Hire the best freelance Electrical Development expert designers for your company

I'm an artist of different levels of education gained, some by college, military, and other. My reverse engineering skills from international sources abroad, being bilingual to other languages includi... Read more

I'm an artist of different levels of education gained, some by college, military, and other. My reverse engineering skills from international sources abroad, being bilingual to other languages including Japanese.

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

7+ Years of working experience in the Maintenance & Service Field. 3 Years of working experience in the Electrical Design & Drafting Field. Read more

7+ Years of working experience in the Maintenance & Service Field. 3 Years of working experience in the Electrical Design & Drafting Field.

I'm professional electrical engineer 1. Low voltage: - (Earthing & lightning protection – power- lighting – Air conditioning (split – central) – Panels – Cables - Elevators). 2. Medium voltage :- (RMU... Read more

I'm professional electrical engineer 1. Low voltage: - (Earthing & lightning protection – power- lighting – Air conditioning (split – central) – Panels – Cables - Elevators). 2. Medium voltage :- (RMU- transformers – Cables). 3. Low current :-( Fire Alarm –Telephone – Data networks – IP telephone - IP camera – clock system – Intercom – Projector). Using the most popular codes and standards

I am Senior Electrical and Electronic expert with over 7 years of good experience in handling Electronic systems and Power System analysis for Generation, Transmission, Distribution Utilities, Bulk po... Read more

I am Senior Electrical and Electronic expert with over 7 years of good experience in handling Electronic systems and Power System analysis for Generation, Transmission, Distribution Utilities, Bulk power-consuming industries, Control systems, and Digital Logic Design(Controller Programming), industrial devices, IoT, and Machine learning. ☑Power System Services; Good enough experience in the modeling of Power Systems, Control systems Scheme, Communication Systems Diagrams, and Digital Logic Design solutions using different methods and simulation software such as ETAP(Electrical Transient Analysis Program), PowerWorld Simulator, DIgSILENT (Power Factory), DIALux, MATLAB, Labview, Draw.io, Verilogue/VHDL/FPGA programming, Arduino, STM32, Multisim, Microblaze, and Xilinx. ☑PCB Design Services: I have experience of about 7 years in Schematics Design, PCB design, BOM creation, Gerber (manufacturing) file, and programming. Completed successfully around 70+ projects using Kicad, Altium, ZenitPCB, Gerbv, Eagle PCB, and Circuit maker. Furthermore, I provide the services of basic and detailed engineering projects based on ITB project specifications. Datasheets and plot plan. *******I DO WHAT I COMMIT AND I COMMIT WHAT I CAN DO******* Regards Abubakar. MA

Embedded systems expert with a focus on hardware and firmware development. My experience covers areas such as: - Turnkey development of embedded hardware and software (you come with an idea and I del... Read more

Embedded systems expert with a focus on hardware and firmware development. My experience covers areas such as: - Turnkey development of embedded hardware and software (you come with an idea and I deliver final production-ready product.) - Microcontrollers and their firmware (ARM, STM32, MSP430, Atmel, PIC32.) - Any communication protocol (Wi-Fi, Bluetooth, LoRaWan and more.) - PCB designs using any tools you want. - Product design to help your idea come true. - Sensors, IoT, and specific designs to run ML models. - Reverse engineering and optimization

Hi I am 4 years experienced electrical design engineer , I am have well knowledge in electrical circuit development. For panel board like DG sync panel, MV panel, HT panel ,VFD and PLC panels etc.. Read more

Hi I am 4 years experienced electrical design engineer , I am have well knowledge in electrical circuit development. For panel board like DG sync panel, MV panel, HT panel ,VFD and PLC panels etc..

I have developed many products for both companies and individuals. Everything from DNA detectors and atomic force microscopes to vending machines and wearable electronics. I develop products that requ... Read more

I have developed many products for both companies and individuals. Everything from DNA detectors and atomic force microscopes to vending machines and wearable electronics. I develop products that require electrical engineering, mechanical engineering and software development.

Hello! I am engaged in the development of drawings for electrical systems and communication networks. I have more than two years of experience. I can also make drawings of actually completed work. I w... Read more

Hello! I am engaged in the development of drawings for electrical systems and communication networks. I have more than two years of experience. I can also make drawings of actually completed work. I will be glad to cooperate.

Professional Engineer with a focus on MEP/Transportation. Design focus includes site electrical infrastructure, building interior electrical systems and electrical overhead and underground utility de... Read more

Professional Engineer with a focus on MEP/Transportation. Design focus includes site electrical infrastructure, building interior electrical systems and electrical overhead and underground utility design. Typical product includes construction drawings and/or calculations. Electrical design skills include the following: - Electrical equipment fit-out and specifications - Cable, conduit and equipment sizing, protection and installation - Site electrical utility layout and infrastructure - Construction cost estimation - Interior and exterior lighting design - Design compliance in accordance with the National Electric Code or National Electric Safety Code - Familiarity with public agency design standards and requirements Previous projects in the following sectors: - Parks and public spaces - Building restorations - New housing development - Streetscape and roadway improvements - Rail systems infrastructure - Electric utility infrastructure - Marinas - Decorative sign and structure lighting Based out of New York City area.

