Conversion of files from Sketchup to Revit
in
Architectural Design
held by
diego architetto
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
i need to transform some 3D stands, drawn with Sketchup, to proper Revit Architecture models, here there are some jpg for a preview. See this link for the file download: ow.ly/dyZSk
Wants:
skill, price, time, and previous experience, a proper use of families, and accuracy
Don't Wants:
i dont wont a model without quality. it is a simple geometry, but I need all the panels to be subdivided, etc
Software:
- Autodesk Revit (2012/2013)
Additional Information
<p>See this link to download the Sketchup file attachment <a href="http://ow.ly/dyZSk">http://ow.ly/dyZSk</a></p>
Entries
1st Winner
#2 Sketch To Revit Updated
by Hiren Patel
Download Files
#1 SketchUp To Revit
by Hiren Patel
Download Files
Discussion
Hi Priyanka
as explained on my last comment above, the stand or pavilion or booth, is just that one on the sketch-up model
It has just to be remodeled in Revit
the level of details at the moment is ok if it will be the same than in the model
with the level of detail relating to family, I mean that such ceilings should be identified with a specific truss which is obviously not one of the default standard Revit
should therefore be identified as a "cieling mdf panel". "mdf beam cieling." etc..
same for the walls
if you look at the model you can see That walls are subdivided vertically, etc..
just That
there are no specific model of windows to be parametric, etc..
the furnitures are quite simple, and that's ok, is not for an industrial production.
the glass of windows must be 1cm thick, but the detail of fixing is ok
I dont need the printing layout
just the proper 3D model ready for all my modifications, etc.
please let me know if this is ok for you
regards
diego
as explained on my last comment above, the stand or pavilion or booth, is just that one on the sketch-up model
It has just to be remodeled in Revit
the level of details at the moment is ok if it will be the same than in the model
with the level of detail relating to family, I mean that such ceilings should be identified with a specific truss which is obviously not one of the default standard Revit
should therefore be identified as a "cieling mdf panel". "mdf beam cieling." etc..
same for the walls
if you look at the model you can see That walls are subdivided vertically, etc..
just That
there are no specific model of windows to be parametric, etc..
the furnitures are quite simple, and that's ok, is not for an industrial production.
the glass of windows must be 1cm thick, but the detail of fixing is ok
I dont need the printing layout
just the proper 3D model ready for all my modifications, etc.
please let me know if this is ok for you
regards
diego
Mon, 17 Sep 2012 04:13:49 +0000
I have reviewed the sketch-up drawings and have a couple of questions regarding the same;
How may stands are there in total to be modeled?
How much detailing are we looking at? is the detailing level same as the sketch-up drawings or more than that?
the families have to parametric families?
How may stands are there in total to be modeled?
How much detailing are we looking at? is the detailing level same as the sketch-up drawings or more than that?
the families have to parametric families?
Buyer
Ok guys
I've just explained few more things to the cadcrowd people
hope everithing is ok now
probably there was a big misunderstanding in the drafting of the original text.
in Europe we use the word "stand" to indicate the temporary structure, office or shop, that we use to work in exhibitions.
in america I found that you are using the word "booth".
someone is using pavilion
I did not know completely until a few hours ago. Thats probably the mistake
what I would like the designers will do is this: take the 3d model that I provided (made in sketchup) and starting from the same geometry, using the metric system in cm or mm, rebuilding it completely in Revit. inserting the appropriate levels, etc.
If they need an idea of materials, the original one is made in lacquered Mdf panels. If they look properly at the geometry, they easily will see that it is made with proper mdf panels, etc.
following the original model you will find all the dimensions, etc.
I'm not asking for any proposal or ideas for other objects to put on it
Just the rebuilt of that model
Please let me know if this is 'sufficiently clear and if there's all you need to do.
I've just arranged 'to add 3 days to the contest
no more unfortunately
please let me know
ciao
diego
I've just explained few more things to the cadcrowd people
hope everithing is ok now
probably there was a big misunderstanding in the drafting of the original text.
in Europe we use the word "stand" to indicate the temporary structure, office or shop, that we use to work in exhibitions.
in america I found that you are using the word "booth".
someone is using pavilion
I did not know completely until a few hours ago. Thats probably the mistake
what I would like the designers will do is this: take the 3d model that I provided (made in sketchup) and starting from the same geometry, using the metric system in cm or mm, rebuilding it completely in Revit. inserting the appropriate levels, etc.
