Hire the best freelance Autodesk Inventor expert designers for your company

Mechanical engineer who continually demonstrates effective problem solving and delivers creative solutions. Values trust, communication, and work ethic. Has industry experience designing and launching... Read more

Mechanical engineer who continually demonstrates effective problem solving and delivers creative solutions. Values trust, communication, and work ethic. Has industry experience designing and launching new commercial products, and prototyping those designs. Focused on working with early product development projects. Completed projects include: - Flying Turbine Concept: Concept of a floating wind turbine which takes advantage of the high altitude wind speeds. This optimizes the efficiency of the turbine to generate power at lower costs. - Product Improvement (Glue Gun Holder): A redesign project of a popular consumer product which was receiving bad reviews. The poor performance and failure modes were analyzed, and the product was redesigned to perform better. - Water Purification in HVAC System: A new device used to separate rust from flowing water. This was done to avoid the malfunction of modern magnetic pumps, which was due to rust build up at the pump. Don't hesitate to contact me if you have any questions!

I am an Industrial Designer graduated from the University since 2019. I have over 5 years of experience working in design. An industrial designer is dedicated to effectively representing the design ne... Read more

I am an Industrial Designer graduated from the University since 2019. I have over 5 years of experience working in design. An industrial designer is dedicated to effectively representing the design needed by their client, whether it's a product, a space, a sign, or a vehicle. I am hardworking and organized, constantly learning new ways to be more efficient in my work. I frequently use Adobe Illustrator, Photoshop, 3ds Max, KeyShot, ZBrush, Inventor, and Lumion.

I am an undergraduate mechanical engineer with hands-on experience in 3D modeling, simulation, and design. Proficient in industry-standard software like SolidWorks, Autodesk Inventor, and Fusion 360,... Read more

I am an undergraduate mechanical engineer with hands-on experience in 3D modeling, simulation, and design. Proficient in industry-standard software like SolidWorks, Autodesk Inventor, and Fusion 360, I offer a range of engineering solutions, from 3D part design to complex assemblies and sheet metal projects. What I Offer: 3D Part Design: Create detailed, accurate 3D models ready for manufacturing. Assembly Design: Design and optimize assemblies with a focus on functionality and efficiency. Sheet Metal Design: Specialized in sheet metal component design, including accurate unfolding and development. Simulation: Perform FEA and stress analysis to validate design performance before manufacturing. Technical Drawings: Deliver detailed 2D drawings and documentation that align with manufacturing standards. I am passionate about turning ideas into precise and functional designs. Whether you're looking for prototyping, product design, or technical drawings, I can help bring your vision to life. Let’s connect and discuss how I can contribute to your next project!

About Mechanical Engineering: Welcome. My name is Lukasz Kaminski and I have been the owner of Mechanical Engineering for over a year. I am an engineer with seven years of experience specializing in t... Read more

About Mechanical Engineering: Welcome. My name is Lukasz Kaminski and I have been the owner of Mechanical Engineering for over a year. I am an engineer with seven years of experience specializing in technology and construction. My company designs and sometimes manufactures machines and production equipment for various industries through manufacturing companies. My specialty is the design of machines and devices as well as entire production lines and production equipment: welding and assembly instruments, machining brackets, multi-stroke dies/dies. I approach each project individually through an initial conversation with the client. My services are used by both individual customers and production companies. My priority is the safety of using the machines I design and adapting them to the standards and regulations in force in the European Union. In the process of constructing new equipment, I carry out in detail risk assessment and validation with applicable EU standards and directives, which are mandatory when granting the CE mark to new devices. I invite to cooperation individual clients and enterprises to whom I offer: • 3D design in modern CAD environments, • Development of complete designs of machines and devices, technological equipment and production lines in order to implement them into production, • Modification and modernization of existing structures, • Technical support during the development of prototypes of machines and devices, • Design assistance during the implementation of large and complex construction orders, • Creation of construction documentation of machines, parts and subassemblies, which includes: assembly drawings, assembly drawings, manufacturing drawings, drawings of semi-finished products for laser cutting, • Creating technical documentation for patent purposes or obtaining EU subsidies, • FEM strength calculations with preparation of reports.

