LA Apartments‎

in 3D Modeling Design held by Bert
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
Hi.
I urgently need to make the design and visualization of the apartmens.
We are ready to pay good amount if the designer/visualiser will work as long as you need.
We have a model of the building, I attached it to all files.
Also there is a small notes from us.
There will be 3 angles: the interior angle and two exterior images.
The notes are quite simple, but we want to see your ideas as a designer. The style is modern or minimalist. I would like to see cozy design as well as photorealistic visualization. We attached some images which will serve as a good example.

The time frame is very limited, the project should be with me by Friday evening 30.10.2015 after 13:00 (UTC+01:00).


Use common sense in the work.
Write in comments and private messages.

Good luck!
Wants:
The speed performance and high level of professional skills
Software:
  1. 3ds Max
  2. Autodesk Maya

Entries

= Buyer's Rating
1st Winner
#8 LA Apartments‎ by 3dsaltstudio
#3 WIP by zyrone levantino
Download Files
#5 LA_Apartament_V1 by ProtoTech Workbench
#6 EXTERIOR by quanghuy
#7 LA Aparament by ProtoTech Workbench
#9 EXTERIOR 2 by quanghuy
#10 LA apartments by zyrone levantino
#12 interior by vdcorporation

Discussion

Showing last 20 comments - View All
Fri, 30 Oct 2015 19:47:41 +0000
Hi,
I just finish my renders and would like to upload them for you anyway
is there any chance to send them to you?

Bert

Buyer

Fri, 30 Oct 2015 08:36:35 +0000
You have another 3 hours until completion of the project.

mikron

Designer

Thu, 29 Oct 2015 18:54:40 +0000
I would like to participate, I´ll send you a private message, interesting job!
Thu, 29 Oct 2015 17:05:45 +0000
Wip.
Thu, 29 Oct 2015 16:12:57 +0000
Ok Lucian, Sorry, if I district the law, this is my first time :)

zyrone levantino

Designer

Thu, 29 Oct 2015 16:03:07 +0000
Thank you sir, I am on it

Bert

Buyer

Thu, 29 Oct 2015 15:46:27 +0000
zyrone levantino
Maybe a little, but not much

zyrone levantino

Designer

Thu, 29 Oct 2015 15:42:14 +0000
We dont have to change the camera angle?

Bert

Buyer

Thu, 29 Oct 2015 15:25:18 +0000
Vladu11
Do as you see fit, but to be as informative as possible
Thu, 29 Oct 2015 15:12:15 +0000
Render Exterior - Night Time/Dusk Time, Lights on everywhere, right?
Render Interior - Night Time/Dusk Time, also with lights on, same thing?

Please confirm or advise otherwise. Thanks!

Bert

Buyer

Thu, 29 Oct 2015 08:43:08 +0000
You guys lose a lot of time wasted.
Tonight I&;ll announce the person who is in my opinion the most proactive and productive.
Everyone who is actively working on the project - waiting for your sketches in private messages.

Bert

Buyer

Thu, 29 Oct 2015 08:34:16 +0000
Cata
Yes
Thu, 29 Oct 2015 08:24:23 +0000
Hi Bert,
Do you want only 3 photorealistic renders of the house ? Am I corect ?

Lucian

Administrator

Thu, 29 Oct 2015 08:22:40 +0000
@Marylak Contact information cannot be exchanged on CAD Crowd, so please talk with the buyers only through CAD Crowd message system.

Bert

Buyer

Thu, 29 Oct 2015 08:20:53 +0000
Marylak
1. The date is specified in description.
2. To contact me you can in a private message.

Bert

Buyer

Thu, 29 Oct 2015 08:20:10 +0000
J.
read comments

Bert

Buyer

Thu, 29 Oct 2015 08:11:38 +0000
francisco_dp
You actually opened the file which I attached?!

Bert

Buyer

Thu, 29 Oct 2015 08:09:59 +0000
Joel
If you are able to do photorealistic renderings - you can use any software.
Thu, 29 Oct 2015 06:32:31 +0000
Hi Bert,
I&;m new in this website, but me and my team are ready to start from now. Just few questions:
1. Can we concentrate on a good exterior visualization till Friday and post pone the interior for after the weekend?
2. Is there common and possible to exchange email with you through a private way? if not please name me so I can follow your comment.

Thank you Mary

zyrone levantino

Designer

Thu, 29 Oct 2015 02:43:18 +0000
Hi Bert,

I would like to participate.

I will send you a private message about what type of work I am capable.

