Hire Local CAD Designers near Dundee, Scotland

I graduated with a bachelor’s degree in architecture from the University of Stockholm, I worked with a couple of big firms both locally and abroad and then started my own architecture firm doing addi... Read more

I graduated with a bachelor’s degree in architecture from the University of Stockholm, I worked with a couple of big firms both locally and abroad and then started my own architecture firm doing additions and remodeling in Stockholm and Goteborg as well as other neighboring cities. I did several projects, including the design of the Brockway Memorial Library, and always helped friends visualize the potential of homes before buying them. Most importantly, and what makes my Design unique from other? I listen to my clients and design what they want - not what I want. I can help you realize your vision and design a home that meets your needs… and is an extension of your lifestyle. My focus is on designing spaces that reflect my client’s needs and desires. I believe design should be a combination of the client’s lifestyle, needs, tastes, and budget. In remodeling, I take the existing style of the home into consideration - from the traffic flow and sight-lines to the structure and architectural design. The same is true for a custom home and the site that it sits on. I can work with any style of home, from traditional to contemporary. Our collaboration will result in a set of plans for architectural design of your new space or home. - As a home buyer, when working with me, you will gain from having free architectural consulting at your fingertips. - As a real estate buyers, with other design consulting aspects like materials and color selection as well as furniture arrangement. My enthusiasm is endless when it comes to design. - As a home seller, the advantages are endless. I will ask that you architectural pen and ink sketchuire floor plans of your properties (most cities will have floor plans and are easy to order); I will have those floor plans ready to show any prospective buyers. I will also help you identify any weaknesses in the current design of your property and will accentuate all the positive features. Having a passion for architecture and for helping people visualize the potential of a property is what makes my job so much fun. Our customers will tell you how I light up when I see a good space (they will also tell you what my reaction is when I visit “butchered homes”), how I will go out of my way to make their dream a reality within their financial parameters.

Hello! I'm a mechanical engineering student in the UK who enjoys doing different problem solving and designing tasks. Want something done? Hit me up! I also enjoy doing some small software and game de... Read more

Hello! I'm a mechanical engineering student in the UK who enjoys doing different problem solving and designing tasks. Want something done? Hit me up! I also enjoy doing some small software and game design related work. My main interests are computing and technology, physics (and science in general), writing and, of course, CAD.

Employed in engineering for over 40 years. I now operate as a sole trader with my extensive CAD/CAM experience, using fully licensed and supported Solidworks, for 2D detailing, Rendering, 3D modelling... Read more

Employed in engineering for over 40 years. I now operate as a sole trader with my extensive CAD/CAM experience, using fully licensed and supported Solidworks, for 2D detailing, Rendering, 3D modelling, and manufacturing file output including 2D drawings to BS8888. Rapid prototyping, Machine shop, Injection molding, Casting, Sheet metal, and Optical experience. Link to examples. https://www.youtube.com/watch?v=gm2rovAXAdU http://postprogram4cad.com/portfolio/the-list/ My client's websites, selling my designs. Fender Flares https://claddyllc.com/ Droneball cage https://imazetech.com/tech/ Holiday Inn Lobby Sign https://www.higearinnovations.com/hiex-portfolio Casing for label verification system https://cdn2.hubspot.net/hubfs/3780277/Website%20Assets/pdf/CheckMate-QA.pdf

Our mission is to provide best architectural and real estate marketing solutions to our clients considering their needs and the market demands. YAWE DESIGN offers: -Computer generated 3D modelling... Read more

Our mission is to provide best architectural and real estate marketing solutions to our clients considering their needs and the market demands. YAWE DESIGN offers: -Computer generated 3D modelling -Computer generated photorealistic images (panoramic&VR) -Computer generated photorealistic walkthrough videos and animations -Planning, conception and design -Presentations, logo design, branding and brochure design -Project consultancy YAWE DESIGN has a portfolio of satisfied clients and we can provide full services from 2D sketch to market presentations.

