Hire the best freelance Controls Design expert designers for your company

I am a mechanical engineer with extensive knowledge in electrical controls design. Services I provide... - Mechanical Design and Documentation - Electrical Control Panel Design & Assembly - Robot Pr... Read more

I am a mechanical engineer with extensive knowledge in electrical controls design. Services I provide... - Mechanical Design and Documentation - Electrical Control Panel Design & Assembly - Robot Programming (ABB, RobotStudio) - Robotic workcell design Please feel free to contact me for any assistance on projects.

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept design... Read more

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept designs and installation, start-up, acceptance testing, and electrical safety Panel modifications and upgrades. Specialties: - Controls Engineering - Machine Safeguarding Electrical & Hard Guarding - Arc Flash Safety PPE Requirements - Power/Control Panel Design - Engineering Administration - Panel/Control System Upgrades - AutoCAD Electrical (2011-2013) - PLC Programming (Allen Bradley Micro, 500, Studio 5000) - Microsoft Office (Word, PowerPoint, Excel) - SCADA HMI Design (Wonderware, Panelview, C-More) - Wireless, Broadband network communication - Industrial Low Voltage Grounding and Short-circuit Protection - Arc Flash Panel Assessments (Easy Power) - Design Electrical Safety Controls - Interpret Electrical Single Line Drawings - Mange Small Capital Projects (< 150K) - Working Knowledge of NEC, NFPA 70E and NFPA 79 - Machine Guarding Team Leader - Root Cause Problem Solving - Supply Chain Management

Designer with analytical process, electrohydraulic and PLC controls with management, field experience in safety critical oil/gas and power control systems Read more

Designer with analytical process, electrohydraulic and PLC controls with management, field experience in safety critical oil/gas and power control systems

WORK EXPERIENCE RANGER DESIGN | ENGINEERING DESIGN CO-OP Jan 2017 – September 2017 | Baie-D’Urfe, QC • Created drawings forinstallation guides and engineering changes requested for product enhancem... Read more

WORK EXPERIENCE RANGER DESIGN | ENGINEERING DESIGN CO-OP Jan 2017 – September 2017 | Baie-D’Urfe, QC • Created drawings forinstallation guides and engineering changes requested for product enhancement. • Tracked standard items for projects and engineering changes through resource planning software like, Syteline. • All the CAD changes were done following the industry standards in solidworks. Sheet Metal feature was primarily used to design new parts/prototypes. • Worked on a redesign project of partitions and shelf units for new series of vans. Analysis was done using Solidworks to verify necessary design changes. • Worked on a feasibility study to enhance production and supply chain management. ACADEMIC PROJECTS SYSTEM CONTROLS LABORATORY January 2018 - March 2018 • Modelled a closed loop control system using PID controllers in Matlab Simulink to controlrotary response of flexible joint. • Performance of the system was compared with open loop system and the analysis was throughly documented. BRACKET TOPOLOGY OPTIMIZATION September 2017 – February 2018 • Two similar projects were done on topology optimization using two different analysis software: Abaqus and Solid Thinking. • Redesigned an existing bracket based on given boundary conditions and manufacturing conditions. • Using the analysis software the bracket was optimized for weight and strength alike. AUTOMATIC CASE ERECTOR September 2016 - April 2017 • As part of the Capstone Project, an automatic packaging machine was designed for Hypertec Ciara. • Modelled and designed the pneumatic actuated machine from conceptual phase to final design phase • Stress and deformation analysis were done on the structure using ANSYS, to verify weakness in design and make enhancements accordingly. • Presented feasibility and structural integrity of the design to the client. JET ENGINE ACCESSORY GEARBOX January 2016 - April 2016 • Designed an accessory gearbox following the AGMA standards using Solidworks. • Gear, lubrication and bearing analysis calculations were done using excel and Matlab.

Automation and Control engineer with over 14 years of experience in doing electrical design, wiring machinery, commissioning, test/trials, PLC ladder logic writing and HMI/SCADA design. Read more

Automation and Control engineer with over 14 years of experience in doing electrical design, wiring machinery, commissioning, test/trials, PLC ladder logic writing and HMI/SCADA design.

