Hire Mechanical Engineer Designers near Texas, United States

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a... Read more

I am a Mechanical Engineer both by education and trade. I have experience in design work and project work. I am familiar with design for assembly and design for manufacture. K.I.S.S. is a principle I live by and I understand that designs should be manufacturable. I have knowledge of and experience with various fabrication processes including but not limited to 3D printing, machining, and welding. My professional certification was given to me by Texas after rigorous testing and peer review. My area of testing was in Machine Design and Materials. I can perform FEA analysis and make sense of the results, allowing me to make good engineering recommendations for a given problem. I have spent the majority of my professional career designing dP (differential pressure) flow meters in accordance to ASME Boiler and Pressure Vessel Code as well as the accompanying ASME B31 series. I am very familiar with reading codes and standards and designing accordingly. This experience has also given me a strong understanding of GD&T. I am a good fit and so are my designs.

I am from Houston, TX! I am currently a student studying Mechanical Engineering. I earned my Drafter's Certificate and have since used it to better my knowledge of the world, work place, and... Read more

I am from Houston, TX! I am currently a student studying Mechanical Engineering. I earned my Drafter's Certificate and have since used it to better my knowledge of the world, work place, and different industries. I have 4+ years Drafting Experience for Structural Steel Building Companies. I also enjoy learning new things!

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to... Read more

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japan when I turned 18, on invitation by Kobun Chino Otogawa to participate in an informal cultural exchange. Lived and worked with Kanjuro Shibata, bow-maker to the emperor, and Zen archery master in Kyoto for about 2 years. Instead of returning to the US as planned, I continued across fascinating Asia for 1 year and then studied and worked in Paris, France for 7 years as a fine artist. Then I returned to California, built on to a cabin and added a studio. Started an art and design studio and contract design service for manufacturers and suppliers to big box retailers for about 10 years. Then I moved to Austin, Texas and worked for Philips Lighting as head designer, (senior manager, R+D) for 11 years, and led a design team. My designs won a number of innovation and design awards and were on the cutting edge of LED lighting, as well as extremely market-successful. In 2017, decided to become an independent designer again, as well as an investor, (instead of moving to Boston to continue my rewarding corporate career with Philips). Since then I have been trading futures and options, and taking on design projects, as well as advising my wife with her startup business. I'll write a book about it when I turn 80 ;-)

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work... Read more

Hello, My background is in sheetmetal design. I've been in the manufacturing industry for 6yrs working with Mechanical Engineers as a mechanical drafter. I can produce multi page assembly and work instruction drawings to represent multipart products and can include single part pieces with DXF files for CNC programming.

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of... Read more

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing 3D models, isometrics, orthographic drawing of piping systems based on the field survey, process and equipment information and technical specifications provided by the customer.

Professional Experience: Weatherford International PLC Huntsville, TX Senior Project Engineer June 2012 - Present Manage projects to ensure that activities are carried out in accordance with... Read more

Professional Experience: Weatherford International PLC Huntsville, TX Senior Project Engineer June 2012 - Present Manage projects to ensure that activities are carried out in accordance with established specifications, schedules, and budgets; coordinate interdepartmental functions in order to minimize delays; meet with project team members on a regular basis to review project status and plan future actions. ● Coordinate the efforts of the functional departments to ensure that projects are conducted in accordance with the Statement of Requirements and budgets; from manufacturing through production. o Reduced time to market threefold by generating efficiency through direct contact between designer and manufacturing, maintaining test schedules while simultaneously updating lab reports. o Consulted with FEA Engineer, Designer, and Machinist to enhance product design while limiting the difficulty of manufacturing the expandable connection product line. ● Interface with internal and external customers on schedules, meetings, and project status. ● Anticipate potential schedule or priority delays and initiate plans for alternative actions. ● Design and monitor manufacturing of product, fixtures and other special equipment for lab operations. o Capehart, Michael B. and Richard W. Delange, Feng Gao, Scott H. Osburn, John Richard Setterberg, Jr. “Expandable Liner.” Patent Application No. PCT/US16/42113, filed July 13, 2016. L3 Communications PID Waco, TX Structural Engineer 2B September 2008 - June 2012 Analyzed interior and exterior aircraft components that were newly designed or modified. Then, conveyed results to the design group to aid in obtaining structurally sound components per customer requirements. ● Performed stress analysis for interior and exterior aircraft components on various aeronautical programs and detailed results in a professional report format. o Performed static stress analysis on the addition of an antenna to the outer skin of aircraft fuselage. o Utilized Finite Element Analysis (FEA) to achieve optimal design for the critical clevis attachment of a 1200+ lbm to the aircraft frame. ● Proactively programmed spreadsheets to generate analysis of common parts and output results into proper report format. ● Coordinated with design groups to update parts according to results of stress analysis. ● Worked with manufacturing, purchasing and test sites to coordinate completion of test samples. o Prepared all component level test plans and report for P1009 (500+ total). o Analyzed effects of large payload attached to critically stressed components of the wingbox. Professional Honors: Engineer-In-Training (EIT 54943) “Expandable Liner”. US Patent Application No. PCT/US16/42113. 2016 July 13 Society of Petroleum Engineering American Society of Mechanical Engineers

