & consulting in different areas: -Design of machines, assemblies and parts. -3D Design using SolidWorks, Catia, MegaCAD, Inventor, AutoCAD, Unigraphics-NX, Adobe Photoshop, Cinem... Read more

We provide services & consulting in different areas: -Design of machines, assemblies and parts. -3D Design using SolidWorks, Catia, MegaCAD, Inventor, AutoCAD, Unigraphics-NX, Adobe Photoshop, Cinema 4D, Rhinoceros 5. -Analysis of structures and mechanical stress(FEA) using Ansys, SolidWorks. -3D Printing, CNC milling of plastics and metal, 3D Scanning with reverse engineering and Mould Design. -Electrical Engineering, PCB design, circuitry in Altium Designer. -CAD Rendering, Product Design, Enclosure Design. -Technical Writing: English, German.

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Des... Read more

BS in Mechanical Engineering, MS in Ocean Engineering, Registered PE, SolidWorks CAD, GD&T, MapleSoft, Ocean Surface and Sub Surface Equipment, Weldments, Sheet Metal, Instrumented Pressure Vessel Designs, Wind and Wave Loads on Structures.

R&D Engineering Group with more than 15 years experience in the fields of product development and mechanical design engineering. Worked on numerous projects developing and innovating mechanical design... Read more

R&D Engineering Group with more than 15 years experience in the fields of product development and mechanical design engineering. Worked on numerous projects developing and innovating mechanical designs for the manufacturing of parts and assemblies in the airspace industry (Airframe design; Aircraft systems design {air, hydraulic, fuel, flight control, electric}, Aircraft interiors design, Analysis {Stress, Fluid Dynamics}, Complex Training Flight Simulator design, Test benches design, Design of tools; Preparation of maintenance documentation).

My name is Thomas White and I hold a Bachelor of Science in Mechanical Engineering. I grew up in the city of Chico, Ca. A small town approximately 80 miles north of the capital of Sacramento. Growing... Read more

My name is Thomas White and I hold a Bachelor of Science in Mechanical Engineering. I grew up in the city of Chico, Ca. A small town approximately 80 miles north of the capital of Sacramento. Growing up I was always fascinated by the way the world works in both social and scientific ways. I enlisted in the United States Marine Corps right out of high school and explored the world and its many cultures. It was here that I learned the essentials of leadership, and where my decision to walk the path of personal development began. Upon returning home, I set off on a new career path and decided to undertake the challenge of an engineering curriculum. During that time I met many like minded people and garnered a new set of skills, and a tenacity for excellence. As a young aspiring technical professional, I seek to continue to improve myself. I found that Modeling and Simulation is an area that I excel at and use to continually exercise my engineering judgement and find new ways to approach the analysis of a problem. As I traverse down this path of technical enlightenment, I increasingly remind myself of the things that I have learned from my many experiences at home and abroad, and never disrespect the high value of total mission accomplishment.

▪ Electrical and Mechanical Design Engineer on island residential buildings projects. (Luxury buildings, renovations) ▪ Project manager's assistant. Filling timesheets and day-by-day work management... Read more

▪ Electrical and Mechanical Design Engineer on island residential buildings projects. (Luxury buildings, renovations) ▪ Project manager's assistant. Filling timesheets and day-by-day work management. Visits on field and coordination with the contractors. ▪ Quantity surveyor. Coordination with the HVAC, electrical materials and equipment suppliers. ▪ Underfloor heating/cooling, Fan Coil Units, VRV systems sizing, and installation supervisor. ▪ MEP systems Cost estimation. ▪ Swimming pool mep designer ▪ European codes knowledge --------------------------------------- ▪ Electrical MEP Design Engineer using REVIT and AutoCad 2D software ▪ Multifamily projects Technical Study and Design ▪ Technical Study on buildings' Energy efficiency using COMCheck software ▪ USA National Electrical Code knowledge ▪ NFPA knowledge (fire alarm and emergency lighting, smoke and carbon detecting systems design) ▪ Coordination with Architects, Project Managers, Local Authorities ▪ Working on projects based on USA structural sector ▪ Site Lighting design, Photometric studies (Visual Software) ▪ Lighting and power layout design (Interior and Exterior), One-line and Multi-Line diagrams, Electrical panels design, Motors sizing, ▪ Breaker and Feeder cables Sizing ▪ Fire Pumps, Diezel Fire Pumps, Generators, Interior transformers design and sizing using Product cutsheets. ▪ Shop Drawing and Request for Information responses ▪ CCTV and Telephone risers design and knowledge