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important tha... Read more

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important that I want to share with you today. For most of you reading this, hiring an electrical engineering freelancer or contractor has been a struggle to say the least. You have likely lost a great deal of money only to receive a sub-marginal product. Constant change orders, redraws, slow work, missed deadlines, failing “cross-functional” teams, no quality assurance, and huge bills are just a few examples. I would imagine that you are feeling very frustrated, confused, and maybe even a little humiliated. Does this sound about right? You are correct to be worried, because many people get screwed over when they hire an engineering contractor. But what if I told you there is one thing, just one thing you could do to flip the script? It is as easy as sending me a message on Cad Crowd. I am an American entrepreneur, electrical engineer, and trusted consultant. I am an accomplished expert with nearly a decade of experience in the electrical engineering industry. As a knowledgeable professional with experience in the nuclear industry, I have had serious involvement with numerous quality-dependent, critical power and control systems. Within five years of graduating from the prestigious Clarkson University with a Bachelor of Science Degree in Electrical Engineering, in addition to minors in both Computer Science and Mathematics, I obtained experience at a multinational technology company and also rapidly became a trusted, lead analytical engineer at Indian Point Energy Center. Today, I help individuals and entrepreneurs maximize their profits by increasing their technical expertise. Once we are both interested in working together on a project, before you even spend a penny, I offer a free, no-obligation video conference kick-off meeting to eliminate any reasonable doubt that we are a perfect match for each other. When working with me, you get to save money on high-quality services. If, like for many cash-constrained businesses, your budget is under scrutiny, you may be forced to rationalize your procurement model. Traditional consulting firms are just not agile enough to adapt. Red tape strangles engineers in many firms. Do not overspend on a wasteful system. Embrace the cost reductions! It is the only way to accelerate your growth and wealth! When working with me, you have access to a quick, easy, and convenient hiring process. In the engineering services sector, most businesses still rely heavily on localized industry experts, consulting firms, and in-house talent. These engineers are often experts, but their geographic proximity to their clients is more often their greatest fortune. The process for procuring my service is extraordinarily quick and simple. I embrace business flexibility. All you need to do is send me a brief message on Cad Crowd! When working with me, you get clarity and security. The payments involved are clearly defined upfront. You do not assume the risk that a firm might claim to be starting a project, take a deposit, and then not deliver. There is no reason not to act now. Your co-workers will rave about your success! When firms change engineers during the project, team turnover can put projects of any size at risk. Throughout the process, one or more team members leaving could result in a project failing if the knowledge and talent walk out the door. When working with me, you know that I am going to be the one working on your project from start to finish with an outcome driven mindset. Visit the link below now to check out my website and see why businesses come to me for solutions. I want to help you, but I am a busy guy and do not have much time to add additional projects to my plate. Do not wait until it is too late. Do not continue to struggle day to day to ensure your market dominance and make a sustainable profit. Everyone knows that we needed our independent expert opinion and design solutions yesterday. Make your life easier. Send me a message on Cad Crowd now to get your project started! I will talk to you soon.

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of th... Read more

For the last 25 years, I have created Instrument and Electrical Design documents for I&E Design Departments nationwide. Develop through continuing education and training a thorough understanding of the areas of I&E Design, including basic knowledge of UL Industrial Control Panel fabrication standards for non-hazardous (UL 508A) and hazardous locations (UL 1203, 698A). Assist in conducting field audits and investigations of customer facilities and manufacturing plants. I try to identify opportunities for improvement and make constructive suggestions for change. Comply with company standard policies and procedures. I have experience and Technical Training in Instrument and Electrical Design for the Industrial, Commercial, Manufacturing, or Oil and Gas industries. iOccasional travel to client offices and construction sites will be required.

