Pot plateBlind

in Homeware Design held by efraimr
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
Description:
Looking for nice design and shape for a flat metal surface that can rest on top of a slow cooker with space for the top handle. See attached picture below, of a slow cooker pot.
It may need to look similar to a graduation hat, so the bottom can fit over the handle that pops up in the middle but the top will be flat.
Wants:
Aluminum heat conducting material, top needs to be flat surface, that can rest on top of a pot.
Additional Information
Flat top of pan should be size 9 x 26"

Entries

= Buyer's Rating
1st Winner
#19 Pot plate design by ahmadnazree
#22 pot plate flat by gopinathg
Download Files
#20 Pot plate design by ahmadnazree
#17 Pot Plate by sherifelsheikh
#16 Universal Pot Plate R0 by Indranil_Routh
#14 Slow cooker pan by engrmaaz
#1 CROCK_TOP 8-QURT by manojd
#11 Entry 2 by haitham
#10 pan by engrmaaz
#9 Model1 by haitham
#8 Pot Plate by Adam West
#4 Flat by ddrdesign
Download Files
#2 Flat cover by Albatros
Download Files

Discussion

Sat, 17 Jun 2023 18:08:40 +0000
efraimr, acquiring the internal dimensions/geometry of various slow cookers - even if restricted to the classic Crockpot elliptic cylinder volume - requires physical access to a variety of slow cookers for the taking of physical measurements and/or scanning. Internal dimensions - other than volume - are not available from e-commerce listings.

Unrelated, do you want this warming shelf (from your comments, that&;s what I infer the product to be) to fit different SHAPES of slow-cookers? In other words, both round and elliptic cylinders?

efraimr

Buyer

Wed, 14 Jun 2023 16:11:26 +0000
Everyone keeps asking for dimensions, If you read my reply, I put a link to a slow cooker, you can look up the dimensions, I also want the plate on top to fit universally to different size slow cookers, so maybe it should rest on the dome cover

efraimr

Buyer

Wed, 14 Jun 2023 16:10:17 +0000
The purpose of the flat surface is to keep food warm, with the heat from the slow cooker on bottom
Wed, 14 Jun 2023 15:21:20 +0000
What is purpose of the flat top surface...do you want to put something above that..? if you mention the purpose..it will helpful in bringing out robust design
Also the top handle should be open right?

engrmaaz

Designer

Wed, 14 Jun 2023 12:08:48 +0000
kindly give a response on the submitted entries so we will know the requirements, thanks

vitaliis1

Designer

Wed, 14 Jun 2023 07:20:37 +0000
Is the number of polygons important

engrmaaz

Designer

Wed, 14 Jun 2023 07:09:33 +0000
kindly explain 9x 26&;&; is the height/depth and dia/ width of the pan.
Wed, 14 Jun 2023 06:15:32 +0000
Hey. So from what i understand, you want us to design a plate which is located between the pot and the pot lid in the picture you provided for us? If so, please indicate it with an arrow or something in the picture, if possible. Because from what i see there and from what i saw in similar products, it doesn&;t look like a graduation hat at all. You could also add dimensions in the picture for maximum clarity rather than writing them in the description.

efraimr

Buyer

Wed, 14 Jun 2023 04:49:20 +0000
Please look at this link for dimensions

https://crockpot.co.uk/products/CSC085X/

but it should be able to fit multiple size slow cookers
Wed, 14 Jun 2023 01:29:06 +0000
Plz, Provide me dimensions,This type of work already done by me on other site. You can believe me.
Wed, 14 Jun 2023 00:23:57 +0000
+14408806487 WhatsApp
Tue, 13 Jun 2023 23:51:04 +0000
Could you please share the availability if the pot dimensions, so that we can plan for the plate design
please ask for any?
Thanks

manojd

Designer

Tue, 13 Jun 2023 22:43:14 +0000
how to uplode?
Tue, 13 Jun 2023 22:08:24 +0000
hi sir
kindly provide me with dimensions, and we will procced

manojd

Designer

Tue, 13 Jun 2023 21:00:30 +0000
Hi is there any dimension available

efraimr

Buyer

Tue, 13 Jun 2023 18:18:31 +0000
You can lookup slow cookers size 6,7 and 8 quart size. pan should be universal so it can adjust or rest stable on any size, the bottom should be able to rest even and flat on top of any slow cooker

Albatros

Designer

Tue, 13 Jun 2023 16:41:44 +0000
HI

What are the dimensions (diameter ) of the pot and the depth, (height of the top handle?

Similar Contests on Cad Crowd

Mompreneur needs 3D Drawings to rid the world of boring highchairs!
Our mission is to rid the world of boring highchairs & messy cleanups, one meal at a time! I need 3D drawings of two different styles of placemats that will custom fit the world’s most popular high chair – the IKEA Antilop high chair. They’ll be made from silicone FDA approved food-grade silicone. The drawings will assist with create product moulds in China. See attached file for dimensions - although I'd prefer to work with someone who has this exact high chair in their home (as it's difficult to communicate dimensions of edges and corners). Would also like to letterpress logo into design (see attached for example).
New Pizza Slicer
we have created a new pizza slicer. This is a base wood board like a bread board with aa attached wire frame slicer which will cut the pizza into 8 slices like a cheese slicer. I attach a drawing of the product and require a realistic picture of the product which we can use to do some further market research to receive comments on the product and registration for future information on the product when launched. This is a very small project which should require no more that 2 hours drawing. Hopefully there will be further projects as the product is fianlised and produced.
Rule 406
Rule 406 is simple, if it exists, you can drink from it! Every object can be made into a container that can hold drinks and by every object, we mean EVERY object. If you can think about it, we can make it! We exist to make custom drink-wares for parties and themed events. This campaign is about nailing down a brand design that can be recognizable with all our products. Here is what we want: 1. Big object design: We've attached a picture of a Lamborghini Aventador, we want you to design a life sized plastic model (Preferably transparent) that will be filled with beer and have several outlets to get drinks out. 2. Small object design: We've attached a picture of a beats headset, we want you to design a life size plastic model (Preferably transparent) that one can drink from (Doesnt need to be wireless). Once we love your design, we will continue to work with you for up to 25 additional models and a solid logo.
3D Printer Design
We are an early stage 3D printing startup looking for a concept to use in our pitch deck. There will likely be continued work opportunities with the winner. ------------------------------------------------------------------------------------------ Style: Sleek and minimalistic. No screen, just a power button. You can go for an ultra-modern design (apple) or a retro-futuristic 50's design (Jetson's TV show). Use the color scheme in the attached company logo. ------------------------------------------------------------------------------------------ Dimensions: **Print area must be 300mm wide by 200mm deep by 200 mm tall. **There needs to be an extra .02 cubic meters of room for electronics and other components either beneath the print area or behind it. -------------------------------------------------------------------------------------------- Other: **The front, right, and left sides should be all or mostly gray acrylic glass. Everything else should be solid. (leave the top 70mm solid to hide the extruder and motors) **Modeling motors and extruder is not necessary! **The print bed must move up and down so it needs one screw and two guiding rods behind it. (see attached picture) **Include the company logo somewhere on the printer.
Resin Viking/Norse Mythology Themed Mug
We are looking to make Viking/Norse Mythology-themed resin mug. Outside is designed resin, and inside is stainless steel insert. Mug volume/capacity is: 600-650ml Dimensions: - Width including handle approx.: 15.5cm - Height approx: 14cm - 15cm 3D file format requirements: .stp We will attach a few examples.