Remote
Work location
Autocad Design & FEA for Transportable Office Ended
About the job
I'm looking for an expert in AutoCAD to help develop a model and perform Finite Element Analysis (FEA) for a transportable building.
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweights.
*Lifting Point Assessment
* Design to satisfy C2 W50 61m/sec 220km/h Wind Rated for Queensland Australia
Ideal candidates will have extensive experience in architectural design, AutoCAD modelling, and FEA of similar structures. Effective communication skills are crucial, as the project may require adjustments and modifications based on the FEA results. Proficiency in evaluating structural loads, material stress levels, and structural soundness is of paramount importance. Knowledge and experience in design of transportable buildings favourable. Experience with EPS Panel - SEP - Sandwich Panel Structures required.
DWG files will be provided to successful bidder in confidence.
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweights.
*Lifting Point Assessment
* Design to satisfy C2 W50 61m/sec 220km/h Wind Rated for Queensland Australia
Ideal candidates will have extensive experience in architectural design, AutoCAD modelling, and FEA of similar structures. Effective communication skills are crucial, as the project may require adjustments and modifications based on the FEA results. Proficiency in evaluating structural loads, material stress levels, and structural soundness is of paramount importance. Knowledge and experience in design of transportable buildings favourable. Experience with EPS Panel - SEP - Sandwich Panel Structures required.
DWG files will be provided to successful bidder in confidence.
I'm looking for an expert in AutoCAD to help develop a model and perform Finite Element Analysis (FEA) for a transportable building.
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweights.
*Lifting Point Assessment
* Design to satisfy C2 W50 61m/sec 220km/h Wind Rated for Queensland Australia
Ideal candidates will have extensive experience in architectural design, AutoCAD modelling, and FEA of similar structures. Effective communication skills are crucial, as the project may require adjustments and modifications based on the FEA results. Proficiency in evaluating structural loads, material stress levels, and structural soundness is of paramount importance. Knowledge and experience in design of transportable buildings favourable. Experience with EPS Panel - SEP - Sandwich Panel Structures required.
DWG files will be provided to successful bidder in confidence.
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweights.
*Lifting Point Assessment
* Design to satisfy C2 W50 61m/sec 220km/h Wind Rated for Queensland Australia
Ideal candidates will have extensive experience in architectural design, AutoCAD modelling, and FEA of similar structures. Effective communication skills are crucial, as the project may require adjustments and modifications based on the FEA results. Proficiency in evaluating structural loads, material stress levels, and structural soundness is of paramount importance. Knowledge and experience in design of transportable buildings favourable. Experience with EPS Panel - SEP - Sandwich Panel Structures required.
DWG files will be provided to successful bidder in confidence.
I'm looking for an expert in AutoCAD to help develop a model and perform Finite Element Analysis (FEA) for a transportable building.
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweight... read more
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweight... read more
I'm looking for an expert in AutoCAD to help develop a model and perform Finite Element Analysis (FEA) for a transportable building.
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweights.
*Lifting Point Assessment
* Design to satisfy C2 W50 61m/sec 220km/h Wind Rated for Queensland Australia
Ideal candidates will have extensive experience in architectural design, AutoCAD modelling, and FEA of similar structures. Effective communication skills are crucial, as the project may require adjustments and modifications based on the FEA results. Proficiency in evaluating structural loads, material stress levels, and structural soundness is of paramount importance. Knowledge and experience in design of transportable buildings favourable. Experience with EPS Panel - SEP - Sandwich Panel Structures required.
DWG files will be provided to successful bidder in confidence. read less
* The Building: A 9m x 3m structure constructed from a cold-formed floor system, walls and roof in sandwich panel. The purpose of this building is to serve as a temporary site office.
* The Subframe: Fabricated UB Beam with attached precast concrete counterweights.
*Lifting Point Assessment
* Design to satisfy C2 W50 61m/sec 220km/h Wind Rated for Queensland Australia
Ideal candidates will have extensive experience in architectural design, AutoCAD modelling, and FEA of similar structures. Effective communication skills are crucial, as the project may require adjustments and modifications based on the FEA results. Proficiency in evaluating structural loads, material stress levels, and structural soundness is of paramount importance. Knowledge and experience in design of transportable buildings favourable. Experience with EPS Panel - SEP - Sandwich Panel Structures required.