I'm a recent Product Design Engineering masters graduate so have extensive training in product design, CAD modelling, manufacturing and mechatronic design. I'm happy to assist with general product des... Read more

I'm a recent Product Design Engineering masters graduate so have extensive training in product design, CAD modelling, manufacturing and mechatronic design. I'm happy to assist with general product design and manufacturing tasks, and have particular experience with the creation of consumer products.

3D CAD Modelling, P&ID, System Process Simulation, Engineering Design and Product Development expert. I have completed several high value product design projects for various customers in the subsea o... Read more

3D CAD Modelling, P&ID, System Process Simulation, Engineering Design and Product Development expert. I have completed several high value product design projects for various customers in the subsea oil and gas, oil-well drilling, oil-well artificial lift and nuclear industries.

I am a competent mechanical engineering designer and drafter, with working experience ranging from MEP(Mechanical, Electrical, and Plumbing) in building services to manufacturing.

I am a competent mechanical engineering designer and drafter, with working experience ranging from MEP(Mechanical, Electrical, and Plumbing) in building services to manufacturing.

Seasoned designer with approx. ten years industry experience working within the field of architecture and engineering. upon graduating from university in 2006 with a Masters in Advanced Architectural... Read more

Seasoned designer with approx. ten years industry experience working within the field of architecture and engineering. upon graduating from university in 2006 with a Masters in Advanced Architectural Design I worked for Ove Arup as a façade engineer up until 2009 working on prominent schemes for world class architecture firms. In 2009 Iretrained in the field of surveying moving in 2011 to work for a specialist noise and vibration consultancy Emtec Products Ltd producing general arrangements, installation and manufacturing drawings as well as calculations for specification of steelwork. In 2016 I moved to SAS International a world leading suspended ceiling manufacturer working on projects such as the Bloomberg Headquarters and Tottenham Court Road Underground creating templates, reflective ceiling plans, sections, manufacturing drawings and clash detection.

We are a 3D Design and 3D print company based in Glasgow Scotland. We consist of 2 professional CAD designers, both with Masters degrees in Product Design Engineering. Check out www.st3p3d.com for... Read more

We are a 3D Design and 3D print company based in Glasgow Scotland. We consist of 2 professional CAD designers, both with Masters degrees in Product Design Engineering. Check out www.st3p3d.com for some examples of our work.

BA hons degree in product design, 20 years experience in the design and manufacturing industry. Over 10 years experience within the bespoke lighting industry, designing and manufacturing chandeliers a... Read more

BA hons degree in product design, 20 years experience in the design and manufacturing industry. Over 10 years experience within the bespoke lighting industry, designing and manufacturing chandeliers and sculptural lighting installations.

Traffic Management Designer Freelancer: TMBC and TM1/TM2 qualified. With expertise in traffic management principles and practices, I design effective solutions. I analyze data, develop comprehensive p... Read more

Traffic Management Designer Freelancer: TMBC and TM1/TM2 qualified. With expertise in traffic management principles and practices, I design effective solutions. I analyze data, develop comprehensive plans, and implement control measures to ensure safe and smooth traffic flow. My qualifications enable me to mitigate risks and optimize transportation systems, prioritizing efficiency and safety.

As a Mechanical Engineer, I bring a wealth of experience in leveraging state-of-the-art manufacturing equipment, precision metrology tools, and CAD/CAM software to streamline production processes. My... Read more

