Hire Local CAD Designers near Grimsby, England

Industrial Product Designer with experience working in international consultancies and in-house product development team. Proven track record in client facing roles, PR and Communications of design co... Read more

Industrial Product Designer with experience working in international consultancies and in-house product development team. Proven track record in client facing roles, PR and Communications of design concepts to media and retailers.

A hugely experienced project engineer with over 17 years concentrated in highly regulated engineering activities in aerospace and experimental fields. I have worked with engineering drawings and tec... Read more

A hugely experienced project engineer with over 17 years concentrated in highly regulated engineering activities in aerospace and experimental fields. I have worked with engineering drawings and technical data from the shop floor to the design office, I understand fully the standards, materials and egonomics needed to fulfill the specification and requirements of the task. I have a wealth of experince understanding complex mechanical engineering tasks and can validate designs requiring stress (FEA) analysis.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

I'm a design engineer with a Marine engineering background. I specialise in 2D to 3D CAD conversion, Multibody dynamics simulation and FEA with Autodesk Inventor Professional and Nastran in CAD.

ARCHITECT Expert in: residential architecture( 10 years), interior design( 8 years). Advanced in: landscape design( 2 years), furniture design( 4 years). TAILOR-made SMART design solutions with g... Read more

ARCHITECT Expert in: residential architecture( 10 years), interior design( 8 years). Advanced in: landscape design( 2 years), furniture design( 4 years). TAILOR-made SMART design solutions with good sense for proportion, colour and texture.

Mechanical Design Engineer with 5+ years in industrial design and parametric modeling. I will use Autodesk Inventor to find the solution to your problem. Adept at SolidWorks and Fusion360 and up for a... Read more

Mechanical Design Engineer with 5+ years in industrial design and parametric modeling. I will use Autodesk Inventor to find the solution to your problem. Adept at SolidWorks and Fusion360 and up for any challenge!

Qualified Engineer with more than 25 years experience in design and management. 3D CAD designer with in-depth knowledge of both designing for production and short run model making. Injection Moulding,... Read more

Qualified Engineer with more than 25 years experience in design and management. 3D CAD designer with in-depth knowledge of both designing for production and short run model making. Injection Moulding, Metal Casting, Metal and Plastic Fabrication, CNC Machining, Vacuum Forming, mechanism design. Concept design, invention advice

Hi, I am a freelance 3D Visualiser and qualified Architectural Technician based in Leeds (UK) skilled in 3DS Max/V-ray & AutoCAD. I work in close liaison with architects, developers, marketing agencie... Read more

Hi, I am a freelance 3D Visualiser and qualified Architectural Technician based in Leeds (UK) skilled in 3DS Max/V-ray & AutoCAD. I work in close liaison with architects, developers, marketing agencies and design consultants to produce architectural CGI which is used primarily to communicate design concepts to clients. Working on projects throughout the UK, I provide still imagery, VR and animations to facilitate the marketing and planning requirements of projects, as well as being used as a means of securing project funding and sponsorship. I have over 35 years experience working in a design environment, working with AutoCAD since 1989 & in the mid 1990's I worked as a beta tester for Autodesk and in 1998 had 3D work published in CADdesk magazine. I get most of my work through recommendations, as I put a high value on the quality of work and the ability to hit agreed deadlines. Fees are generally agreed either as a 'fixed fee per project', on a 'daily rate' or 'monthly retainer' for longer term projects.

I have a bachelor's degree in mechanical engineering with 20 years of experience in the field. I use to work as a Manufacturing Engineer, Process Engineer, and Design Engineer. Using the CAD softwar... Read more

I have a bachelor's degree in mechanical engineering with 20 years of experience in the field. I use to work as a Manufacturing Engineer, Process Engineer, and Design Engineer. Using the CAD software is one thing, but understand the feasibility of the product and understand the CNC and 3D printing process is part of the 2D/3D design process. With this experience, I can make a new product from zero to works entirely in the final assembly. I can create a 3D model, 2D drawing, high-quality image rendering with many different file formats: STL, .STEP, .PDF

I am a professional CAD Technician, with working experience within Infrastructure, Structural and Architectural practices. I specialise in Home Design, converting hand drawings and PDFs into CAD and R... Read more

I am a professional CAD Technician, with working experience within Infrastructure, Structural and Architectural practices. I specialise in Home Design, converting hand drawings and PDFs into CAD and Revit, Drainage and Construction Issues.

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need... Read more

Hi my name is Duggie Reid. I am a 3D Design student based in Manchester, UK specialising in product design and 3D printing. I own a 3D printer and am happy to fulfil any printing services you need - from design ideas to modelling it on software to the physical printing of it. Feel free to get in touch with anything you need doing!

