Scale Honey Dipper Stick & Stand

looking to get the first 2 rings of my design recreated in CAD so i can get them 3D printed to be used in lost wax casting, the final products will be made of brass. RING 1: rectangle face with approx 28mm X 24mm with bart simpson engraving, in 2 sizes US10 (dia 19.84mm) and US8 (dia 18.19mm) RING 2: square face approx 14mm X 14mm with spider web engraving, in US6 (dia 16.51mm) and US8 (dia 18.99mm) each ring will need to have a sprue for casting, please see pictures provided. please see design sketches for rough idea of how they should look. i have included photos of other rings with a similar finish/engraving looking for someone that has some experience with 3D printing for casting but not essential, i also have more designs really to go for use on the same rings so would like to do more after these. this is the first time i have posted on anything like this so any feedback would be greatly appreciated. any software that can generate STL/STEP/IGES files should be ok price not set in stone either

Hey Cad Crowd! Got another project for the personal jewelry collection I'd like done. Trim Scissors as a necklace pendant. Trim Scissors? Yes, Trim Scissors. I work in the Colorado Cannabis industry and a sign of good times to come is trim scissors. Nothing more satisfying than sitting down at a table and manicuring your hard work after busting backside for several months. So I'd like to make a scale version that will work as a necklace pendant with some Tritium vials in the handle portion for additional cool factor.

Hi there, I am planning to do some 3D project that needs to be printed by a 3D printer. In order to do so, I need to first have a CAD file of my 3D objects/figures, and I have no clue how to do the CAD design by myself. So, this is why I am reaching out to you. Speaking of the project that I have in mind and now actually ready on papers, I would say that I need someone who is able to design the CAD files of four 3-dimentional mathematical functions (very simple 3D planes/surfaces which are supposed to be placed in a cubic framework which is 10*10*10cm^3 in size) with some certain specifications (colors, thicknesses, etc.) that I have already decided about and everything in form of a 2D version is on papers right now. To be honest, although my project is pretty straightforward, I want it to be done very carefully and professionally. I just need someone who is expert enough and patient enough to make a nice professional CAD file for me. I have roughly one week to get this project done, and everything with that should be done by Friday 23rd. However, the sooner, the better! I will await your replies. Best, Ali

This will be 3D printed (please refer to images) - 1/8” inch in diameter - one end will screw into a plastic wall that is .25 inch wide (bottom) part - so length of this threaded area should be about .2 inches long (yellow area in image) - the other end will taper into a round dome (top part in image) - the largest length of pole, when fully extended will be .875 inches (7/8”) long - the shortest length when fully compacted, will be .4375 inches (or something close to that) (7/16inches) - the apparatus will be 1/8” long (grey area in image) - the diameter will be slightly wider than general pole diameter - apparatus will have largest diameter - then base pole will have smaller diameter then extension pole will have smaller diameter threaded area should have same diameter as extension pole

I need a cool looking "coin", 52mm diameter, 4-5mm high, but hollow (because it's half the coin really, I have the other half done), with a 1mm edge all around, hollow cavity 50mm inside the edge and 2 mm high, leaving 2mm for the face which can be embossed like a real coin. It needs to be printable on a hobby printer with .4mm nozzle