Hire Oil and Gas Designers in United States

Experienced engineer and Industry Specialist with 25+ years of development of mechanics, hydraulics, pneumatics, electronics. I can develop a device from screws to software. Be free to Ask me about... Read more

Experienced engineer and Industry Specialist with 25+ years of development of mechanics, hydraulics, pneumatics, electronics. I can develop a device from screws to software. Be free to Ask me about details. All the most popular systems such as AutiCAD, SolidWorks, Creo, etc. Khowledge of Mechanic, Hydraulic, Electronic and Software. Acceleration of 3D and 2D development for SolidWorks for typical products has been achieved, reducing the time from 4 days to 15 seconds due to VBA. Development areas: Oil and gas, instrumentation, underwater technology, medical technology.

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace,... Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries. Read more

Over 10 years of mechanical engineering and program management experience in the design and development of mechanical products in the Oil and Gas, Army Research, and Aerospace industries.

Mechanical Engineer with 18 years experience innovating electromechanical solutions in start-up and fortune 500 companies in the oil & gas, mining, modular construction, renewables & consumer... Read more

Mechanical Engineer with 18 years experience innovating electromechanical solutions in start-up and fortune 500 companies in the oil & gas, mining, modular construction, renewables & consumer product markets. Conceptualized and managed full life cycle programs ranging from $2 million to $10 million in budget. Core competencies include Engineering Design, Analysis, Project Management, Team Management, Prototyping, Testing, and Intellectual Property Creation.

I have performed a range of designs and devices related mostly to the oil and gas industry. Read more

I have performed a range of designs and devices related mostly to the oil and gas industry.

I am a Civil Designer with 18 years of experience with all types of land development projects and LEED accreditation. I have worked on projects all over the continental US and overseas in both the... Read more

I am a Civil Designer with 18 years of experience with all types of land development projects and LEED accreditation. I have worked on projects all over the continental US and overseas in both the land development and oil and gas industries.

I have owned and managed businesses in service, construction, and and retail sectors. I have experience in construction from design to completion. I have worked in the oil and gas industry... Read more

I have owned and managed businesses in service, construction, and and retail sectors. I have experience in construction from design to completion. I have worked in the oil and gas industry including operating midstream process equipment, drafting designs for oil and gas process equipment, piping, and vessels.

I have 20 years of experience as a tool and diemaker, mechanical designer, draftsman and CAD/Documentation Manager. I specialize in Mechanical Engineering using AutoCAD and Solidworks to bring... Read more

I have 20 years of experience as a tool and diemaker, mechanical designer, draftsman and CAD/Documentation Manager. I specialize in Mechanical Engineering using AutoCAD and Solidworks to bring ideas to reality. Whether it's the automotive, oil and gas, aerospace or fiber optic industry let me help your company reach it's highest potential. Whether it's 2D to 3D conversion, detail drawings, assemblies, bill of materials, design consulting or just large format scanning, I help you meet your goals.

I am successful in building quality relationship with clients on various oil and gas projects as a mechanical engineer and piping engineer with my skills in drafting, modeling and FEA analysis as... Read more

I am successful in building quality relationship with clients on various oil and gas projects as a mechanical engineer and piping engineer with my skills in drafting, modeling and FEA analysis as per industry code ASME B31.1, ASME B31.3, API 610, 650, 620 and WRC107. NEMA SM 23 etc. I am experience in modeling 3D piping, generating isometrics, and check pipe spec and bill of material.

