Hire the best freelance Schematic Drawings expert designers for your company

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of... Read more

As a highly experienced Senior Mechanical Engineer with a track record spanning over 15 years, I have successfully navigated many different industrial domains. My mission is to leverage this wealth of engineering expertise to deliver premium consulting services, encompassing everything from design to creation of concept-to-manufacture schematic drawings, FEA analysis, and comprehensive Design for Manufacturability (DFM) insights. My proficiency extends to various SolidWorks certifications. With a proven ability to excel across a wide spectrum of industries, I invite potential clients to peruse my portfolio. I look forward to connecting with you and/or your company to understand your specific goals and collaborate on tailored solutions that will drive your success to new heights.

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goal... Read more

An adept individual with a keen interest in the field of Electrical designing, in pursuit of a career that helps in the development of my personality through the fulfillment of the organizational goals. My strengths include great electrical designing skills, people and time management, strong communication and interpersonal skills. I am a go-getter and work hard to achieve my goals. I am a diploma holder in electrical engineering with more than 20 years of experience and since 2000 I am working for a US based multinational automation company, which mainly deals with AC Drives, DC Drives, Higher rating thyristor bridges, MCC, PCC, Capacitor panel, CLX panels and Flex I/Os panels. Through this rich experience I have gained good knowledge in electrical switch gears and various electrical standards like NEMA and IEC. Also I realize the value of customer satisfaction and trust. I am specialized in designing layout diagrams (GA and IGA), SLD, Schematic diagrams, Cable tray layouts, Room layouts and Bill of Materials for all kinds of electrical panels. I do the panel sizing, switch gear selection and cable schedules independently. I am also an expert in designing control scheme (Ladders) for interlocking of power and control circuits. For schematic drawings I use all the features in AutoCAD electrical.

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I am Stenly Roy. I am an electrical engineer. I have been 12 years experience as an electrical designer of HV, LV distribution system & ELV system with expertise AutoCAD drafting & Revit modelling sof... Read more

I am Stenly Roy. I am an electrical engineer. I have been 12 years experience as an electrical designer of HV, LV distribution system & ELV system with expertise AutoCAD drafting & Revit modelling software skill. I have knowledge of Dialux software for internal & external lighting calculation & generate reports. I can make MEP shop drawing plan, sections and installation details. I can prepare MEP Revit Model (LOD-100,200,300,350,400,500) without clash detection with help of Navisworks and generate clash report. I have knowledge of making walk through and Construction Procedure in 4D Simulation video with Time Liner Data with help of Navisworks manage software. I had worked various kinds of projects such as buildings, industrial, plants. I also worked with one of Bahrain’s companies M/S. mercury Middle East WLL. was hired me for one year contract basis for their Cardiac Hospital to make MEP Revit modelling, coordination & Electrical, ELV shop drawings in year 2016-2017. Following services I provide. 1. Electrical Design -Internal & external lighting calculation in Dialux Evo & generate calculation report. -Low voltage & High voltage Distribution. -SLD of Panel -Schematic layout of Power circuit & control circuit -ELV Schematic Layout 2. MEP Autocad Drafting -Supply, return,exhaust Ducting layout -Chilled water,Drainage piping layout -Electrical all system shop drawing -Installation Detail of Electrical & Mechanical Equipment. -Plumbing drainage & waste water layout -Plumbing water supply layout -Fire fighting piping layout -Utility Piping layout 3.MEP BIM Implementation -Prepare MEP model with respective LOD -Refer & study design specification of all services then Implement in model. -Detail study of IFC/GFC drawing. -Inter discipline coordination. -Coordination with all MEP discipline & architectural, structural with use of Navisworks software - Prepare time liner of project procedure 4D simulation with help of Navisworks

12 years of experience in CAD-designing electrical schematic drawings for 5kV through 38kV switchgear. Device Development diagrams Single-line, three-line diagrams Vacuum circuit breaker control diag... Read more

12 years of experience in CAD-designing electrical schematic drawings for 5kV through 38kV switchgear. Device Development diagrams Single-line, three-line diagrams Vacuum circuit breaker control diagrams Relay Protection and Automation circuits Аuxiliary equipment diagrams Communication and Scada diagrams and other

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of th... Read more

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of the areas of I&E Design, including basic knowledge of UL Industrial Control Panel fabrication standards for non-hazardous (UL 508A) and hazardous locations (UL 1203, 698A). Assist in conducting field audits and investigations of customer facilities and manufacturing plants. I try to identify opportunities for improvement and make constructive suggestions for change. Comply with company standard policies and procedures. I have experience and Technical Training in Instrument and Electrical Design for the Industrial, Commercial, Manufacturing, or Oil and Gas industries. iOccasional travel to client offices and construction sites will be required.

