Hire Local CAD Designers near El Segundo, California

20yrs+ 3D Design-Mechanical-Architectural-Structural-Marine/Boat-Aerospace

20yrs+ 3D Design-Mechanical-Architectural-Structural-Marine/Boat-Aerospace

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I can put together a professional grade, permit-ready set of drawings for most houses, accessory buildings, and remodels. In some cases, a structural engineer may be required to provide calculations.... Read more

I can put together a professional grade, permit-ready set of drawings for most houses, accessory buildings, and remodels. In some cases, a structural engineer may be required to provide calculations. I operate primarily in Northern California, but can design remotely in 46 states. Website: https://tdtconceptdesign.weebly.com/

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

I offer reliable CAD and Revit drafting for small architectural tasks: turning basic .dwg plans into Revit drawings with 3D views, CAD redlines and other minor changes. I focus on smaller jobs so I ca... Read more

I offer reliable CAD and Revit drafting for small architectural tasks: turning basic .dwg plans into Revit drawings with 3D views, CAD redlines and other minor changes. I focus on smaller jobs so I can deliver fast turnaround and clean, professional results.

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturin... Read more

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturing, injection molding, forming methods, and CNC milling » Author of educational series on designing for 3D printing, manufacturing, and assembly » Proficient modeler of home goods, accessories, jigs & fixtures, industrial parts, and more.

I have a strong technical education foundation and a passion for design. I became certified in Drafting and Engineering Support in Architecture and Civil Engineering and I'm in the process of finishin... Read more

I have a strong technical education foundation and a passion for design. I became certified in Drafting and Engineering Support in Architecture and Civil Engineering and I'm in the process of finishing up a certification in Advanced Manufacturing. I also recently trained with a renowned irrigation professional in irrigation design and am in the process of becoming a Certified Irrigation Technician. Through my education and career, I have become fluent in Adobe Suite, AutoCAD, LandFx, Fusion360, and CorelDraw; and I have specialized in CNC, Laser, Water-jet cutter, 3D printing, and prototyping. I also have 20 years of experience running and managing a successful company in the service industry.

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded... Read more

I am an experienced embedded hardware and firmware engineer specializing in high-performance, low-power and compact device development with over 10+ years. My expertise covers a wide range of embedded processors and communication interfaces, as well as advanced signal and sensor integration. Key Skills: - Embedded processors: STM32, ESP32, TMS32, DM3730, DA14583, LoRa, nRF52, Arduino, Atmega, PIC, RAK4, SIM7 - High-speed routing up to 24 Gbps PCIe, SDI - Memory interface: SRAM, DDR, DDR2, DDR3, DDR4 - Communication: PCIe, SATA, HDMI, Ethernet, USB, UART, SPI, I²C, CAN, RS485/422, RS232C -Wireless: Bluetooth, Wi-Fi, Z-Wave, Zigbee, RFID Sensor integration: ECG, PPG, HRM, SPO₂, CO₂, Temperature, PIR, Touch, Pressure - Simulation tools: MATLAB, Proteus, Multisim, HyperLynx. My Advantages - Stable and reliable design - Fast and precise development - Deep industrial understanding - Safety and ergonomic awareness - Cost-effective manufacturing insight - Strong collaboration experience - High-quality prototype to product - Commitment to perfection Over a decade of successful embedded design experience, completing numerous projects across industrial, medical, and IoT applications. Proven ability to deliver top-quality results in minimal time through strong technical insight, practical design sense, and effective client collaboration.

Experienced Experiential Designer - architecturally trained, background in graphic design and fine arts. Proven track record of successful deliverables for a variety of clients across a wide spectrum... Read more

Experienced Experiential Designer - architecturally trained, background in graphic design and fine arts. Proven track record of successful deliverables for a variety of clients across a wide spectrum of industries. Deeply skilled with Sketchup, Illustrator, Photoshop, Indesign, and design research - Mac or PC. Conceptual hand sketching is fun...

