I am a freelance product design engineer (CSWE Certified). Have 7+ years of experience on plastics design and sheet-metal design. I also cater to automobile industries and ancillaries for Class-A... Read more

I am a freelance product design engineer (CSWE Certified). Have 7+ years of experience on plastics design and sheet-metal design. I also cater to automobile industries and ancillaries for Class-A surface models as a freelance consultant.

I believe, my ability to think out of the box enables me to challenge myself, and the most fundamental concepts. My experience in benchmarking prevalent analysis tools (Ansys / Nastran) by coding... Read more

I believe, my ability to think out of the box enables me to challenge myself, and the most fundamental concepts. My experience in benchmarking prevalent analysis tools (Ansys / Nastran) by coding in MATLAB ensures my analysis is not constrained by commercial analysis tools. I’m confident that my skills and passion for industry are a perfect match to the company looking for a motivating Designer. I hold a Master’s degree in Aerospace Engineering from University of Sydney and have worked as Senior Design Engineer for Larsen & Toubro's Technology Development Centre that caters to the conglomerate's Aerospace division. After which, I worked as a design and development engineer for Bauer GMBH. I look forward for an opportunity to work on projects where I can improve my skills and strengths with the accomplishment of the clients goals and objective.

I have done diploma in biw fixtures and design and work on live project of auto rikshaw chasis and biw fixture and line project of door trim ,dash board ,console,seat in plastic domain by using... Read more

I have done diploma in biw fixtures and design and work on live project of auto rikshaw chasis and biw fixture and line project of door trim ,dash board ,console,seat in plastic domain by using catia Vr21 and automobile interior and exterior design etc,I like to make my career in auto mobile design engineering and Analysis..

Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering... Read more

Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Fusion360 software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports.

A problem solver full of ideas, A man with a plan, A Mechanical engineer, A machine designer who can bring ideas to reality.an experienced machine designer and a marketing executive. Being a... Read more

A problem solver full of ideas, A man with a plan, A Mechanical engineer, A machine designer who can bring ideas to reality.an experienced machine designer and a marketing executive. Being a mechanical design engineer and marketing executive, I have learnt a lot and wish to learn more working with you. My experience in design software enables me to explain people my ideas and marketing skills help me to sell people my ideas in the form of end products. In my former role as Marketing Executive I learnt management skills along with technical skills that helped me grow. The Pune Metro project that I worked on helped me learn about the bridge builders and Fuwa India actually helped me imbibe marketing skills. The internships that I underwent with Drishti Works And Seamak Group gave me an technical upper hand and helped to know how mega structures work and gave me an overview of how companies function. I have done a specialized Diploma in MECHANICAL CAD and the internship helped me improve my knowledge in 3D printing. Working with your firm will help me grow while fulfilling the organizational goal. Kindly feel free to reach out to me for anything required from my side. Looking forward to get an opportunity to speak to you further. Thanks for the time and consideration.

I am devoted design engineer. I have completed my Diploma, BE in Mechanical Engineering and now i am pursuing higher studies in Design Engineering. Design gives me immense pleasure, Its my passion.... Read more

I am devoted design engineer. I have completed my Diploma, BE in Mechanical Engineering and now i am pursuing higher studies in Design Engineering. Design gives me immense pleasure, Its my passion. So my desire is to give Quality, professional & satisfied service to my client. I have enormous capability in 1. Completing Critical Designs 2. Creating Concept Designs 3. Motion Analysis I have hands on experience in softwares like 1. Solid works 2. Auto cad 3. Ansys 4. Google Sketch up I hope we can have a better experience ahead. Thank You very much for your Valuable time!!!

I am professional design engineer. worked since 6 yrs in design field. My services are as follows, 3D modelling, Product design, 2D design & drafting, Rendering, Architectural design, File... Read more

I am professional design engineer. worked since 6 yrs in design field. My services are as follows, 3D modelling, Product design, 2D design & drafting, Rendering, Architectural design, File & format conversions

Mechanical Design Engineer| Product design| Design Thinking|Innovation| Prototyping I am a mechanical engineer experienced in SolidWorks. Along with my CAD experience, I have worked in the... Read more