Experienced Mechanical Design Engineer with a demonstrated history of working in Mega projects in infrastructure design . Skilled in P&ID , Pipe sizing ,selection, 3D Modelling , Microsoft Word, Compu... Read more

Experienced Mechanical Design Engineer with a demonstrated history of working in Mega projects in infrastructure design . Skilled in P&ID , Pipe sizing ,selection, 3D Modelling , Microsoft Word, Computer-Aided Design (CAD), Revit MEP, and Drawing. Strong engineering professional with a B.SC focused in Mechanical engineering from Higher Technological Institute

3D modeling and design

3D modeling and design

I am a Mechanical Engineer specialized in Mechanical system design and manufacturing, most of my project are in the machinery design for various applications, such as agriculture and construction plan... Read more

I am a Mechanical Engineer specialized in Mechanical system design and manufacturing, most of my project are in the machinery design for various applications, such as agriculture and construction plant. I took formal education in the Mechanical Engineering department of Universitas Gadjah Mada and King Abdul Aziz University.

Talented on 3D and Graphic Design field with freelance experience since 2017 and Internship experience on train manufacture industry on 2019. Skilled in Product Design, Presentation, Task and Time Man... Read more

Talented on 3D and Graphic Design field with freelance experience since 2017 and Internship experience on train manufacture industry on 2019. Skilled in Product Design, Presentation, Task and Time Management and also Teamwork.

Ten year combined experience as Mechanical Designer / Engineer working with success in complex product design (Casting, Plastic mold and machined components), and mechanical system projects such as in... Read more

Ten year combined experience as Mechanical Designer / Engineer working with success in complex product design (Casting, Plastic mold and machined components), and mechanical system projects such as inspection machines, fixtures and tooling. In depth understanding of drafting standards (Both ASME and ISO) expert in the application of Geometric Dimensioning and Tolerancing.

I have team of 5 more then +18 years experience within the following aspects of the Onshore Engineering sector: www.wellheadtechnology.com - Pipeline - Riser - Manifold - Unions - Xmas Tree/Chris... Read more

I have team of 5 more then +18 years experience within the following aspects of the Onshore Engineering sector: www.wellheadtechnology.com - Pipeline - Riser - Manifold - Unions - Xmas Tree/Christmas Tree/X-Tree - ROV/Remotely Operated Valves (Actuator) - Vessels - Intervention Tooling - Wellheads -- Dynamic Engineers with 12 Years in-depth experience in the field of design and development, project execution, Research, Technical support. Project Design Experience of Valves i.e. Control valves & automations, check valves & Gate valves etc. Oil field drilling equipment like Diverter system, manifolds, Spools, adapters and special fittings. Strong knowledge base and concepts clarity. Detail oriented with earnest to delve deep in the topic to evolve plausible solutions. Armed with Experience of making Company Standards & Procedures and record keeping of Master and control files. Also hands on experience of designing the work flow start from RFQ stage to the final release of design data package into the PLM system Exposure to API6A/16A/16C, ASME, ASTM, IEC, ISA, NORSOK, NACE MR0175/ISO 15156 standers. Proven capabilities to propose sound design proposals in short cycle time. Proficient in working in harmony with diverse, multi-Disciplinary teams to realize desired objectives Ability to understand the functional requirements and project design documents.

I have designed various machinery including road tankers, generating sets, pumps, compressors, hydraulic mechanical handling equipment, lifting gear and even a battery powered mobile hoist for Torness... Read more

