FlowBand - Band for neuromarketing

in 3D Modeling Design held by Michał
Contest Closed
  • Open
  • Choosing Finalist
  • Ended
Description:
Hi, I'm Michael and I stand at the head of the team that designs the band used to study customer satisfaction.

We need a unique design for our product.
Wants:
I am attaching a temporary scheme with all my current criteria and some inspiration. (and our theme, logo)
Don't Wants:
Undefined - your imagination is the limit.

I will have some offer fr winner.. :)
Software:
  1. use software which is convinient for you
Additional Information
ACHTUNG ACHTUNG ACHTUNG!!!

I changed the rules. And money. :) But it is max i can pay, so if you think that's not enough, dont waste your time ;)

1. Please post all project on the white background - we want to compare all projects

2. Electrodes can be more convex and smaller

3. All characters should be embossed

4. And remember - band should take a form of the closed ring! :)

Look at the inspiration below: WWW.MYFEEL.CO

All my criteria in attachment below. PREVIOUS SPECIFICATION IS OUTDATED!!!
mcholszewski@gmail.com is my email

Entries

= Buyer's Rating
#17 Flow Band by Andri Oinam
#16 By Stelios by Stelios
#15 By Stelios by Stelios
#14 By Stelios by Stelios
#13 FlowBand Concept Designs by Jinen Sheth
#12 Flow Band by Mahbub
#11 Flowband - Neuromarketing by Rizaldy Hakim Ash S.
#10 FlowBand Revision 03 by Blue Ridge Drafting
#8 Band bracelet by bkcad
#6 FlowBand Concept Designs by Jinen Sheth
#5 Flow Wristband Monitor Project Version 01 by Blue Ridge Drafting
#4 FLOWBAND REV3 by Michael Dimou
#3 FlowBand by Aminegn
#2 FLOWBAND REV2 by Michael Dimou
#1 FLOWBAND REV1 by Michael Dimou

Discussion

Showing last 20 comments - View All
Sun, 05 Feb 2017 01:05:47 +0000
CadCrowd needs to filter these idiots so nobody is wasting time.
Sun, 22 Jan 2017 14:40:29 +0000
Hello Michał

Did you choose a winner?
Can I still participate in the contest?
Sun, 22 Jan 2017 12:31:34 +0000
is the contest still open?
pls let me know
Sat, 21 Jan 2017 09:57:48 +0000
Hi bravo,
I think it is necessary to multiply the price not to divide !!
;)
Wed, 18 Jan 2017 09:50:49 +0000
how i get the flowband logo?
Fri, 13 Jan 2017 13:24:53 +0000
In my opinion, to get better results, quality, quantity and great design depends on prepaid or pending payment.
I think prepaid will helps you alot.
Fri, 13 Jan 2017 13:12:57 +0000
Why don&;t you seperate the money, USD640 divide 3 or 5, and make contests with different requirement. So no need to change requirement.
Fri, 13 Jan 2017 13:09:08 +0000
Hi Michael,
Is it still open for submission? How about the winner you already mention?
I think better you make it clear since you already mention who won and also the requirement are different as before, is it means will have more than one winner for earlier requirement and now?
Wed, 11 Jan 2017 18:37:11 +0000
So why haven&;t you prepaid ? Not to mention you have already said who has won but not closed the contest and awarded that person this 640 ? I wasn&;t aware I accused you of anything. Also lawyers don&;t accept payment pending. Good luck with your contest.

Michał

Buyer

Wed, 11 Jan 2017 17:28:23 +0000
Dear ODBDesign.

I DO NOT use submitted projects. In accordance with copyright laws and intellectual property protection, i have NO COPY on my computer, smartphone and any other data carriers.

Quality of presented projects doesn&;t satisfy me, that&;s all.

If you&;ll still acusse me of stealing, I&;ll take appropriate legal action against you

Michal
Wed, 11 Jan 2017 17:10:41 +0000
#banpaymentpending
Wed, 11 Jan 2017 17:10:02 +0000
He doesn&;t need to prepay, he already has what he needs for free !
Wed, 11 Jan 2017 03:35:01 +0000
Prepay the contest
Tue, 10 Jan 2017 21:24:06 +0000
Hi Michal,
Thanks for the detailed info. Working on it now.

Michał

Buyer

Tue, 10 Jan 2017 09:11:15 +0000
ms12shah - yes

Michał

Buyer

Tue, 10 Jan 2017 09:11:12 +0000
ms12shah - yes
Tue, 10 Jan 2017 08:48:52 +0000
Hi Michale

so is it open for new submissions?

