Hire the best freelance csi columns expert designers for your company

Iam excellent in designing concrete and steel structures.iam excellent in English.i have excellent experience in interior design by sketch up .iam working with sap,safe,etabs,csi col,tekla,stad pro. I... Read more

Iam excellent in designing concrete and steel structures.iam excellent in English.i have excellent experience in interior design by sketch up .iam working with sap,safe,etabs,csi col,tekla,stad pro. Iam designing by American code and any other codes

Civil Engineer with 5 Years of experience in different fields, able to work in different civil disciplines. Read more

Civil Engineer with 5 Years of experience in different fields, able to work in different civil disciplines.

• Soliman is a professional consultant structural engineer with more than 20 years of extensive international experience in Egypt, France and Gulf Countries in the design, review and management of med... Read more

• Soliman is a professional consultant structural engineer with more than 20 years of extensive international experience in Egypt, France and Gulf Countries in the design, review and management of medium and mega scale projects, including prestressed and non-prestressed bridges, tunnels, Complex structures, Residential and office buildings. • Areas of proficiency include the Preparation types selection reports, Structural analysis, Conceptual, Preliminary and final design, in addition of preparation projects specifications, BoQ, plans and estimates. Valuable knowledge of international design codes and standards such as (AASHTO and ACI, Euro Code Euro Code UK, FR, DIN, Saudi M.O.T and MOMORA. Requirements and Egyptian code of practice for concrete structures). • Extensive experience in the use of different modelling and analysis software such as: CSI Bridge, SAP2000, ETABS, SAFE, ROBOT, DLUBAL, and STAAD PRO… • Through more than twenty years of experience in the Engineering and construction field, the following expertise was also acquired: - Team building & leading - Planning and cost control supervision - Client Coordination - Project Performance • Possess ability to successfully apply management skills and work closely with Contractors, Architects, Engineers, and Owners to plan and execute projects safely within established time and budgets while maintaining quality

I am Khaled Koresh, 25 years old, and I work as a structural design engineer. I am good at working on engineering programs such as AutoCAD, SAP 2000, SAFE, ETABS, PROKON, Hilti, Excel and Word. Read more

I am Khaled Koresh, 25 years old, and I work as a structural design engineer. I am good at working on engineering programs such as AutoCAD, SAP 2000, SAFE, ETABS, PROKON, Hilti, Excel and Word.

Senior Civil Engineer. I graduated from the faculty of engineering(civil department) at Beni Suef University. I took courses such as P6, Structural Design Diploma, Site Engineer Preparation and CAD.... Read more

Senior Civil Engineer. I graduated from the faculty of engineering(civil department) at Beni Suef University. I took courses such as P6, Structural Design Diploma, Site Engineer Preparation and CAD. I have experience in roads, factories, administrative buildings and water plants. I am also good at architectural division. I work in the shop drawing for high rise buildings and administrative buildings. I am proficient in CAD program for Drawing and inventory. I can do any services related to planning and pricing(Primavera).

EXPERIENCE: 1.Developed and implemented solutions to maintain and improve client infrastructure at existing sites. 2.Integrated known material stress factors into construction planning to support safe... Read more

EXPERIENCE: 1.Developed and implemented solutions to maintain and improve client infrastructure at existing sites. 2.Integrated known material stress factors into construction planning to support safe and lasting buildings and infrastructure. 3.Managed construction contracts for capital projects to outline objectives, stakeholder responsibilities and modification procedures. Liaised with civil technicians to prepare and update maps, drawings and blueprints using manual and computer-assisted methods TECHNICAL SKILLS: 1.Estimation & Costing 2.CAD Drafting 3.Site Inspection 4.Building structure 5.Support structure analysis 6.2D and 3D renderings 7.Construction techniques 8.CAD software proficiency 9.Structure designs 10.Load Calculation

I am civil engineer graduated from engineering faculty of kfs university with overall rating: excellent. My graduation project was (design of reinforced concrete structures). I can use a lot of progr... Read more

I am civil engineer graduated from engineering faculty of kfs university with overall rating: excellent. My graduation project was (design of reinforced concrete structures). I can use a lot of programmes for designing for example: Csi etabs Csi safe Csi column Sab Autocad Excel ... By using these programmes I can design a lot of reinforced concrete elements: columns, slabs in different statical system ( flat,solid and holly block slabs) and foundation design as spreed footings or raft according to the soil strength In addition to that I can represent all of that in cad drawings professionally. Finally I hope to provide you with the best available service. Thanks...

more than 12 years working experience in the construction and design field starting from preparing a preliminary coordination plan before the schematic design process, structural analysis, detail desi... Read more

more than 12 years working experience in the construction and design field starting from preparing a preliminary coordination plan before the schematic design process, structural analysis, detail design, calculations, BIM modeling, clash detection, general arrangement & reinforcement drawings , Coordination with other departments and checking for interdisciplinary clashes before submission to the client. - having previous experience of many types of buildings ( residential, industrial, high rise buildings, luxury villas, steel trusses, portal frames, water structures, wastewater treatment plant, RO planets elevated tanks, steel tanks) - design review, quality control, and coordination between disciplines.

