Hire the best freelance Bentley AutoPIPE expert designers for your company

Team available for any kind of engineering job Read more

Team available for any kind of engineering job

- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy... Read more

- Graduated from the University of Waterloo with honors in 2006 - 11 years of experience as a mechanical engineer - Experienced with Solid Edge, Solid Works, AutoPipe, AutoCAD, Fluid Flow 3, Energy Plus - Experienced with designing piping systems, cooling water systems, HVAC, compressed air systems, tanks, furnaces, copper cooling blocks for furnaces, off-gas treatment systems, hoods, leak detection systems

Piping / Pipe Supports / Piping Stress Analysis Total 20+ years’ experience where 15+ years as piping stress analysis engineer including pipe support engineering and 5 years experience as piping eng... Read more

Piping / Pipe Supports / Piping Stress Analysis Total 20+ years’ experience where 15+ years as piping stress analysis engineer including pipe support engineering and 5 years experience as piping engineer in offshore and onshore of oil & gas / petrochemical industries as well as power plants. - Knowledge of NOKSOK and DNV standards - Expert in Stress analysis software - Caesar-II 2014 / 2016, Autopipe, Triflex - Expert in Pipe support engineering, 3D modelling, Design, Checking - Expert in Piping layout and materials - Finite Element software: Ansys 14.0 - 3D modelling: PDMS, Inventor, Solid works, - 2D Drafting: Autocad 2014 - Pressure vessel design using PV Elite - Analyze / approve piping stress calculation for any critical lines - Prepare stress calculation reports for third party verification and it’s checking. - Prepare isometrics / GA / stress iso using Microstation and Autocad. - Experience in use of ASME Codes B31.1, B31.3, B31.4, B31.8, VIII –Div.1 & 2, API standards,NORSOK, HS&E, DNV, PED, PD5500, EN 13480, EN 13445 etc.

Piping Engineer with 11 of experience in piping design, stress analysis, pipe support, piping inspection.Have worked for oil and gas, power and process industry Read more

Piping Engineer with 11 of experience in piping design, stress analysis, pipe support, piping inspection.Have worked for oil and gas, power and process industry

I am a graduate Mechanical Engineer, pro-active & multi-skilled professional extending rich corporate experience of 7 years in Mechanical & Structural Designs,Pipeline Engineering, Asset integrity & C... Read more

I am a graduate Mechanical Engineer, pro-active & multi-skilled professional extending rich corporate experience of 7 years in Mechanical & Structural Designs,Pipeline Engineering, Asset integrity & Condition Monitoring ,Risk-Based Inspection, Non-Destructive Examination & Evaluation, Corrosion Engineering in oil/gas, Petrochemical, and power/process industries.

Play in nature is a very useful thing to release tired. When I was child, I like walking along fields behind houses also in my school I often walk behind the hostel which is directly passed of mountai... Read more

Play in nature is a very useful thing to release tired. When I was child, I like walking along fields behind houses also in my school I often walk behind the hostel which is directly passed of mountain and forest. But now, I realize that return to Allah is much more different. One day, I found a book that sparked my passion, about Islam at the same time found the book "Andrea Hirata Novel's" that makes me dream to wander away from home. Now, I am on my way to be a survival of my self. My background as Marine Structure Engineer give me chance to calculate onshore and offshore building. I actually still looking for what makes me interested to what I'm doing now, though I secretly like to read the problems that occur frequently at the coastal lately and claims to be the coastal communities (stay on the coastal, should know the problems and solutions at the coastal). A certain goal I am very enthusiastic in the field of structure. I love to practice martial arts, learning language, go to a place that I found useful therein.

I am successful in building quality relationship with clients on various oil and gas projects as a mechanical engineer and piping engineer with my skills in drafting, modeling and FEA analysis as per... Read more

I am successful in building quality relationship with clients on various oil and gas projects as a mechanical engineer and piping engineer with my skills in drafting, modeling and FEA analysis as per industry code ASME B31.1, ASME B31.3, API 610, 650, 620 and WRC107. NEMA SM 23 etc. I am experience in modeling 3D piping, generating isometrics, and check pipe spec and bill of material.