Thanks

Zyrone

Similar Contests on Cad Crowd

American Modern Twyst Plate Apparel Fastener
I am looking to create a new type of apparel fastener. The basic specifications that I am looking to achieve are as follows. The fastener consist of two parts 1. The Plate: (connected to a backpack for example) 2. The Disk (connected to a flashlight as an example... which inserts to the plate to create the fastening/lock) Plate Specs: 1. Size: no more than 17mm x 17mm with a depth of 2-2.5mm thick 2. Needs to be able to house a 12mm round (disk) that will fasten into it. 3. Pounds of pressure to insert disk: goal of 10lbs or less 4. Weight that it needs to be able to hold 100 lbs 5. Pounds of pressure to release disk, 10 lbs or less 6. Functionality: Ideally the fastening system would be push in with a 20-25 degree or less "twist" out. Needs to have the ability to "lock" (lock in this case means, not release so that the user can trust the fasteners ability to hold the objects that are attached to it and they will not fall off. 7. Ideally, the plate can accommodate the separation of the insertion force of the disk from the rotational force that allows the disk to release so that it can be placed on different weights of material. DISK 1. The disk can not exceed 12mm in diameter/size and needs to be 3mm (or less) in thickness. 2. The disk will be attached/mounted to a different object that will hold that object to the plate. 3. Ideally requires 20-25 degrees or less of rotation to release from the plate 4. Ideally it can accommodate a straight "snap in" insertion, or a "ski-binding" toe to heel or side to side snap in. A good concept to look at for inspiration is the clips bike peddle. MATERIALS: Open to anything USABILITY: Needs to be able to handle the wear and tear of at least 100,000 insertions and releases without losing its strength. MECHANISM: I am open to any form of mechanism including (but not limited to) electric, magnetic spring, rings, teeth, gears, pins etc. LOOK AND FEEL: Modern American style (think Apple), needs to have clean lines, nice smooth face, with a beveled edge etc. as It will be used on a fashion/apparel product. INSTALLATION: The design needs to consider how the factory will install both the plate and disk onto to their respective materials/accessory.
Robot Lawn Mower
I am looking for the industrial design of a robot lawn mower. I would like a product that looks distinctive. There are two main components, a robot and a base station. I imagine the robot to be around 12" x 12" x 8". The robot can dock with the base station. I like the idea of a white, orange, or black design, with the simple robot's logo image: http://www.simplerobots.com/blog/wp-content/uploads/2015/03/logo_inline.png Here are some robot mowers currently on the market: http://www.husqvarna.com/us/products/robotic-mowers/husqvarna-robotic-mowers-for-homeowners/ http://robomow.com/en-GB/product-category/mowers/ https://www.deere.com/en_INT/products/equipment/autonomous_mower/tango_e5/tango_e5.page I've attached an idea I had of what this may look like, but I'm sure you can do better. I will award the 1st place price ($1500) to the best overall idea that meets or only needs minor polish to meet all the requirements. I will award the 2nd place price ($500) to the best idea from an innovative and distinctiveness standpoint regardless of whether it meets the requirements. I will try to provide feedback as regularly as possible. I recommend starting with low fidelity ideas and getting feedback before refining them. Towards the end of the contest, I will run a survey with around 100 users. I would prefer SolidWorks 2015, but am willing to deal with another format for a great design or designer. This contest will be short. I understand if the final designs are a little rough as I expect to continue refining them (ideally with your help).
Semitrailer 40feet
3 axle`s capacity 50ton
Hotel
I need to make a project for architectural presentations. It will be a big hotel with a restaurant downstairs. You need to make the exterior and to fit it into a high backdrop (in the file you'll find the perfect example) You also need to simulate the building schematically, which is located near the hotel which doesn't require precise detailing, just need to do as the picture which you will find in the files. In the background should see the intersection. The view of the building I pointed out. The answers to all the questions you can find in the files, there all is described very detailed. As the project is big enough and high fees, I wish it was the work of a team of 3D artists. I need to get the final version of the project on 14 November in the evening. (Sweden time)
ATG's Automotive Concepts 2016
Amani Technology Group, LLC (ATG) is an automobile company that designs and produces luxury electric vehicles. ATG will be having a design contest that will be related to the conceptual phase of two luxury electric vehicles that will be futuristic and will use 100% electrical power. The company will need sketches to be displayed in computer aided design (CAD) and graphics software. The sketches or perspective views will show the vehicle's exterior (car's body). The two concepts will be a luxury 4-door sedan and luxury 2-door coupe and will compete in the markets with automobiles like the Mercedes Benz S550 and the Mercedes Benz SL Class 2-door coupe. The designers in the contest will be using existing photos and renderings of the luxury 2-door coupe to develop the new perspective views of the vehicles.