I am a Electrical Engineering student. I can draw 2D projects in Auto-cad. I have the experience to draw tray routing plans and civil plans, electrical schematic drawings. Read more

I am a Electrical Engineering student. I can draw 2D projects in Auto-cad. I have the experience to draw tray routing plans and civil plans, electrical schematic drawings.

Qualified Electrical Design Engineer with proven design skills in Electrical System Design. Skilled in Autocad 2D, Dialux4.11 and Revit with good designing knowledge in every electrical services. Seek... Read more

Qualified Electrical Design Engineer with proven design skills in Electrical System Design. Skilled in Autocad 2D, Dialux4.11 and Revit with good designing knowledge in every electrical services. Seeking a challenging career, where I can contribute my knowledge and experience. Job Description Overall execution and monitoring of an electrical design project Preparation of electrical drawings like concept design drawing, design drawing, shop drawing and schematic diagram of various LV and ELV services like Lighting, Simple power, Emergency lighting, Escape routing, Containment, CCTV, Fire alarm, Telecom & Data, Access control and SMATV Preparation of DB Schedule and Cable Schedule Preparation of Cable Tray and Cable Tray Schedule Preparation of Trunking and Trunking Size Calculation Preparation of Voltage drop calculations Preparation of Section drawing of Electrical Room Transformers sizing and selection based on various standard requirements like DEWA,SEWA,etc Well familiar with different rules and standards of DEWA

 Performing overall layout drawings of Piping arrangements involved.  Detail drawing for entire Pipe & Duct system and checking correlated with standard drawings.  Extraction of isometrics drawin... Read more

 Performing overall layout drawings of Piping arrangements involved.  Detail drawing for entire Pipe & Duct system and checking correlated with standard drawings.  Extraction of isometrics drawings with respect to the General Arrangement & overall layout.  Preparation of Bill of Quantity for Piping and its fitting components.  Tabulating different types of pipe supports in accordance with Pipe support schedule to execute bill of quantity.  Final Review of Pipe ducting components MTO and coordinate with procurement for order placing.  Checking issues of fabrication detail drawings according to schematic drawings.  As-built drawings taken as per site erection.  Aware of HVAC Drawings (HVAC Plan, Section, Schematic, and Balancing) respect to design requirements and contract requirements with coordination of other disciplines and submitted as per the approved schedules to the consultant / client for review & approval.

Multi disciplinary design experience, Top quality CAD Design Services. Detailed design technician, Design Engineer and Top tier Draftsman. Nothing is impossible, no project too complex. I am dedicate... Read more

Multi disciplinary design experience, Top quality CAD Design Services. Detailed design technician, Design Engineer and Top tier Draftsman. Nothing is impossible, no project too complex. I am dedicated to helping my clients achieve their design goals and committed toproviding skilled support to drive projects forward and give my clients projects the competitive edge.

I have over 8 years of construction industry experience as a Mechanical Drafting specializing in HVAC Ducting, HVAC Piping, Plumbing Drawings, Isometric Drawings, Schematic Drawings, Riser Drawings an... Read more

I have over 8 years of construction industry experience as a Mechanical Drafting specializing in HVAC Ducting, HVAC Piping, Plumbing Drawings, Isometric Drawings, Schematic Drawings, Riser Drawings and 3d Parts Modeling. My areas of expertise include mechanical building services drawing, CAD documentation and bill of quantities. I always strive to clearly understand my customer's needs before starting any project to make sure we are aligned on what the final design should be. Thank you in advance, I look forward to working with you :). Best Regards, Anas

* Proficiency in AutoCAD * HVAC, Utility piping designs * Proficiency in MS office (Excel, word, PowerPoint) * Project Schedules - MS Project Read more

* Proficiency in AutoCAD * HVAC, Utility piping designs * Proficiency in MS office (Excel, word, PowerPoint) * Project Schedules - MS Project

An Electrical Engineer with experience in electrical switchboards design, motor controllers, mechanical services switchboard using Auto CAD, Corel Draw and some knowledge in Sketch Up. Read more

An Electrical Engineer with experience in electrical switchboards design, motor controllers, mechanical services switchboard using Auto CAD, Corel Draw and some knowledge in Sketch Up.