-Prepare (GA, Isometric, Plant Layout, As-Built) Drawing -Prepare Material RFQ, Take-off, BOQ -Prepare Piping Stress Analysis - Intermediate Operation SOftware Plant ( PDMS,Smartplant 3d,AutoCad 3D/2D... Read more

-Prepare (GA, Isometric, Plant Layout, As-Built) Drawing -Prepare Material RFQ, Take-off, BOQ -Prepare Piping Stress Analysis - Intermediate Operation SOftware Plant ( PDMS,Smartplant 3d,AutoCad 3D/2D, Cadworx,etc) Experience 6 years

I AM CIVIL UNDERGROUND AND PIPING ENGINEER Read more

I AM CIVIL UNDERGROUND AND PIPING ENGINEER

http://ve.linkedin.com/pub/jos%C3%A9-mauricio-amundarain-cascella/2b/667/906/ Read more

http://ve.linkedin.com/pub/jos%C3%A9-mauricio-amundarain-cascella/2b/667/906/

Hello I am a civil engineer with 8 years experience in Civil & structural design, water and drainage network design. my computer skills helps me to finish any technical office challenge, and i also... Read more

Hello I am a civil engineer with 8 years experience in Civil & structural design, water and drainage network design. my computer skills helps me to finish any technical office challenge, and i also can make projects schedules using primavera p6. I have passed the F.E. civil exam and i am preparing to enter the P.E. (PROFESSIONAL ENGINEER) civil structural depth exam next year. (EXAMS TO BE LEGALLY ABLE TO PRACTICE CIVIL ENGINEERING IN U.S.A.)

B.Tech in Mechanical Engineering with 2+ years experience in using Computational Aided Engineering (CAE) techniques for solving various engineering problems as mentioned below: HVAC pipe Stress ana... Read more

B.Tech in Mechanical Engineering with 2+ years experience in using Computational Aided Engineering (CAE) techniques for solving various engineering problems as mentioned below: HVAC pipe Stress analysis Support design for pipelines to withstand Thermal & Seismic loads Surge analysis of HVAC pipes HVAC system optimization for making Greener Building Pulsation & Mechanical Analysis of Pipeline (As per API 618, and API 674 standards) Seismic design of components inside a building Solve complex engineering challenges using mathematical modeling and numerical simulations

I have over 10 years experience in the design of Oil and Gas industry. There is experience in large project organizations (STG Engineering) . Developing piping drawings, isometric drawings, material t... Read more

I have over 10 years experience in the design of Oil and Gas industry. There is experience in large project organizations (STG Engineering) . Developing piping drawings, isometric drawings, material take-off and stress analysis calculations of pipelines. Work with suppliers of equipment. Supervision of construction sites. Last project was carried out for the company TOTAL (Khatyaga EP-2 ) Professional skills in the work with the programs: AutoCAD, CADWorx Plant 3D, intergraph smart 3D (PDS), AutoPipe, Intergraph CAESAR II - Pipe Stress Analysis, Navisworks

A Chartered mechanical engineer 27 years experienced in the design, implementation, and management of complex development projects. Excellent command of standard engineering practices for oil & gas u... Read more

A Chartered mechanical engineer 27 years experienced in the design, implementation, and management of complex development projects. Excellent command of standard engineering practices for oil & gas upstream, midstream, downstream, and Power industries. Specialties: Piping Layout ♦ Piping materials ♦ Static and Dynamic Piping Stress Analysis ♦ Pipe Support Engineering ♦ can Travel Offshore ♦ Project Management Professional Chartered Engineer (CEng), Engineering Council, UK Membership: Member (MIMechE), Institution of Mechanical Engineers, UK Software Skills: PDMS ♦ S3D ♦ Caesar II ♦ Autopipe ♦ PSA5 ♦ Navisworks ♦ Smart Review ♦ FEPipe ♦PVElite ♦ Ansys ♦ Microstation ♦ AutoCad ♦ Lotus Notes ♦ Smart Plant Foundation

VP & Sr. Piping Designer Calgary, Alberta, Canada Vice President Specialties • Business Operations & Development • Innovation & Design For Oil and Gas • Marketing Stradegy & Development • We... Read more