Mechanical Design Engineer| Product design| Design Thinking|Innovation| Prototyping I am a mechanical engineer experienced in SolidWorks. Along with my CAD experience, I have worked in the manufacturing industry so I know how things work in the real world and can design accordingly. I am also creative in my designs and innovative ideas: My skill sets are: 1.Design, Development, and Drafting. 2. Prototype Designing and Assembling. 3.Product Verification & Validation. 4.Project Management. 5.Developing fundamentals like Core & Cavity, Parting lines, Draft, Sliders, Snapping for Plastics Products 6.Product Design for Plastic and Sheet metal Products. 7.Knowledge of Manufacturing operations like Blanking, Forming, Piercing, Riveting etc. for sheet metal products. 8.Bench-marking and Reverse Engineering. 9. Geometric Dimensioning & Tolerancing. 10. Design and Development knowledge of Extrusion Profiles and Machining of these profiles. 11. Design and Development of mechanisms.

I'm an Aeronautical Engineer with a passion for product design. I've been involved in 3D design and analysis for the last four years, from designing parts for the Aeromodelling team to working as a... Read more

I'm an Aeronautical Engineer with a passion for product design. I've been involved in 3D design and analysis for the last four years, from designing parts for the Aeromodelling team to working as a design engineer for a 3D printing company. Currently, I'm working for an upcoming startup as a Lead Design Engineer. -My most recent accomplishment is being named a Dassault Systèmes "Solidworks Champion" for my 3D design abilities. -I won India's top hackathon, Smart India Hackathon, for designing and manufacturing a Smart working sleeve, and the Dassault Systèmes Aakruti 2019 competition for developing a Modular Myoelectric Prosthetic Arm prototype.

Hi, I am Mechanical Design Engineer with 4+ years of experience in Designing of Plastic & Sheet metal products. Big ideas are worth nothing. It's only when they're translated into reality by... Read more

Hi, I am Mechanical Design Engineer with 4+ years of experience in Designing of Plastic & Sheet metal products. Big ideas are worth nothing. It's only when they're translated into reality by seamlessly executing, those ideas become worth millions. I like to associate with such professional who intend to solve engineering problems and bring technology which transforms human lives. With 4+ years of experience in design, I work at the nexus of Designing of Plastic & Sheet metal products industry. My areas of expertise are: 1.CAD Software : AutoCAD (2D + 3D) , SolidWorks (2D + 3D) 2.Solid Modeling, Surfacing, Part modeling , Sheet Metal , Assembly 3.Design for manufacturing & assembly. 4.Reverse Engineering. It would be great honor to do work with you and that will initialize the new business relationship. I would be highly grateful if you consider discussing the details of your upcoming projects. Looking forward to hear from you.

My Name is Nitesh ,I will provide you full services on Manufacturing , Fabrication and product 3D models and drawings for Plastic and Sheet Metal parts with GD&T Standard ASME14.5 . Key Skills... Read more

My Name is Nitesh ,I will provide you full services on Manufacturing , Fabrication and product 3D models and drawings for Plastic and Sheet Metal parts with GD&T Standard ASME14.5 . Key Skills and Provided Services: Technical Drawings and Source Files, Ready for Manufacturing Drawings Engineering Drawings with GD&T, BOM files and Specs Data, Drawings for Laser Cutting operation Sheet metal Drawings - for bending operations and bend lines specs. Industrial and Concept Product Designs, Drawings for Inspection - Plastic injection/Rotational Molded , CNC Manufacturing and Mold Design - Injection and Rotational Molding. Advanced Technical Report Writing, Why choose me? I am professional mechanical design engineer with 7 years experience in Automobile Parts ,Machine and Plastic Parts design and also licensed product designer. Have Professional experience on the usage of engineering design and analysis software tools such as Autodesk Fusion 360, Solidworks, Autocad, PTC Creo, Ansys etc.

Mechanical Design Engineer Read more

Mechanical Design Engineer

i am mechanical design engineer working on solidworks and autocad software i have good knowledge and experience of designing on industrial plant, pollution control system, and Machines mechanism,... Read more

i am mechanical design engineer working on solidworks and autocad software i have good knowledge and experience of designing on industrial plant, pollution control system, and Machines mechanism, i am able to make 3d model, rendering, static analysis, flow simulation, motion study on movable mechanism and i can make 2d shop floor drawings for manufacturing and fabrication purpose for more information you can see my work and my skill on below link https://drive.google.com/folderview?id=1Apsi0lFXVuDys6CendaifqlANqWeKrtg

I have good knowledge of 3D Modeling as well as 2D drawing of models with GD&T.I have 4 years of experience in design. I design all 3Dmodels on low charges than competitive market. Highly... Read more

I have good knowledge of 3D Modeling as well as 2D drawing of models with GD&T.I have 4 years of experience in design. I design all 3Dmodels on low charges than competitive market. Highly efficient, smart working and talented design engineer Concept development, new product design, manufacturing and construction methods. Experienced in all design stages of a product Development and manufacture including material selection, machining process I had completely worked with SAE projects. I have worked on the projects like SAE EFFICYCLE , SAE BAJA , GOKARTS and SOLAR VEHICLE. Have an experience in robot designing and also the electrical part and basic coding of it.