I have designed various machinery including road tankers, generating sets, pumps, compressors, hydraulic mechanical handling equipment, lifting gear and even a battery powered mobile hoist for Torness Nuclear power station. I have received industrial training in the UK from National Grid, the Lifting Equipment Engineers Association (LEEA) and the National Fluid Power Centre (NFPC). I am an expert with Inventor, and in recent years have also become competent with Fusion 360 and Solidworks. CAD software is so good nowadays, that it is quite easy to model something. Where I have proven to be outstanding is with my application of mechanical design analysis and enough experience to know how to apply theoretical methods to reality and what works. Where necessary I can present comprehensive design substantiation e.g. to meet design standards such as BS / ISO or machinery directive and obtain CE / UKCA marking. I am expert with MathCAD and Excel for producing and presenting calculations that have held up to scrutiny. Where appropriate I will produce FEA with Inventor and ANSYS for stress analysis of more complex geometry and loading situations. During my Postgraduate Diploma in Engineering (later incorporated to MSc), I studied the numerical methods involved in FEA, and this combined with experience in aftermarket looking at part failure with Howden Process Compressors, now informs how I use these tools and allows me to use FEA effectively and realistically. I have solid understanding of key manufacturing processes including machining, fabrication, welding, and fitting, having always worked closely with the shop floor, soaking up knowledge and enjoying the camaraderie. I am interested in innovative technology and in recent years I have produced successful designs for mechanical components made by 3d printing of plastic. I have extensive knowledge of industrial components and suppliers and have often saved the time and expense of design and manufacture by knowing of an appropriate off-the-shelf part. In summary, with many years of industrial mechanical design experience, and being a generally trustworthy and conscientious person, taking pride in what I do, I represent exceptional value for money and a choice that you will not regret

Mechanical Engineering Technologist looking to get into the freelance market. Detail oriented and self motivated. Looking to take you details from design to deliverable as soon as possible.

Mechanical Engineering Technologist looking to get into the freelance market. Detail oriented and self motivated. Looking to take you details from design to deliverable as soon as possible.

Skilled Mechanical Engineer with 9 years of experience in Product Design and Manufacturing, proficient in developing and testing mechanical equipment, and creating detailed 3D designs and drawings usi... Read more

Skilled Mechanical Engineer with 9 years of experience in Product Design and Manufacturing, proficient in developing and testing mechanical equipment, and creating detailed 3D designs and drawings using Autodesk Inventor. Thrives on challenges and is passionate about problem-solving, consistently seeking innovative ways to enhance product functionality and efficiency.

With over 16 years of experience in mass transport manufacturing, I possess a strong understanding of safety standards and requirements for producing reliable products. I excel in project planning, ma... Read more

With over 16 years of experience in mass transport manufacturing, I possess a strong understanding of safety standards and requirements for producing reliable products. I excel in project planning, management, and execution, ensuring on-time and within-budget delivery. My adaptability is evident in my work across various industries, including electronic equipment design, site decommissioning, and plant equipment design. As a Self-Employed/Contract Engineer, I specialise in designing bespoke mass transport products like toilet cabins and seating. Notably, I have contributed to the successful development of rail passenger seat products, focusing on comfort, features, and low weight. My expertise covers mechanical and electrical systems, encompassing elements such as reading lights, USB ports, and mains sockets. Throughout my career, I have held positions such as Engineering Project Lead, Senior Design Engineer, and Systems Manager & Engineering Manager. I am experienced in managing projects, delivering prototypes on time and within budget, and continuously improving product designs. With a focus on composite materials, sheet metal, and cast aluminium, I ensure compliance with industry standards like EN 45545, PRM-TSI, and GM/RT2100. As a member of the Institution of Engineering and Technology, I prioritise professional development and staying abreast of industry advancements.

Motivated and detail-oriented Mechanical Design Engineer with One year of hands-on experience in CAD software and mechanical design principles. Proficient in AutoCAD, Creo, Autodesk Inventor, Solid Wo... Read more

Motivated and detail-oriented Mechanical Design Engineer with One year of hands-on experience in CAD software and mechanical design principles. Proficient in AutoCAD, Creo, Autodesk Inventor, Solid Works, and Solid Edge, with a strong foundation in engineering fundamentals. Demonstrated ability to solve complex problems, optimize designs, and collaborate effectively within multidisciplinary teams. Committed to continuous learning and staying updated on industry trends. Seeking opportunities to leverage skills and contribute to innovative projects in mechanical engineering.

Wahyu novianto, 23 years old, lives in the city of Tangerang and is a student at Pamulang University majoring in Informatics. I was born in Tangerang on November 2, 1996. In addition to having the... Read more

Wahyu novianto, 23 years old, lives in the city of Tangerang and is a student at Pamulang University majoring in Informatics. I was born in Tangerang on November 2, 1996. In addition to having the skills to make application programs, I am also proficient in designing 2D & 3D because I graduated from SMKN 4 Kota Tangerang majoring in mechanical drawing engineering, I am also a provincial job training skill in CAD / CAM and I have also participated in the ASEAN Skill Competition.