Hi, My name is Alexey Malik. I have 12 years experience in the energy and industrial automation. I like to work with interesting projects. I have a Bachelors in electrical engineering from Odessa... Read more

Hi, My name is Alexey Malik. I have 12 years experience in the energy and industrial automation. I like to work with interesting projects. I have a Bachelors in electrical engineering from Odessa National Technical University, in the Ukraine. Listed below are my experience and skills. - lighting design; - questions on electricity; - automation; - design of electrical networks of low and high voltage; - designing internal and external electric power supply; - design of equipment for alternative energy sources; - develop logic devices; - development of microcontroller-based devices; Proficient with AutoCAD, AutoCAD Electrical, Dialux. I guarantee that the result of my work will fit the standard for the safe installation of electrical wiring and equipment that apply in your country. Over the past 6 years of my projects have been built and commissioned automation systems of two business centers in Odessa, Ukraine. I am responsible to the Client for his execution of works. Thanks for reading my portfolio before the end of. Good luck.

Spent the last several years leading development of new products for a startup. We'll do concept art, prototype design and go into production. I can assist in whatever stage you are currently in. I... Read more

Spent the last several years leading development of new products for a startup. We'll do concept art, prototype design and go into production. I can assist in whatever stage you are currently in. I specialize in mechanical engineering, but I also do electrical, PCB design, firmware and software.

https://www.▒▒▒▒▒▒.com/freelancers/~01f3b786d9eaae6d35/ Read more

https://www.▒▒▒▒▒▒.com/freelancers/~01f3b786d9eaae6d35/

I have extensive experience in: - Mechanical and electrical systems in a variety of forms. - several successful battery pack development projects (HEV, EV, lithium ion, Lead Acid, and NiMh) - electric... Read more

I have extensive experience in: - Mechanical and electrical systems in a variety of forms. - several successful battery pack development projects (HEV, EV, lithium ion, Lead Acid, and NiMh) - electrical testing systems for batteries and electrical harnesses - mechanical and electrical controls for waste to power systems - manufacturing process development of fixtures, cnc programs, tooling selection, specialized equipment development for unique processes (benchtop rifling) - automation systems like grippers and actuators controls hardware setup like pneumatics

Credence Tek is a group of dedicated engineers in the areas of electronic systems, board design, pcb layout design, software and web design. We have a collective experience of 20+ yrs in the electroni... Read more

Credence Tek is a group of dedicated engineers in the areas of electronic systems, board design, pcb layout design, software and web design. We have a collective experience of 20+ yrs in the electronic and software industries. Our areas of proficienty include: Electronics, Circuit design, PCB design, Software development, Website development. We would be glad to be your design partner and provide our services to the best of our capabilities. Skills: Hardware: Component engineering, Schematic design, PCB layout, BoM, Gerber, documentation.

05.2016-- Site Engineer • 616/1&2 passenger ferries building in Remontowa Shipbuilding (Gdańsk, Poland) – construction site supervision (complete electrical works with commissioning) 11.2015 – 0... Read more

05.2016-- Site Engineer • 616/1&2 passenger ferries building in Remontowa Shipbuilding (Gdańsk, Poland) – construction site supervision (complete electrical works with commissioning) 11.2015 – 05.2016 Electrical designer Development and preparation of technical documentation for production of electrical switchboards: • control and signaling circuit diagrams • one line diagrams • layouts • component selection 04.2014 – 11.2015 Site Engineer • Eagle cargo vessel modification and upgrade for OHT in Beihai shipbuilding Heavy Industry (Qingdao, China) – modification and commissioning of old generators switchboard, commissioning of new generators switchboard • FPF1 floating production unit modification and upgrade for Petrofac in Remontowa Shiprepairyard (Gdańsk, Poland) - construction site supervision (electrical works) – cable racks installation; cables laying and devices installation for systems: process control, fire & gas detection, emergency shutdown, telecom • Artic Fjell bulk cargo combi vessel building for EWOS in Crist SA (Gdynia, Poland) – motor starters testing

Working hard to be an Engineer. Interested in data communication and green energy. Member of IUT Mars Rover. Learning Python (Programming Language), Microsoft Excel, Adobe Illustrator, and Web Develop... Read more

Working hard to be an Engineer. Interested in data communication and green energy. Member of IUT Mars Rover. Learning Python (Programming Language), Microsoft Excel, Adobe Illustrator, and Web Development.