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but h... Read more

I have been honing my skills in design, drawing and manufacturing over the last ten years in the marine and architechtural industries. I especially enjoy concept creation and industrial design, but have experience of many areas relating to product design.

I'm a degree qualified Design Engineer with experience working in the Oil & Gas industry in both R&D and an operations support role. From designing small parts to several tonnes of control valve asse... Read more

I'm a degree qualified Design Engineer with experience working in the Oil & Gas industry in both R&D and an operations support role. From designing small parts to several tonnes of control valve assembly and even mapping out the entirety of a CNC machine shop - machines and their accessories included - there is nothing too small or too large for me to design. I offer concept design, reverse engineering and engineered solutions among others.

A member of the Institution of Mechanical Engineers, we provide high quality 3D modelling and photorealistic rendering from small to large products/components. With our tateled and experienced designe... Read more

A member of the Institution of Mechanical Engineers, we provide high quality 3D modelling and photorealistic rendering from small to large products/components. With our tateled and experienced designers, we utilize quality software to produce quality results.

Ten years of professional experience in architectural design and real estate development. Specialized in high quality and prestigious hospitality, residential and commercial projects. Took part in dif... Read more

Ten years of professional experience in architectural design and real estate development. Specialized in high quality and prestigious hospitality, residential and commercial projects. Took part in different stages of projects of different scale, from conceptual design to application drawings, from a family house to a shopping mall.

I'm a mechanical engineer with experience in machine design. 3 years of experience in Solidworks specifically (solid, surface, sheet metal, and weldment). 2 years of experience in Autocad. I make desi... Read more

I'm a mechanical engineer with experience in machine design. 3 years of experience in Solidworks specifically (solid, surface, sheet metal, and weldment). 2 years of experience in Autocad. I make designs for 3d printing (.stl) and drawings for laser cutting (.dxf) and plasma and workshops (lathes, planners,...etc). My skill set includes: -Machine and Product design. -Creating STL, IGES and STEP files for 3d printing and also X_t file for manufacturing. -3D Rendering using Keyshot. -Converting from pdf/sketch/image to DWG/DXF Autocad files. -FEA Analysis using Solidworks simulation and ANSYS Mechanical. -Engineering Drawings. Thanks in advance for letting me design for you.

Qualified Mechanical Engineer. Experienced in product design and prototype manufacture/build. I own a patent for a mechanical steering device for yachts and have been awarded a prize for innovation pr... Read more

Qualified Mechanical Engineer. Experienced in product design and prototype manufacture/build. I own a patent for a mechanical steering device for yachts and have been awarded a prize for innovation presented by Sir Robin Knox-Johnson. I have a broad CAD design experience in both 2D and 3D systems as well as working with 3D printing, and graphic design.

UK-based CAD designer with a Mechanical Engineering degree. Have prior experience with injection moulding, composite moulding, jig and fixture design. Paying attention to detail allows to notice poten... Read more

UK-based CAD designer with a Mechanical Engineering degree. Have prior experience with injection moulding, composite moulding, jig and fixture design. Paying attention to detail allows to notice potential defects before they become a major issue. When creating a design, I consider not only its integrity and functionality, but also factors like as machinability, ergonomics, and cost-efficiency.

Computer-aided design skills. Extensive machine experience. Working with 3D printers. BEng in mechanical engineering.

Computer-aided design skills. Extensive machine experience. Working with 3D printers. BEng in mechanical engineering.

GW Architectural Design - www.drawingplans.co.uk - Located in Gateshead, Tyne and Wear, UK

GW Architectural Design - www.drawingplans.co.uk - Located in Gateshead, Tyne and Wear, UK

I design and deliver thoughtful architecture and interiors supported by photorealistic CGI and immersive VR. My practice spans residential, commercial, hospitality, and luxury sectors, where I combine... Read more

I design and deliver thoughtful architecture and interiors supported by photorealistic CGI and immersive VR. My practice spans residential, commercial, hospitality, and luxury sectors, where I combine design strategy with advanced visualisation to guide clients from concept to construction. With expertise in spatial planning, materiality, and narrative-driven storytelling, I ensure projects are both creative and functional, while the latest technologies and generative design enhance clarity, innovation, and precision. Recognised for adaptability, collaboration, and attention to detail, I bring an integrated approach that unites design vision with technical excellence. Let's collaborate to create spaces that inspire! Feel free to reach out to discuss your next project.