If they need an idea of materials, the original one is made in lacquered Mdf panels. If they look properly at the geometry, they easily will see that it is made with proper mdf panels, etc.
following the original model you will find all the dimensions, etc.
I'm not asking for any proposal or ideas for other objects to put on it
Just the rebuilt of that model
Please let me know if this is 'sufficiently clear and if there's all you need to do.
I've just arranged 'to add 3 days to the contest
no more unfortunately
please let me know
ciao
diego
Fri, 14 Sep 2012 02:04:10 +0000
Thank you for the details.
Buyer
the purpose is to check the service and have a real and proper feedback of how it is working
this "stand" has already been produced,
cause we moved from vectorworks and sketchup versus revit, lumion and cinema 4D and cause we are changing our approach to design production in my office. it is the first time that we are outsourcing drawings.
but in any case, on next week we are starting a new project based on this stand, cause of a new location, so what we need is a revit model in which we could work properly
starting from this 3D we are going to re-produce all the technical layout and renderings
so it must be detailed following the sketchup model
the geometry are not so complicated, but it is important to see how you are planning the levels, families, etc
contact me for any further question
ciao
this "stand" has already been produced,
cause we moved from vectorworks and sketchup versus revit, lumion and cinema 4D and cause we are changing our approach to design production in my office. it is the first time that we are outsourcing drawings.
but in any case, on next week we are starting a new project based on this stand, cause of a new location, so what we need is a revit model in which we could work properly
starting from this 3D we are going to re-produce all the technical layout and renderings
so it must be detailed following the sketchup model
the geometry are not so complicated, but it is important to see how you are planning the levels, families, etc
contact me for any further question
ciao
Thu, 13 Sep 2012 09:30:14 +0000
What is the purpose of the revit model.
Is it to build from.
Is it for renderings
Is it to give to another party eg convention organiser.
What output will be produced from the model.
What scales will output be produced at.
Is it to build from.
Is it for renderings
Is it to give to another party eg convention organiser.
What output will be produced from the model.
What scales will output be produced at.
Tue, 11 Sep 2012 12:56:33 +0000
Hi Sir. Yes the contest is ok. I am on progress. I will post as soon as it is finish.
Buyer
hey Guys... No feedback? no success? can you suggest to me if the contest is ok? thanks
Buyer
Okay, check this link to download the file attachment http://ow.ly/dyZSk Thanks!
Buyer
yes, sorry guys, there was a little problem with the upload that will be solved before night. sorry for that, but I'm going to put 3 more days to close the contest. bye
Fri, 07 Sep 2012 23:30:56 +0000
Hi Diego,
Could you please upload the input files that need to be converted to REVIT?
Thanks.
Could you please upload the input files that need to be converted to REVIT?
Thanks.
Fri, 07 Sep 2012 16:11:51 +0000
Hi Diego,
Could you please upload the Sketchup file that needs to be converted?
Thanks!
Could you please upload the Sketchup file that needs to be converted?
Thanks!
Similar Contests on Cad Crowd
Marvel Landscape
We live on a corner lot and need some help with a design and potentially some rendering of the back, side and front yard. We live in Colorado so some grass is important.
3D modelling of a great new residential complex
Hi folks,
we are conceiving construction projects. Right now we need a 3d model of our newest project
, that we are conceiving in Allplan 2013.
In particular we need a 3d model of the outside shell and one sample apartment.
These we will forward to a post-production artist who will inhale the photo-realism.
We do have all plans / floor plans in 2D ready.
We hope to find somebody who have fun dealing with 3D and participating in something bigger.
Residence 118sq meter - Architectural Freelancer for AutoCAD Floor Plan
Size is 118 meter square
1. Please draw the 2D floor plan of existing plan by CAD (scale 1/50) - 1 Set
2. Please draw the 2D interior elevation of existing plan by CAD (scale 1/50) - total 3 rooms = 3 Set
Oceanfront Restaurant Renovation Rendering
Need exterior 3D rendering for Hawaii restaurant renovation using provided files/floorplans
Structural Design and Break down of Material
hi i need a design as i am going to build a ' Walk In ' door on the back of a single family house with side railings and concrete steps.
diego architetto
Buyer