VP & Sr. Piping Designer Calgary, Alberta, Canada Vice President Specialties • Business Operations & Development • Innovation & Design For Oil and Gas • Marketing Stradegy & Development • Web Design & Development Strategic collaboration for direction of the company and responsible for carrying out the strategic plan through overseeing operations, developing functional roles and assigning responsibilities to employees. Sr. Piping Designer Specialties • 3D Piping designs for various oil and gas process plants re generators, compressors, storage tanks, pipe racks, & Coolers • 3D Equipment layout, checking & designs for contactors, filters, exchangers, scrubbers, coolers, and storage tanks. for Refinery. (Hand Sketches, P&ID/Field walk downs, As-Built) • P&ID's/manual drafting -CadWorx -Bentley Autoplant -Solidworks -PDMS -CAD system management, AutoCAD 2000-2008 -ProCAD (AutoFLOW, AutoISO, and AutoORTHO.) -Microstation -Navisworks - 3D Piping & Equipment Modeling -P&ID’s/manual drafting

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanica... Read more

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanical. My current specialty involves piping engineering (Stress analysis), Code Calculations; and well acquainted with Pipeline Calculations (Hydraulic analysis, Surge Analysis, Pipe Wall thicknesses for internal and external pressure; and branch Connection) as per Referenced ASME Standards. I have a wide exposure to different multinational engineering firm’s environments and standards through participation in part time and full time contracts projects. Core Competencies • Well acquainted with ASME Codes (B31.1, B31.3, B31.4, B31.8, SEC. VIII DIV. 1) Calculations • Preparation of technical specifications and design calculations • Preparing Critical Line Lists • Static and dynamic stress analysis of piping systems (Sustained loads, Expansion loads &Occasional load) Using CAESAR II • Specializing in pipe stress analysis and advising design team on arrangement and support requirement to work within code stress requirements • Pipe support hardware selection & details drawings. • Nozzle flexibility Check • Equipment Nozzles Calculation as per (NEMA SM23, API 610, API 617, API 661 and API 650) • Flanges(Raised & Flat Face, Reversed, Clamped hub) calculations • Isometric Stress Sketches and Civil info Sheets • Proper design of firefighting pipes supports and bracing as per NFPA 2010 chapter 9. • Buried Piping (ASCE, ALLA, PENG, AWWA, NEN 3650). Highlights ASME (B31.1, B31.3, B31.4, B31.8, Sec. Viii Div1); Autocad Plant 3D; AFT Fathom Impulse; Autopipe; Bentley Hammer; Bentley Water Gems; Caesar II; CADWORX; Fluid Networks Computation; Hangers And Springs Selection; Navis Work; Pipe Flo; Pipe Supporting; PRG 2011 (Nozzle Pro, Fe-Pipe, Fe-Bend, Fe-Sif); Revit Mep; Smart Plant 3D; Static & Dynamic Stress Analysis; Surge Analysis; Wall Thickness Calculations; PDMS

Piping Engineer capable to integrate into piping layouts the best industry practices, flexibility analysis and support selection. I have experience in the departments of materials, design and flexibil... Read more

Piping Engineer capable to integrate into piping layouts the best industry practices, flexibility analysis and support selection. I have experience in the departments of materials, design and flexibility; developing activities as piping designer, stress engineer, field survey, BOM, reviewing specifications and documents of different disciplines, meetings with the customer, client counseling in English and Spanish. I have proficiency in SmartPlant 3D, PDS, CAESAR II, AutoCAD and others. Professional Training: - CAU Express 2015. Intergraph. October 2015. Duration 8 hours. - Stress Analysis of Piping Systems and Support Selection (CAESAR II) Inelectra. July 2015. Duration 40 Hours. - Supporting Piping Systems with CAESAR II and SmartPlant 3D. Inelectra. June 2015. Duration 8 hours. - SmartPlant 3D Piping. Inelectra. December 2014. Duration 40 hours. - SmartPlant 3D Equipment Modelling. Inelectra. November 2014. Duration 24 hours. - Piping Design II. Inelectra. June 2014. Duration 32 Hours. - Piping Design I. Inelectra. March 2014. Duration 32 Hours. - Pipe calculations (ASME B31.1, B31.3, B31.4, B31.8). Engineers Association of Venezuela. February 2013. Duration 24 hours. - Integration of Process Energetic (Pinch Methodology). Tecnopinch Integral Solutions. December 2012. Duration 8 hours.

Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1  OBJECTIVE: To obtain a position within a large dynamic company wh... Read more

Plant Layout & Piping Design Engineer Ashraf Waly 16 Ismail Ramzy, El-Gamea square, Heliopolis, Cairo, Egypt Floor 5, Flat 1  OBJECTIVE: To obtain a position within a large dynamic company where there are opportunities for growth and development. CAREER PROFILE: § Excellent interpersonal skills with an ability to work effectively with individuals at all levels. § Soft skills: Strong team work attitude and ability to motivate the team members, significant communication skills, problem solving attitude, fast and multi-task execution capabilities, strong analytical mind set and imaginative problem solving ability. PROFESSIONAL EXPERIENCE: PGESCo, Power Generation Engineering Service Company Consultant BECHTEL Partner Title : Senior Plant Design Engineer • Professional knowledge: clear and solid knowledge of all the plant design, piping engineering related activities & Interaction with Process Licensor including review of P&IDs & Preparation of Piping Design Basis. General Layout (Site Plan) & Piping Design Criteria Equipment Layout Plan (Unit Plot Plan) Piping Assembly Drawings Key Plan , U/G Piping Composite dwg.(s) Piping routing studies & Underground system routing Piping & Instrumentation Diagrams (P&IDs) , Line List Piping Specifications (e.g. supply, material, dimensional, fabrication, erection / installation, welding incl. equipment welding, testing, PMI, insulation) List of piping special components & Material take off (Bill of Material) Technical Bid Evaluation & vendor documentation for piping material 3D- Model , Piping isometric design and issue procedure Piping isometric list , drawing Pipe support specification ,summary & check . • Piping Material and Valve Material Specifications • 3-D Modeling and layout design. • Ensuring compliance with Procedures, Work-instructions and Check-lists • Arranging 3-D Model and checking dwg. And Isos • Equipment design (Tanks ,heat exchangers, Pumps, Compressors ………etc ) • Drafting composite drawings and extracting Isometrics. • Responsible Engineer for the Plant layout , Plant General Arrangement & Equipment Locations ) • Check and review Project /vendor, Contractors drawings. • Issue of Design Change Requests/Notes and Man-hour Change Orders • Site interface and support/co-ordination • Standardization (e.g. Updating of Specifications, Technical Notes) • Responsible Engineer of (waste/water treatment & desalination water) packages. • Coordination with other disciplines (Electrical, Civil, Archtiecture, Control,etc) • Coordination with Site Construction Managers/Other Responsible Engineers. Since May 2008 to Nov.2012 • Project shared in : EL-TEBBIN Power plant 2*350MW ,ABOU-QIR Power plant 2*650 MW,EL-SOKHNA “Super Critical” Power Plant 2*650 MW , El-Suez power plant 650 MW ARAB CONTRACTORS CAMEROON LTD YAOUNDI –OLAMA (ROAD CONS. PROJECT), CAMEROON Since 2007 to 2008 §Site & Tech.office Manager of (Asphalt Mixing /Concrete) Plants and Asphalt equipment &Spray bitumen tanks trucks, compactors, .etc). (Cameroon-Yaoundé 2008) §Controller and Tech.operator for all kinds of asphalt /Concrete plants ARAB CONTRACTORS “OSMAN AHMED OSMAN” Transportation projects sector (Roads and railway projects), Cairo Since 2003 to 2007 §Maintenance, Repair and Designer engineer for all No. of eleven ASPHALT MIXING PLANT. (Cairo 2003) §Manager of asphalt pavement sector. (2004) §Manager for all No. of elevens ASPHALT MIXING PLANT. (2005-2007) §Visitor lecturer in (MTI-MANAGEMENT &TECHNOLOGY INSTITUTE) (2005-2007) Sugar Industrial Integrated Co., Hawamdeya, Cairo 2002-2003 Associate Industrial and designer engineer §Learning a full description of the sugar industry techniques. § Completed studies and validations on all stations in the factory started at milling and ended at packing stations and the control stations. § Completed studies and validations on all equipment used on the production floor. § Completed studies on the processes and instrumentations diagram (P&ID) of the factory. § Dealing with the factory’s software packages which used in the design and the analysis of the piping, structure and equipment. §Learning the creation of change requests required to amend standard operating procedures. § Conducted trouble-shooting investigations prior to the start up of new production lines. §3-D Modeling and stress analysis calc. § Provided general support to the B.Sc. Project. Army Factory 909 of Engines, Helwan, Cairo Training & work 2000-2002 Engineering Assistant (Summer Placement) § Assisted with the creation of Auto-CAD drawings. § Completed evaluation forms on CNC machines as detailed by the Senior Engineers § Filed and typed up engineering data. § Devised layout drawings on Auto-CAD for the review of the Senior Engineer. § Completed studies and validations on all equipment used on the production floor. § Provided Engineering support for each production area. § Provided general support to the department. EDUCATION: Cairo University, Cairo, Egypt July 2003. BSc. in Machine design and production. Excellent degree in B.Sc. project. Headway University, California, USA, April 2012 MSc.in Mechanical Science Engineering ASME Professional member SPED Professional member PROJECT HISTORY: Project name is “Computer aided design for an industrial piping network “. The goal of my project to give a complete modeling of an evaporation station used in sugar industry techniques and to perform stress analysis on the main pipelines feeding the evaporators. From the main objectives of the project is studying the various types and features of pipe fittings and its accessories including materials, codes, design conditions, design rating and pressure &temperatures rating. Software packages used in project: • AUTOPLANT packages (STEEL_STRUCTURAL, EQUIPMENT, and PIPING). • AUTOPLANT (P&ID) PACKAGE • AUTOPIPE PLUS (stress analysis) package. • COSMOS/M package(finite element analysis) • AUTOCAD 2000 package. ADDITIONAL INFORMATION & Skills: Proficient in the use of: • Autodesk Autocad (2D-3D)2000-2002-2004 • Bentley AutoPlant 3D (STEEL_STRUCTURAL, EQUIPMENT, PIPING). • AUTOPLANT (P&ID), Material Database. • AUTOPIPE PLUS(stress analysis) • COSMOS/M package(finite element analysis) • Smart Plant 3D “Intergraph Package” • Smart Sketch 3D “Intergraph Package” • Inventor 8 ,11 • Microstation/J • 3DM “BECHTEL confidencial programe package” • Pipeflow programe package • Mechanical desktop • 3DMAX CAD 09 • Intelligent CAD 2001 • Visual basic • Microsoft Word, Excel, PowerPoint, Photoshop • Courses completed through study include Thermodynamics, Machine Design, Heat Transfer, quality control, management, CNC programming, Plant engineering, metal forming…..etc. • Familiar & Courses attended (ASME B31.1,B31.3 …etc) and ANSI ,NFPA ,API ,AWWA,OSHA,Valves Selection…………etc codes ,Specifications and standards • Many Seminars/Conferences were be attended in/out work field • Good knowledge in Electric /Control. • Languages: Fluency in spoken & written English. PERSONAL DETAILS: Date of birthday: 12 February 1980 Religion: Muslim Marital status : Married and have a Son. Military service: done Drive license: Valid INTERESTS: Football, Reading, Travel, Internet.

