Hire Plumbing Design Designers in Bangladesh

Hello! As in current global scenario, it is my ambition to focus on providing clients all over the world high-quality, timely, and cost effective engineering services. I have extensive knowledge and e... Read more

Hello! As in current global scenario, it is my ambition to focus on providing clients all over the world high-quality, timely, and cost effective engineering services. I have extensive knowledge and experience in the design of HVAC Systems, MEP Systems, AutoCAD, Revit etc. Also, I am an expert in HVAC Design, AutoCAD drafting, HVAC shop drawing, As-built drawing and MEP detail drawing. I acquired all of my experiences from a job I served for six years. I'll complete the task in accordance with your acceptance criteria.

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential bu... Read more

I am an experienced MEP Design Engineer, I can use AutoCAD and Revit for HVAC/ electrical /plumbing /fuel system /fire protection (sprinklers) drawings. I have designed upto 10-storeyed residential buildings, C-Store, Fuel System, frames, plumbing -piping, fixtures, etc. I can work on plumbing and Fire protection drawings and MEP coordination. Aware of Plumbing design codes like IPC UPC, have used NFPA. I can do COMcheck, HVAC load calculations, plumbing pipe sizing, grease interceptor calculations, and permit plans.

Starting from the precise measurement of your land to the complete design of your dream home or commercial establishment. Our services include, a) Both online and offline sections anywhere in Banglade... Read more

Starting from the precise measurement of your land to the complete design of your dream home or commercial establishment. Our services include, a) Both online and offline sections anywhere in Bangladesh: - Soil test, Architectural, Structural, Electrical, Sanitary and Plumbing Design, Interior and Exterior Design, Estimating and Costing Services, 3D Design and Animation Services, Supervision and Monitoring Consultancy Services, Digital Topographic and Contour Survey, Satellite Mouza Map and Layout Preparation, Land Demarcation, Subdivision and Distribution Services, Plot Layout and Planning of Housing Projects, Design, Layout and Supervision Services of Piles, Roads, Bridges or any Hydraulic Structures. b) Services that you will get online only from anywhere in the world are:- Architectural, Structural, Electrical, Sanitary and Plumbing Design, Interior and Exterior Design, Estimating and Costing Services, 3D Design and Animation Services, Design of Pile, Road, Bridge or any Hydraulic Structure. We work as a team, so no matter how big the project, we can deliver very quickly. We complete the design by calculating the load of any structure using state-of-the-art structural design software. Our commitment, Perfection, trust and quality assurance in every work. Trust in construction, stability in decisions. We create the reality of your dreams through design.

I am 20 year experience AutoCAD Designer & Design Assistant Designer . I am Expert in AutoCAD Release 2007,2014 for 2D Design, Architectural Presentation Drawings, Approval Drawings, Construction Draw... Read more

I am 20 year experience AutoCAD Designer & Design Assistant Designer . I am Expert in AutoCAD Release 2007,2014 for 2D Design, Architectural Presentation Drawings, Approval Drawings, Construction Drawings, Details Working Drawings, Shop Drawings, Interior Drawings, Landscaping Drawings & Structural Construction Drawings, MEP (Mechanical, Electrical, Plumbing) Drawings for Residential Building, Commercial Tall Building, Factory, Educational Institute, Hospital. I also have been working in Consulting Firm ,Construction Firm,& Real State Companies.

Creative and able to provide solutions. My goal is offer a full satisfaction. Expertise in: - Mechanical Design - Pipe Stress Calculations - Finite Elements Calculations - Product Design -... Read more

Creative and able to provide solutions. My goal is offer a full satisfaction. Expertise in: - Mechanical Design - Pipe Stress Calculations - Finite Elements Calculations - Product Design - Industrial Design. - HVAC. - Plumbing Design. Software used: - Solidworks - AutoCAD. -CATIA -ANSYS

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

I have a Bachelor of Electrical & Electronic Engineering from Ahsanullah University of Science & Technology, Bangladesh and am a Member of The Institution of Engineers, Bangladesh (MIEB-30392), E-memb... Read more

I have a Bachelor of Electrical & Electronic Engineering from Ahsanullah University of Science & Technology, Bangladesh and am a Member of The Institution of Engineers, Bangladesh (MIEB-30392), E-member of Institute of Electrical and Electronics Engineers (IEEE-92351404) & American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE- 8206777) And Associate Member of Bangladesh Computer Society (AM-08785). I have been leading Engineer since 2008 to till date for several projects (apartment, residential building, commercial building, resort & hotels,) which I Designed (Interior, Exterior, and electromechanical), Checked, and Modified, Rebuild by Auto CAD, Solid Work etc and execute them. I have well-built background in planning and supervising projects at the same time within given deadlines, skill in administering personnel, reviewing and analyzing special reports; summarizing information; identifying trends, preparing & maintaining budgets, Preparing Project financial management statements, Preparing, Checking & Modifying Tender Documents with the Public Procurement Act 2008 & Procurement Guidelines of the International Bank for Reconstruction and Development/ THE WORLD BANK. I also have an established track record of leading integration of systems including software, hardware, mechanical and electrical fields. I have excellent command over Microsoft Office PowerPoint, Adobe Photoshop, Adobe Illustrator, and other related applications. Now I am working as an IT & Database Specialist in Higher Education Quality Enhancement Project (HEQEP), a project (Development of E-Teaching-Learning-Facilities for Under graduate & Master’s Program in Mechanical Engineering Department at RUET, Rajshahi.) of University Grants Commission of Bangladesh, Ministry of Education, Bangladesh, with the assistance of the World Bank.