Modern and innovative cat tower
in
Product Design
held by
Bstessia
Last seen:
Contest Ended, Winner(s) have been selected.
-
Open
-
Choosing Finalist
-
Ended
Description:
We are a small start up business focusing on bringing the outdoors inside for indoor cats. Indoor cats like to climb and feel safe when selecting a preferred level to perch at. Indoor cats like their outdoor cousins, need exercise, plants (especially grass) and access to view out of windows to keep them stimulated. If the cats requirements aren't enough of a challenge then the winning design must fit seamlessly with the ultra modern home interior. We invite you to submit your designs based upon shelves fitted to the ikea stolmen post, a floating shelf design or your own unique concept. Your design may be cat centric or multi purpose for both cat and pet parent.
Wants:
You will need to submit both .dwg files and .pdf files.Preference will be given to designs that can be sized for small medium and large options.
Designs will be fabricated from mdf Cnc machine cutting so please maximise cut from sheet and minimise waste.
Consideration will be given to designs to be fabricated from hardwood
For cat safety all fixings must be interior with no viewable screws, dowels etc
Design must incorporate fitting options for toys, plants which can be purchased as optional extras without detracting from the design if these options are not purchased.
All designs must incorporate bed/perch area and scratching section
For stolmen post designs:
Footprint must be no bigger than 60x60 inches, dictated by shelf size (guide, largest shelf should be no bigger than 26"x13")
Shelves must have 3mm cut out on topside of shelf to 1 inch of edge for sure step matting.
Perching shelf (largest) should be 26" x 13"
Maximum step distance from one step to next is 20"
Other than above designs are limited only by your creativity.
Don't Wants:
Montgomery Wonderpaws (yes that's his name, aka company cat) is a hardened product tester.Likes: luxury, ultra modern, fashionable, trendy products
Dislikes: the plethora of cheap, uninspired, sisal based, cat furniture and toys. He believes he deserves better! He believes you can design it.
Software:
- AutoCAD
Additional Information
Now added: pdf and word files of designs we would like / not like to see.View the files to see the standard of design we would like to see from entries. Hopefully this will also help clarify what is required for the product you will develop to create your own unique product. WE DO NOT WANT THESE PRODUCTS CREATED AS THESE ARE COPYRIGHTED. They are to be used as examples only to help you understand what we are looking for/ do not want.
Just to let all of you last minute designers know the deadline has been extended until the 2nd of January as requested to give you chance to submit your last minute designs - we can't wait to see them.
There is still time to submit your last minute designs to the competition before it closes. Thank you to all the designers who have submitted designs so far, they are certainly very varied and all unique in their own way. We would love to see more and there may still be time if you are quick. The competition closes soon so get your designs in today. Remember we need .pdf, .jpg and .dwg files for each design, so if you have submitted a design but forgotten to submit one of your file formats, please do this today. Good luck and we hope to see designs from those of you that leave things to the last minute, shortly, Bleu.
Prepaid PrizeEntries
Discussion
We have finally chosen our winning and second place prize winners for our Modern and Innovative Cat Tower competition. First of all we would like to thank everyone that submitted a design and it was great to meet a some indoor cat owners out there too. Picking the winners was very hard as all the designers merited recognition for incorporating in their own way the mental and physical well being of indoor cats into their designs. In the end we chose the designs that met the brief the closest in terms of requirements and best match for the business with an ultra modern design concept. Congratulations to Raluca Harper for her winning designs and we look forward to prototyping them over the coming months.
I am sure we will be back to Cad Crowd in the near future with more design competitions (we have new product ideas all the time) when we will hope to work with you all again.
Bleu and Montgomery - aka Company Cat
I am sure we will be back to Cad Crowd in the near future with more design competitions (we have new product ideas all the time) when we will hope to work with you all again.
Bleu and Montgomery - aka Company Cat
Hi Jayker, Thanks for asking and good question! I have been waiting on some last minute file submissions as I have not been able to see all of the designs due to not having appropriate software to view all file types. I hope this gives all entrants a full review before deciding the winner and second place design prize. I hope to have this concluded over the next couple of days.
Thanks for your patience, Bleu.
Thanks for your patience, Bleu.
When will the winner be selected?
Hello,
Please let me know, can designs still be submited ?
Please let me know, can designs still be submited ?
Hi Peter, yes just one pole to be used and everything is attached to the one pole by the fixings (as described in the details for the stolmen pole. The pole can be adjusted in height to fit floor to ceiling for most rooms. please remember if you are designing for the stolmen pole the shelves need to have a cut out on top of the shelves of 3mm to 1inch of the edge of the shelf so that the sure step matting can be fixed flush to the top of each shelf. Thanks for your question and we llok forward to receiving your design soon, Bleu.
Hello,
So i understand that the tower is based on the stolmen pole,
I am now re-doing the design i was initially planning to submit, and new ideas are forming now.
I just need one more info. Only one stolmen pole is to be used in the design, Right ? End everything else is fixed on the pole ?
Thanx
So i understand that the tower is based on the stolmen pole,
I am now re-doing the design i was initially planning to submit, and new ideas are forming now.