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

I'm the co-founder and a director at Cad Crowd. Send a message with feedback or suggestions to improve the Cad Crowd community 🚀

I'm 2D/3D animations & landscape designer and i love natural work and have a awesome experience in Landscaping design & gardens.. i do - Design 3D Building, Furniture, Landscapes & Gardening. - De... Read more

I'm 2D/3D animations & landscape designer and i love natural work and have a awesome experience in Landscaping design & gardens.. i do - Design 3D Building, Furniture, Landscapes & Gardening. - Design Pictures, Logo & All Marketing Stuff. - Utilization Solutions

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can u... Read more

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can understand and contractors can utilize to build your project.

Specializing in sheet metal and tubing, with extensive experience in prototyping and product design for manufacturability. Skilled in SolidWorks, having created over 1000 parts and assemblies with bui... Read more

Specializing in sheet metal and tubing, with extensive experience in prototyping and product design for manufacturability. Skilled in SolidWorks, having created over 1000 parts and assemblies with build sheets, BOM, etc. Focused on optimization of efficiency, precision, and production readiness.

I am a CAD Jewelry Designer | 3D Sculpture Artist with 15 years of experience. To evaluate the quality of my work, please see my web site. 3dwaxcarving.com I have had extensive training in both... Read more

I am a CAD Jewelry Designer | 3D Sculpture Artist with 15 years of experience. To evaluate the quality of my work, please see my web site. 3dwaxcarving.com I have had extensive training in both traditional and digital sculpting. I began my studies as a classical sculptor finishing the Sculpture Art School. After art school, I majored in Industrial Design. Finally, I studied 3D digital modeling at the Art Institute of California in San Diego,CA. During my career, I worked in top Hollywood and video game companies as a lead 3d character modeler. I contributed to major projects such as Dune, Law & Order, Dan Dare, Ever Quest, Deep Space PS3 and others . I studied jewelry design under the tutelage of a San Diego based leading jewelry crafter and manufacturer. My passion is for organic modeling. I always strive to create 3D models that are as lifelike as possible. I work to embody each model with spirit and emotion so that my models have character. I use an eclectic tool-set of modern modeling software to achieve this goal. Currently I am working as an independent 3D Sculpture Artist working with jewelry, gift, video game and other manufactures. For the jewelry industry I create sophisticated organic forms with Faberge quality. For toy and gift manufacturers I create 3d relief sculpture, sculpture miniatures, figurines, belt buckles, Christmas ornaments, and many other products. For video game companies I am modeling and texturing high and low polygon stylized and realistic characters.

I am an experienced exhibit designer working in the design field for over fifteen years. I recently worked as Design Director with Exponents in San Diego for seven years. I have created original modul... Read more

I am an experienced exhibit designer working in the design field for over fifteen years. I recently worked as Design Director with Exponents in San Diego for seven years. I have created original modular designs as well as custom large scaled booth designs. I have also designed high-end custom furniture for a number of architects and interior designers whose clients required new and innovative. I am able to offer you experience as well as a love of current and future trends in our ever changing industry.

A-4RM is a product development & prototyping company based in The Bay Area. We help companies with CAD modeling, Industrial Design, Renderings, Structural Packaging Engineering, High Fidelity Prototyp... Read more

A-4RM is a product development & prototyping company based in The Bay Area. We help companies with CAD modeling, Industrial Design, Renderings, Structural Packaging Engineering, High Fidelity Prototyping, Graphic Illustrations, and UX/UI. We have experience working with clients such as Google, Valve Steam, Amazon, and other medium to small start-ups in a variety of categories. We do Solidworks 3D CAD, 3D printing, sketching,concept development, and insights research. For packaging, we have capabilities such as implementing foam calculations, palletization, Artios CAD die lines made for Kongsburg tables. We create graphics and also POP displays and environments. Industries include: -Consumer Products -Consumer Electronics -Medical devices & machines -Transportation -Industrial -UX/UI ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Bachelor in Design by Unesp and master in multimedia by Unicamp (Brazil both). CEO and co-founder of Samp Motors.

Bachelor in Design by Unesp and master in multimedia by Unicamp (Brazil both). CEO and co-founder of Samp Motors.

Experienced Helicopter Maintenance Engineer with 20+ years in helicopter component maintenance. For the past 4 years, active in aircraft component design and certification. Skilled in airworthiness co... Read more

Experienced Helicopter Maintenance Engineer with 20+ years in helicopter component maintenance. For the past 4 years, active in aircraft component design and certification. Skilled in airworthiness compliance, technical documentation, and regulatory processes. Seeking opportunities in aircraft component design and certification.