As a Mechanical Engineer, I bring a wealth of experience in leveraging state-of-the-art manufacturing equipment, precision metrology tools, and CAD/CAM software to streamline production processes. My expertise is not limited to the realm of mechanical engineering; I am a proficient user of MS Word and MS Excel, harnessing these tools to enhance project efficiency and deliver meticulous documentation. I have honed my skills in Design for Manufacture (DFM) principles and possess a strong foundation in statistical analysis, which proves invaluable when optimizing workflows. My grasp of modern manufacturing methods, including rapid prototyping, complements my proficiency in CAD software. This multifaceted skill set enables me to manage multiple client projects simultaneously, showcasing my exceptional multitasking abilities. With an unwavering commitment to quality and adherence to regulatory standards, I boast experience in ISO13485 and EU MDR compliance. My qualifications include an MSc in Advanced Mechanical Engineering, affirming my dedication to enhancing manufacturing efficiency and product quality through innovative solutions. Beyond mechanical engineering, my expertise extends into Building Management Systems (BMS) and Artificial Intelligence (AI). I excel in data tagging, energy analysis, and 3D modeling, offering comprehensive solutions that cater to diverse client needs. With a passion for delivering excellence, I am ready to bring my skills in mechanical engineering, MS Word, and MS Excel to your projects, ensuring they meet the highest standards of precision and efficiency. Projects: • Multi-element Mars Constellation Project - Deploying satellite constellations to facilitate communications while placing two robots on Mars at a certain spot. Required information: coverage analysis, specification of orbital parameters, constellation deployment analysis, single impulse momentum manoeuvres, orbit analysis, launch and return window analysis, total deltaV budget calculation, orbital perturbations, eclipse analysis, communication window analysis and launcher selection. MATLAB has been utilized for calculations and analyses. • Analysing the levels of Nitrogen Dioxide (NO2) in the year before and after COVID restrictions in Scotland - The task assigned is to analyse the levels of Nitrogen Dioxide (NO2) in the year before and after COVID restrictions (2019, 2020 and 2021) in each district of Scotland, to understand how these levels have changed in relation to lockdown restrictions and population density. Google Colaboratory is used with Python as API. • Distribution-free techniques in NASA Uncertainty Quantification (UQ) Challenge 2014 - Stochastic model updating of NASA UQ challenge 2014 using Bhattacharyya distance and Euclidian distance as a UQ metric in Bayesian updating (modal updating) where TMCMC technique is used. Evaluating the outcomes using the distribution-free method, the beta-mixture model. Demonstrating that the distribution-free approach is superior to the traditional distribution approach, which makes numerous assumptions that cause uncertainties. The entire process of Modal updating is done in MATLAB. • Fabricating natural fibre hybrid composite – To extract the fibre and fabrication of hybrid composites containing varying levels of Sterculia foetida, Kigelia africana fibres and to analyse the mechanical properties of the hybrid composite by tensile test, flexural test, impact strength, dynamic mechanical analysis. • Experimental analysis on impact behaviour of E-glass reinforced fibre with non-Newtonian Fluid - Fabricating the E-glass reinforced with non-Newtonian Fluid. A 2D CAD model was created in CATIA and analysed in ANSYS and compared the results with numerical results. For numerical results, the fabricated sample was kept in a setup and sensors were used for finding accurate deviation.

I have a background in shop-fitting, architecture, and space planning, providing visuals and cad drawings for the likes of John Lewis, Marks and Spencer, Harrods, Centrica. I provide 2d cad design dra... Read more

I have a background in shop-fitting, architecture, and space planning, providing visuals and cad drawings for the likes of John Lewis, Marks and Spencer, Harrods, Centrica. I provide 2d cad design drawings, space plan drawings as well as 3d design drawings of products, interiors, furniture, and architectural renders. I also provide a photo manipulation and touch up service as well as a restoration service for damage scanned photographs.

I am a multi-skilled Mechanical Engineer and have worked on design and application engineering roles for 10 years. I am proficient in design using SolidWorks, Inventor and Creo, Finite Element Analys... Read more

I am a multi-skilled Mechanical Engineer and have worked on design and application engineering roles for 10 years. I am proficient in design using SolidWorks, Inventor and Creo, Finite Element Analysis using Ansys and Abaqus and for CFD analysis I use Ansys. I have worked on projects from Oil and Gas, Biomedical, logistics and transportation, filtration equipment and heavy machinery industries. I have expertise in design and analysis of lifts and conveyors, bellows, hot runner systems, plastic product design and injection mold design. For CAD can provide support in sheetmetal, weldment and surfacing, part& assembly design. I create CAD models considering design for manufacturing, assembly and dis-assembly practices and principles. For FEA I can support in linear/non-linear, static and dynamic analysis, structural, buckling, thermal and fatigue analysis. For CFD I can support in steady state and transient, compressible and incompressible and fluid structure interactions projects.

