Resin Viking/Norse Mythology Themed MugBlind

in Homeware Design held by Drazen
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
We are looking to make Viking/Norse Mythology-themed resin mug.

Outside is designed resin, and inside is stainless steel insert.

Mug volume/capacity is: 600-650ml

Dimensions:
- Width including handle approx.: 15.5cm
- Height approx: 14cm - 15cm

3D file format requirements: .stp

We will attach a few examples.
Wants:
A Nordic-inspired design.
Don't Wants:
No Horns in Design
Additional Information
Update to the capacity of stainless steel insert: 550ml;
Size:
- Diameter: 10cm
- Height: 14.2cm

Entries

= Buyer's Rating
#2 Viking Mug Design 1 by Sven Ebens
#30 Norse Mug Altered by Royprasun
#9 Norse Mug by Royprasun
#24 Nine Worlds Vegvisir Axe Mug by arnolddelange
#23 Mügjnir 2.0 / Viking Mug by Rudolf
#11 Viking Themed Mug by MohamedBz
#4 Viking Mug Concept 2 by KND_design
#32 Simple Vikings Mug by rishir
#33 NorseMug by sunilb2
#34 Resin Viking Norse Mythology Themed Mug 3 by Vimalgeorge10
#27 Valahala Mug by amans6
Declined
#41 Viking Mug Design 1.1 (updated neck with runes) by Sven Ebens
#5 Viking Themed Mug by akrammetar
Declined
#6 Viking Theme Mug by MohamedBz
Declined
#1 Mug-3D Modal by pawankumarp
#21 Mügjnir / Viking Mug by Rudolf
#18 VIKING MUG by yudhoterial
#17 Viking Mug 3.1 by KND_design
#16 TASA VIKINGO by Esmerlinstarling
#12 Resin Viking/Norse Mythology Themed Mug by SHIV_PRAKASH
Declined

Discussion

Royprasun

Designer

Wed, 13 Jul 2022 13:43:20 +0000
This wait is killing me 😭!!! Choose a winner already 🤞

MohamedBz

Designer

Wed, 29 Jun 2022 11:41:08 +0000
Okay, thanks for clarifying.
Tue, 28 Jun 2022 11:06:20 +0000
hi, I would like to ask, will you use this model in the game? Thanks for earlier
Sat, 25 Jun 2022 11:31:24 +0000
Hi Drazen,
One thing I want to know, Is the theme of the viking is only showing in front of mug or also on back side?

Regards,

Navtej

pawankumarp

Designer

Sat, 25 Jun 2022 01:46:49 +0000
I will try to update

Drazen

Buyer

Fri, 24 Jun 2022 18:21:33 +0000
@MohamedBz - Not, it is not double. Capacity of stainless steel is 550ml. The most important part is design, production team will manually adjust the design.

MohamedBz

Designer

Fri, 24 Jun 2022 18:09:38 +0000
The 10cm diameter and 14.2cm of height will double the desired capacity, it&;s equal around 1100ml ! Isn&;t it ?

Drazen

Buyer

Fri, 24 Jun 2022 08:06:23 +0000
@Sven Ebens - Stainless steel insert dimensions: Diameter 10cm and Height is 14.2cm, Capacity is 550ML

Drazen

Buyer

Fri, 24 Jun 2022 07:49:17 +0000
@Ovo First we will make a 3D mold for the sample, then worker will process manually each mug. You just have to make a 3D design, everything else will be taken care of by the production team.

Sven Ebens

Designer

Thu, 23 Jun 2022 20:24:08 +0000
Does the stainless steel insert have set dimensions / is it already available or does it need to be manufactured as well?
In other words can/should we vary it&;s dimensions (inner/outer diameter, height any chamfered/bevelled edges) as long as it&;s volume/capacity stays within the given parameters (600-650mL)?

OvO

Thu, 23 Jun 2022 19:58:06 +0000
How will you manufacture it?
3d printing, casting, or machining?

Similar Contests on Cad Crowd

3D Printer Design
We are an early stage 3D printing startup looking for a concept to use in our pitch deck. There will likely be continued work opportunities with the winner. ------------------------------------------------------------------------------------------ Style: Sleek and minimalistic. No screen, just a power button. You can go for an ultra-modern design (apple) or a retro-futuristic 50's design (Jetson's TV show). Use the color scheme in the attached company logo. ------------------------------------------------------------------------------------------ Dimensions: **Print area must be 300mm wide by 200mm deep by 200 mm tall. **There needs to be an extra .02 cubic meters of room for electronics and other components either beneath the print area or behind it. -------------------------------------------------------------------------------------------- Other: **The front, right, and left sides should be all or mostly gray acrylic glass. Everything else should be solid. (leave the top 70mm solid to hide the extruder and motors) **Modeling motors and extruder is not necessary! **The print bed must move up and down so it needs one screw and two guiding rods behind it. (see attached picture) **Include the company logo somewhere on the printer.
Kitchen Waste Rack
Purpose is to make this an injection molded plastic item. Looking to get some CAD designs that include the core structures, which are: (a) precise top loop [that holds a slightly stretched plastic garbage bag], loop cutout is preferred, but optional if necessary. Loop Circumference: 28.5 inches. Can be irregular shape.; (b) bottom holder to support bag contents and hold roll of bags with some dispensing assistance to keep roll in center; and (c) a vertical component to maintain the precise distance from top and bottom components. Height 15.25 Inches; (d) two side hooks that hold a shopping bag in lieu of fitted bag. - The top and bottom can have individual mounting via 3-4 mm screws. - The unit would be best as a 2-3 piece construction for smaller shipping /retail box. - item must support appx 15 lbs distributed through top ring and bottom support. - reference www.extrufix.com for info and watch installation video for product views. - My sketches of a potential design are attached: "Sketch_1" and "Sketch_2". This is provided as an example only. - current, actual retail product designs attached: 2 wire plans and 1 retail package artwork. Other current product images and drawings are attached. Note: our company is interested in selling garbage bags that fit the rack. This is the critical mission. The shopping bag hooks are a minor feature that we include for a minority of our users.
Ice Pack Designs
Need unique designs in various sizes for ice packs. Small – .75lbs – 4.25″ x 6.25″ x 1.25″ Medium – 1.5lbs – 6.75″ x 7.75″ x 1.25″ Large – 2.5lbs – 7.5″ x 9.5″ x 1.25″ Extra Large – 5lbs – 10.925″ x 8.661″ x 1.85″
Mompreneur needs 3D Drawings to rid the world of boring highchairs!
Our mission is to rid the world of boring highchairs & messy cleanups, one meal at a time! I need 3D drawings of two different styles of placemats that will custom fit the world’s most popular high chair – the IKEA Antilop high chair. They’ll be made from silicone FDA approved food-grade silicone. The drawings will assist with create product moulds in China. See attached file for dimensions - although I'd prefer to work with someone who has this exact high chair in their home (as it's difficult to communicate dimensions of edges and corners). Would also like to letterpress logo into design (see attached for example).
Pot plate
Looking for nice design and shape for a flat metal surface that can rest on top of a slow cooker with space for the top handle. See attached picture below, of a slow cooker pot. It may need to look similar to a graduation hat, so the bottom can fit over the handle that pops up in the middle but the top will be flat.