Remote
Work location
P&ID work required Ended
About the job
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datasheets
Equipment install location with full descriptions.
P&ID Review,
HAZOP participation
Equipment List & Design,
Design of the Fluidized Bed Reactor,
equipment integration in the module,
Fluids list(utilities)
Line size definition and list,
Drops and losses calculation,
Approval / Deviation List of conformity of norms & specification (SES) holistically
ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
- S3D & 3D modulization of the modular package,
- Detail engineering of the equipment,
- Structure design and calculation,
- Piping support design and calculation,
- Interface list en detail with other packages,
- Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
Functional analysis
Instrumentation datasheet and Input/Output list
Automation architecture
Design of power panel
Design of Automation Panel
Design of VFD with speed calculation that meet feed rates.
Power balance & distribution architecture
Panel and Junction Box integrat... read more
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datasheets
Equipment install location with full descriptions.
P&ID Review,
HAZOP participation
Equipment List & Design,
Design of the Fluidized Bed Reactor,
equipment integration in the module,
Fluids list(utilities)
Line size definition and list,
Drops and losses calculation,
Approval / Deviation List of conformity of norms & specification (SES) holistically
ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
- S3D & 3D modulization of the modular package,
- Detail engineering of the equipment,
- Structure design and calculation,
- Piping support design and calculation,
- Interface list en detail with other packages,
- Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
Functional analysis
Instrumentation datasheet and Input/Output list
Automation architecture
Design of power panel
Design of Automation Panel
Design of VFD with speed calculation that meet feed rates.
Power balance & distribution architecture
Panel and Junction Box integrat... read more
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datasheets
Equipment install location with full descriptions.
P&ID Review,
HAZOP participation
Equipment List & Design,
Design of the Fluidized Bed Reactor,
equipment integration in the module,
Fluids list(utilities)
Line size definition and list,
Drops and losses calculation,
Approval / Deviation List of conformity of norms & specification (SES) holistically
ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
- S3D & 3D modulization of the modular package,
- Detail engineering of the equipment,
- Structure design and calculation,
- Piping support design and calculation,
- Interface list en detail with other packages,
- Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
Functional analysis
Instrumentation datasheet and Input/Output list
Automation architecture
Design of power panel
Design of Automation Panel
Design of VFD with speed calculation that meet feed rates.
Power balance & distribution architecture
Panel and Junction Box integration
Cable selection table & calculation
SIL calculation if applicable
Programming dev.
Safety & Interlock table
Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must be used
Smart 3D -2016 Hotfix81
Smart Sketch-2016
MS SQL Server- 2014 Standard edition
Microsoft Office- 2013SP1 32 read less
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datasheets
Equipment install location with full descriptions.
P&ID Review,
HAZOP participation
Equipment List & Design,
Design of the Fluidized Bed Reactor,
equipment integration in the module,
Fluids list(utilities)
Line size definition and list,
Drops and losses calculation,
Approval / Deviation List of conformity of norms & specification (SES) holistically
ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
- S3D & 3D modulization of the modular package,
- Detail engineering of the equipment,
- Structure design and calculation,
- Piping support design and calculation,
- Interface list en detail with other packages,
- Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
Functional analysis
Instrumentation datasheet and Input/Output list
Automation architecture
Design of power panel
Design of Automation Panel
Design of VFD with speed calculation that meet feed rates.
Power balance & distribution architecture
Panel and Junction Box integration
Cable selection table & calculation
SIL calculation if applicable
Programming dev.
Safety & Interlock table
Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must be used
Smart 3D -2016 Hotfix81
Smart Sketch-2016
MS SQL Server- 2014 Standard edition
Microsoft Office- 2013SP1 32 read less
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datash... read more
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datash... read more
We would like to develop P&ID process drawing based on the feed and seed information that we will provide; P&ID shall cover the following task in the field of petrochemical technology.
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datasheets
Equipment install location with full descriptions.
P&ID Review,
HAZOP participation
Equipment List & Design,
Design of the Fluidized Bed Reactor,
equipment integration in the module,
Fluids list(utilities)
Line size definition and list,
Drops and losses calculation,
Approval / Deviation List of conformity of norms & specification (SES) holistically
ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
- S3D & 3D modulization of the modular package,
- Detail engineering of the equipment,
- Structure design and calculation,
- Piping support design and calculation,
- Interface list en detail with other packages,
- Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
Functional analysis
Instrumentation datasheet and Input/Output list
Automation architecture
Design of power panel
Design of Automation Panel
Design of VFD with speed calculation that meet feed rates.
Power balance & distribution architecture
Panel and Junction Box integration
Cable selection table & calculation
SIL calculation if applicable
Programming dev.
Safety & Interlock table
Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must be used
Smart 3D -2016 Hotfix81
Smart Sketch-2016
MS SQL Server- 2014 Standard edition
Microsoft Office- 2013SP1 32 read less
1. Process,
2. Mechanical, Piping & Structure,
3. Electricity, Instrumentation, Automation & Control
Process shall cover the following tasks:
Process Description,
Equipment selection
Equipment datasheets
Equipment install location with full descriptions.