Experienced Draughtsman, who has worked in multiple industries such as Construction, Oil & Gas, Renewables and Military/Defence. I specialize in construction floor plans & mechanical draughting.

Experienced Draughtsman, who has worked in multiple industries such as Construction, Oil & Gas, Renewables and Military/Defence. I specialize in construction floor plans & mechanical draughting.

2D/3D Cad designer with 20+ years experience in a variety of industries.

2D/3D Cad designer with 20+ years experience in a variety of industries.

After nearly 5 years running a product development and 3D printing studio, I'm making to move to freelance to give me more flexibility. I work from a beautiful little studio in The Whisky Bond in G... Read more

After nearly 5 years running a product development and 3D printing studio, I'm making to move to freelance to give me more flexibility. I work from a beautiful little studio in The Whisky Bond in Glasgow, Scotland where I share the space with other designers. I'm an experienced product designer with a proven track record of bringing products from concept to production. I work mainly using Solidworks, and we have several 3D printers in our studio to accelerate the prototyping process.

I have been working with AutoCAD since 2006 on projects from small residential extensions to multi-million pound projects. I have extensive experience in all types of architectural drawings, for all p... Read more

I have been working with AutoCAD since 2006 on projects from small residential extensions to multi-million pound projects. I have extensive experience in all types of architectural drawings, for all purposes. Whether you need planning drawings, building regulation drawings, or construction details, I can prepare all of these.

I am a Mechanical Engineering Student from the City of Glasgow College now pursuing a career as CAD technician. I have extensive knowledge of programs such as Inventor and AutoCAD to create 2D and 3... Read more

I am a Mechanical Engineering Student from the City of Glasgow College now pursuing a career as CAD technician. I have extensive knowledge of programs such as Inventor and AutoCAD to create 2D and 3D models of parts, assemblies and technical drawings. I am happy to assist in general product design and manufacturing tasks, and I would love to gain experience from a large variety of different projects. I have experience designing a conveyor system and building it in the workshop using the technical drawing I created, with great success. I have a personal passion for CAD design as it allows me to be creative and I enjoy the challenges that come with this work.

I am a Mechanical Engineer/Product Design masters student at the University of Glasgow and Glasgow School of Art. I am highly skilled in Solidworks and Solid Edge including the associated rendering pa... Read more

I am a Mechanical Engineer/Product Design masters student at the University of Glasgow and Glasgow School of Art. I am highly skilled in Solidworks and Solid Edge including the associated rendering packages. I have worked on project ranging from car chassis to small electronic devices. View my work @ jareddavidmartin.com

I am passionate about designing amazing spaces, extensions, loft conversions and new builds. I am proud to offer a personal and knowledgeable service from start to finish, exceeding the expectations o... Read more

I am passionate about designing amazing spaces, extensions, loft conversions and new builds. I am proud to offer a personal and knowledgeable service from start to finish, exceeding the expectations of every customer. I have a proven track record of innovative designs, effective problem solving and attention to detail. I am happy to take on all types of jobs from small domestic work to larger projects, all carried out to the highest standards. I am happy to provide Cad services to produce drawings for planning applications or Building Regulations/

Hello, my name is Arnaud I have been performing design and structural analysis since 2008. I have on a variety of projects in the nuclear, automotive, construction, and aerospace sectors. I use Solidw... Read more

Hello, my name is Arnaud I have been performing design and structural analysis since 2008. I have on a variety of projects in the nuclear, automotive, construction, and aerospace sectors. I use Solidworks, Inventor, Catia and Onshape to develop my designs. I am an experienced FEA engineer and can perform non-linear analysis, along with modal and vibration analysis. Please feel free to reach out to me to discuss your project and how I can help your best reaching your goals!

