Headphone Redesign Blind

A retractable tether from a belt clip that easily attaches to the back of any cell phone. - Tether should be 42" long. - Tether housing clips to belt. - Opposite end of tether attaches to back of cell phone by either strong suction cup or strong Velcro with plastic teeth to handle repeated detaching and attaching. - Tether needs to be able to lock in position at any length like a tape measure. - Tether housing should have 3 different mini clips on it. One on the lower face so the back of the cell phone attachment can hook to the tether housing. One on each side or the tether housing for hanging a key or a bluetooth devise. Take the basic key back or badge holder

We are looking to redesign the front cover only of our housing. The cover should keep the same dimensions so it still snaps into and works with the back housing. The back housing will be an industrial white. The front housing will be clear. See the sketch concept (MRX design version 2 - Setra file) file to see what we are moving to. We want to move away from the curved look of the front cover in favor of a flat face with a bezel (see the BAPI product for inspiration). The sticker label will have a rectangle cutout where a new, larger backlit display will be featured. The sticker will have a slight industrial texture to it. Please note we are considering adding a blue LED inside the housing to illuminate the clear edges of the front cover housing. Please try to mockup up the product with and without a blue light glow. Please also have a backlight effect on the display. All entries should be on a white or transparent background. Attached are current CAD files. Note the front cover will now have a flat face, the back housing will not change except for the color which will be safety/industrial white. Also attached are images of our current product (the MRX) and competitor products. We like the BAPI design the best. One final note, we also wanted to change the locking hinge to have more of a rounded shape instead of the squared shape. We also want to add a small hole in the latch (and a new hole in the back housing) for a small cotter key type lock or set screw. Thanks and I am happy to provide clarification.

Hello I am a student in need of serious help with a can crusher design will pay and need it done right away

Hello and thank you for viewing our project, We need a scaled, hi resolution, photo realistic renderings of our three structures which are different sizes. We need a working model which will allow each component to be manipulated for color, material or surface printing. Each structure and components will be $300 for first place. There will be 3 projects total.

This gadget is for arm to arm combat, for military use. It is a Carbon Dioxide powered punching tool that will dispense its gas load into the recipient of the punch. James Bond would have one of these discreetly hidden for any unexpected fight :) The 25 gram CO2 gas canister is housed in a metal sleeve that is held in the palm of the hand, there is a hollow blade that protrudes out between the middle fingers that dispenses the gas. The finish can be stainless steel, aluminum, cold steel, anything that looks good. The arrow head is interchangeable. The canister is pierced by a hollow pin on the top of the inside vessel. If this could be 3D printed that would be great.