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product... Read more

Markus Scholten is an accomplished engineering executive with over 20 years of international experience in automotive design, development, and manufacturing. His expertise spans all aspects of product engineering, from feasibility analysis and cost estimation to prototyping and production. Notable achievements include designing a self-balancing three-wheel vehicle, engineering the Will.I.AMG for the 2022 Miami F1, and developing the Nikola One hydrogen-electric Class-8 truck. Markus has a proven ability to lead projects from concept to completion, leveraging skills in CAD design, kinematic layout, and advanced manufacturing techniques. He has successfully collaborated with global stakeholders and managed teams across diverse projects, including the development of the Fisker Karma Sunset retractable hard top, Aptera’s mass-production-ready body redesign, and the high-performance LaMarc hypercar. Fluent in German, Markus also brings extensive experience working with renowned brands like BMW, Audi, and Fisker Automotive. He holds a Mechanical Engineering degree and excels in program management, problem-solving, and efficient manufacturing practices. Whether leading large teams or contributing as a hands-on innovator, Markus consistently delivers cutting-edge engineering solutions that align with business goals and customer expectations.

I’m a Solidworks Designer with 14 years of working experience in product and mechanical design. Proficient at creating detailed technical drawings, advanced surfacing, solid part modeling and complex... Read more

I’m a Solidworks Designer with 14 years of working experience in product and mechanical design. Proficient at creating detailed technical drawings, advanced surfacing, solid part modeling and complex assemblies for product manufacturing and machine builds. Adept in maximizing form, fit and function through meticulous design model evaluation. Process Plant Designer As the Solidworks PDM Administrator and Drafter my responsibilities include maintaining PDM vault and revision control, managing mechanical BOM's, provide accurate and detailed manufacturing drawings, design process equipment layout using AutoCAD and Solidworks, Prepare Assembly Retrofit Document Guides and Build Packages and (P&ID) Process & Instrumentation Diagrams using AutoCAD • Design detailed assemblies and subassemblies of Process Piping Systems using Solidworks • Design Process Equipment Layout using AutoCAD and Solidworks • Create custom parts and pressure vessel manufacturing drawings. • Prepare Assembly, Retrofit Document Guides and Build Packages. • (P&ID) Process & Instrumentation Diagrams using AutoCAD • Solidworks PDM Vault and Bill of Material management Lead Jewelry Designer Oversee a design team of three. I was the go-to expert for evaluating product designs, parts, assemblies, drawings, dimensioning and tolerancing. I would set the creative direction for product lines and insure manufacturability. R&D of micro precision watch mechanisms and components. Design intricate high-end custom jewelry, bridal and watch lines. • Design machines, fixtures, tooling and molds for jewelry and watch production. • Reverse engineering of Swiss made micro precision mechanical watch movements Detail design of all internal and external wrist watch parts and components. • Implement equation driven design tables to existing and new Solidworks files for an efficient and automated design process.

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional... Read more

I am a mechanical engineer with over 15 years of experience. I have a master's degree in mechanical engineering with a focus on robotics and control systems. I am a Certified SolidWorks Professional (CSWP). I have experience in part modeling for molded, machined sheet metal and die cast parts. I also have experience in surface modeling and assemblies and engineering drawings. I am also capable of aiding in material selection through calculation and/or simulation.

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite... Read more

I am a Mechanical Engineer with 7 years experience in the Aerospace , and 5 years in the Automotive industries. Many years of 3D CAD work; excellent in CATIA, SolidWorks, and AutoCad. Expert in Finite Element Modeling (CATIA, ABAQUS, LS-DYNA) for both composite and homogeneous materials. Hands on experience with manufacturing processes for Aluminum, Composites, and metal bonded products.

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contr... Read more

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contract Roles

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

I have worked as an industrial and transportation designer for over 15 years. I am very proficient in Autodesk Alias, and I specialize in executing models quickly -- and with quality. In certain cas... Read more

I have worked as an industrial and transportation designer for over 15 years. I am very proficient in Autodesk Alias, and I specialize in executing models quickly -- and with quality. In certain cases, I can also provide design input.