Ring Mouse Charging DockBlind

in Electronic Devices held by Josephan
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Share
Description:
Inviting concept design for a charging cradle for a ring mouse. AirPoint mouse is a finger-wearable bluetooth ring mouse. A user can slide the finger across a surface to get mouse cursor movement. It can also be used as an air mouse by moving finger in space. After use, this device needs to be docked in a charging cradle to recharge the battery and also for safe storage. Seeking designs for a charging dock for this device.

See the attached picture and stp file for the reference dimension of the finger-wearable unit.

Note that the finger-wearable unit has a magnetic connector that attaches to a magnetic connector in the charging PCB board.
Wants:
1) Sleek, elegant, and futuristic design.
2) Docks the finger-wearable unit at a 45 degree angle to facilitate easy docking and removal.
3) USB-C charging opening on one of the sides of the cover.
4) Magnetic bottom cover to latch to classroom whiteboards or table desk.
5) Top Cover that securely lock away the finger-wearable device.
7) Easy to carry around for traveling.
8) Easily accessible chamber to install two AAA batteries
9) An inside chamber for PCB board invisible to the user with a minimum dimensions of 30 mm X 30 mm X 2 mm ( L X W X H).
10) Aesthetically pleasing renderings of the model.
Don't Wants:
Bulky design.
Not friendly to carry around.
No secure fit for the finger-wearable device.
Ask for Sample:
Finish one design as a sample. Post pictures of renderings for review.
Software:
  1. SolidWorks (Latest)
Additional Information
For videos and additional details about the ring mouse please visit:
magnima.com/products/airpoint-mouse/
Post Similar Contest
Prepaid Prize Prepaid Prize
  • Prize #1: Under $799
  • Prize #2: Under $799
  • Prize #3: Under $799
  • Prize #4: Under $799
  • Prize #5: Under $799
Project Info
  • Created: Sun, 02 Feb 2020 10:10:52 +0000
  • Ended: Mon, 17 Feb 2020 10:10:52 +0000
  • Entries: 77
  • Designers: 30
Report Contest
Attachments

Entries

= Buyer's Rating
#44 Ring Mouse Charging Dock by Eira
Download Files
Feb 16, 2020 19:48
#31 Ring Mouse Charging Dock by REDA
Download Files
Feb 14, 2020 22:00
#33 Charging dock by STRAK_design
Download Files
Feb 15, 2020 1:38
#34 Charging dock by STRAK_design
Download Files
Feb 15, 2020 2:10
#40 Magnima Ring Mouse Charging Dock by gb_renders
Download Files
Feb 15, 2020 20:41
#37 Ring Mouse Charging Dock by Eira
Download Files
Feb 15, 2020 13:29
#15 First Design - Sectional by ahmadnazree
Download Files
Feb 12, 2020 8:03
#4 Ring Mouse Charging Dox by Chase R.
Download Files
Feb 6, 2020 10:25
#5 Ring Mouse charger by Svavis
Declined
Download Files
Feb 6, 2020 13:45
#8 Ring Mouse Charging Dock by REDA
Download Files
Feb 7, 2020 22:49
#77 Mouse Charging Dock by Aj Designs
Download Files
Feb 17, 2020 10:10
#18 Charger 3 by Jim81
Download Files
Feb 12, 2020 23:57
#1 Charging system by Adnanarif
Declined
Download Files
Feb 3, 2020 3:19
#11 Charger by Jim81
Download Files
Feb 10, 2020 16:41
#62 Charging dock by STRAK_design
Download Files
Feb 17, 2020 5:57
#61 Ring Mouse Charging Dock by REDA
Download Files
Feb 17, 2020 2:38
#54 Ring Mouse Charging Dock by Fadi Sayegh
Download Files
Feb 17, 2020 0:00

Discussion

Showing last 20 comments - View All

Josephan

Buyer

Tue, 18 Feb 2020 03:34:46 +0000
Dear Designers,
Thank you for your overwhelming participation in this contest. We&;ve received excellent designs. We will announce the winners soon. Thanks again for your commitment and effort.
Sincerely,
Josephan

Sava

Mon, 17 Feb 2020 22:01:05 +0000
Yea, I like that! Five awards! Looks very nice.

REDA

Designer

Mon, 17 Feb 2020 11:57:02 +0000
Good luck to all My Best design 6 Stars hihi💗

Josephan

Buyer

Mon, 17 Feb 2020 02:44:42 +0000
Dear Designers,
Thank you for your overwhelming participation in this design contest. We&;ve received excellent design entries and added 2nd, 3rd, 4th and 5th prizes to honor the time and effort you have put in creating the submissions. Kindly note that we deeply value your time and commitment and if your design is not selected please don&;t feel disappointed. Thanks again.
Sincerely,
Joseph

REDA

Designer

Sat, 15 Feb 2020 16:25:51 +0000
Hi,

💗

REDA

Designer

Sat, 15 Feb 2020 16:25:48 +0000
Hi,

💗

Josephan

Buyer

Thu, 13 Feb 2020 03:15:52 +0000
Dear Reda,
This is our first time using this platform. Was worried that rating design will adversely affect the designer&;s online profile. We will review and rate.