I am a seasoned, Mechanical Design Engineer with work experience of 12 years in many industries and expertise to develop standards for anything from materials to products, specs to process specs, and... Read more

I am a seasoned, Mechanical Design Engineer with work experience of 12 years in many industries and expertise to develop standards for anything from materials to products, specs to process specs, and operating procedures. I would bring to you a great deal of experience in everything and anything required to develop quality products, process planning, verification, and validation of design. Strong domain knowledge in design: Plastics Injection Mould Design, Valve - casting & Forging, Industrial Pumps, Special purpose Machines, Injection molding machines, blow molding machines, extruders, heat exchangers and pressure vessels.

Mechanical Design engineer with experience in various industries and vast CAD experience. I enjoy being creative in product design to get great results with simple solutions and will provide efficient... Read more

Mechanical Design engineer with experience in various industries and vast CAD experience. I enjoy being creative in product design to get great results with simple solutions and will provide efficient customer services to help you get the best results. I can offer you- Quality design and development consultancy. Detailed CAD with engineering drawings. Product Design. Market research. Manufacturing/ assembly design. Mechanical engineering calculations.

Im an mechanical engineer and work professionally in the field of oil internals equipment design, i'm professional at Salidworks and have a design experience in innovation and creativity Read more

Im an mechanical engineer and work professionally in the field of oil internals equipment design, i'm professional at Salidworks and have a design experience in innovation and creativity

I am an experienced Mechanical Engineer having 12+ years of experience in steel industry. Now I am working in a MNC (Primetals Technologies India Pvt. Ltd. A joint venture of SIEMENS & MITSUBISHI Heav... Read more

I am an experienced Mechanical Engineer having 12+ years of experience in steel industry. Now I am working in a MNC (Primetals Technologies India Pvt. Ltd. A joint venture of SIEMENS & MITSUBISHI Heavy industries.) I am working in design department of Casting & Rolling division.

I was born in Paysandú Uruguay an agro-industrial city, worked with my father in machine repairing. I studied automotive mechanical maintance and worked two years. Then i went to Montevideo to study M... Read more

I was born in Paysandú Uruguay an agro-industrial city, worked with my father in machine repairing. I studied automotive mechanical maintance and worked two years. Then i went to Montevideo to study Mechanical Engineering. I worked on installation and maintance of elevator systems, now i´m working like a assistant professor on Mechanical engineering of Material Science and Technology courses. My final degree project was the design of a MPF machine (multi point forming) of 50 ton of capacity, with compact matriz. The analysis, calculus, CAD 2D and 3D and the entire assembly of the machine, were developt by my parnership and i in one year. It was an incredible experience. We got financing for the construction of a prototype which I am building.

I Suhail Ahmad have completed BE Mechanical in 2013, I have total experience in design is 4.5 years , Currently working in Symtronics Automation Pvt Ltd , I have good hands on 2D/3D Modeling, FEA & CF... Read more

I Suhail Ahmad have completed BE Mechanical in 2013, I have total experience in design is 4.5 years , Currently working in Symtronics Automation Pvt Ltd , I have good hands on 2D/3D Modeling, FEA & CFD , i have also good experience on IC Engine Design & Development.

mechanical engineering student currently working as an mechanical automation engineer a manufacture industries Read more

mechanical engineering student currently working as an mechanical automation engineer a manufacture industries

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Read more

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

This is Sariful Islam. I am studying in Mechanical Engineering at IUBAT. Throughout my academic career I have been praised by many faculties and peers because of my creativity and complex problem solv... Read more