P&ID Review,
HAZOP participation
Equipment List & Design,
Design of the Fluidized Bed Reactor,
equipment integration in the module,
Fluids list(utilities)
Line size definition and list,
Drops and losses calculation,
Approval / Deviation List of conformity of norms & specification (SES) holistically
ITP for equipment and process units
Mechanical, Piping & Structure shall cover the following tasks:
- S3D & 3D modulization of the modular package,
- Detail engineering of the equipment,
- Structure design and calculation,
- Piping support design and calculation,
- Interface list en detail with other packages,
- Class & Standard for piping (SES)
Electricity, Instrumentation, Automation & Control shall cover the following tasks:
Functional analysis
Instrumentation datasheet and Input/Output list
Automation architecture
Design of power panel
Design of Automation Panel
Design of VFD with speed calculation that meet feed rates.
Power balance & distribution architecture
Panel and Junction Box integration
Cable selection table & calculation
SIL calculation if applicable
Programming dev.
Safety & Interlock table
Design Integrated control system which shall be configure with main control room.
Software Name & Software Versions must be used
Smart 3D -2016 Hotfix81
Smart Sketch-2016
MS SQL Server- 2014 Standard edition
Microsoft Office- 2013SP1 32 read less
Things to know
Intermediate
Skill Level
Open budget
Hourly
Full-time
Job type
3-6 months
Job duration
Areas of expertise
2D Design Drawings
Job categories
Electrical Schematic Drawing Services
Mechanical Drawing Services
Oil & Gas
About the client
Payment ready
Colombia (06:31 pm)
Posted
Active
Job activity
13 Applicants
1 interviews in progress
More open jobs from this client (6)
Steel disk modification
Remote - Posted
Require a modification for a manufacturing process of a steel disk to incorporate the plastic internal part into the existing square groove. Its basically to hold a plate spri...
Industrial Design Services
CAD Drafting Services
Mechanical Design Services
Machine Design
Mechanical Engineering
View job
Steel disk modification
Remote - Posted
Require a modification for a manufacturing process of a steel disk to incorporate the plastic internal part into the existing square groove. Its basically to hold a plate spri...
Industrial Design Services
CAD Drafting Services
Mechanical Design Services
Machine Design
Mechanical Engineering
View job
Compressor valve opening and closing calculations and simulation
Remote - Posted
Hello, here is the scope:
This project aims to develop an Excel model for a new compressor design to simulate valve dynamics, specifically focusing on visualizing opening and...
Mechanical Design Services
Mechanical Engineering
Engineering Design
CAD Drawing Services
View job
CFD analysis for a compressor valve
Remote - Posted
Looking for help in putting together the enclosed information on a valve design completed to simulate variuos stress on spring plates etc.
Computational Fluid Dynamics
View job
Modify/improve existing compressor valve design
Remote - Posted
I have designed and tested several compressor valves. After extensive testing I want to modify/improve the design. I have all the STP files so just looking for someone to help...
Assembly Drawing Services
View job
P&ID work required
Remote - Posted
I require support for the following:
PFD
P&ID
Calculation of needed speed of metering disc based on catalyst flow requirement.
All needed instrumentation with datasheets n...
Oil & Gas
View job
Similar jobs
Mechanical Draftsman
Raipur, India - Posted
DUTIES :
• Develop detailed 2D and 3D designs and drawings using SolidWorks, AutoDesk
Inventor DraftSight and AutoCAD.
• Collaborate with the sales team to create concept d...
Design & Drafting
General CAD Drafting
Drafting and Design Services
Mechanical Drawing Services
View job
Low Voltage (LV) wiring system for Electric Vehicle
Remote - Posted
1. Project Overview
We are developing an electric bus and are looking for a cost-efficient engineering partner to support the Low Voltage (LV) wiring system.
This RFQ target...
Electrical Schematic Drawing Services
Electrical Engineering
View job
Designing Dismantling Joint tructure with dimensions
Remote - Posted
i want to fabricate few sizes of dismantling joints. I have a drawing and i want a new drawing with few changes with detail drawing of individual parts. Also want to check if...
Mechanical CAD Design
Mechanical Drawing Services
Design Engineering Services
Mechanical Design Services
View job
Need someone to make a assembly drawing
Remote - Posted
I had to design a screw press for my homework. I done the calculations and dimensions but I need someone to make a engineering drawing of it.
Assembly Drawing Services
Mechanical Drawing Services
View job
Needed a mechanical structure design,
Remote - Posted
Needed a weight calculation report with complete design.
Mechanical Drafting
Mechanical Design Services
Mechanical CAD Design
Mechanical Engineering
Mechanical Drawing Services
View job
Senior AutoCAD Desinger (Conveyor System)
Remote - Posted
Job Description:
We are looking for a skilled Technical Head AutoCAD Designer with hands-on technical experience in
conveyor systems. The candidate will be responsible for...
AutoCAD Design Services
Mechanical Drawing Services
Design for Manufacturing and Assembly
Machine Drawing Services
View job