I am a mechanical engineer with more than ten years of experience in the field. (You can see my portfolio below). In the last 14 years, I've been designing different types of machines, parts, and asse... Read more

I am a mechanical engineer with more than ten years of experience in the field. (You can see my portfolio below). In the last 14 years, I've been designing different types of machines, parts, and assemblies. Additionally, I have "hands-on" experience assembling those designs in real life. I am an expert in Autodesk Inventor modeling and have experience working in Solidworks. I'm strongly familiar with different manufacturing technologies and know how to prepare blueprints from preliminary design up to full- detail design, including plans for welders, CNC, lathe, and more. I read, write, and speak Ukrainian, Russian, and English. For the last 5 years, before the war came to my home country, I had been building my own fish cannery. In addition to my engineering design skills, I know computer programming at a level that was sufficient to launch an e- commerce business that has been working for the last 6 years (www.tushe.od.ua). I'm a self-taught individual, and I have no issue learning new technical skills and am not afraid of new challenges. Skills • Mechanical Engineering, Product Development, Machines and Parts Assemblies (14 years of experience. Portfolio available below). • Autodesk Inventor (18 years of experience; first version used was Autodesk Inventor 9.0, 2005). • SolidWorks (2 years of experience). • 3-axis CNC milling machine operation (Some experience in creating G-codes and milling parts from steel, aluminum, plastic, and wood). • Manual Lathe and Milling Machines (Some experience). • TIG and MIG welding (5 years of experience). • JavaScript, CSS, SQL, PHP (Basic/Moderate. In 2019, created an online store from scratch for my brand of canned food "Tushe" at www.tushe.od.ua). • Adobe Photoshop, Illustrator (Created designs for my brand "Tushe"). • Microsoft Project (Some experience). • Other Skills (Food Machinery, Sheet Metal Fabrication, Electrical Design, Conveyor Systems, 2D Drawings, Hand Tools, Burning Torch, Prototyping, Plumbing, Air and Water Piping Systems).

I am a dedicated and skilled Indian trained CAD specialist with over 16 years of experience with Autodesk inventor and 3 years with Fusion 360. Customer satisfaction and quality is my top priority.... Read more

I am a dedicated and skilled Indian trained CAD specialist with over 16 years of experience with Autodesk inventor and 3 years with Fusion 360. Customer satisfaction and quality is my top priority. Services I offer: + Parametric 3D Part Design + iLogic Projects + 2D image + Professional rendering + Professional animation and dynamic simulation + Bringing me to know about materials and production processes my background: + More than 10 years in Indian pharmaceutical machine manufacturing industry + Working for high profile clients such as Kevin Process Technologies Pvt. Ltd. And ADCC Infocad Ltd. + Design Consultant in VCAD Solutions Designing products for various start-ups

As a skilled mechanical design engineer with expertise in CAD and drafting, I bring a wealth of experience in creating innovative solutions for complex engineering challenges. With a proven track reco... Read more

As a skilled mechanical design engineer with expertise in CAD and drafting, I bring a wealth of experience in creating innovative solutions for complex engineering challenges. With a proven track record in delivering successful projects and a strong educational background in mechanical engineering, I possess a keen eye for detail and a deep understanding of design principles. My strengths include proficiency in SolidWorks and other CAD software, strong analytical and problem-solving skills, and a commitment to delivering high-quality results on time and within budget. From conceptualization to finalization, I have a keen ability to bring ideas to life through meticulous drafting and precise engineering. With a passion for excellence and a dedication to continuous improvement, I am well-equipped to contribute to your team's success.

I'm a mechanical design engineer & Certified SolidWorks Expert (CSWE). I've more than 5 years experience in Engineering, Design, Product Development, Prototyping & 3D Printing & Manufacturing process.... Read more

I'm a mechanical design engineer & Certified SolidWorks Expert (CSWE). I've more than 5 years experience in Engineering, Design, Product Development, Prototyping & 3D Printing & Manufacturing process. I've completed my Bachelor degree in Mechanical Engineering from Khulna University of Engineering & Technology (KUET). Currently, I'm working as Design Engineer at Pran-RFL Group. I'm honest, hardworking, energetic & sincere in my work. My communication skill is good enough. I can take different types of stress. As a whole, I enjoy simple living.