- BSc in Civil Engineering (Structural Department), 2016, Ain Shams University, Cairo, Egypt. - (4+) years of hands-on experience in variety of large, medium and small scale projects in UAE and Egypt.... Read more

- BSc in Civil Engineering (Structural Department), 2016, Ain Shams University, Cairo, Egypt. - (4+) years of hands-on experience in variety of large, medium and small scale projects in UAE and Egypt. - Highly skilled in multiple analysis, modelling and drafting software platforms. - Working on projects on all stages from concept to construction under tight schedules. - Carrying out conceptual and detailed design in Reinforced Concrete, Steel, Pre-stressed and Post-tensioned concrete. - Experience and extensive knowlege of the following: * Design of R.C. structures. * Design of Post-tensioned and Pre-stressed concrete. * Design of Steel structures. * Design of Water structures. * Strengthening and Rehabilitation of R.C. structures. * Shop Drawing of R.C. and Steel structures.

Structural engineer / bridge designer engineer. My responsibility is to modelling, analysing, design and submit approvals for a lot of bridges and corridors in Egypt as Luxor corridor, mokattam corrid... Read more

Structural engineer / bridge designer engineer. My responsibility is to modelling, analysing, design and submit approvals for a lot of bridges and corridors in Egypt as Luxor corridor, mokattam corridor, Aswan corridor, 26 July corridor and Elhadarat extension corridor. Having a respectfully experience in design and analysis manually and by using softwares that based on FEM as SAP, SAFE,ETABS,CSI column (CSI package), Midas , and a simple knowledge about Ram ,and BEM as (plpak), in addition to modelling and drafting software as CAD and REVIT. With a valuable knowledge in many codes as ECP,AASHTO LRFD, EUROCODE , and ASCE .

Within 10 weeks, I studied and learned project and departments work flow, how to put Structural systems, Seismic design and analysis, ETABS, SAFE, Construction code comparison, CAD drawing presentatio... Read more

Within 10 weeks, I studied and learned project and departments work flow, how to put Structural systems, Seismic design and analysis, ETABS, SAFE, Construction code comparison, CAD drawing presentation, Revit Structure, Foundation design, Site visits and soft skills. The final project: Educational building consisted of 3 floors and 1 basement, the project area is 12000 square meters, three structural systems (solid slab - flat slab - hollow block) Within three months I trained on preparing site, flat slabs, solid slabs, finishing works, soil compaction and replacement Within 8 weeks I trained on foundation works, columns, beams and slabs installing

I have an experience of 2 years in AutoCad works . I can do any structure drafting with all types of beams , Slabs , Columns , deck slabs , zshear walls etc. I can also do the architectural work li... Read more

I have an experience of 2 years in AutoCad works . I can do any structure drafting with all types of beams , Slabs , Columns , deck slabs , zshear walls etc. I can also do the architectural work like 2D design of a residential building and revit work .

We are a civil engineering studio "Krasteff and Aykoff Engineering" Ltd. We are situated in Bulgaria and we are engaged in the design of residential and administrative buildings. Our specialty is re... Read more

We are a civil engineering studio "Krasteff and Aykoff Engineering" Ltd. We are situated in Bulgaria and we are engaged in the design of residential and administrative buildings. Our specialty is reinforced concrete structures. The team consists of: Dipl. Eng. Todor Krastev - 6 years as a civil engineer Dipl. Eng. Kristian Aykov - 5 years as a civil engineer We develop our projects using BIM modeling in REVIT environment .This helps us with project coordination, reduces the risk of errors, eases the workflow and reduces the amount of work. We can offer you: -FULL 3D structural model of the building -Reinforcement of structural elements in REVIT - slabs,stairs,wall and columns -Structural shop drawings using both Revit and AutoCAD -Full material take off - based on the model -Statics and Dynamics using ETABS and ROBOT STRUCTURAL ANALYSIS Our company also offers consulting services in BIM design for structural engineers. We excel at using Dynamo based scripts to automate the process of the structural engineer and REVIT design.You can see my linkedin page for more references about dynamo scripts. More information on the style of work and some of the projects we have worked on through the years can be found in our portfolio: https://www.slideshare.net/KristianAykov/krasteff-aykoff-engineering

Assistant Professor, Department of Civil Engineering, Payam-e-Noor University, Tehran, Iran Read more

Assistant Professor, Department of Civil Engineering, Payam-e-Noor University, Tehran, Iran

I am an Architectural Technician in Kenya with 3 years working experience.I have worked various Architects in Kenya on freelance basis and also as an employee in Architectural firms,i have also handle... Read more

I am an Architectural Technician in Kenya with 3 years working experience.I have worked various Architects in Kenya on freelance basis and also as an employee in Architectural firms,i have also handled personal projects some complete and others ongoing.I also offer part-time drafting services to architectural and interior design firms.