I just need one more info. Only one stolmen pole is to be used in the design, Right ? End everything else is fixed on the pole ?
Thanx
Hi the maximum height limit for the design is 6ft but this should be for the largest size of cat tower - not all designs will need to be this tall. The stolmen pole can go from 210cm minimum to 330cm maximum in height but for this type of cat tower you will only need to design the shelves.
hi...which is the height limit?
Hi Bleu,
Yes, it does answer my question, thank you so much!
Raluca
Yes, it does answer my question, thank you so much!
Raluca
Hi Raluca,
The contest will run to the end date. This is a design competition so I want to see as many designs as possible before selecting a winner and second place prize. Please don&
;t leave submitting your designs to the last minute as we would like time to review the designs.
I am going to be adding some sketches shortly to help everyone understand better what we are looking for, however these are not designs we want made up they are purely examples so everyone can see the type of thing we are looking for.
I hope this answers your question, Bleu.
The contest will run to the end date. This is a design competition so I want to see as many designs as possible before selecting a winner and second place prize. Please don&
;t leave submitting your designs to the last minute as we would like time to review the designs. I am going to be adding some sketches shortly to help everyone understand better what we are looking for, however these are not designs we want made up they are purely examples so everyone can see the type of thing we are looking for.
I hope this answers your question, Bleu.
Hello,
Would you please tell us whether you intend on closing the contest early or not?
Thanks a bunch!
Raluca
Would you please tell us whether you intend on closing the contest early or not?
Thanks a bunch!
Raluca
Thank you Rhizky Ariyansyah for your comment. We would like you to come up with your own design either based around shelves fitted to the Ikea Stolmen Post using its attachments (exact details including measurements of post and fittings can be found on the Ikea website) or your own unique concept. In short we want you to design the product. this is a design competition and wasn&;t aware you would want sketches. Please do get in touch if you need anything further
;t aware you would want sketches. Please do get in touch if you need anything further 
Why you don&;t attach the sketch for design?
;t attach the sketch for design? Similar Contests on Cad Crowd
Firearms storage case
Hi,
I need a 2D and 3D CAD design for a firearms storage case made out of a soft fabric such as canvas or ballistic nylon.
My intention is to have something (drawing/rendering with dimensions) available to show a manufacturer so they understand what I want.
I've attached a drawing of the case and it's dimensions. I'd like it to be padded (similar to a typical laptop case). It needs to have pouches on the outside for storage of pistol magazines, ammunition, etc.
It also needs to have a shoulder strap and carry handles.
The lid needs to be opened from the front of the case and "hinged" at the back.
On the inside, the case should have some compartments divided by padded dividers (like a typical laptop case).
I've attached some pictures of typical range bags that show examples of what I'd like.
If it can have a military/law enforcement look to it it'd be great.
The pouches can be Velcro or zippered closures.
A dark gray color would be great for the case.
Those are the basic requirements. I'll leave the rest of the design up to you. If you have any ideas to enhance it I'd appreciate it.
Thank you,
Carlos
Titanium Nails Design
We are Resinbees, a smoking accessories company based in Montreal ,Quebec Canada.We are looking to design a new nail.
The nail is to be placed at the****of a glass pipe and the tip heated with a butane torch till its red hot.We will send the design to be manufacture (Milling Machine) so please be as detailed as possible.Feel free to ask some questions if you need more information.
Sunglasses
Hello, my name is Paul and I hope you can make a production-ready sunglasses. The surface has to be matt but You will find all the details in the word document.
3D Product Design for Lipgloss/Lipstick Component
I need a 3d product design for a lipstick and lipgloss component that i am having made custom so i need a 3d concept design for the manufacturers to make the mold for this packaging. The shape of the component will resemble a crystal and very geometric. I will attach a photo of what i envision but just in 3d. Also the technology of the component is a push button pop up style, with a spring on the inside im assuming to have it released out and also clicked back in. Chanel's allure lipgloss/lipstick technology is exactly what im looking for.
This is generally everything that i am looking for but feel free to be creative and go above and beyond in terms of the shape. Anything geometric and edgy looking i would love. I want this lipstick/lipgloss packaging to be very cutting edgy and modern. Very out there in style and eye catching.
Just a rough concept design of the exterior shapes.
I want a 3d design that you are able to spin and rotate around to see all edges and shape of it because the design i want will not be uniform all around.
Thank you. Have fun with designing!
Design a product = censer
To take idea about the censer
https://en.wikipedia.org/wiki/Censer
you can search google to see the ordinary shape of censer.
Main idea:
create a ( new + modern + Sleek + simple ) design for censer.
I will put the inspiration for what I am looking in the next pages.
I need your creativity and your sense of beauty.
Here I not looking for the industrial design, I'm looking for the beauty of the external product design. your output I will give to industrial engineer to fabricated
The requested out put:
The original files
1. High render images for the product from different angles
2. some photos shows the parts combine and other shows the parts uncombined
3. I need also the Palette of the colors you used
SEE THE ATTACHED FILE FOR FULL EXPLANATION
Bstessia
Buyer