15 years of excessive experience in the marine, oil & gas, shipbuilding and offshore industries as Electrical Engineer, Marine Automation Officer, E&I Commissioning Engineer, Auditor. Webdesign / G... Read more

15 years of excessive experience in the marine, oil & gas, shipbuilding and offshore industries as Electrical Engineer, Marine Automation Officer, E&I Commissioning Engineer, Auditor. Webdesign / Graphic design / Digital Marketing / App Development - hobby.

Double Degree in Biomedical Engineering and Industrial Distribution. My education includes elements of Mechanical, Electrical, and Materials engineering with an emphasis towards biomedical application... Read more

Double Degree in Biomedical Engineering and Industrial Distribution. My education includes elements of Mechanical, Electrical, and Materials engineering with an emphasis towards biomedical applications and design. I further focused my studies towards mechanical engineering and design.

DynamicsLK is a engineering design and development studio with multi-talented engineers dedicated to engineer your ideas into reality. We would develop your idea into a tangible product through design... Read more

DynamicsLK is a engineering design and development studio with multi-talented engineers dedicated to engineer your ideas into reality. We would develop your idea into a tangible product through design, simulation and development cycles. Among our members there are mechanical, mechatronics, electrical and software engineers, graphics and animation artists, highly skilled manufacturing experts who are willing to go above and beyond to reach your objectives. Feel free to contact us regarding your project. Thank You, Have a nice day

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching... Read more

I am Alice White, Business Development Executive at Raywell Studio. I have expertise in Email Marketing, Lead Generation, Data research, Linkedin, Scrapping tools. Additionally, I am also approaching overseas clients, take the follow-ups, and generate new business. Raywell Studio Pvt Ltd. provides a full range of BIM, Engineering, and Visualization services for a wide variety of Construction Projects. Raywell Studio believes that trust, communication, and collaborative working are key to successful project delivery. We have experience working in a dynamic & complex projects environment and are proud of our strong and lasting relationships with our clients and able to work with key clients closely. As a global BIM expert, we offer 3D-4D-5D and production of Architecture, Structural & MEP Engineering services. We assist some of the International Design-Build and General contracting firms in the USA & Middle East for their projects across the globe. Alice White * www.raywellstudio.com * ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ * https://www.linkedin.com/company/raywellstudio/

I believe that courage, passion and non-conformity are fundamental in everything in my life. With that, I always try to give the best of myself, using my knowledge in engineering, projects, commitment... Read more

I believe that courage, passion and non-conformity are fundamental in everything in my life. With that, I always try to give the best of myself, using my knowledge in engineering, projects, commitment and excellence for the best results.

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation Read more

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

I am a Mechatronics Engineer specializing in mechanical and electrical design. I have extensive experience using SolidWorks for precise and efficient development and design of mechanical systems. Addi... Read more

I am a Mechatronics Engineer specializing in mechanical and electrical design. I have extensive experience using SolidWorks for precise and efficient development and design of mechanical systems. Additionally, I work on designing electrical and electronic circuits, including printed circuit boards (PCBs) using Proteus software. I excel at integrating mechanical and electronic aspects to achieve innovative and effective solutions for engineering projects.

I am a professional Electrical & Electronics engineer with more than 8 years of experience in Electrical Engineering, Instrumentation, Control systems, Software development and related work. I have wo... Read more

I am a professional Electrical & Electronics engineer with more than 8 years of experience in Electrical Engineering, Instrumentation, Control systems, Software development and related work. I have worked in the following areas - HV & LV systems engineering (Switchgear & Controls) - Process Instrumentation - Programmable Logic controllers - SCADA systems programming, HMI Design - Data Acquisition Systems - Software development for interfacing with field instruments through Data Acquisition Systems. - Electronics Schematics, PCB design

Greg Fannon LCIBSE EngTECH An Electrical Engineer with over 7 years experience working within the Industry on projects from various sectors including; Commercial, Residential, Healthcare, Education &... Read more

Greg Fannon LCIBSE EngTECH An Electrical Engineer with over 7 years experience working within the Industry on projects from various sectors including; Commercial, Residential, Healthcare, Education & Leisure. Proactive and able to work very well in a team of other engineers to ensure projects are delivered exactly to the clients requirements. Serving as an electrician before moving into a design practice has better enabled career development and understanding when considering how to approach each project. Experienced in delivering projects both from early concept stage; through to tender and detailed design. Liaising with all members of the design team to meet client targets and coordinate project services. Greg has worked on various large scale projects. Competent using a number of design packages including: - Revit - AutoCAD - Dialux - Amtech - BlueBeam Revu Currently a member of CIBSE (Licentiate) and has achieved EngTECH status.