I am qualified Mechanical engineer with 5 years of experience in design of sheet metal and electro mechanical assemblies and aluminium extrusions. I gained this experience working in the UK for a... Read more

I am qualified Mechanical engineer with 5 years of experience in design of sheet metal and electro mechanical assemblies and aluminium extrusions. I gained this experience working in the UK for a company manufacturing Electromechanical products. I also hold a Masters degree in design engineering and FEA for Staffordshire University in the UK

I am a Design Engineer and I have more than six years of working in software like Autocad, Pro-E, Catia, Unigraphics, Solid works,Ansys.I had done many Projects for Automobile, Plastic and Heavy... Read more

I am a Design Engineer and I have more than six years of working in software like Autocad, Pro-E, Catia, Unigraphics, Solid works,Ansys.I had done many Projects for Automobile, Plastic and Heavy Engineering industries.I have good innovative skills which is needed for success for an organization.Timely delivery and Client satisfaction are my priorities.

ABOUT US COSIMCCADD Services provides cost effective, high quality, computer aided designing and drafting (CADD) services through its offshore facilities in India. Our business model is to partner... Read more

ABOUT US COSIMCCADD Services provides cost effective, high quality, computer aided designing and drafting (CADD) services through its offshore facilities in India. Our business model is to partner with client to act as a back-bone of all non-core engineering functions like detail design, engineering analysis, drafting. Our Mission To provide Design, Drafting and Engineering services as per international standards to companies across the globe and our aim to be a work-share or part of your company with provide our additional engineering and design support, which help you and your team to quick execution, as a (Global Delivery Center). Core Values • Customer Satisfaction • Responsive Customer Service • Integrity and transparency • Pursuit of Excellence • Well-being of Employees and Community • Honesty • Confidentiality of the client data • Security Business Segments :- • Refineries and Petrochemicals • Oil and Gas upstream Projects(Piping, Pipelines) • Agro-Chemicals, Solvent Extraction, Refining and Oil Mills • Water • Chemicals • Pharmaceutical • HVAC Benefits of CAD Outsourcing Services “we work on a competitive rates on hourly basis with a quality design and standard " Thank you in advance and look forward to hear from you soon !! Regards Cosmic CADD

Full time mechanical design engineer well versed with drafting, modelling and finite element analysis of mechanical components. 5 years experience of machine design. Read more

Full time mechanical design engineer well versed with drafting, modelling and finite element analysis of mechanical components. 5 years experience of machine design.

Working knowledge of various designing software like Solidworks,Catia,Creo,Autocad I have also working experience on various analysis software like ANSYS,GSA Read more

Working knowledge of various designing software like Solidworks,Catia,Creo,Autocad I have also working experience on various analysis software like ANSYS,GSA

An accomplished Design Engineer having 15 plus years of experience in Automotive, SPM and HVAC industries. I have successfully implemented numbers of products in the area of Mechanism and plastic... Read more

An accomplished Design Engineer having 15 plus years of experience in Automotive, SPM and HVAC industries. I have successfully implemented numbers of products in the area of Mechanism and plastic part for Automotive OEM like Mahindra & Mahindra. I have implemented projects like automated inspection table, jigs and fixtures designs etc. Proficient in using CATIA V5, Solid works, HAP, Pipe sizer, duct sizer and much more. I am also Dassault systeme recognized CSWP passed.

