Hire Local CAD Designers near Norristown, Pennsylvania

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned... Read more

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned. Joining your firm will gauge where I stand. No better opportunity than this can come my way. I can showcase my talent and prove my skills here, while in turn, I can learn how this industry functions in and out. That is why you may hire me for this internship.

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background w... Read more

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background with a powerful record of ten years active expertise in diagnostic repair, project and merchandise development, business management, and engineering strategies. Established ability to with success analyze a team’s skills and hone in on those attributes to form a cost effective workplace. Demonstrates the flexibility to quickly learn in new areas furthermore delivering new ideas to the table, has effectively showcased being a convergent thinker and a pacesetter.

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester... Read more

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester University of Pennsylvania Biomedical Engineering program to adopt more 3D printers and expand their CAD softwares through my own use of such technology. Through such technological skills, I played a role in 3 additional Senior Design Projects aside from my own as a Junior and Senior with my 3D modeling and printing expertise, and improved the technical outputs of Chester High School to inspire students into STEM field careers by helping a team win 2nd place in their local science fair competition with a modular, 3D printable water filter. My background in designing biomedical devices, engineering hydroponic system attachments, assembling mechanical systems, and fine-tuning 3D printable gadgets will bring a wide perspective and various technical skills to any project.

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Renderi... Read more

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Rendering, Strain, and Flow Analysis Trained Hobbies: Music, Art, Optics, Robotics, Soccer, Video Games

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3... Read more

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3.0 and (REX- Reverse Engineering Extension , Autodesk Inventor, Geomagic Design / Design X, AutoCAD (Mechanical), and Autodesk Fusion 360. I'm also highly skilled in the following CAD/CAM Software: MasterCam X7 to X9, Esprit, Bob cad /cam

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as... Read more

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as a CNC machinist and toolmaker Own small machine shop-specializing in prototype machining and development. i have 3 axis milling capability with a HAAS VF3 CNC machining center, I also have both CNC and manual lathe, 3-D printer, 4 axis router, 4 axis laser Diode and IR) for engraving and cutting of thin metals , TIG and MIG welding, surface grinding, and extensive experience in CNC programming, and fixture design for machining . My primary focus is prototype development, and design for manufacturing. I prefer to deign and build small mechanism and machine components.

Proficient in using Revit for comprehensive project development, from concept to completion, including the creation of custom project templates and parametric families. Highly skilled in creating and... Read more

Proficient in using Revit for comprehensive project development, from concept to completion, including the creation of custom project templates and parametric families. Highly skilled in creating and assigning parameters within Revit families to support the development of schedules, quantity takeoffs, tags, and other critical documentation for project coordination. Fully competent in creating and maintaining Revit projects, including working with Central and Local Models to support collaborative workflows across teams

Mechanical Engineer with a B.S. in ME from Drexel University. Experience in product design, specifically in the medical device field as well as pumps and water flow devices.

Mechanical Engineer with a B.S. in ME from Drexel University. Experience in product design, specifically in the medical device field as well as pumps and water flow devices.

Hardworking and reliable Engineer focused on going above and beyond to support the team. Quick learner with good computer abilities. Motivated to continue to learn and grow as an engineering professio... Read more

Hardworking and reliable Engineer focused on going above and beyond to support the team. Quick learner with good computer abilities. Motivated to continue to learn and grow as an engineering professional.

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years profes... Read more

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years professionally. I have some AutoCAD experience as well, but do not use daily. About 4 months into my employment I was assigned a 3.5 million dollar project, which I completed on time, under budget and with no issues. I feel confident in my ability to complete any design challenge that comes my way.

Hello! I am an independent CAD designer based in Philadelphia. My work consists of creating scaled 3D models for jewelry and wearable objects. My most current work is drafting CAD models and drawings... Read more

Hello! I am an independent CAD designer based in Philadelphia. My work consists of creating scaled 3D models for jewelry and wearable objects. My most current work is drafting CAD models and drawings for film production.

Recent graduate from Lehigh Unversity, but moved into teaching high school vocational engineering. Constantly looking for a challenge in design and engineering. I have worked on several projects spann... Read more

Recent graduate from Lehigh Unversity, but moved into teaching high school vocational engineering. Constantly looking for a challenge in design and engineering. I have worked on several projects spanning several disciplines. Below are a few such projects: - An LCD screen readout for my racing simulator rig via USB and background network data. - FIRST Robotics Competition Robots (As a student: 2008-2011; As a mentor: 2013- Present). - Formula SAE Race Car at Lehigh University (X-42, X-43, X-44, X-45). - High school senior project: Electric Go-Kart, 3-D Modeled F1 Car designed to the 2011 Spec rules. - Car sensor for bicycles and motorcycles using ultrasonic sensors.