I recently started an innovation and product development company which utilizes design and fabrication methods to develop an idea and turn it into a tangible product. We provide a hands on and persona... Read more

I recently started an innovation and product development company which utilizes design and fabrication methods to develop an idea and turn it into a tangible product. We provide a hands on and personal touch to any project no matter the engineering challenge. Our services include product development, small batch manufacturing, 3D CAD design, packaging solutions, manufacturing consulting and anything needed to take your idea to the marketplace. I was recently working at Nephron pharmaceuticals as the Director of Engineering. Our teams main focus was design, fabrication, development of new machinery, product development studies, on the line support, fixing automation challenges and anything to keep production operating smoothly. I was responsible for the Engineering Department at Nephron pharmaceuticals managing the teams, all automation and machinery at Nephron, including BFS (Blow fill seal), secondary packaging machines, automation integration, medical device manufacturing and cleanroom machines. I have developed many products including 5 of my own patents. One of which has sold over 30,000 units in the last few years. I graduated with my MS degree in Aerospace Engineering in 2020. My research topic was “The Design and Control of an Arrayed Infrared (MAT-IR) Heater for Accurate Heating Control During Automated Fiber Placement”. My knowledge of control systems and Thermodynamics was put to the test to develop this system. The research included the understanding of the Automated Fiber Placement (AFP) process parameters and planning. Feel free to reach out to me if you want to know more.

I have worked in the oil,gas and process industries for over 40 years as an instrument and controls Designer / Engineer. I have worked on major projects both on and off shore. I have also worked for s... Read more

I have worked in the oil,gas and process industries for over 40 years as an instrument and controls Designer / Engineer. I have worked on major projects both on and off shore. I have also worked for small companies designing an manufacturing electrical switchgear and control panels from design concept to installation and commissioning. I have used Smartplant Instrumentation, Solidworks 3D. Auto cad and Microsoft Office software systems to develop and design design and engineering documentation.

Talented instrument and controls engineer experienced in industrial water tube and fire tube boiler automation and control systems, lead/lag/standby control, feed water control, level control, food &... Read more

Talented instrument and controls engineer experienced in industrial water tube and fire tube boiler automation and control systems, lead/lag/standby control, feed water control, level control, food & beverage processing control, consulting, start-up project management and leadership, technical support, instrument calibration, flow element calculation requirements, valve sizing calculation requirements, electrical panel design, programmable logic controller design (PLC), automation graphic user interface (GUI) software design and development.

I am an electrical engineer with a background in electrical and mechanical design. Read more

I am an electrical engineer with a background in electrical and mechanical design.

