Bathroom RemodelBlind

We are SINAN Real-Estate company that was established in 2011 and has become one of the successful companies in the real-estate development field where we have multiple projects all over the kingdom of Saudi Arabia. However, we would like to have a modern, outstanding and sustainable design for the following: - Design for mock up unit "living room and master bed room and bathroom and Majlis( guest room)" - Design for the corridor - Design for the reception - Design for the lounge - Design for the entrance area of the basement Note: If you have experience in hardscape and landscape we can discuss this issue. Moreover, it is a residential project that have 47 apartments which will have the same or similar design of the chosen one Best regards, SINAN Real Estate

Hello, We are looking to replace this hood in an island, with something flush with the ceiling. We'd like an encasement, low profile with a modern design around. The hood vent is 36". We will use a low profile vent and there is space in the ceiling. I would expect the encasement would be less than 1' in length coming down from the cieling. Looking for a nice modern design in the encasement. Please provide a rendering and instructions on building.

This is the plan of 2 apartments above each other in Belgium that we would like to renovate to a contemporary/modern finish - open floor plan. The ground floor is currently a 1 bed 1 bathroom apartment. We want to sacrifice the garage for 50% to allow for an extra bed and bathroom. The other 50% of the garage will become a place to store the bicycles for the ground floor and 1st floor. The 1st floor is currently a 2 bed 1 bathroom apartment. We want to sacrifice the current kitchen to allow for an extra bedroom and the technical room for a jack-and-jill bathroom. Our idea is to integrate the kitchen in the living room.

Looking for recommended furniture models, pattern, and decors for our new condo. The "Desired layout" attachment overviews the intended functions for each room.

Hello, I am a trained chef living and working in Kuwait. I have an interest in design and I am finally opening my first restaurant. I have overseen the design and construction of several restaurants for the company that I work for over the past few years and it's finally time for me to build my own. For this phase of this job, I am only looking for a layout/spatial planning/floor plan in 2D and 3D for the dining room and mezzanine of my space. I would also like the 2D floor plan to include furniture placement and spacing. I have already completed the layout of the kitchen which I wish to remain mostly unchanged although I did notice an area or two that are using more space than what is absolutely required and may be adjusted (dish wash and prep area to the right of the dish wash, only 90cm walkway space required between equipments) The space is actually 4 units that will be joined into 1 big space. The first 3 units starting from the left, (lets call these units 1-3) are 50sqm each. 10m x 5m. The fourth unit, (lets call this unit 4) on the right side, is 7.95 x 6.85. This brings the total SqM to around 204. The landlord will allow for a 50% mezzanine to be built. The layout will be up to me as the tenant to design and build, as long as the area does not exceed 50% of the ground floor area. This means I can build a mezzanine of around 102 SqM. Unit 4 overlooks an internal courtyard directly in front of it, which will have additional seating, so the wall with the door will be glass. The position of this door may be shifted left. What I need: 1. Several options of ground floor and mezzanine general layouts in terms of the positioning of the bar, the location of the stairs leading up to the mezzanine. My instinct is telling me to place the stairs directly to the left of the front door, which will require the bar to be pushed up a bit. 2. I need to include a small pocket style bathroom underneath the stairs if possible. If this is not possible, leave the bathroom out of the plan. 3. On the mezzanine, I need to include a small office, a conference room, and two private dining rooms that can be closed off or opened to each other to create one larger room when needed. Part of or all of the mezzanine should be open and overlooking the ground floor. 4. As far as furniture, in unit 1, the hot kitchen will have a 3m window opening onto unit 2. If the bar is moved from this area, the wall underneath this window on the dining room side, should be lined with cabinets with a marble counter 40cm deep. The rest of the furniture I would like to see a mix of bench seating along the walls, loose tables and chairs, maybe even 3 or 4 bar height tables. Please note the positioning of the front door in unit 3 may be moved.