Hire the best freelance Piping Diagrams expert designers for your company

Diploma in Mechanical Drafting and CAD Technology from Tennessee College of Applied of Sciences. Self-taught Revit LT user and modeler, with a professional background in Mechanical Design with Solid W... Read more

Diploma in Mechanical Drafting and CAD Technology from Tennessee College of Applied of Sciences. Self-taught Revit LT user and modeler, with a professional background in Mechanical Design with Solid Works. CSWA certified and certified in advanced sheet metal design.

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowle... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy... Read more

- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy Plus - Experienced with designing piping systems, cooling water systems, HVAC, compressed air systems, tanks, furnaces, copper cooling blocks for furnaces, off-gas treatment systems, hoods, leak detection systems

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

Having good Experience in different CAD software's like PTC Creo Solid works AutoCAD AutoDesk Inventory. Expertise in different streams like casting sheet metal Pro-piping Surface Modeling. Having exp... Read more

Having good Experience in different CAD software's like PTC Creo Solid works AutoCAD AutoDesk Inventory. Expertise in different streams like casting sheet metal Pro-piping Surface Modeling. Having experience on Automotive Agriculture Equipment's Home Appliance. able to take up different type of challenges in Product design.

Design engineer/supervisor/manager Read more

Design engineer/supervisor/manager

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management Read more

Multi-Disciplinary Draughtsman ( Structural, Mechanical, Electrical, Piping, Architectural) Diploma in ISO Standards and Project Management

I have been designing for about 10 years. I love to do it, and am always looking to do more. I am proficient in AutoCAD and Autodesk inventor. I am currently an engineering manager for a Pressure Vess... Read more

I have been designing for about 10 years. I love to do it, and am always looking to do more. I am proficient in AutoCAD and Autodesk inventor. I am currently an engineering manager for a Pressure Vessel Manufacturer, but always looking for side work to fund my projects.

Mechanical Engineer with 17 years of experience especially in oil&gas and energy projects both site and design. Certified with Process Plant Layout Design Lead Engineer . Completed the course Project... Read more

Mechanical Engineer with 17 years of experience especially in oil&gas and energy projects both site and design. Certified with Process Plant Layout Design Lead Engineer . Completed the course Project Management of Engineering Projects (Delft X university Amsterdam). Piping design engineer.

I believe in ambition and balance. Engineering methods helped me to adapt my creativity into a path bound to technical and managerial duties. With the time, i’ve started to combine my backgrounds with... Read more

I believe in ambition and balance. Engineering methods helped me to adapt my creativity into a path bound to technical and managerial duties. With the time, i’ve started to combine my backgrounds with opportunities and market needs, embracing new experiences and industries.

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools lik... Read more

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools like E3d, Sp3d, Pdms and Pds. Roles and Responsibilities:- Piping layout designing 3d Modeling of Equipment, Piping, etc., Preparation of Plotplan,Keyplan,Equipmentlayout,Piping GA’s Vendor drawings checking Interacts with other disciplines Inter-Discipline Documents Checking & Clearing Isometric checking Nozzle orientation Support callout based on stress output Attending Model review & comments providing to other disciplines MTO Activities Input preparations for civil works Tie-in/As built works in both Brownfield and Greenfield IFC iso issuing Preparation of Combined UG Plan drawings UG piping/Isometrics Preparation of piping GA drawings Manages and maintains the Project Documentation Model close out activities

Dear Sir, We Aatral Engineering Consultant (http://www.aatralengg.com/service) have vast experience in MEP and we have completed the number of projects in projects in Gulf, Europe and African... Read more

Dear Sir, We Aatral Engineering Consultant (http://www.aatralengg.com/service) have vast experience in MEP and we have completed the number of projects in projects in Gulf, Europe and African countries, So we request you to give this opportunity to serve. Regards, Steephanraj ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒ - Steepa T

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

I take pride in all my work by ensuring the client's needs and visions are met and correctly captured. I provide very quick turnarounds on all drawings without sacrificing the quality. My extreme atte... Read more

I take pride in all my work by ensuring the client's needs and visions are met and correctly captured. I provide very quick turnarounds on all drawings without sacrificing the quality. My extreme attention to detail and ability to efficiently use drafting software allows me to provide accurate and clean drawings to ally clients.

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

I'm alvin jasmin from the philippines, has over 7 years of working experience in autocad drafting and 3d modelling/rendering as well. Involve in a multi national engineering projects. Familiallrize in... Read more

I'm alvin jasmin from the philippines, has over 7 years of working experience in autocad drafting and 3d modelling/rendering as well. Involve in a multi national engineering projects. Familiallrize in architectural/civil, piping and mechanical drawings.

I started in the CAD world over 10 years ago as an entry level drafted in the waste water industry. I spent time doing fabrication design drawing kckahea for small treatment systems, but worked my way... Read more

I started in the CAD world over 10 years ago as an entry level drafted in the waste water industry. I spent time doing fabrication design drawing kckahea for small treatment systems, but worked my way up to 3D piping group manager. I’ve lead many piping projects that range from $800K to $290 million dollars. Although piping and mechanical design is my background, I am capable of much more.

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conduct... Read more

I hold a bachelor degree in mechanical engineering. I served as a mechanical engineer for a design company, with various tasks like update and drawing of P&ID's, ISO's preparation and drawing, conducting finite element analysis (FEA) using AUTODESK FUSION 360, drawing and preparing LAYOUT drawings. I'm currently working as a piping design engineer for a consultancy firm, responsible for producing P&ID's, ISO's, GA's and plot plan drawings. I contributed in projects for a reputable companies like ExxonMobil, ESSO, Chevron,.. I carried out my tasks using software programs like: AUTOCAD PLANT 3D, AUTODESK FUSION 360, AUTOCAD, DRAFTSIGHT, AVEVA PDMS,

13 Years of Experience in 2D Piping &Process Designing. Autocad, As Built work. Chemical, Petrochemical, Power Sector. Read more

13 Years of Experience in 2D Piping &Process Designing. Autocad, As Built work. Chemical, Petrochemical, Power Sector.