design is my passion. Read more

design is my passion.

I have over 12+ years of varied experience in Structural analysis and design, BIM in different construction sectors like Buildings, Water and Waste Water treatment plants, Pumping Stations,... Read more

I have over 12+ years of varied experience in Structural analysis and design, BIM in different construction sectors like Buildings, Water and Waste Water treatment plants, Pumping Stations, Tunnels, Tidal Barrier, Flood walls, Bridges, Metro Rail, and Earth Retaining Structures while working for projects based in UK, Middle East, USA, South Africa & India. Key Skills  Structural design of water and waste water projects  Structural design of water retaining structures, pumping stations, Thrust blocks  Structural analysis and design of Tidal barrier, Flood defence walls  Project management, Project co-ordination  Project effort estimation, Cost Estimation, Bidding preparation  Team management  Autodesk certified Revit Structure Professional  BIM management, BIM implementation, BIM process, BIM Training, BIM coordination  Software Training, Mentoring, core team building  Architectural and Structural general arrangement drawings, Civil drawings, Structural Steel detailing, connection detailing  RC detailing with BBS by manual or using CADS RC or similar software’s  Civil 3D modelling, Pipework modelling, Highway modelling  Preparation of Longitudinal sections, cross sections, cut & fill quantity calculation  3D modelling of structures using Revit, Tekla software’s  Clash detection, quantity estimation, 4D/5D modelling using Navisworks  Trained internal auditor, BMS, Audits, Standards preparation  Automation, Lisp programming, scripts, dot net programming  British, Europe, Indian, American, and South African Standards  Attended Revit Technology conference 2015 at Singapore  International work experience

senior mechanical engineering professional with 17 years of experience in design development, new product development, project management in SPM, Material handling, Vacuum technology & food... Read more

senior mechanical engineering professional with 17 years of experience in design development, new product development, project management in SPM, Material handling, Vacuum technology & food processing industries.

I do Provide Services as follows. CAD Concept Design Product Design Tool Design 2D to 3D Conversion 3D Modeling & Simulation Drafting Reverse Engineering Data Conversion Design... Read more

I do Provide Services as follows. CAD Concept Design Product Design Tool Design 2D to 3D Conversion 3D Modeling & Simulation Drafting Reverse Engineering Data Conversion Design Automation Drafting / Detailing Legacy Conversion Engineering Design Change

i am a Product designer, completed MSc.Engineering in Ramaiah College . Bangalore I have 2yr experiance in Design Dept. presntly Working as a free lancer in Bangalore . Read more

i am a Product designer, completed MSc.Engineering in Ramaiah College . Bangalore I have 2yr experiance in Design Dept. presntly Working as a free lancer in Bangalore .

Myself an Mechanical Engineer with Total 5+yrs total Experience in Design and development department, i possess considerable expertise with the design and development activity at machine tool... Read more

Myself an Mechanical Engineer with Total 5+yrs total Experience in Design and development department, i possess considerable expertise with the design and development activity at machine tool industry, sheet-metal, plastic & gauges and fixtues.

70 Years of age. MY EXPERIENCE:-I am a graduate mechanical engineer. I have worked in various engineering industries, such as machine tools, Heavy fabrication, precision machine manufacturers,... Read more