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in... Read more

MSc Advanced Materials and Additive Manufacturing (Distinction) BEng Mechanical Engineering For my Masters Thesis project I designed an FDM printer modification, improving machine dynamics. I have in depth knowledge of the FDM process and how to optimise for: print speed, strength, and quality. Prize winner in many online 3D printing and design competitions, winning approximately £2000 worth of prizes in the past three years: Polymaker ‘3D printed hook tournament: Second place. A combination of mechanical engineering, creative design and DfAM to create the strongest possible 3D printed polymer hook (no closed loop) weighing less than 50g. The final design withstood over a 1 ton load. https://www.thingiverse.com/thing:4682845 https://youtu.be/7JOS1Cv07ts?t=831 Polypanels Design Competition: Second place. https://www.myminifactory.com/object/3d-print-polypanels-shaft-system-93600 https://youtu.be/Hs9tfpPQGmo?t=1989 . E3D Multi-material STL Competition: Second place. Design of a set of compliant pliers intended for multi-material FDM printing: https://www.thingiverse.com/thing:3522722

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas... Read more

An experienced Engineer with MEng in Mechanical Engineering and MSc in Low Carbon Building Design and Modelling. Passionate and committed to contribute towards a greener and sustainable future. Areas of expertise • Building physics (natural ventilation & CFD application, daylighting, thermal comfort, heat transfer) • Energy assessments • Net Zero Carbon Studies • Energy Performance Certifications • Predicted operational energy use at design stage • Heating & Cooling Loads • Produce evidence requirements for BREEAM credits requiring thermal modelling outputs • Thermal comfort & Overheating Analysis • Low Zero Carbon Technologies Studies • Daylighting & Overshadow Analysis • Renewable Energy/Low Carbon Technologies: Photovoltaics, Solar Thermal, Biomass, Heat Pumps, Combined Heat and Power • HVAC systems knowledge Projects • Commercial buildings: schools, offices, healthcare, leisure & sports centers, hotels, retails, university facilities, museum, airport facilities • Residential buildings • Mixed-use developments • Solar PV design (size & select the equipment, energy simulation, electrical drawings & pv panels layout in CAD) • Solar thermal system design & simulation for a house Softwares: IES VE, EDSL TAS, DesignBulder, CAD, Revit, PVsyst, SketchUp, TSOL, STROMA, MS Office

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which inclu... Read more

Having completed three years at university and a 15 month industry placement, I have developed strong CAD skills, specifically using SolidWorks. During my degree I modelled multiple parts which include: an aerospace landing mechanism, a turboprop propeller with gears and casing, and a Cessna 172 wing with various wing tip designs. Whilst on my 15 month industry placement, working for a precision engineering company, I would use SolidWorks on a daily basis in order to create a 3D model from an engineering drawing. Modifications would often be needed to the model in order for the part to be machinable on the CNC machines.

Hi there! I'm Tim, a Product and Graphic Designer based in London. I graduated from Brunel University London with a First Class Honours Degree in Product Design Engineering, during which I spent a yea... Read more

Hi there! I'm Tim, a Product and Graphic Designer based in London. I graduated from Brunel University London with a First Class Honours Degree in Product Design Engineering, during which I spent a year working at award winning consultancy therefore, designing a range of products for manufacture as well as graphic and packaging solutions. ​ My expertise lies in 3D modelling and rendering, as well as graphic design, however I am experienced in the entire design process. I'm currently freelancing part time at design consultancy Makers Department, but I'm always looking to get involved in new, exciting projects, so if you are interested in my work please don't hesitate to get in contact!

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the w... Read more

I've been lucky enough to work with a variety of different industries so far, from games studios to AI startups. I've learnt a lot from each of these experiences and gained a lot of skills along the way. Currently I am open to new short-medium term projects. Ultimately, I'm here to produce the best work possible for whoever I'm working with. If you have a project that requires my skills, please contact me via LinkedIn or my email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Jewellery Designer speciallized in CAD/CAM tecnologies. More than 10 years experience working with companies worldwide. - Authorized Rhinoceros Trainer (ART) - BA (Hons)Jewellery and Silversmit... Read more

Jewellery Designer speciallized in CAD/CAM tecnologies. More than 10 years experience working with companies worldwide. - Authorized Rhinoceros Trainer (ART) - BA (Hons)Jewellery and Silversmithing Design for Industry - A.J.P. Accredited Jewelry Professional by Gemmological Institute of America

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

BEng Mechanical Engineering PTC Creo - Advanced SolidWorks - EXPERT - Mechanical Design Certificated C-ABU5732FLC Prototypes Model Engineer 3D Printing SLA ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