Hire CAD designers & engineers in Fontana, California

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

-Full Time Medical Device Mechanical Engineer and Product Designer -Experienced with Autodesk Fusion 360, Solidworks, Creo Parametric, Siemens NX, and ANSYS

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photoni... Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

+ Lots of experience in designing complex mechanical systems, mainly competition robots and robot components + Experience in designing technical 3D prints, from compact, low cost belt sanders to modu... Read more

+ Lots of experience in designing complex mechanical systems, mainly competition robots and robot components + Experience in designing technical 3D prints, from compact, low cost belt sanders to modular desktop organizers + Strength of creativity used to value and emphasize elegant, functional designs + Multiple years of SolidWorks CADding and Rendering experience + Helped design a world championship level competition robot, winning a design award. + Designed an affordable, compact belt sander, receiving thousands of upvotes and multiple rewards on Reddit

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

3D CAD designer, concept to production prototype engineer, creative, and problem solver. If you're an entrepreneur looking to get professional renderings done for marketing purposes, you need a printe... Read more

3D CAD designer, concept to production prototype engineer, creative, and problem solver. If you're an entrepreneur looking to get professional renderings done for marketing purposes, you need a printed prototype to test, or you need to take a prototype to full-scale production, I have experience with each. I'm flexible on my rate depending on the job and typically spend more time than I bill to make sure my clients are 100% satisfied.

A meticulous and performance-driven professional with over eight years of experience in architectural design and technical documentation. Proven expertise in creating precise fabrication, permit, and... Read more

A meticulous and performance-driven professional with over eight years of experience in architectural design and technical documentation. Proven expertise in creating precise fabrication, permit, and erection drawings using advanced 3D modeling tools (Revit, Rhino, Dynamo), with a strong focus on adhering to design specifications and manufacturing constraints. Skilled in managing tight schedules, solving field problems efficiently, and collaborating within interdisciplinary teams to ensure on-time project completion.

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron i... Read more

Aaron is a high-powered, multi-talented engineer capable of delivering end-to-end product design. Having worked on everything from intricate software systems to government aerospace contracts, Aaron is able to develop elegant solutions to any problems laid at his feet. Aaron is currently a staff designer at Teveri LLC, where he has created numerous biometric wearables based on a liquid-metal technology that he also played a key role in developing.

I design everything, I use CATIA and Solidworks for CAD projects. I do CAM works using Powermill and finally render by Keyshot If you need. I also can do art works such as logo design using Photoshop

I design everything, I use CATIA and Solidworks for CAD projects. I do CAM works using Powermill and finally render by Keyshot If you need. I also can do art works such as logo design using Photoshop

20yrs+ 3D Design-Mechanical-Architectural-Structural-Marine/Boat-Aerospace

20yrs+ 3D Design-Mechanical-Architectural-Structural-Marine/Boat-Aerospace

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contr... Read more

R&D / Electromechanical Engineer / Product & Prototype Development / Mechanical, Electronics, PCB & Software Design / Inventor – Turning Innovative Ideas into Real Devices / Open to Full-Time or Contract Roles

My Outlook: Every product design project begins with a jumble of vague puzzle pieces. The pieces… market analysis, competitive analysis, price points, innovation, differentiation, aesthetics, concinn... Read more

