Hire the best freelance Stormwater Design Engineering expert designers for your company

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site... Read more

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site planning, site design, roadway design, stormwater management planning and design (gray infrastructure and LID/Green infrastructure), hydrology/hydraulics, entitlements and permitting, project scheduling, cost estimating, franchise utility coordination, and construction phase services. B.S. in Civil Engineering from California Polytechnic State University, San Luis Obispo, CA Project experience in the CA, NJ, and NY markets. Proficient in the following design software programs: AutoCAD Civil 3D as well as HydraFlow Hydrographs and Vehicle Tracking extension to the program, Flowmaster, StormCAD, and ArcGIS.

I am a Civil Engineer working as a Infrastructure Designer for 3 years + counting. I am also doing Masters in Water Resources and Irrigation Engineering and have a command over a variety of Infrastruc... Read more

I am a Civil Engineer working as a Infrastructure Designer for 3 years + counting. I am also doing Masters in Water Resources and Irrigation Engineering and have a command over a variety of Infrastructure Design Softwares.

i`m a structural engineer with 2 years of professional experince. i specialize in the design of reinforced concrete for both industrial and residential projects , and 2D drawing. i am expert in au... Read more

i`m a structural engineer with 2 years of professional experince. i specialize in the design of reinforced concrete for both industrial and residential projects , and 2D drawing. i am expert in autocad 2D , sap2000 and safe. my previous experince consulted on the analysis and safety checks of reinforced concrete residential building and 2D drawing. i am ready to apply my skills and experience to your projects and look forward to hearing from you.

With a dynamic career as a Civil Engineer and Drafter spanning over six years, I bring to the table a wealth of experience, a strong commitment to precision, and a passion for exceeding expectations.... Read more

With a dynamic career as a Civil Engineer and Drafter spanning over six years, I bring to the table a wealth of experience, a strong commitment to precision, and a passion for exceeding expectations. My journey started in 2016, and since then, I've worn multiple hats, from inspection and testing roles to drafting and designing for complex projects. My current role as a Project Engineer involves overseeing a team of design engineers on large-scale industrial site development projects. This diverse experience has shaped me into a versatile professional who is comfortable navigating the many facets of civil engineering. In terms of technical skills, my proficiency with AutoCAD and Civil 3D sets me apart. This mastery was honed through my time as a drafting professor, a role in which I developed a comprehensive curriculum and wrote over 800 pages of material. This experience not only deepened my own knowledge but also equipped me with the skills to communicate complex concepts effectively. Among my notable projects are Amazon distribution centers, Domino's stores, and public water and sewer mains spread across Oregon, Western Washington, and as far as Tennessee. Each project has sharpened my ability to conduct detailed stormwater and wastewater management solutions, site grading, road design, sewer lift stations, and many other tasks, all of which are completed with rigorous attention to detail and a commitment to delivering results on time and within budget. Educationally, I hold a bachelor's degree in civil engineering with a minor in applied physics from an ABET accredited institution. Graduating summa cum laude, I proved my dedication to my field and my commitment to achieving high standards. My strengths lie not only in my technical abilities but also in my strategic approach to project management and my meticulous attention to detail. I kick off projects with a comprehensive schedule, identify critical paths and target dates, maintain consistent communication with clients, and ensure all discussions are documented for future reference. I am proud to be a licensed Professional Engineer (PE) in Washington, and I am ready to secure licensure in other states according to the project's needs. My approach to work is characterized by a commitment to transforming clients' visions into reality, delivering aesthetic and sustainable designs within the agreed timeframe and budget. In my free time, I nurture my love for learning, dabbling in coding, indulging in my passion for physics and science, playing chess, and enjoying tennis. These interests add a unique dimension to my professional skillset, as I continually seek to learn, grow, and bring fresh perspectives to my work. In every project I undertake, I strive to embody the principles of excellence, integrity, and sustainable practices. Your vision is my mission, and I look forward to crafting engineering solutions that exceed your expectations.