EICA Estimators & Engineers is an independent freelance construction projects estimating & engineering service provider in Qatar. Our Estimators will provide comprehensive cost estimates for the compl... Read more

EICA Estimators & Engineers is an independent freelance construction projects estimating & engineering service provider in Qatar. Our Estimators will provide comprehensive cost estimates for the complete Electrical, Instrumentation and Control Automation systems associated with Commercial, Residential & Industrial Construction projects. Our Estimators are highly qualified field experienced Engineers with in depth knowledge in Engineering, Design, Construction (both Supervision as well as Project Management). Our estimators have extensive experience in cost estimate preparation, Tender Document preparation, Construction Engineering documents preparation and Quantity survey for small, Medium and Large scale Construction projects either, new builds, extensions, refurbishment projects. Our Estimators have successfully estimated many of construction projects around the country and overseas. Estimation services § Bid &Tender Estimates § Conceptual Estimates § Cost & Value Engineering § Cost Comparisons § MEP/ Electrical Subcontractor Bid Reviews (Scope & Price) § Material Lists § Quantity Takeoffs § Electrical Systems Cost Reduction Alternatives § Cost Estimate Database Development Engineering Services § Design, Construction & Shop drawings preparation § Design calculations preparations § Schematic drawings preparation § Review of Design, Engineering and construction documents. § Detailed scope Matrix preparations § Construction, Testing & Commissioning Method Statement Preparation. § Conceptual Design & FEED § Scope, BOQ & specifications preparation Technical Expertise § Electrical Systems (ELV, LV & MV) § Indoor & Area Lighting systems § Instrumentation Systems § Building & Industrial Automation & Process Control (PLC/SCADA/BMS & DCS) § Structured Cabling & Telecom systems § ELV systems ( Public Addressable, Fire alarm, Audio Visual etc) § Cabling & Earth works § Security & Surveillance Services ( CCTV, Access control etc)

Here at imagine Reality we believe that each & every 'space' has the potential to become unique yet harmonious, beautiful yet functional, & most importantly, all yours. We specialize in the followin... Read more

Here at imagine Reality we believe that each & every 'space' has the potential to become unique yet harmonious, beautiful yet functional, & most importantly, all yours. We specialize in the following: Architectural Design | Space Planning | Design Consultation | Concept Development | Visualization Our goal is to ensure that you are completely satisfied with the way your 'space' looks, feels & functions. From full-scale projects to small renovations & face-lifts, we are here to help you envision your 'space' . . . to imagine your own Reality. Please visit us at www.iRdesignCreate.com and follow our social media (FB & IG) @iR.design.create

Diploma graduate in Architecture and Draftsmanship. Proficient in AutoCAD, SketchUp and Solid Works. Shop drawings, architectural working drawings, Schematic drawings. Read more

Diploma graduate in Architecture and Draftsmanship. Proficient in AutoCAD, SketchUp and Solid Works. Shop drawings, architectural working drawings, Schematic drawings.

I have been working for almost three years now. Experienced in Archicad software to produce technical to schematic drawings. Well versed in Lumion to produce 3D visualization and renderings. Read more

I have been working for almost three years now. Experienced in Archicad software to produce technical to schematic drawings. Well versed in Lumion to produce 3D visualization and renderings.

Product development and digital photorealistic 3d content for presentation, installation services,and advert. Read more

Product development and digital photorealistic 3d content for presentation, installation services,and advert.

I have been in the CAD field for about 10 years now. My background is a mixture of 2D and 3D in the civil, structural, substation, and OSP Fiber and Coax Design. Read more

I have been in the CAD field for about 10 years now. My background is a mixture of 2D and 3D in the civil, structural, substation, and OSP Fiber and Coax Design.

I am Elecronics/Power Electronics Engineer having experience in Circuit Design, Circuit Schematics, PCB Layout Design, Circuit simulations and Circuit 3d drawings/models. I can do PCB Layout design an... Read more

I am Elecronics/Power Electronics Engineer having experience in Circuit Design, Circuit Schematics, PCB Layout Design, Circuit simulations and Circuit 3d drawings/models. I can do PCB Layout design and can provide PCB files for hardware manufacturing purpose. I can also do electrical 2D drawings and schematic diagrams. So feel free to discuss your creative projects and make end results satisfying and efficient.,

I Have a associates degree in Mechanical Engineering and an Electronics Technician Degree at the college level. My best asset is 3D modelling as well as 2D drafting drawings. I am also capable of doin... Read more

I Have a associates degree in Mechanical Engineering and an Electronics Technician Degree at the college level. My best asset is 3D modelling as well as 2D drafting drawings. I am also capable of doing circuit board design or any schematics or CAD drawings for electrical/electronic purposes.