REDA

Designer

Tue, 11 Feb 2020 09:21:02 +0000
could you rate the work,please ;)
to know if we should continue other designs or not.
if you don&;t rate, we can&;t know if our design is accepted or not.
and then it&;s good for the effort made
Regards
REDA

Josephan

Buyer

Tue, 11 Feb 2020 05:00:06 +0000
Hi Martin Arguello,
We need to keep the PCB with magnetic connector at an angle 45 degree with the ring mouse for easy docking.

Josephan

Buyer

Tue, 11 Feb 2020 04:45:09 +0000
Hi coldmonk,
Bottom cover of charging dock need to latch magnetic surfaces, explore more about magnetic covers and try.

Martin Arguello

Designer

Mon, 10 Feb 2020 19:58:09 +0000
Hi Josephan,
In what way has the PCB board to be aligned with the ring mouse?

coldmonk

Mon, 10 Feb 2020 18:13:24 +0000
Hey, could you explain what you mean by magnetic bottom cover to latch to various surfaces? Some more information on how that&;ll work will be appreciated. Thanks

REDA

Designer

Sun, 09 Feb 2020 00:19:22 +0000
Thanks

Josephan

Buyer

Thu, 06 Feb 2020 10:18:04 +0000
Hi,
Contest open for all. You can also participate.

REDA

Designer

Thu, 06 Feb 2020 08:42:28 +0000
Hi,
Nice !
I want to participate in this Contest ;)

Abdul Malik

Mon, 03 Feb 2020 12:16:15 +0000
I will do 200$

Abdul Malik

Mon, 03 Feb 2020 12:15:03 +0000
I will do

Josephan

Buyer

Mon, 03 Feb 2020 01:53:01 +0000
Hi,
Step files would be fine or AutoCad files.

LickuidCAD

Mon, 03 Feb 2020 01:36:57 +0000
Hello Josephan,

Is solidwords the only acceptable file format?

Josephan

Buyer

Sun, 02 Feb 2020 16:29:08 +0000
Hi Albertus,
Yes, the website you found is correct. Thanks for the tip. I will include the link in the description.

Similar Contests on Cad Crowd

Design 2018's best selling adult product
We are a manufacture in the adult market, specialising in creating new and unique product collections for our branded customers. Because of the new acceptance of our products, we are looking for some new and unique idea's to launch for the mainstream market. They are still used by adults for adult reasons, but with a 2018 design lead feel. I would like you to design a new product, a Rabbit, or a vibe, handheld personal massager, couples love ring...
Elite Smartphones
Hi, i'm Wood from Elite. I would like to find some good designer with the purpose to designed for me at least 4 new smartphone model design. I'm working on that to launch my brand very soon. Just let me know
Gridseed Scrypt ASIC Mining Frame - Acrylic Waterjet & CNC
Howdy! Let's do something futuristic. Cryptocurrency mining, heard of it? There's specialty computer hardware used to hash mathematical algorithms in a distributed network to generate digital money! This project is to build a frame to sexily mount 10 of these specialty computers to in hopes of cleaning up some messy mining rigs out there. Speaking of messy rigs, here's a video of some good and some bad examples of the Gridseed ASIC miners. http://www.youtube.com/watch?v=Wcb8VIheP94 In the attached image TheDrawingBoard.jpg you'll see some ideas but I welcome your own input if you believe you've got something that equals win. Ask questions, let's do this!
Mini-ITX Computer Case
Hi Everyone! This contest is for the smallest Mini-ITX computer case with the following requirements: -Includes rendering of a mini-itx motherboard -Includes rendering of two nvidia 1080 video card in sli configuration -Enough room for liquid cooling on cpu and video cards including radiator fan(internal or external). -Includes rendering of 800watt SFX-L PSU
Mobile charging ecosystem - Custom Connector Design - iPhone cases and accessories.
SEEKING DESIGNERS WORKING WITH CREO PTC ONLY: We are looking for CREO CAD engineers with a good flair for style. We are in the midst of DFM with our manufacturing partner in Korea who uses CREO. We have many products to develop and seeking freelancers in the Los Angles area who we can not only work with but also meet from time to time. We are also open for long distance if we can't find them locally. Please excuse us for not sharing any project files yet as the initial project will be centered around revision of a proprietary DC-DC magnetic connector for use in mobile device accessories. We can upload them once we establish some contacts with potential freelancers. Thank you for your understanding