I am Mechanical Engineer with more than 1 years of experience in Designing.I can design your 3D and 2D cad model as per your requirements and ideas! The services I offer include: * 3D Designing * 3... Read more

I am Mechanical Engineer with more than 1 years of experience in Designing.I can design your 3D and 2D cad model as per your requirements and ideas! The services I offer include: * 3D Designing * 3D Modeling I use Solidworks for all my work. Don't hesitate to contact me if you have any questions.

hello I work as a freelance 3d. I can help you do work 3d. there have been many local 3d projects that I created. I worked dearly meticulously. I can do 3d modeling and make 3d,2d animations and assor... Read more

hello I work as a freelance 3d. I can help you do work 3d. there have been many local 3d projects that I created. I worked dearly meticulously. I can do 3d modeling and make 3d,2d animations and assorted about 3d.

I am a Mechanical Engineer I am available here 24x7. I can create your desired 3D model using CAED softwares. Moreover I can create realistic rendering of your project. CAED Softwares used:... Read more

I am a Mechanical Engineer I am available here 24x7. I can create your desired 3D model using CAED softwares. Moreover I can create realistic rendering of your project. CAED Softwares used: 1.CATIA V5. (know more than 6 Workbenches) 2.Solidworks. 3.AutoCAD. Realistic Rendering Softwares Used: 1.Keyshot. 2.Inbuilt CAED software rendering. For me the Primary Concern is Quality of doing project .The Project will have a Standard design. Thank you

I have 5year+ experience in CAD/CAM engineering and industrial robotics. My specializations are mechanisms, moving parts, sheet metal, and chassis design. Read more

I have 5year+ experience in CAD/CAM engineering and industrial robotics. My specializations are mechanisms, moving parts, sheet metal, and chassis design.

I can make advanced designs professionally in Autodesk Inventor. I have experience with Catia and Solidworks. My goal is to make the machines I design cost-effective, easy to produce, and to fulfill t... Read more

I can make advanced designs professionally in Autodesk Inventor. I have experience with Catia and Solidworks. My goal is to make the machines I design cost-effective, easy to produce, and to fulfill the customer's special requests in my machine. Cataphoresis Feed line. I designed belt systems and chain systems for seed processing facilities, textile industry, automotive industry, mold manufacturing and product transportation.

Hi, I'm 𝕱𝖆𝖇𝖎𝖆𝖓 𝕸., a passionate 2D/3D Graphic Designer and 3D Artist/Engineer with strong technical and creative skills. Born into a Portuguese family in Venezuela, I hold a tech-knowledge Engineering... Read more

Hi, I'm 𝕱𝖆𝖇𝖎𝖆𝖓 𝕸., a passionate 2D/3D Graphic Designer and 3D Artist/Engineer with strong technical and creative skills. Born into a Portuguese family in Venezuela, I hold a tech-knowledge Engineering degree from U.C.V., Venezuela’s leading university. I bring a meticulous, artistic, and engineering-focused approach to each project, ensuring top-quality outcomes. As a mid-experienced 3D Artist/Designer, I thrive on creativity and practical solutions through 3D modeling and rendering. My diverse background allows for fresh perspectives and dedicated efforts in my work. Main Skills and Expertise: 3D Modeling & Texturing: Proficient in Blender and Adobe Substance Painter. +3D Rendering and Lighting, including 3D Mockups. Rigging & Posing: Experienced with Unreal Engine. Exporting/Importing: Skilled in managing models across multiple platforms. Also, preparing models for 3D printing and manufacturing. Whether you need detailed 3D models, precise textures, or optimized assets for game-ready, floor plans or manufacturing, I am here to help. Let's create something exceptional together! Looking forward to being your MVP, ~ V. Fabian T· Mendes C. · 2D/3D Graphic Designer - Modelling & Texturing/Materials | Blender 3D - UE5 - A.Substance Painter | UpW's freelancer Rising Talent @ 2023 + Top Rated (2024)

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and con... Read more

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and consumer products (water bottles, utensils, etc.). I take design and product requests, and will do my absolute best to ensure the client's needs are met! I look forward to working with you!

Visionary | Positive | Perfectionist Delivering quality work is the motto. No matter how small or big the task is. Friendly, and dare to finish attitude. Have being in architecture printing fiel... Read more

Visionary | Positive | Perfectionist Delivering quality work is the motto. No matter how small or big the task is. Friendly, and dare to finish attitude. Have being in architecture printing field since 8+ years of experience. Have been exploring the 3d visualization since 2 years. Have expertise in brochure design and 3d exterior renderings.

my name is muhamed zaki, mechanical power engineer, Read more

my name is muhamed zaki, mechanical power engineer,