Mechanical Engineer with strong passion for machine design and product development design, broad knowledge of CAD software solutions. Proficient with Autodesk Inventor, Fusion 360,Nastran and... Read more

Mechanical Engineer with strong passion for machine design and product development design, broad knowledge of CAD software solutions. Proficient with Autodesk Inventor, Fusion 360,Nastran and Autodesk Revit. Extensive knowledge in systems and machine design. Exploring the generative design technology and the additive manufacturing process to achieve lighter and efficient designs with a integral manufacturing.

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or... Read more

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a complex fixture, I am here to help! - Proficient in Solidworks and Creo Parametric - Full project management from start to finish - Regular communication is critical for success

I am a Mechanical Engineer with over 20 years of Manufacturing Experience and over 8 years of design engineering experience across various Industries such as electrical, automotive, mining, and... Read more

I am a Mechanical Engineer with over 20 years of Manufacturing Experience and over 8 years of design engineering experience across various Industries such as electrical, automotive, mining, and defense. I offer mechanical design and manufacturing solutions leveraging my experience to create tools, fixtures, or products that solve problems and improve customer's situations efficiently and effectively. I started working on the manufacturing floor and worked my way up to become an engineer. With my strong background in manufacturing, I can provide the best recommendation of how the product can and should be manufactured to fit the customer's needs. After finishing my ME degree, I knew design engineering is where I wanted to go. I have worked on new product innovation as well as designing tools and fixtures for new and existing products. I can save the customer time and money by designing the right solution upfront as a new product or improving upon existing designs. My designs have proven to be innovative, out of the box, successful in reducing manufacturing time, improvement in manufacturing process, design for manufacturing. I have my PE license and am ready and eager to help you get your design off the ground.

I am a recent graduate of Southern Methodist University, with a Bachelor's Degree in Mechanical Engineering and Math. In addition to taking CAD Design classes for my degree, I have been using CAD... Read more

I am a recent graduate of Southern Methodist University, with a Bachelor's Degree in Mechanical Engineering and Math. In addition to taking CAD Design classes for my degree, I have been using CAD software since high school.

To be an engineer in the 21st century, to me, means to be at the front lines of creative innovation, selflessness and a holder of technical knowledge. Mechanical engineering has been a way to... Read more

To be an engineer in the 21st century, to me, means to be at the front lines of creative innovation, selflessness and a holder of technical knowledge. Mechanical engineering has been a way to express myself creatively as well as challenge myself technically and intellectually. I have a passion for driving projects to be the best they can be and to ultimately take them to another level above what is the current bench mark. I enjoy working with groups and find group dynamics to serve as a main contributor to a projects future success. I have gained an immense amount of experience through academics, jobs and Internships throughout my college career and am ready to work on some side projects to drive new products to new great heights for ethical, innovative and ambitious reasons.

I have 20 years of experience as a tool and diemaker, mechanical designer, draftsman and CAD/Documentation Manager. I specialize in Mechanical Engineering using AutoCAD and Solidworks to bring... Read more

I have 20 years of experience as a tool and diemaker, mechanical designer, draftsman and CAD/Documentation Manager. I specialize in Mechanical Engineering using AutoCAD and Solidworks to bring ideas to reality. Whether it's the automotive, oil and gas, aerospace or fiber optic industry let me help your company reach it's highest potential. Whether it's 2D to 3D conversion, detail drawings, assemblies, bill of materials, design consulting or just large format scanning, I help you meet your goals.

I am a Texas based Mechanical Engineer. I am dedicated to using engineering to help others design their dreams. My one man company Empowered Engineering Solutions specializes in product design and... Read more

I am a Texas based Mechanical Engineer. I am dedicated to using engineering to help others design their dreams. My one man company Empowered Engineering Solutions specializes in product design and development by providing 2D/3D modeling and CAD requirements efficiently. EES prides itself on meeting your technical needs with great service.

I am a full time Mechanical Engineering student at the University of Texas at Tyler. I came to cad crowd to use my experience in 2D/3D modeling software to gain resume building work experience. Read more

I am a full time Mechanical Engineering student at the University of Texas at Tyler. I came to cad crowd to use my experience in 2D/3D modeling software to gain resume building work experience.