70 Years of age. MY EXPERIENCE:-I am a graduate mechanical engineer. I have worked in various engineering industries, such as machine tools, Heavy fabrication, precision machine manufacturers, pumps, valve manufacturers & hydraulic press manufacturer’s etc-. Now I am a full time freelancer. I HAVE EXPERIENCE OF MORE THAN 35 YEARS AS CHIEF DESIGNER, PRODUCT ENGINEER, R&D ENGINEER, and PRODUCTION MANAGER & AS GENERAL MANAGER. I have more than 20 years of experience in using program tools, AUTOCAD, CATIA, SOLID WORKS, and REVIT ARCH. During my carrier I prepared design & detail drawings with these tools. I do have experience in using MSOFFICE for more than 20 years. I prepare design calculations and any other calculations related to the projects. Using excel & logic functions and prepares reports. proficiency:- 1) Machine design, product design & development in mechanical engineering. 2) Process design: I prepare process drawings and time estimate for processing the products & the individual product elements. 3) Hydraulic machines: Design custom built machines in power hydraulics, suiting to clients applications. I also design hydraulic & pneumatic elements, such as valves, cylinders, & any type of actuators, as per client’s requirement. 4) Civil engineering, Architecture & structural engineering: I worked in a consulting firm as engineer, preparing building design & related structural design. I used program RIVET ARCH & AUTOCAD. 5) I ALSO WORKED OUT SIDE INDIA. 6) I ALSO TEACH, PHYSICS, MATHS, ENGINEERING SUBJECTS, MACHINE DESIGN, THEORY OF MACHINES, STRENGTH OF MATERIALS, THERMODYNAMICS, APPLIED MECHANICS. AND AUTOCAD, CATIA, & RIVET ARCH. 7) YOU HIRE ME ON YOUR PROJECTS . I WILL COMPLETE IT TO YOUR SATISFACTION. Thanks, & Regards, Chilkunda A few critical work projects on ▒▒▒▒▒▒ platform:- 1) Hydraulic lift & Trolley 2) Food Storage 3) Kitchen aids 4) Research on Tractors manufacturers 5) Pressure vessel design 6) Gear box design 7) Machine tools design 8) Fitness Exercise machines designs 10) Engineering subjects teaching 11) Hydraulic Valve design. 12) Products costing. 13) 3D modeling 14) Auto Cad drawings 15) Many more.

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in... Read more

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Material Selection & Load Calculation on Structural Beam. • Mechanical Engineer working on Basic (conceptual) and detailed engineering designs for sectors like power plant, process plant and waste water treatment plant. • Mechanical Design Engineer who have worked on different projects & handled a challenging technical development position on Precision Sheet Metal Enclosure Designing using Solid Works and AutoCAD.

Myself Ravindra Babu.B having 6+ years of experience in Auto Cad 2d and 3d designing.I have good hand in architectural,highway Drafting and Gis allied works.I had experience in Revit also.I can... Read more

Myself Ravindra Babu.B having 6+ years of experience in Auto Cad 2d and 3d designing.I have good hand in architectural,highway Drafting and Gis allied works.I had experience in Revit also.I can produce good quality drawings and deliver in said time.

‘Optimization and Analysis of Two Gating System to Achieve Zero Defect in Casting Using Computer Aided Simulation Technique’. BLB International Journal of Science and Technology (Special Issue... Read more

‘Optimization and Analysis of Two Gating System to Achieve Zero Defect in Casting Using Computer Aided Simulation Technique’. BLB International Journal of Science and Technology (Special Issue November 2015) ISSN: 0976-3074. (Proceedings of National Conference on Product Designing and Manufacturing NCPDM 2015 @MNNIT, Allahabad)

I can make 2d autocad drawings from rough sketch provided. I can make 3d models using revit architecture from the autocad drawings. I can deliver the projects on time with full satisfaction. Read more

I can make 2d autocad drawings from rough sketch provided. I can make 3d models using revit architecture from the autocad drawings. I can deliver the projects on time with full satisfaction.

We are Team Of Four Members having 3ys of Experience in Design and Manufacturing. you can find our company website below. https://anadessolutions.wixsite.com/website Strong Knowledge on 3D... Read more