I am a Design Engineer with over 3 years engineering industry experience. You will see that I draw on a practical trade background as I am a qualified Design Engineer with draftsman and hold a... Read more

I am a Design Engineer with over 3 years engineering industry experience. You will see that I draw on a practical trade background as I am a qualified Design Engineer with draftsman and hold a Bachelor of Engineering in Mechanical Engg. Using Solidworks 2007 to 2017, AutoCAD , catia , PTC Creo and Unigraphics I have: -3 D Modelled & designed sheet metal parts, machined and fabricated components and assemblies . -Created detailed manufacturing drawings as well as the DXF, step & PDF files required for laser/plasma c utting, CNC bending and component production. - Revised & updated engineering drawings & 3D models. - Application of GD&T I have a sound understanding of engineering methods and management and I am committed to workplace safety. I’m comfortable working as a team member, alone & with minimal supervision, or as an external contractor. You will find me reliable, punctual and self motivated. I look forward to discussing this opportunity with you, Sincerely, Mr. Sanket Dahitule

I have 1 year and 8 months experience in R & D department of Coatec India and my Current designation is an Assistant Design Engineer. Rather than this experience I have done 4 to 5 projects in... Read more

I have 1 year and 8 months experience in R & D department of Coatec India and my Current designation is an Assistant Design Engineer. Rather than this experience I have done 4 to 5 projects in automobile field as per following. 1. Electric Golf Cart Design and Manufacturing experience ( 5th Sem) 2. 60 Hp diesel engine friction reduction and made a friction calculation software. (8th Sem) 3. Worked on a project Sonalika DI 750 tractor engine weight reduction. (8th Sem) 4. Made an Electric car for Cheema Bolier Limited. ( 7th Sem) 5. Automatic Scissor Lift Design for 1200 Kg Lifting strock 450 mm 6. Automatic trolley Design for Industries Application. 7. Moveable Turn table design speed 30m/min, Load carrying capacity 1700 kg

SUMMARY OF EXPERIENCE About Five years of experience across the industry, seeking challenging assignments with growth oriented Organization in Mechanical Engineering design sector. •... Read more

SUMMARY OF EXPERIENCE About Five years of experience across the industry, seeking challenging assignments with growth oriented Organization in Mechanical Engineering design sector. • Presently working as a Mechanical Design Engineer in B M Techno Machines Pvt. Ltd. Ahmedabad (Gujarat) - May 2015 to till date. • Worked as a Mechanical Cad Engineer in Cadd Centre Training Services Pvt. Ltd. (Jaipur)-Feb 2013 to April 2015. MAJOR COMPETENCIES AutoCAD, PTC- Creo, SolidWorks, Solid and Parametric modeling, Drafting, Detailing, Geometric Dimensioning & Tolerancing (GD&T), Analysis, Mechanism, Design Calculation, Proof Checking, DFx (DFM/DFA) methodologies, Animation, Rendering.

I am Mechanical Design Engineer having experience in Designing various types of Heavy Machinery (Defense Equipment, Nuclear Machines, Constriction Site Equipments) & Furnitures. I have good... Read more

I am Mechanical Design Engineer having experience in Designing various types of Heavy Machinery (Defense Equipment, Nuclear Machines, Constriction Site Equipments) & Furnitures. I have good knowledge in Autodesk Inventor, AutoCAD, Solidworks, Pro E, Creo, Catia.

I started in this industry as a Mechanical Engineer holding a Masters in Science (M.S) in Design from the University of Michigan, Ann Arbor, USA. My last position was of Senior Design Engineer in... Read more

I started in this industry as a Mechanical Engineer holding a Masters in Science (M.S) in Design from the University of Michigan, Ann Arbor, USA. My last position was of Senior Design Engineer in the Transportation Division in Molex, USA. I have worked on designing industrial products for over 7 years. I am proficient with 2D Drafting, 3D Modeling, Product design, computer-aided engineering, 3D printing, prototyping, and statistical root cause analysis. I also have a team under me who can support an end to end product development. I have experience of working with a team in the US, Germany, Korea, China, and India.

I have 3.5 years experience as a design Engineer. I can handle projects related 3D modelling, Drafting,Product Definition,Tolerance stackup analysis. Catia V5,Autodesk Inventor Read more

I have 3.5 years experience as a design Engineer. I can handle projects related 3D modelling, Drafting,Product Definition,Tolerance stackup analysis. Catia V5,Autodesk Inventor

Experienced Team Lead with a demonstrated history of working in various mechanical as well as automobile projects. Aspiring Product Design Engineer highly proficient in using various CAD software... Read more

Experienced Team Lead with a demonstrated history of working in various mechanical as well as automobile projects. Aspiring Product Design Engineer highly proficient in using various CAD software like SolidWorks. Ability to apply CAE skills effectively to evaluate the performance of components and optimize their designs. An excellent team player with organizational, communication, and presentation skills.