I am a Civil Engineer, working in the construction and mechanical industry since 1998. I have worked on different projects and companies, from Residential and commercial building to complex infrastruc... Read more

I am a Civil Engineer, working in the construction and mechanical industry since 1998. I have worked on different projects and companies, from Residential and commercial building to complex infrastructure projects. In Pakistan I have worked mostly on residential building and villas, when Pakistan’s first Motorway project was launched I became a part of pioneering team. I worked there on M2 Lahore to Islamabad motorway project and was in-charge of Culverts and small underpasses which ran under the motorway to facilitate the locals, villagers and animals of the area to cross under the road. In 2007 I moved to United Arab Emirates, here I mostly worked on infrastructure projects based in Dubai and Abu Dhabi. My focus was utilities, like potable water, sewerage and sanitary water, storm water drainage and irrigation most of the time. But I also worked on electrical networks and fiber optic cables for telecoms and traffic. With the experience spanning more than 2 decades I have decided to now shift my attention to freelancing world. As the world is changing repeatedly so is the way to work. Freelancing is the most comfortable way to express my abilities and find new technologies and meet new people which I truly enjoy. I can work on Civil and Mechanical projects, detailed drawings for Tools and Assemblies, Floor plans, Front elevations, Architectural details and sections for buildings as well as Layouts, profiles and sketches for infrastructure work you name it. Elementary survey (on ground and trial trenches) details or complex works of layout and profiling an area for any utility or structure I am your expert to do it all. I like to take up challenges, freelancing will present my skills to the whole world. I also have good communication skills as I had worked with many multinational companies, consultants and clients with nationalities in Pakistan and abroad, from all around the world. Meeting dead lines, finishing work with accuracy and professionalism is my trademark. For comfort and peace of mind to my client I keep direct and constant connection, till the work ends.

Enthusiastic and proud civil engineer. Technical background includes, pump stations (water and wastewater), roads and pavement design, pipelines design, grading and drainage, transportation, and storm... Read more

Enthusiastic and proud civil engineer. Technical background includes, pump stations (water and wastewater), roads and pavement design, pipelines design, grading and drainage, transportation, and storm drainage systems. Registered professional engineer in Texas and Colorado. Previous experiences have included but are not limited to the following: -Plan and profile for water and wastewater pipelines -Influent pump station designs -Pipeline alignment studies -Paving plans, profiles, typical sections, and details -Retaining wall plans, profiles, sections and details -Review of bridge plans, details, and sections -Storm sewer plan and profiles -Detailed grading layouts for intersection and creeks -Utility relocation coordination for franchise/municipal utilities -Existing drainage system analysis -Survey planning, coordination and data analysis -Design schematics -Coordination with multiple firms and disciplines

We are a civil engineering company comprising of 2 experienced and professional civil engineers. We have over 40 years of combined experience in all aspects of civil engineering design and constructio... Read more

We are a civil engineering company comprising of 2 experienced and professional civil engineers. We have over 40 years of combined experience in all aspects of civil engineering design and construction, excluding structural engineering. We have experience working in the USA and various countries in the Middle East.

Specialist in the field of ( Drainage) I have more than ten years of experience in the field of Drainage( Hydrology and hydraulic ), and floodplain risk management and solutions I have perfect experi... Read more

Specialist in the field of ( Drainage) I have more than ten years of experience in the field of Drainage( Hydrology and hydraulic ), and floodplain risk management and solutions I have perfect experience in integration between drainage design software and GIS software, which gives the ability to reduce design process time up to 40% compared with " traditional design ways." I have been worked on different projects scales large and small-scale projects. Software 1.Hec-Ras 1D and 2D 2.Hec-Georas 3.StormCad 4.civil 3D 5.ArcGIS 6.SSA 7.Global Mapper 8.Sewer Cad

I am an experienced building services hydraulic engineer and drafter with over 20 years of hands on experience. Projects i have completed included high rise commercial and residential, hospitals, tra... Read more

I am an experienced building services hydraulic engineer and drafter with over 20 years of hands on experience. Projects i have completed included high rise commercial and residential, hospitals, train stations and transport projects. My skills include all aspects of plumbing design including fire hydrants and fure hose reel designs and documentation including drafting into Revit, Peer reviews, design verifications and calculations.

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disci... Read more

As an Australia based Civil Engineering Designer, I possess over a decade of professional experience in the civil engineering industry. Throughout my career, I have been engaged in diverse multi-disciplinary environments encompassing various domains, including water and sanitation, roads and stormwater, residential, commercial and industrial developments, as well as the construction industry. My proficiency in both local and interstate civil services and roads design has been honed through extensive involvement in an array of projects, which include but are not limited to, subdivisions design, geometric design, and bulk earthworks design. My expertise in engineering software programs spans a broad spectrum, encompassing 12d Model, Civil3D, AutoCAD, Caddie 18, Model/ Pipe/ Road Maker, and Autodesk extensions such as Infraworks and Vehicle Tracking.

AMD Engineering is a full-service small-sized business specializing in Stormwater Management design and Transportation planning and various other engineering design services throughout Maryland, Virgi... Read more

AMD Engineering is a full-service small-sized business specializing in Stormwater Management design and Transportation planning and various other engineering design services throughout Maryland, Virginia, and Washington DC. They have over 25 years of combined engineering and consulting experience.