Michał

Buyer

Sun, 08 Jan 2017 23:00:46 +0000
bkcad yup, its a contest ;)
Sun, 08 Jan 2017 16:39:01 +0000
Congratulations Amine !

bkcad

Designer

Sun, 08 Jan 2017 15:48:35 +0000
can we still send our work ?

Similar Contests on Cad Crowd

Revolutionary Meditation Bench
A standard meditation bench made of wood gets a makeover. We are looking to create a fully-adjustable, lightweight, travel version of a wooden meditation bench for manufacture via injection molding (plastic). Here is a reference for what it usually looks like (not what we are making): http://www.samadhicushions.com/Meditation-Bench-Seiza-Kneeling-Bench-p/C-564.htm?Click=9556 The bench consists of 2 legs, of the same size, 7.5 inches tall. Atop is a main sitting piece, which is at right angles to the legs and is 18 inches long and 7 inches deep. All parts are ½ inch thick, or thinner. The bench needs to be able to support the weight of an adult. The main sitting piece (piece “A” in the sketch) needs to be rotational such that it can be tilted forward in order to create an angled seating platform. This adjustment is to conform to the seating angle of the meditator to create comfortable sitting position. The piece must lock out once in place at the desired setting, in order to provide stability while sitting on it (aka it does not move). The legs must also be retractable, such that they fold in towards the main sitting piece in some manner, in order to make the bench small and practical for travelling or storage. When folded, teethe assembly should ideally be no more than 1 inch thick.
Motorcycle Design
Complete a motorcycle model based on the provided design with changes.
Fork/spoon set for children
Looking to release a children’s fork/spoon set that complements our brand's existing range of dinnerware products. The fork/spoon set should also come with a case so that they can be taken outside the home. It should be cute but stylish - something that a parent would be OK with (even proud) to leave out on the table if they had visitors. Brand aesthetics: Refer to our Instagram @wemightbetiny Website: www.wemightbetiny.com.au Target audience: - 18-45 year old mothers with an eye for design, who are willing to pay for unique and quality products What is the style aesthetic: - Scandinavian-inspired - Minimalist, simple, understated - Playful, cute
Smart Hub Enclosure Design
We control how power flows through your home. This device, a hub device, orchestrator, controller, manager, is a small electronic appliance will sit on the table or bookcase in homes. It functions similarly to a home automation hub (e.g. Smart Things, Wink, etc.), but is smarter than a hub. It connects to smart meters, home Z-wave automation equipment, Wi-Fi networks and Ethernet. When you’re using too much power, it throttles back your home’s usage. When more power is available, it throttles usage back up. It needs to look good, look modern, simple but elegant. We’re trying to exude confidence, control, action, durability. It needs to fit in with a modern home and look good. Attached are model files of that include the minimum features of the circuit boards and connectors. Also included are drawings of the components included on the circuit boards as well as additional pictures/descriptions of the circuit board stack. Start with the “Enclosure Presentation” file and go from there. IMPORTANT NOTE: The bottom circuit board component/connector placement is fixed (cannot be moved/altered). The top circuit board model file currently shows 4 LEDs. These LEDs indicate system status for Wi-Fi/Ethernet Network, Smart Meter Connection, Z-Wave Device Connection and Cloud Connection. This configuration may be changed and we expect it to change, multiple colors and/or other arrangements may be used, but we must be able to at least indicate status for these 4 systems. It would be nice to indicate, in addition to blinking status for example, motion or activity in the system. The design does NOT have to have draft built into the model for the contest, but the designer must be able to add draft (for additional fee) after the prototype has been approved. Think about how this would/could be molded when designing. The output will be 3D Generic CAD files (i.e. step files) + Native 3D CAD.
Donkey Calf Raise attachment (UPDATE)
This contest is to update the current design to connect and disconnect the Donkey Calf Raise attachment to various size smith machine barbell shafts. The Donkey Calf Raise attachment is a patented apparatus that can be attached to the smith machine barbell to perform the Donkey Calf Raise exercise. The current design will attach to all smith machine barbell shafts 25mm to 35mm. However, there are currently too many components that make up the design. I need a new design that will be easier to manufacture. The new design should have a quick way to connect and disconnect the apparatus to a 25mm to 35mm diameter smith machine barbell shaft. The connecting and disconnecting method should be durable to withstand constant use. The device should be able to handle 1200 pounds. Please see the attached 3D STEP file, Inventor assembly & part files. Attached also are images on how to perform the Donkey Calf Raise exercise.