My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a... Read more

My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic and control narratives for coke drum sequence control system, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system - SAUDI ELASTOMER PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic, cause and effect, control and safeguarding narratives of the whole EPC project, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system as a SENIOR INSTRUMENT & CONTROL ENGINEER - SOUTH PARS PHASEs (Phase 12, Phase 17 and 18) as an INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT: o Responsibilities: Principal detail design work for several related Demin water, waste water and polishing water units as a INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT. My skills can be summarized as in developing required detail instrument and control documents for EPC projects (Control narratives, C&E, S.G. Narrative, Logic, Index, Cable routing, etc., package or detail design review, design leadership and highly qualified in working with Autocad, and M.S. Office, programming and etc. The key strengths and achievement that I possess for success which make me very competitive candidate for the above position are as follows: • Receiving Award of Excellence of Year 2014 as the best instrument engineer in a reputable EPC Company, due to EPC project cost saving of more than 5,000,000 USD. • Leading package design works for more than 39 packages for SAUDI Elastomer project and more than 20 packages for OMAN SRIP project. Those packages include Utility boilers and water, air and oil utilities, several gas and air reciprocating and centrifugal compressors and etc. • Leading the design work for the Vibration monitoring and condition monitoring system of above projects • Developing the control and safeguarding narrative and logic works of SEP project (SAUDI Elastomer Project) • Leading the instrument database works for above projects • Being involved in various turbine control scenarios and I believe myself as a turbine control specialist. • Promotion from principal to senior to lead instrument engineer and finally to vice of deputy of engineering management in a process package vendor company within short period of time due to the high technical and leading skills • Leading detail design works of packages in vendor companies with variety of abilities including detail design, PLC programming and etc. • Leading and also carrying out the detail design, procurement and some parts of the constructions steps of more than four EPC process and utility units in Oil and Gas Industries worldwide as a vendor package detail designer and reviewer. • My strong analytical and forward looker mind, punctuality, perseverance, excellence and development seeking characters have led to more accurate, efficient and cost saving designs • Cost effectiveness along with better efficiency is one of the aims is being sought and I believe that engineering is a trade-off between the cost and the efficient design With a BS degree in Instrument and Control Engineering, I have a very good knowledge of process control and instrumentation, high leadership potential and energy levels, very strong analytical mind and deep detail-oriented skills, multitask handling abilities, responsible, creative and strong technical experience, very motive, super active and highly efficient and all this is owing to my educational backgrounds and absolutely my past experience in research then in detail design, then design review of small to enormous EPC project as well as conducting detail design leadership as a senior instrument and control engineer. Attached, you can find my resume for your kind consideration. I can be reached anytime via email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or my ▒▒▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I'm a long time drafter and designer who has worked in several industries, including oil and gas, turbo machinery, and packaged energy. I've worked for small companies and large, in various... Read more

I'm a long time drafter and designer who has worked in several industries, including oil and gas, turbo machinery, and packaged energy. I've worked for small companies and large, in various capacities. I've served as a senior designer for a Fortune 500 corporation and a lead designer for a small independent engineering design services company.

I have 25 years experience providing Cad and design services using AutoCad, Microstation, Revit, and Cadworx for plumbing, fire protection, irrigation, HVAC, electrical, strcutural, civil, oil and... Read more

I have 25 years experience providing Cad and design services using AutoCad, Microstation, Revit, and Cadworx for plumbing, fire protection, irrigation, HVAC, electrical, strcutural, civil, oil and gas, structural systems.

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater... Read more

American degreed mechanical engineer providing CAD services in mechanical, structural, and piping systems. Design area of practice include but not limited to Oil and Gas, HVAC, MEP, wastewater treatment, marine, automotive, machining, process piping, building & structural design.

Solis Engineering, LLC was formed in March 2018 by David Chavez-Fernandez and Ross Eldridge, with the goal of providing clients with quality electrical engineering designs and studies. While the... Read more

Solis Engineering, LLC was formed in March 2018 by David Chavez-Fernandez and Ross Eldridge, with the goal of providing clients with quality electrical engineering designs and studies. While the firm itself is relatively new, David and Ross combined have nearly 15 years of design and study experience in the following sectors: o Gas and Electric Utilities o Oil and Gas  Upstream  Midstream o Mining o Water Treatment o Data Center o General Commercial o General Industrial o Hospital/Life Safety

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical... Read more

Tripp graduated from Sam Houston State University with a B.S. in Industrial Technology with an emphasis in Design And Development. He worked 12 years in the Oil and Gas industry as a mechanical drafter and design engineer. He's held the titles of Designer, Drafter, Project Designer, and Sr. Designer. Tripp also serves on the School board in his community as the Board President. Tripp has been married for 20 years and though he and his wife have no children, they have two dogs and a cat that they consider their children. He enjoys taking his wife and dogs camping in their RV whenever he gets the chance.

Hi I am a BIM Coordinator at a structural engineering firm based in San Francisco. I have 9 years of drafting and 3D modeling expertise. I worked on everything from building liquid gas... Read more

Hi I am a BIM Coordinator at a structural engineering firm based in San Francisco. I have 9 years of drafting and 3D modeling expertise. I worked on everything from building liquid gas manufacturing plants for the oil and gas industries to working on a high rise hospital. My background is in Structure design but i've been in and out of MEP architecture design.

Over 25 years of experience working on time sensitive, critical path, highly confidential projects for industry leaders. Servicing Oil & Gas, Commercial, Industrial & Medical Industries. Product... Read more

Over 25 years of experience working on time sensitive, critical path, highly confidential projects for industry leaders. Servicing Oil & Gas, Commercial, Industrial & Medical Industries. Product Design & Development, 3D CAD Modeling, 2D Detailed Drawings and Assemblies, Proof of concept, Prototyping, Fabrication, Manufacturing, Construction, As Built, Simulation, FEA, Animation, Rendering, Bill of Materials, Material take-offs, Weight take-offs & Cost Management.