Organized, detail-oriented, dedicated student of physics with experience in mechanics, and a passion for optics. Experience modeling, fabricating, and creating drawings for components with tight toler... Read more

Organized, detail-oriented, dedicated student of physics with experience in mechanics, and a passion for optics. Experience modeling, fabricating, and creating drawings for components with tight tolerances alongside those of colleagues as parts in a larger design.

I’m a Mechatronic Engineer with 5+ years of experience in 3D design using Fusion 360 and Inventor. I specialize in design for manufacturing, 3D prototyping, and end-to-end product development. With ha... Read more

I’m a Mechatronic Engineer with 5+ years of experience in 3D design using Fusion 360 and Inventor. I specialize in design for manufacturing, 3D prototyping, and end-to-end product development. With hands-on experience from years of building functional parts for home and agricultural applications, I understand how to design for real-world use—especially in tough environments. I own and operate 3D printers for rapid prototyping and bring a strong background in electronics, including PCB and embedded system design. My solutions are always optimized for practical assembly, reliability, and cost-efficiency. My experience spans agricultural tools, mechanical assemblies, and consumer gadgets. I'm flexible, deadline-driven, and available for voice or video calls. Let’s turn your idea into a manufacturable reality.

Freelance Industrial & Product Designer - 3D Modeling - Rendering www.mu-industrialdesign.com

Freelance Industrial & Product Designer - 3D Modeling - Rendering www.mu-industrialdesign.com

I am a mechanical engineer and CAD/CAM, modelling and rendering expert who has full experiences in mechanical and architectural engineering. I graduated from Moscow University with first place in 201... Read more

I am a mechanical engineer and CAD/CAM, modelling and rendering expert who has full experiences in mechanical and architectural engineering. I graduated from Moscow University with first place in 2014. After graduation, I am working as a mechanical and architectural design engineer.

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both... Read more

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both large and small projects. I am proficient in the development of light engineering units, various metal structures, sheet metal products, furniture, and have good knowledge of metal working methods. My skill set includes: 3D Design, rendering, drawings, and vector files. I also offer production support in the following areas: 1 - various metal structures including sheet metal structures 2 - equipment for machine tools of metal working 3 - conveyor equipment 4 - loft style furniture 5 - any type of CAD converting 6 - rendering

I am a Manufacturing Engineer with Engineering design as my special skill. I have 8 years of experience and have achieved a lot of achievements in those skills. As an Engineering Designer, I professio... Read more

I am a Manufacturing Engineer with Engineering design as my special skill. I have 8 years of experience and have achieved a lot of achievements in those skills. As an Engineering Designer, I professionally produce the following projects as: 1. 3D Modelling (Standard - Expert Modelling) 2. 3D Modelling from 3D Scanner Data (Mesh Data)) 3. 3D Assembly Modelling 4. 3D Exploded Modelling 5. Engineering Drawing for Manufacturer (GD&T, Welding Symbol) 6. Render Animation Engineering Simulation 7. Rendering Realistic Image. Create an engineering drawing according to the ISO Standard and put it through Engineering Drawing. I'm working with Autodesk Inventor Professional, Autodesk AutoCAD 2D & 3D, Solidworks, Siemens Solid Edge, and NX CAD/CAM. As a Manufacturing Engineer College, what I learned are : 1. Material Science 2. Fluid Mechanics 3. Engineering Mechanics 4. Manufacturing Process (Sheet Metal Fabrication, Injection Plastic, Welding, Machining, and Sand Casting Process) (Theory and Practice) 5. Material Strength 6. Production Planning 7. Automation (Programming and Practice) 8. Pneumatics and Hydraulics (Programming and Practice) 9. Occupational Health and Safety 10. Engine/Machine Element 11. Jig and Fixture Design 12. Industry Statistics 13. Industry Layout Modelling and Facility Planning 14. Choosing Material and Process 15. Maintenance (Theory and Practice) 16. Supervisor/Supervision Techniques 17. Internship