My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIO... Read more

My work experience can be summarized in participating in detail design and design review of several Oil and Gas related EPC project which can be summarized as follows: - OMAN SRIP PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic and control narratives for coke drum sequence control system, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system - SAUDI ELASTOMER PROJECT as a SENIOR INSTRUMENT & CONTROL ENGINEER: o Responsible for whole project vendor designed packages and their review, developing logic, cause and effect, control and safeguarding narratives of the whole EPC project, leading I/O database work, design review for machine monitoring and protection, DCS and SIS system as a SENIOR INSTRUMENT & CONTROL ENGINEER - SOUTH PARS PHASEs (Phase 12, Phase 17 and 18) as an INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT: o Responsibilities: Principal detail design work for several related Demin water, waste water and polishing water units as a INSTRUMENT & CONTROL ENGINEER, SENIOR INSTRUMENT & CONTROL ENGINEER and shortly promoted to DEPUTY OF ENGINEERING MANAGEMENT. My skills can be summarized as in developing required detail instrument and control documents for EPC projects (Control narratives, C&E, S.G. Narrative, Logic, Index, Cable routing, etc., package or detail design review, design leadership and highly qualified in working with Autocad, and M.S. Office, programming and etc. The key strengths and achievement that I possess for success which make me very competitive candidate for the above position are as follows: • Receiving Award of Excellence of Year 2014 as the best instrument engineer in a reputable EPC Company, due to EPC project cost saving of more than 5,000,000 USD. • Leading package design works for more than 39 packages for SAUDI Elastomer project and more than 20 packages for OMAN SRIP project. Those packages include Utility boilers and water, air and oil utilities, several gas and air reciprocating and centrifugal compressors and etc. • Leading the design work for the Vibration monitoring and condition monitoring system of above projects • Developing the control and safeguarding narrative and logic works of SEP project (SAUDI Elastomer Project) • Leading the instrument database works for above projects • Being involved in various turbine control scenarios and I believe myself as a turbine control specialist. • Promotion from principal to senior to lead instrument engineer and finally to vice of deputy of engineering management in a process package vendor company within short period of time due to the high technical and leading skills • Leading detail design works of packages in vendor companies with variety of abilities including detail design, PLC programming and etc. • Leading and also carrying out the detail design, procurement and some parts of the constructions steps of more than four EPC process and utility units in Oil and Gas Industries worldwide as a vendor package detail designer and reviewer. • My strong analytical and forward looker mind, punctuality, perseverance, excellence and development seeking characters have led to more accurate, efficient and cost saving designs • Cost effectiveness along with better efficiency is one of the aims is being sought and I believe that engineering is a trade-off between the cost and the efficient design With a BS degree in Instrument and Control Engineering, I have a very good knowledge of process control and instrumentation, high leadership potential and energy levels, very strong analytical mind and deep detail-oriented skills, multitask handling abilities, responsible, creative and strong technical experience, very motive, super active and highly efficient and all this is owing to my educational backgrounds and absolutely my past experience in research then in detail design, then design review of small to enormous EPC project as well as conducting detail design leadership as a senior instrument and control engineer. Attached, you can find my resume for your kind consideration. I can be reached anytime via email at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ or my ▒▒▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

I'm an electric engineer that have an experience in construction field[Design&Build]. I'm able to make load estimation based on client requirement or according to international codes, Design Ligh... Read more

I'm an electric engineer that have an experience in construction field[Design&Build]. I'm able to make load estimation based on client requirement or according to international codes, Design Lighting system based on lux calculations that's making by dialux program and based on required lux values in the project spaces that's based on international codes of lighting [ IES, CIBSE], design Power system based on client requirements and the services in the spaces, choosing and design the suitable panel boards, making panel board schedules taking into account Phase balance concept,making single line diagram, short circuit calculations and choosing the breakers rating based on it, Design Fire alarm network[Conventional or Addressable]. I'm able to make shop drawings by Auto cad to all the above systems to be installed in the site. Also, In field of electronics, I'm able to design electronics circuit and that's based on micro-controller, PCB Design to any electronic circuit.

I have worked in the Controls field for over 30 years. My primary focus has been control panel and system design using AutoCad software and the associated PLC and HMI programming to go with it. I ca... Read more

I have worked in the Controls field for over 30 years. My primary focus has been control panel and system design using AutoCad software and the associated PLC and HMI programming to go with it. I can provide electrical drawings in AutoCad or AutoCad Electrical. PLC and HMI programming can be completed in Allen Bradley, Omron, Unitronics, Wago and Automation Direct. I also have experience in designing small PCBs for custom applications within these automation projects. I have developed multiple projects using Arduinos and Raspberry Pis.

25+ years in the Electrical, Instrumentation and Controls Industry. I've worked within almost every industry, voltages up to 138KV. Read more

25+ years in the Electrical, Instrumentation and Controls Industry. I've worked within almost every industry, voltages up to 138KV.

I am MEP Design Engineer. I have designed Multiple commercial and Residential projects. I havea strong command in Autocad, Dialux and HAP. I designed all the drawings as per standards. I have complete... Read more

I am MEP Design Engineer. I have designed Multiple commercial and Residential projects. I havea strong command in Autocad, Dialux and HAP. I designed all the drawings as per standards. I have complete multiple permit projects in USA, CANADA.

Controls engineer with over 10 years experience electrical design of industrial control systems. Read more

Controls engineer with over 10 years experience electrical design of industrial control systems.