BIM Interior Architect/Designer Profile • Experience and Skills: o Expert in Building Information Modeling (BIM) with a focus on ArchiCAD. o Proficient in creating detailed 3D models and accurate pr... Read more

BIM Interior Architect/Designer Profile • Experience and Skills: o Expert in Building Information Modeling (BIM) with a focus on ArchiCAD. o Proficient in creating detailed 3D models and accurate project documentation. o Skilled in coordinating with architects, engineers, and construction professionals to ensure project success. o Strong understanding of architectural design principles and construction processes. o Adept at managing project timelines and delivering high-quality results under tight deadlines. • Strengths and Skillsets: o Advanced knowledge of ArchiCAD and BIM workflows. o Excellent problem-solving abilities and attention to detail. o Strong communication and collaboration skills. o Ability to integrate and manage various project data efficiently. o Proficiency in visualizing and presenting complex architectural concepts. • Projects and Accomplishments: o Successfully completed multiple large and small scale residential and commercial projects. o Recognized for delivering innovative design solutions that meet client requirements. o Consistently met project deadlines while maintaining a high standard of quality. • Education: o Bachelor's Degree in Interior Architecture - France. o Master Degree in Retail Design and Visual Merchandising - Barcelona. o Master Degree in Design Management - Barcelona. o Continuing education in BIM technology and ArchiCAD advancements.