I am a seasoned MEP Design Engineer with over 15 years of experience in delivering top-notch MEP (Mechanical, Electrical, and Plumbing) solutions for a wide array of projects including commercial, res... Read more

I am a seasoned MEP Design Engineer with over 15 years of experience in delivering top-notch MEP (Mechanical, Electrical, and Plumbing) solutions for a wide array of projects including commercial, residential, hospitals, hotels, and educational facilities. My expertise, combined with a dedicated team of professionals, ensures comprehensive and tailored MEP services to meet your project needs. My Expertise: ★ Mechanical Engineering: Efficient HVAC and fire protection systems. ★ Electrical Engineering: Innovative lighting and power systems. ★ Plumbing Engineering: Reliable water supply and drainage systems. Services Offered: Electrical: ★ Lighting Layout ★ Small Power Layout ★ Lightning Protection & Earthing Layout ★ IT Layout ★ Security, CCTV & Access Control System Layout ★ Fire Alarm & Emergency Lighting Layout ★ Public Address System Layout, ACS control system ★ Load Schedule & Single Line Diagram ★ One Line Diagrams ★ Solar System Design ★ Helioscope Simulation ★ PVSyst Simulation Mechanical: ★ Cooling and heating system designs per standards ★ Ducting design and sizing ★ Load calculations using HAP software ★ Ventilation and exhaust design ★ Equipment scheduling ★ Schematic design ★ HVAC Layout ★ Manual J ★ Manual D ★ Manual S ★ Ventilation Layout ★ Smoke Ventilation Layout ★ Fire Fighting Layout Plumbing: ★ Drainage and water supply layouts (hot and cold) ★ Vent and gas supply systems ★ Isometric/riser diagrams for plumbing ★ Pump calculations ★ Fixture scheduling ★ Stormwater calculations ★ Septic tank design Fire Suppression System: ★ Sprinkler design ★ Hydraulic calculations ★ Pump scheduling and capacity planning ★ Pipe sizing Why Choose Me? ★ 100% Satisfaction Guaranteed: Striving for perfection in every project. ★ Unlimited Revisions: Commitment to revisions until full satisfaction. ★ Precision and Accuracy: Detailed and precise designs. ★ Quick Turnaround: Deliverables within 24 to 48 hours without compromising quality. My Team: ★ 2 Mechanical, Plumbing, and Fire Engineers ★ 1 Structural Engineers ★ 2 Senior MEP Engineers ★ 1 Electrical Engineer ★ 4 Draftspersons ★ 2 Architects We provide expert MEP services for residential buildings, apartments, and villas, ensuring your project's success. Contact me today to discuss your requirements and bring your vision to life with professional, reliable MEP solutions. #draftsman #draughtsman #drafter #cad #autocad #draftsmen #draughtsmen #electrical #MEP #revit #PDMS #autocad #draftsman #drafting #cad #drafter #caddesign #Electrical #Instrument #Instrumentation #oilandgas #marineindustry #shipbuilding #remote #virtual #interim #remotedraftsman #virtualdraftsman #interimdraftsman #KB #oleg #helpme #Covid19 #draughtsman #draftsmen #draughtsmen #electricaldraftsman #electricaldrafter #lookingforjob #maritimeindustry #maritime #marine #activelylooking #marineengineering #freelance #gulf #Qatar #Doha #Oman #Dubai #AbuDhabi #UAE #SaudiaArab #KSA

Over sixteen years of progressive, multi-disciplined engineering experience in Civil Engineering and Geotechnical Engineering (Florida and Colorado) for both private and public entities. Services... Read more

Over sixteen years of progressive, multi-disciplined engineering experience in Civil Engineering and Geotechnical Engineering (Florida and Colorado) for both private and public entities. Services Provided include: • Civil Site Design • Subdivision Development • Commercial and Industrial Site Development • Park and Recreation Development • Institutional Development • Stormwater and Drainage Design • Roadway Design • Water Distribution and Wastewater Collection Systems • Engineering Take-offs and Opinions of Probable Construction Cost • Design with Geosynthetics

I am an accomplished Civil Drafter and Designer with over 15 years of experience in the civil engineering industry. My background is rooted in a solid technical and design foundation, and I have honed... Read more

I am an accomplished Civil Drafter and Designer with over 15 years of experience in the civil engineering industry. My background is rooted in a solid technical and design foundation, and I have honed my skills in the planning, design, and execution of diverse civil engineering projects. My expertise spans a wide spectrum, with particular strengths in road design, urban development, earthworks, stormwater drainage, and water-sensitive urban design. I have been fortunate to contribute my knowledge and skills to a multitude of projects, including urban land divisions, local Council and state government road initiatives, shopping centers, car parks, warehouses, hotels, schools, service stations, sporting fields, aged care facilities, and many more. I am passionate about leveraging my wealth of experience to drive innovation and excellence in the civil engineering sector, and I am always eager to collaborate on challenging and transformative projects. Let's connect and explore the possibilities of working together to shape a sustainable and resilient future through engineering excellence.