My Outlook: Every product design project begins with a jumble of vague puzzle pieces. The pieces… market analysis, competitive analysis, price points, innovation, differentiation, aesthetics, concinnity, function, ergonomics, materials, manufacturing processes, tooling, assembly, packaging, shipping, users, manufacturers, costs, and the client. A myriad of considerations assemble into a design that makes your product unique, pertinent, targeted within its market, and profitable… a tangible object of desire and promise... a crisp image that makes sense. Every product wants to be something… to be desired and to realize its potential. I strive to stimulate that desire and optimize that potential… to solve the puzzle. My clients' success ensures my own and realizing that desire and potential benefits us both. My Experience: I use my degree in industrial design as a product designer/developer covering a wide variety of products. I have 20+ years of 3D modeling and product development experience. I have the resources to do it all... from concept to point of purchase and everything in-between. My Feedback, received and given: “Steve did great work helping us detail our product for manufacturing. He took the time to really understand the project and its intricacies instead of diving head first and by the end of this job, had an intimate understanding of all the details. He is talented and was willing to research new methods to help meet our stringent product constraints. We went through several discussions and he was excellent at being responsive and keeping things on track. He produced high quality solidworks assemblies and files. Overall he went above and beyond what was expected of him. Highly recommended contractor, A+++” —robocular “Antoine is an outstanding client to work with. He's quite knowledgeable and organized with clearly established goals coupled with exceptional communication skills. This project had some challenging constraints outside typical manufacturing and product design and development norms, but we worked through these challenges while staying within the target budget for the product. This project was more than I had bargained for, but I relished the challenge and Antoine appreciated the effort I put into it, which made this job particularly satisfying. I hope to work with Robocular again in the future.” —Io-Design “Working with Steve was a pleasure, not only do I think he’s an all-around good guy, but his approach to our project was great. He was able to take our idea and bring all his experience in making it better. Our initial idea was transformed into a product that ended up being cheaper to produce and nicer, while being more practical. We were able to overcome the hurdle we encounter and find solution that made it work! Also, he often came back with a different idea of doing things that were very practical. I Highly recommend him. ” — yvesl “Yvesi came to me with the need for a design for a grain dispenser for feeding livestock. As is often the case, he showed me a design from another designer he had hired that didn't meet the product requirements. This design was too large and could not be sold at a profit due to inappropriate and impractical manufacturing processes. Through close collaboration, we came up with a design that is half the size, more aesthetically pleasing and user friendly, and is simple to assemble and install. Also, it will be sold at a projected price point that is 10% lower than the competition at a projected 90% profit margin while enjoying relatively low capital expenditures. It was a pleasure working with yvesi on this project and I'm looking forward to working with him again in the future.” —Io-Design “Io-Design was extremely professional, knowledgeable, and easy to work with. He provided designs that were exactly what we were looking for and he took into account the manufacturing. I would recommend him to anyone. ” — Westone “As mentioned in the job description, Blake works for a company that represents the ultimate, uncompromising audio experience – revolutionary sound; unrivaled comfort and fit; with superior, innovative design in the earphone market. While they are well known among audiophiles and professionals who rely on uncompromising audio, they are less so in the consumer market. This project was part of an effort to update their earphones look, feel, and user experience to the level of their best in class earphone technology... the challenge being that their existing monitors/earbuds were to remain unchanged. Through close collaboration, we came up with a design that practices concinnity with the existing monitors, introduces innovative solutions, targets the consumer market, and enhances brand recognition. Superior design was the point of this project and together we have achieved that goal. Blake is a pleasure to work with and I'm looking forward to the next project.” —Io-Design

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D f... Read more

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D floor plans, elevations, and section drawings ✅3D modeling in SketchUp & AutoCAD ✅Revit MEP electrical layouts and system design ✅Photorealistic rendering for presentations ✅Electrical drafting for residential and commercial projects ✅CAD Conversion ✅Clash Detection and Animation

3D modeling professional

3D modeling professional

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturin... Read more

» B.S. in Manufacturing & Design Engineering from Northwestern University » 6 years CAD experience (Solidworks, Fusion 360, NX, Onshape) » Designer and engineer of parts made via additive manufacturing, injection molding, forming methods, and CNC milling » Author of educational series on designing for 3D printing, manufacturing, and assembly » Proficient modeler of home goods, accessories, jigs & fixtures, industrial parts, and more.

A-4RM is a product development & prototyping company based in The Bay Area. We help companies with CAD modeling, Industrial Design, Renderings, Structural Packaging Engineering, High Fidelity Prototyp... Read more

A-4RM is a product development & prototyping company based in The Bay Area. We help companies with CAD modeling, Industrial Design, Renderings, Structural Packaging Engineering, High Fidelity Prototyping, Graphic Illustrations, and UX/UI. We have experience working with clients such as Google, Valve Steam, Amazon, and other medium to small start-ups in a variety of categories. We do Solidworks 3D CAD, 3D printing, sketching,concept development, and insights research. For packaging, we have capabilities such as implementing foam calculations, palletization, Artios CAD die lines made for Kongsburg tables. We create graphics and also POP displays and environments. Industries include: -Consumer Products -Consumer Electronics -Medical devices & machines -Transportation -Industrial -UX/UI ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I am a professional CAD and 3D design specialist with strong experience in industrial, architectural, and engineering projects. I focus on transforming ideas into precise and realistic models that com... Read more

I am a professional CAD and 3D design specialist with strong experience in industrial, architectural, and engineering projects. I focus on transforming ideas into precise and realistic models that combine technical accuracy with creative vision. My expertise includes developing detailed floor plans, elevations, and complex 3D models, along with producing high-quality renderings and visual presentations. I also have solid experience in GIS mapping and site analysis, which allows me to integrate spatial understanding into my design process. By combining design precision, engineering knowledge, and aesthetic sense, I create designs that are both visually engaging and functionally sound. My goal is to deliver practical, buildable, and visually refined solutions that meet client expectations and bring every concept to life.