Extensive Product Design and Development experience from Concept Ideation though final production. Participated and supported many multi-disciplinary teams including research scientists, designers, en... Read more

Extensive Product Design and Development experience from Concept Ideation though final production. Participated and supported many multi-disciplinary teams including research scientists, designers, engineers, agency and quality. Key role in the successful development of over 100 products in the marketplace today with a primary focus on medical devices. Experience • Over twenty years of mechanical design in military, industrial, commercial, consumer and medical product development. • Collaborating/coordinating with industrial design, electrical engineering, manufacturing vendors, contract manufacturers and clients. • Human factors and use case scenario understanding and application. • Design for manufacturing, design for assembly, and design for serviceability. • Troubleshooting injection molded plastics and tooling issues • Inventor/co-inventor of multiple patents. • Extensive knowledge of Sheet metal, molded plastics, extrusions, rubber, die castings, double-shot moldings, and stamping fabrication / processing. • Knowledge of Material Science (polymers and co-polymers). • Over 40,000 hours on SolidWorks CAD software, including advanced surfacing. • Clear, accurate communication, both written and verbal. • Exceptional track record of being resourceful and solving complex problems. • Complete knowledge of Quality System Management for ISO 13485.2008 • Working understanding and knowledge of FDA Regulations for design controls per CFR 820.30

Mechanical engineer with 25+ years of experience designing equipment and manufacturing processes helping clients be more efficient in their manufacturing. Competent is controls as well, I can help w... Read more

Mechanical engineer with 25+ years of experience designing equipment and manufacturing processes helping clients be more efficient in their manufacturing. Competent is controls as well, I can help with the entire machine and also build it if required.

I am a new Mechanical Design Engineer with ample coursework in machine design, FEA, part design, and some CFD. I have many projects involving user controls, solar panels, thermal management, and much... Read more

I am a new Mechanical Design Engineer with ample coursework in machine design, FEA, part design, and some CFD. I have many projects involving user controls, solar panels, thermal management, and much more. I also have a lot of time working with motorcycles and automobiles. Feel free to reach out about a project anytime.

Qualifications - Mechanical Engineering (HND) • Heavy Mechanical Engineering industry - Design and Manufactures (Barlow’s Heavy Engineering), Mine Winding Plant (Winder Controls) (IMG Consultant Engi... Read more

Qualifications - Mechanical Engineering (HND) • Heavy Mechanical Engineering industry - Design and Manufactures (Barlow’s Heavy Engineering), Mine Winding Plant (Winder Controls) (IMG Consultant Engineering), Forklifts (Hyster), Low body trailers (Hyster), Earthmoving Equipment Engine refurbishment (CATERPILLAR), Jaw and Cone crushing equipment (OSBORN), Mine Plant and Equipment Maintenance and Methods studies (SOMINCOR – RIO TINTO ZINC) • Design and calculations, FEA, R&D, Welding Design, Metallurgy, Mechanical Engineering Drawing (Drawing Board, AUTOCAD and Autodesk INVENTOR – 3D), Project Management, Drawing office Management, Tendering, Customer Liaison, Technical Buyer and Purchasing, Technical Sales. • Workshop experiences - Fabrications, weldments, machining, Equipment manufacturer (Home Appliances), CAM (Machining and Flame cutting), NDT (Non-Destructive Testing), Quality Control, Maintenance and repair. • Large sized shafts, power transmission, Gearboxes, gears and gearing design, Hydraulics and controls, Hydraulic Cylinders, Bearings, • Mine Winder Drum Design – Machines to hoist ore and mine-workers (300 at one time) from deep level mines over 2.5 Km deep. Drums design, Castings and fabrication (over 6m dia.), Breaking systems over 6m dia. All major parts designed for infinite life as human life at risk. All major parts quality controlled at different manufacturing stages to guarantee homogeneous parts. Sound knowledge of metallurgy and welding techniques required to choose correct materials. • Helped develop Mechanical Engineering design computer programmes to improve quality and reduce design cycles. Helped prepare mathematical models for these programmes.