This is Sariful Islam. I am studying in Mechanical Engineering at IUBAT. Throughout my academic career I have been praised by many faculties and peers because of my creativity and complex problem solving ability. I am very energetic, motivated and professional person. I am expert in 3D model design. I also have expertise on Graphics Design. I have learned AutoCAD 2D and 3D , Solid Works, CATIA, ANSYS Workbench, Adobe Photoshop and Adobe Illustrator through online. I have designed several sample product for my friend's university thesis project by those design tool. I also learned HVAC design form IEB. i can estimate load and calculate duct size. Hopefully i can fulfill your expectation. Do not feel shy to knock me. Hope you will fell comfortable by working with me. Hoping for a great Journey with you

Manikandan is a highly creative and multitalented 3D Designer with extensive experience in Mechanical component & system design with effective and innovative results. Read more

Manikandan is a highly creative and multitalented 3D Designer with extensive experience in Mechanical component & system design with effective and innovative results.

Young self motivated Mechanical Engineer, with attention to precision and accurate CAD modes and relevant data capturing. Enjoys a challenge, positive and respectful nature. Read more

Young self motivated Mechanical Engineer, with attention to precision and accurate CAD modes and relevant data capturing. Enjoys a challenge, positive and respectful nature.

Hi there, thanks for visiting my profile. I have more than 5 years of experience as a mechanical engineer. I have worked in both production processes in the factory and in design and project managemen... Read more

Hi there, thanks for visiting my profile. I have more than 5 years of experience as a mechanical engineer. I have worked in both production processes in the factory and in design and project management, so I understand the workflow of a product from idea to mass production. I'm confident that my solid skills, knowledge, and experience in Mechanical Design/Drafting/3D Modeling/ FEA / Simulation/CAD CAM CNC/Research can help you solve your engineering problems. If you are looking for an engineer who can commit to and ensure the quality of your outcome and deadline, please don't hesitate to let me know.

THE SERVICE OF COOPERATION IN MAKING THE PROJECTS OF MECHANICAL THERMO-ENERGY SYSTEMS AND INSTALLATIONS AS WELL AS MECHANICAL INSTALLATIONS / PROCESSES / EQUIPMENT AND CONSTRUCTION / MECHANISMS / ASSE... Read more