We are Team Of Four Members having 3ys of Experience in Design and Manufacturing. you can find our company website below. https://anadessolutions.wixsite.com/website Strong Knowledge on 3D Modelling, Detailing for Manufacturing, Computer Aided Engineering . Good Hand Full of knoeledge on Giving Technical Suggestions on Mechanical, Aero Space and Auto Motive Systems. Have Good Industrial Working and Reserch Knowledge on Various CAD and FEA Packages like Auto Cad, Catia V5, Solid Works, UniGraphics and Ansys Structural and Fluid Dynamics. I have worked as a Design engineer for a period of 1 year 3 moths were I used to develop 3D Models and Detailing for the Auto Motive and Mechanical Industries. I used to Give the Technical Suggestions Based on the Problem Arised for the Food Processing and Food Storage Industries with Suitable Equipment Design and drafting to store and Supply the food. While Giving the Technical Solutions I used to Do FEA Analysis in Ansys To Study the PlM of the Suggested Technology to the Customers. People Can Find My Excuted Projects In this Term. 1. I have designed a food trolly to store and supply the food in Hospitals. The system contains a freezer to freez the food and a heater to heat the food and it can be operated by two men. It has provided the trays to place the food followed by two compartments with minimum gap to circulate the air to freez and heat the food. It has Provided two way doors to operate in either Directions and Provided the Detailing for the Whole Technology it took 45hrs. 2. I have done another project on Reverse Engineering on Two Car Models were I have designed The car Domes in Catia Surfacing and Successfully Excuted The Aerodynamics Studies On the Models these results are requested by the customers to use for the validation. It Has Taken totally 300hrs In the Design Phase and Another 200hrs in the FEA Phase. 3. I have done one more Project on Creating Standerd Test Pieces to use in the Prototype testing were I have designed the models in Catia and they have sent to 3D Printing with Compleate Detailing after the Prototype Testing results were Extracted from the Test and Validated in The Ansys To study their Mechanical Properties For the Composite AlSic MMC Total 400hrs has taken to provide compleate validation to the customer. 4. Another Project Has Excuted on Plant Layout. A Plant Layout Has Created In Catia To Provide the Food Processing Layoutto the Customer. Compleate Lay out Has Delivered to the Customer With in 200hrs. 5. I have excuted project which has taken 6moths. Were I have managed a team of 11members designers and Draft mans to design and to provide Detailing to Couple of Manufacturing Machianary to change their Size and to convert them into Indian Standers. We have Excuted the Whole Project In 3Phases in first Phase All Assembly Componets were created with Compleate Detailing in second Phase Sub Assembly Drawings were Created with their Cad Model with the Sap Numbers to the All Componets with Compleate BOM Creation in the Third Phase All Sub Assemblies were Assembled and created a Final Product with Compleate Detailing. These are the major Projects I Have Excuted In this Term. After this I have Worked as Freelancer till March 2018 In providing Technical Solutions and to provide Detailing for the Manufacturing Units. Now I am Working As a Design Engineer in Oil And Gas Domain to provide the Solutions for Onsite Coordinators to Design and Detailing For the Systems which are used in the Oil and Gas Fields.

My name is Madhukar, I have completed my Diploma In Tool and Die Making from NTTF Dharwad, Karnataka. I have 4 years of experience in Design and Development. I am good drawing reader, Good... Read more

My name is Madhukar, I have completed my Diploma In Tool and Die Making from NTTF Dharwad, Karnataka. I have 4 years of experience in Design and Development. I am good drawing reader, Good knowledge of Material science. Good experience in Modeling 3D and 2D drawings using Creo Parametric 3.0 and solid Edge software.

16+ years of professional experience in design, development of industrial products & engineering management – the last four years in senior management role with a leading flow control solution... Read more

16+ years of professional experience in design, development of industrial products & engineering management – the last four years in senior management role with a leading flow control solution supplier. Demonstrated skills in project management, streamlining work flow, bottle neck identification & elimination, planning & prioritizing goals. Extensive experience in design engineering, new product development (NPD), value engineering, project planning & program management. My working policy stands for "Commitment", "Timely Response", "On Time" and "Ownership".

B.E. (Hons.) Civil MSc. (Hons.) Economics Knows CAD softwares related to Civil Structures as well as mechanical engineering simulation softwares. Read more

B.E. (Hons.) Civil MSc. (Hons.) Economics Knows CAD softwares related to Civil Structures as well as mechanical engineering simulation softwares.

WORKING AS A DESIGN ENGINEER IN A AUSTRALIAN BASED AEROSPACE MNC. Read more

WORKING AS A DESIGN ENGINEER IN A AUSTRALIAN BASED AEROSPACE MNC.