Hello to all the CAD Crowd community, I am an accomplished CAD designer with a HNC in Computer Aided Draughting and Design, with over 15 years experience utilising various drawing packages to produce... Read more

Hello to all the CAD Crowd community, I am an accomplished CAD designer with a HNC in Computer Aided Draughting and Design, with over 15 years experience utilising various drawing packages to produce drawings for Electrical, Instrumentation and Piping & Instrumentation Diagram (P&ID) for Oil & Gas projects eg. Flyndre Cawdor. I have Mechanical & Electrical Building Services experience for projects such as the 81m, 10 storey NHS Emergency Care Centre and Structural projects eg. £4.65m Moray Coast Health Centre. If you need anything drafted into a 2D CAD format I am extremely capable.

I am a Structural CAD/BIM Technician with knowledge and experience in architecture design. A proficient user of Autodesk AutoCAD and Revit with 3 years experience of professional usage.

I am a Structural CAD/BIM Technician with knowledge and experience in architecture design. A proficient user of Autodesk AutoCAD and Revit with 3 years experience of professional usage.

HDP is a family run computer aided design company Specialising in home improvements, commercial and domestic refurbishment. Our director has 10 years experience within the construction industry in... Read more

HDP is a family run computer aided design company Specialising in home improvements, commercial and domestic refurbishment. Our director has 10 years experience within the construction industry in both management and design positions. He has worked for various contractors during this time with many different disciplines including kitchen & bathroom design, HVAC services, main contractors and specialist glass contractors. Throughout the years he has achieved many qualifications, his most recent being an SCQF level 9 in construction management & Civil Engineering. Which can be added to the HNC Construction Management (Grade A) & HNC Computer Aided Draughting & Design. HDP offer a number of services to the construction and design industry and we have broken these services down into 2 main categories: Domestic Services & Commercial services. Domestic Services: ◾Design Proposals ◾Surveys ◾Full planning applications and approvals ◾Building warrant applications & approval ◾Project Planning & Management ◾Structural design and certification (SER) ◾Retrospective approvals for works undertaken with no consent. ◾Home Improvement Application & Design Commercial Services: ◾Paper to CAD drawing conversions ◾2D & 3D Draughting service ◾Operation & Maintenance (O&M) file production. ◾As Installed survey & drawing packages.

As an Associate Member of the Institution of Mechanical Engineers (AM IMechE) I am studying towards becoming an Incorporated Engineer in hope of gaining a recognised IEng status. My professional ex... Read more

As an Associate Member of the Institution of Mechanical Engineers (AM IMechE) I am studying towards becoming an Incorporated Engineer in hope of gaining a recognised IEng status. My professional experience has focused on exposure to the design of mechanical components for manual & hydraulically operated valves in the Subsea & Topside Oil & Gas & Flood Defence Industries. Primarily, I use Autodesk Inventor for 3D Modelling and 2D Drafting of parts for manufacturability and assembly. I have a past experience of producing related calculations through the use of MathCAD for safe design of all parts in operation and a growing knowledge of FEA using Inventor for 3D Component Analysis. Other experience includes direct involvement with Sales, Production, Purchasing, Test & Assembly and with client meetings for project reviews and design updates. I aim to further my career by applying Design & Drafting support and sharing my growing knowledge of the products in order to benefit clients. I hope to make a beneficial impact by utilising Design Reviews and providing a solid structural method towards design inputs in order to help the work flow through numerous concurrent projects.

Recent masters graduate in Product Design Engineering, a CAD heavy course. I have knowledge and skills in CAD/CAM design, rendering, and engineering drawing skills using Solidworks and Fusion 360, and... Read more

Recent masters graduate in Product Design Engineering, a CAD heavy course. I have knowledge and skills in CAD/CAM design, rendering, and engineering drawing skills using Solidworks and Fusion 360, and can assist with manufacturing and general product design tasks as well. 3D printing is a strong interest of mine and it is a topic I have extensive experience with in both research and practical applications. I have previously worked as a product design intern so I have industry experience in the field.