DWG files will be provided to successful bidder in confidence. read less
Things to know
Intermediate
Skill Level
$400
Fixed-rate (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D & 3D Design
3D Building Design
AutoCAD Structural Detailing
Autodesk Inventor
FEA Finite Element Analysis
+2 more
Job categories
FEA Finite Element Analysis
AutoCAD Drafting & Design
3D Modeling
Structural Engineering
Structural Steel Detailing
+2 more
Languages
English
Professional working proficiency
About the client
Payment ready
Australia (09:30 am)
Posted
Active
Job activity
17 Applicants
5 interviews in progress
4 unanswered invites
More open jobs from this client (6)
DESIGN FORKLIFT ROOF PANEL INSTALLATION FRAME
Remote - Posted
We require a Forklift Attachment for a 2.5T Forklift to handle 150mm EPS Roof Panels onto top of 3m Buildings during construction. The attached sketches depict what we require...
Mechanical Engineering
Structural Engineering
FEA Finite Element Analysis
View job
CABLE TRUCK TRAY MODIFICATIONS - DESIGN & DETAIL TEAM
Remote - Posted
We have a Cable Truck requiring modifications. Need to turnaround a number of Modification Drawings, Shop Detail, BOM and MTOs in next 7 Days. We seek (1) Agency or Multiple...
2D to 3D Modeling
Design Engineering Services
2D CAD Drafting Services
View job
PDM CONTRACTOR VILLAGE GA DWGs
Remote - Posted
As per attached scope.
- Site Plan
- Floorplans
- Elevations
2x Reviews.
Natives, PDF, DWG files.
Architectural Drawing Services
View job
AUSTRALIAN STANDARDS ARCHITECT - NEW TEMPORARY BUILDINGS
Remote - Posted
Scope of Work
The Architect shall provide architectural and engineering services for the design and certification of transportable buildings constructed using fabricated st...
Architectural Drafting Services
Structural Engineering
Architectural BIM Services
3D Floor Plan Design
3D Floor Plan Rendering
View job
DRAWING MANAGEMENT & WORKFLOW SET-UP FOR NEW COMPANY
Remote - Posted
We are a Construction Company, entering the Transportable Building Market. Our Drawing and Doc Control is adhoc ATM and we seek assistance to establish a Design Management pro...
Design & Drafting
Concept Design
Web Developers Staffing Agency
As-Built Drawings
Manufacturing Drawings
View job
PRE-CAST TRANSPORTABLE BALLAST PANELS
Remote - Posted
Design Pre-Cast Ballast Panel for use in Transportable Buildings. The Panel size must be to sample attached. Require Reo / Reinforcing Detail, BOM and Weights. Design must be...
Civil Engineering
Structural Design Services
AutoCAD Drafting & Design
View job
Similar jobs
Engine Redesign and scaled down to 1/3 scale
United Kingdom - Posted
I'm seeking a UK-based CAD specialist with solid expertise in automotive engineering and engine mechanics. The project involves updating an existing V12 engine design with CAD...
Mechanical Engineering
Mechanical Design Services
3D Printing Design
3D Modeling
View job
Creo 9 3D design
Remote - Posted
Make a 3d Design from the drawing and use the measurements on the drawings. There is also a example
3D Modeling
View job
Footwear CAD Designer for Sole with Interchangeable Strap System + Technical Drawings & Prototyping
Remote - Posted
I am looking for an experienced footwear CAD designer or product designer to help me develop a unique sandal/slipper concept featuring:
• One universal sole design
• Multi...
3D Modeling
2D CAD Drafting Services
CAD Drafting Services
Prototype Design Services
View job
3D CAD Model for Rubber Outsole Mold (Footwear – Work Boot Project)
Remote - Posted
Summary
We’re developing a next-generation rubber outsole for a minimalist work boot and require a skilled CAD professional to convert our 2D tech pack into a fully mold-read...
3D Modeling
3D Design Services
Mechanical CAD Design
3D Product Modeling
3D Product Rendering and Design
View job
3D MODELLING OF NOVEL CAR SEAT SAFETY BELT SYSTEM
Remote - Posted
please see attachment re Job description outlining job description
3D Modeling
3D Product Modeling
View job
CAD Designer for Modern Infill Residential Project in California (8-10 Units)
Remote - Posted
We're seeking a talented and efficient CAD designer to assist with an 8–10 unit residential infill project located in the heart of Sacramento. Our developments are modern, wel...
AutoCAD Drafting & Design
New Residential Design
Architectural Drafting Services
2D CAD Drafting Services
2D CAD Design Services
View job