Versatile, Innovative, Patented and Published Engineer with extensive experience in Oil and Gas, Stress, Strain, ISO 9000, ASME I-IX, API, ANSI, NACE, DOT and more. I have avalable SolidWorks,... Read more

Versatile, Innovative, Patented and Published Engineer with extensive experience in Oil and Gas, Stress, Strain, ISO 9000, ASME I-IX, API, ANSI, NACE, DOT and more. I have avalable SolidWorks, Inventor and AutoCAD.

Mechanical Designer with over 27 years experience in mechanical drafting and design. I have worked in the Aerospace, Oil and Gas, and Industrial equipment industries for such companies as Tymco,... Read more

Mechanical Designer with over 27 years experience in mechanical drafting and design. I have worked in the Aerospace, Oil and Gas, and Industrial equipment industries for such companies as Tymco, Inc. (Waco, Tx), HydroTex Dynamics/BFI Pump Company, Weatherford, Inc., Schlumberger, Reed Tool, Oceaneering (OSS and OIE). I currently have 4 patent applications on file with Weatherford, Inc. I have recently started Mech-NeFx Design Solutions, LLC. which specializes in 3D design, 3D Rapid prototyping and mechanical drafting.

Mechanical Engineer with 7 years working for an equipment manufacturer popular in the oil and gas industry. I have extensive design experience 3d modeling and 2d drafting in various CAD platforms.... Read more

Mechanical Engineer with 7 years working for an equipment manufacturer popular in the oil and gas industry. I have extensive design experience 3d modeling and 2d drafting in various CAD platforms. I have been 3d printing as a hobby for the past couple of years as well. Feel free to check out my linkedin profile for more information. I am experienced and aside from design work I can also provide consultative services.

I have experience in the fields of microchip processing, electrical (industrial), and Mechanical (oil and gas). With my formal education in CAD applications I am able to provide professional... Read more

I have experience in the fields of microchip processing, electrical (industrial), and Mechanical (oil and gas). With my formal education in CAD applications I am able to provide professional standards at an efficient turn around time.

In my previous role as MSME, engineer, and manager with 30+ years of R&D involvement, I gained the knowledge and experience I need to hit the ground running and start making an immediate... Read more

In my previous role as MSME, engineer, and manager with 30+ years of R&D involvement, I gained the knowledge and experience I need to hit the ground running and start making an immediate contribution. The following are just a few highlights of my professional skills and achievements that I hope to bring to your company: • The adept user of most popular 2D and 3D CAD modeling applications (SolidWorks, CreO, Inventor, SolidEdge...) • FEA and CFD analyst with solid experience using several most widespread packages (Ansys, Abaqus, CFD, Fluent, IcePak…) • Team lead responsible for testing and analyzing the feasibility, design, and performance of equipment, components, and systems. • Project manager liable for the development, coordination and monitoring all aspect for several $10 million production projects, including a selection of manufacturing methods, fabrication, and operations of product designs. In addition to all the above, I possess experience in designing innovative complex equipment and possess the aptitude needed to work with abstract system design concepts.

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of... Read more

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of the areas of I&E Design, including basic knowledge of UL Industrial Control Panel fabrication standards for non-hazardous (UL 508A) and hazardous locations (UL 1203, 698A). Assist in conducting field audits and investigations of customer facilities and manufacturing plants. I try to identify opportunities for improvement and make constructive suggestions for change. Comply with company standard policies and procedures. I have experience and Technical Training in Instrument and Electrical Design for the Industrial, Commercial, Manufacturing, or Oil and Gas industries. iOccasional travel to client offices and construction sites will be required.

I'm Kris, I currently a multi role engineer focusing on Laser Cutting, Structural and Sheet Metal Welding, and Product Design. Welding is second nature to me as I've spent the last 10 years... Read more

I'm Kris, I currently a multi role engineer focusing on Laser Cutting, Structural and Sheet Metal Welding, and Product Design. Welding is second nature to me as I've spent the last 10 years perfecting and refining my practical weld ability. Parallel to the time I've spent welding, I've also spent time learning CNC Laser Cutting machines. From the repair to the operation of these machines. Most currently I've been learning under the guide of a more experienced engineer - the design process. This is where I get to combine all levels of experience to design things such as structural cat walks, welding fixtures, conveyors, phosphate holding and heating tanks, and multiple protective devices in the oil and gas industry.