Motivated, personable, technical professional, with 10 years experience in product development from conception through final manufacturing and retail sale. • Expert user of CAD programs and... Read more

Motivated, personable, technical professional, with 10 years experience in product development from conception through final manufacturing and retail sale. • Expert user of CAD programs and skilled producer of mechanical engineering documentation and drawings. • Design for Manufacturing, Design for Assembly, Design for High Volume • Sheet Metal Design, Automation/Kinematic Design, Retail Product Design • Injection molding part design, including parting line/draft analysis to ensure part can be manufactured. • Proven ability to make significant technical, scientific advances utilizing internal and/or external resources.

I am a full time Mechanical Engineer that has had 2 years of SolidWorks modeling experience with large assemblies, FEA, and professional drawings. I have used Pro-E in the past, but my expertise is... Read more

I am a full time Mechanical Engineer that has had 2 years of SolidWorks modeling experience with large assemblies, FEA, and professional drawings. I have used Pro-E in the past, but my expertise is in SolidWorks.

Mechanical engineering student with AutoCAD and Inventor experience Read more

Mechanical engineering student with AutoCAD and Inventor experience

Mechanical Engineer, with 7 years of experience on Autodesk Inventor, Solidworks, Ansys (AWQA, Fluent, CFD, Mechanics). Read more

Mechanical Engineer, with 7 years of experience on Autodesk Inventor, Solidworks, Ansys (AWQA, Fluent, CFD, Mechanics).

A broad range expertise acquired over a period of 25 years of work related to Mechanical Engineering. I have a passion to design by funneling innovative ideas. It all begins with a stroke of the... Read more

A broad range expertise acquired over a period of 25 years of work related to Mechanical Engineering. I have a passion to design by funneling innovative ideas. It all begins with a stroke of the pencil to paper... love to freehand sketch and visualize the design concept before taking it to the next level. Proficient with 3D modelling using different CAD software. My creative mind and passion for design has taken a new meaning... I now own a 3D printer. The best thing that I did to forge a path into the various design and manufacturing activities that I was able to get involved in... its been a fantastic experience. No stopping or slowing down.... 3D printing is a huge technological advancement and am excited to be a part of it. Would love to work on your next project and help you and your team build a better product.

I have been employed in aviation since the age of 18, I have experience as a mechanic, assembler, avionics technician, mechanical engineer/designer of structural modifications and VIP interior... Read more

I have been employed in aviation since the age of 18, I have experience as a mechanic, assembler, avionics technician, mechanical engineer/designer of structural modifications and VIP interior monuments.

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater... Read more

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater treatment, marine, automotive, machining, process piping, building & structural design.

I am a Graduate Student at the University of Texas at Arlington with Mechanical Engineering my Major. My experiences and my motto of seiri, seiton, seiso, seiketsu, and shitsuke which means sort,... Read more

I am a Graduate Student at the University of Texas at Arlington with Mechanical Engineering my Major. My experiences and my motto of seiri, seiton, seiso, seiketsu, and shitsuke which means sort, set in order, shine, standardize and sustain make me a strong candidate .

Mechanical engineer with experience in machine tool design, prototyping, 3D printing, and drone applications . Read more

Mechanical engineer with experience in machine tool design, prototyping, 3D printing, and drone applications .

Mechanical Engineer with five years experience working as a lead mechanical designer for advanced electronic assemblies and machined parts. Primary experience in PTC Creo and Windchill. Capable of... Read more

Mechanical Engineer with five years experience working as a lead mechanical designer for advanced electronic assemblies and machined parts. Primary experience in PTC Creo and Windchill. Capable of GD&T definition according to ASME Y14.5 and tolerance analysis.

Mechanical Engineer with great innovative ideas and design skills Read more

Mechanical Engineer with great innovative ideas and design skills

Master's of Science Mechanical Engineering, University of Houston, May 2020 Bachelor's of Science Mechanical Engineering, University of Houston, May 2019 Suspension System Modeler and Analyzer... Read more

Master's of Science Mechanical Engineering, University of Houston, May 2020 Bachelor's of Science Mechanical Engineering, University of Houston, May 2019 Suspension System Modeler and Analyzer for University of Houston Formula Society of Automotive Engineers

Over 10+ years of CAD experience. B.S. in Mechanical Engineering Fast, Accurate, and Innovative. Great attention to detail. Read more

Over 10+ years of CAD experience. B.S. in Mechanical Engineering Fast, Accurate, and Innovative. Great attention to detail.