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic... Read more

Empower your projects with a results-driven freelance engineer! A proactive leader in engineering, I thrive in collaborative cultures, tackling tasks with urgency and efficiency. Adaptable to dynamic environments, I stay focused on delivering solutions that exceed expectations. Let's drive success together.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Experienced in 3D CAD modeling in Fusion 360, Solidworks, Inventor, and OpenSCAD Contact for CAD and design services in Fusion 360 or Inventor

Experienced in 3D CAD modeling in Fusion 360, Solidworks, Inventor, and OpenSCAD Contact for CAD and design services in Fusion 360 or Inventor

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentrati... Read more

I am an inquisitive, self-learning student currently gaining hands-on experience while finishing my college education. Currently, I am working towards a BS in Biomedical Engineering with a concentration in Mechanical Systems at California Baptist University. Outside of school, I am heavily involved in the collegiate design competition Formula SAE where I lead a team of six engineering students in designing, fabricating, and validating the chassis and ergonomic systems of Cal Baptist Racings' sixth competing internal combustion racecar. In the past, I have worked in a variety of roles in multiple fields, including electrical, warehouse, and student life, where I have gained experience in teamwork and the execution of engineering solutions. My plan for the future is to continue gaining engineering experience through Formula SAE, summer internships, and scholastic projects.

I learned to draft in high school not knowing I would be able to use drafting skills with CAD. I thoroughly enjoy CAD and have been making drawings every day for many years. My skills are mostly mecha... Read more

I learned to draft in high school not knowing I would be able to use drafting skills with CAD. I thoroughly enjoy CAD and have been making drawings every day for many years. My skills are mostly mechanical, but I also wired Control Panels for several years . I use a close facsimile of ACAD called Bricscad. I have also worked with Solidworks. And of course I have Free Cad / Blender / Paint Dot Net / and Inkscape should the need arise. I enjoy 2D Drafting or 3D Modeling, and yes, I will continue to create, innovative and have fun !! .

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can u... Read more

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can understand and contractors can utilize to build your project.

I began my journey into design and engineering services at the age of 13, when I needed to fill an elective course as a freshman in high school. I randomly chose something called "Mechanical Drafting... Read more

I began my journey into design and engineering services at the age of 13, when I needed to fill an elective course as a freshman in high school. I randomly chose something called "Mechanical Drafting Basics" and the rest is history. After that first class, I had my first taste of purpose in life!! It was art within boundaries, and it was purely fascinating to me. I have never deviated from this path over the last 20+ years, through college, and my career that has spanned various industries. I am now fortunate enough and extremely excited to be in a position to put my skills to work for myself, and for you. At Sonoma Valley Design Engineering we provide a passion and dedication to design that reflects my values and desire to build long lasting client relationships. My goal is to help you succeed, in any way I can. This is more than a job, this is a lifetime of craft and working towards being the most effective engineering services provider I can be. I hope that we can build a long-lasting relationship that is beneficial to all.

I have worked as an industrial and transportation designer for over 15 years. I am very proficient in Autodesk Alias, and I specialize in executing models quickly -- and with quality. In certain cas... Read more

I have worked as an industrial and transportation designer for over 15 years. I am very proficient in Autodesk Alias, and I specialize in executing models quickly -- and with quality. In certain cases, I can also provide design input.

Experienced Experiential Designer - architecturally trained, background in graphic design and fine arts. Proven track record of successful deliverables for a variety of clients across a wide spectrum... Read more

Experienced Experiential Designer - architecturally trained, background in graphic design and fine arts. Proven track record of successful deliverables for a variety of clients across a wide spectrum of industries. Deeply skilled with Sketchup, Illustrator, Photoshop, Indesign, and design research - Mac or PC. Conceptual hand sketching is fun...

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and constructio... Read more

Michael is a Registered Landscape Architect with over 20 years of experience in a diverse cross-section of landscape architectural projects as well as client specific custom design and construction drawing preparation.