I actively work to provide custom systems for factory automation. I also have experience with 3d printing.

I actively work to provide custom systems for factory automation. I also have experience with 3d printing.

yes

yes

Army veteran, CAD designer, problem solver. From a lifetime of challenges and experiences, I possess the skills necessary to solve any problem and create any product you can imagine. Main focuses are... Read more

Army veteran, CAD designer, problem solver. From a lifetime of challenges and experiences, I possess the skills necessary to solve any problem and create any product you can imagine. Main focuses are Automotive, Defense, and Drone industries, blending mechanical, electronic, and cutting-edge tech to deliver modern solutions.

I have 10+ years of Solidworks and 3D design experience as well as 4+ years of 3D printing experiences. I work within material molding and die design as well as consulting for medical devices and pers... Read more

I have 10+ years of Solidworks and 3D design experience as well as 4+ years of 3D printing experiences. I work within material molding and die design as well as consulting for medical devices and personal gadgets. I have previously worked in machine and productions shops and I am very familiar with the production process. I look forward to doing work with you. Thanks, Nicholas

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conver... Read more

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conversion, battery power, and audio. I have designed, built, and shipped multiple successful, high and low volume products for retail, industrial, and research markets.

I am a registered architect in the state of Pennsylvania with 8+ years experience in the architecture and design industry. I have extensive drafting and modeling experience working in jurisdictions ar... Read more

I am a registered architect in the state of Pennsylvania with 8+ years experience in the architecture and design industry. I have extensive drafting and modeling experience working in jurisdictions around the United States.

Over 20 years of experience with CAD/D in various industries with a broad understanding of engineering environments. Organized professional augmented by a unique blend of excellent technical, customer... Read more

Over 20 years of experience with CAD/D in various industries with a broad understanding of engineering environments. Organized professional augmented by a unique blend of excellent technical, customer service and hands-on skills. Versed in Adobe Creative Suite: various design & graphics related tools and apps. Stratasys Certified 3D Printer Technician.

I am a 3d Artist, graduated from the Art Institute of Pittsburgh for Game Art and Design. Growing up in Russia I had developed a passion for gaming and games. In America, I had decided that creating g... Read more

I am a 3d Artist, graduated from the Art Institute of Pittsburgh for Game Art and Design. Growing up in Russia I had developed a passion for gaming and games. In America, I had decided that creating games would be my future. Taking my passion for art I went into the art side of development.

I am a Mechanical Engineer by education and I am fascinated with manufacturing and design. I would love to help you bring your design to life!

I am a Mechanical Engineer by education and I am fascinated with manufacturing and design. I would love to help you bring your design to life!

Over 20 years experience working with AutoCAD as a designer, project manager, and AutoCAD team leader. I can help with ANY AutoCAD tasks, tutoring, customization, automation, standards libraries, te... Read more

Over 20 years experience working with AutoCAD as a designer, project manager, and AutoCAD team leader. I can help with ANY AutoCAD tasks, tutoring, customization, automation, standards libraries, templates, etc. Autodesk Revit Certified Professional 2015 Autodesk AutoCAD Certified Professional 2015 Autodesk AutoCAD Certified Professional 2013 I have worked with AutoCAD from release 12 up through the current release of 2018. My background is strong in Architectural and MEP projects, but I have knowledge and skills to be able to complete ANY drafting/design tasks out there.

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you... Read more

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you with your latest project! My background includes modeling for my University's Formula SAE Team, and modifying existing free prosthetic arm models for amputees in need through the eNABLE foundation. I also have experience turning 2D drawings to working 3D CAD Models. Feel free to contact me with any questions or concerns!

I am a candidate who is deeply devoted and motivated to work closely you or your staff, utilizing my skill set and expertise in AutoCAD. I am very confident that I will be able to meet and exceed you... Read more

I am a candidate who is deeply devoted and motivated to work closely you or your staff, utilizing my skill set and expertise in AutoCAD. I am very confident that I will be able to meet and exceed your expectations. Example projects include: PHL International Airport Restroom Rehabilitation PHL International Runway 8-26 Rehabilitation PHL International Natural Gas

I have worked on a variety of projects within the areas of mechanical, civil and electrical disciplines. I have also worked in the facilities engineering department at several companies. I have used A... Read more

I have worked on a variety of projects within the areas of mechanical, civil and electrical disciplines. I have also worked in the facilities engineering department at several companies. I have used AutoCAD and MicroStation for my drafting or design work.