I am an experienced civil engineer in contracting with mega size companies in the gulf region. I am experienced in project management and able to do contracting works from A to Z in structural, fit-ou... Read more

I am an experienced civil engineer in contracting with mega size companies in the gulf region. I am experienced in project management and able to do contracting works from A to Z in structural, fit-out and infra works. On the other hand, i am also a researcher and have deep knowledge in hydro modeling. Services i can provide: -Drainage, grading and site planning -Google earth engine -Civil 3d - Hydrology and hydraulics calculations -GIS & hydro modeling (HEC-RAS, HEC-HMS, Flood routing) - Erosion control plans - Earthwork quantity calculations -Road design - Quantity takeoff - Project time scheduling - Qualitative research - Revit modeling - 3d visualization - research writing -Stormwater, sewer, and water management plan -Commercial/Residential lot subdivision -Flood modeling -LIDAR Data classifications

24 years of Civil Engineering Experience working for consultants and local government. Have been using AutoCAD products for design since I began my career and have excellent skill in the most current... Read more

24 years of Civil Engineering Experience working for consultants and local government. Have been using AutoCAD products for design since I began my career and have excellent skill in the most current versions. I have design, created plans and specifications for several new and reconstruct projects that include stormwater, watermain, sanitary sewer, Local & highway roadways, and grading plans.

- SWPPP Stormwater Pollution Prevention Plan Developer -Provides site information for civil plans or SWPPP development for engineering, geological, and hydrology firm -Independently develops SWPPPs fo... Read more

- SWPPP Stormwater Pollution Prevention Plan Developer -Provides site information for civil plans or SWPPP development for engineering, geological, and hydrology firm -Independently develops SWPPPs for construction sites -NPDES and State Stormwater permitting -Researches and provides permitting and regulatory information to clients

I am a civil designer in land development field, with experience in Layout, Grading, Sewer, water, Stormwater, septic and sewer treatment design. I am currently working for a US land development firm,... Read more

I am a civil designer in land development field, with experience in Layout, Grading, Sewer, water, Stormwater, septic and sewer treatment design. I am currently working for a US land development firm, Tennessee. I have great knowledge in Civil 3D and AutoCAD software.

Miss Botha, Founder of JBC Services has worked in a range of multi-disciplinary environments including water and sanitation, roads and stormwater, commercial and industrial developments as well as the... Read more

Miss Botha, Founder of JBC Services has worked in a range of multi-disciplinary environments including water and sanitation, roads and stormwater, commercial and industrial developments as well as the construction industry. She has gained extensive experience in the design of civil services and roads, project management, contract management, construction supervision and construction management. She is proficient in a range of engineering software programs including AutoCAD, AutoCAD Civil 3D and SSA (Storm and Sewer Analysis) as well as Caddie 18 and Model/Pipe/Road Maker. Miss Botha completed her National Diploma in 2009 and is currently busy with her BTech – Urban Engineering at UNISA which will be completed at the end of 2015. Miss Botha is also registered with CESA as a candidate Technician and plans to register professionally as an Engineering Technologist in 2019, as per CESA requirements. Certificates available on request. The Engineering Industry has a tendency to go from extremely busy with tight deadlines and impossible targets to dead quiet. Realizing that small to medium sized consulting engineers, architects and developers may want to utilize a qualified experienced technician for a contract period rather than to appoint someone full time, JBC Services was founded to assist in these demanding times at competitive rates compared to registered professionals.

I am a 3rd Mechanical Engineering student from NIT Jalandhar. I have a 3 year experience in CAD Modelling on Solid-works and CATIA, can do Drafting and 2D Sketching on AutoCAD, have 1 year of experien... Read more

I am a 3rd Mechanical Engineering student from NIT Jalandhar. I have a 3 year experience in CAD Modelling on Solid-works and CATIA, can do Drafting and 2D Sketching on AutoCAD, have 1 year of experience in CAE and CFD.

hello, I am a freelancer architect and engineer from india and I happy to work for your projects. Read more

hello, I am a freelancer architect and engineer from india and I happy to work for your projects.