THE SERVICE OF COOPERATION IN MAKING THE PROJECTS OF MECHANICAL THERMO-ENERGY SYSTEMS AND INSTALLATIONS AS WELL AS MECHANICAL INSTALLATIONS / PROCESSES / EQUIPMENT AND CONSTRUCTION / MECHANISMS / ASSEMBLIES, ..... As an external designer / collaborator / constructor / consultant, we offer collaborative services for the development of technical and project documentation for conventional and industrial systems. I deliver technical and project documentation in the form of project assignment, conceptual / master / execution technical solution in the scope of detailed technical description, detailed technical calculation, detailed design drawings in the form of P & ID scheme diagrams, layout of equipment and installations, section, views, details, individual positions / assemblies / mechanisms / constructions / devices and a set of contract costs for the contracting with the specification of equipment and materials, specification of the necessary montage works with the overall assessment of the value of the investment, as well as projects of derived state for the realized projects and technical solutions. Form of delivered documentation in electronic form as pdf, xls and cad format. The method of cooperation according to the model of the online work as an external designer / collaborator / constructor / consultant of the designing house / office and (or) the investor and in the scope of complete technical design solutions or parts of projects as a part or external collaborative support for the design team and (or) the investor. LIST OF PROJECTED TECHNICAL SYSTEMS AND ELEMENTS: HEATING, COOLING, VENTILATION, ASPIRATION / DEDUSTING, COMPRESSED AIR, GAS (NATURAL / LPG), WATER CITY / SOFTENED / DEMINERALIZED / INDUSTRIAL, STEAM AND CONDENSATE, CANALIZATION, CONSOMABLE WARM WATER, OIL ECONOMY, TANKS FOR LPG, SOLAR, FIRE PROTECTION /SPRINKLER SYSTEMS, BOILER ROOM / POWER PLANT, HEAT CHANGE STATION, CLIMATE CHAMBER, CHILLERS, HEAT PUMPS, COMPRESSOR STATIONS, GAS STATIONS, SPRINKLER STATIONS, WARM WATER PIPELINE, HOT WATER PIPELINE, STEAM LINE, GAS PIPELINE, TECHNOLOGYES AND PROCESSES, DEVICES, STEEL CONSTRUCTIONS, MECHANISMS, ASSEMBLIES, ..... LIST OF PLANNED EQUIPMENT: ALFA LAVAL, ALGAS-SDI, AQUATHERM, ARI ARMATUREN, ARMACELL, AIR TORQUE, BOA GROUP, BOSSARD, BÜRKERT, CALEFFI, CENTROMETAL, CWG, DANFOSS, EBRO ARMATUREN, ELBI, ENDRESS + HAUSER, EUROGAMMA GROUP, FESTO, FLOWSERVE, GEMÜ, GENEBRE, GEORG FISCHER, GESTRA, GHH RAND, GOK, GRUNDFOS, HERZ, HONEYWELL, IKOM, IMI HEIMEIER, ITAP, ITRON, JACOB, KAESER KOMPRESSOREN, KLIMA OPREMA, KOVINA, LIM MONT, LIPOVICA, MAGRA, MESURA, MÜPRO, NEDERMAN, OLIMPIA SPLENDID, ORIOLIK, OVENTROP, PASTOR, PICHLER, PIPE LIFE, PIREKO, POLIX, PROKLIMA, REFLEX, REHAU, REGO, RESOL, RUCK VENTILATOREN, SCHIEDEL, SELTRON, SIEMENS, SPO, SYSTEMAIR, TECONOVA, THERMAL TREND, TROX TECHNIK, VAILLANT, VEAB HEAT TECH AB, VIESSMANN, VIVAX, WEISHAUPT, WIKA, ..... TECHNICAL CALCULATIONS: HEAT PUMPS - Dimensioning, selection and calculation of heat pumps, HEATING - Noise calculation according to VDI 2174, HEATING - chimney according to DIN EN 13384-1, HEATING - Sizing of heating generator, HEATING - selection and dimensioning of radiators according to DIN EN 442, HEATING - Floor heating according to DIN EN 1264, HEATING - calculation of annually required heating energy demand according to DIN EN 832, HEATING - operation and selection of the expansion system according to DIN EN 12828, HEATING - heating losses according to DIN EN 12831, HEATING - heating and cooling – hydraulics, COOLING - Calculation of the cooling load according to VDI 2078, GAS - Dimensioning and Calculation The pressure loss in pipelines, HOT WATER - Heating load for hot water according to DIN 4708 and 1988, SOLAR - Calculation of solar systems, VENTILATION - Calculation of ventilation systems, ..... REFERENCES: MECHANICAL ENGINEERING SHCOOL, FACULTY OF MECHANICAL ENGINEERING AND NAVAL ARCHICTETURE, ENERGETICS AND MECHANICAL INSTALLATIONS IN CIVIL ENGINEERING, METAL INDUSTRY, ASSEMBLY OF MECHANICAL / PROCESS EQUIPMENT AND INSTALLATIONS, FOOD INDUSTRY, CHEMICAL INDUSTRY, PHARMACEUTICAL INDUSTRY, ...

The team started in 1985, working on the design and drawing of ventilating, air conditioning and refrigerating systems. It was registered in 1993 as CIM. We are initially located in Venezuela and ha... Read more

The team started in 1985, working on the design and drawing of ventilating, air conditioning and refrigerating systems. It was registered in 1993 as CIM. We are initially located in Venezuela and have provided consulting mechanical engineering services to a wide range of clients throughout the country. Currently, we try to conduct our work from multiple locations, to different countries, carrying out many of our interactions virtually.

PRESENTLY WORKING WITH A MNC AS A DESIGN MANAGER. ALWAYS INTERESTED TO TO SOMETHING NEW. Read more

PRESENTLY WORKING WITH A MNC AS A DESIGN MANAGER. ALWAYS INTERESTED TO TO SOMETHING NEW.