Hire the best freelance Hydraulic Engineering expert designers for your company

With a dynamic career as a Civil Engineer and Drafter spanning over six years, I bring to the table a wealth of experience, a strong commitment to precision, and a passion for exceeding expectations.... Read more

With a dynamic career as a Civil Engineer and Drafter spanning over six years, I bring to the table a wealth of experience, a strong commitment to precision, and a passion for exceeding expectations. My journey started in 2016, and since then, I've worn multiple hats, from inspection and testing roles to drafting and designing for complex projects. My current role as a Project Engineer involves overseeing a team of design engineers on large-scale industrial site development projects. This diverse experience has shaped me into a versatile professional who is comfortable navigating the many facets of civil engineering. In terms of technical skills, my proficiency with AutoCAD and Civil 3D sets me apart. This mastery was honed through my time as a drafting professor, a role in which I developed a comprehensive curriculum and wrote over 800 pages of material. This experience not only deepened my own knowledge but also equipped me with the skills to communicate complex concepts effectively. Among my notable projects are Amazon distribution centers, Domino's stores, and public water and sewer mains spread across Oregon, Western Washington, and as far as Tennessee. Each project has sharpened my ability to conduct detailed stormwater and wastewater management solutions, site grading, road design, sewer lift stations, and many other tasks, all of which are completed with rigorous attention to detail and a commitment to delivering results on time and within budget. Educationally, I hold a bachelor's degree in civil engineering with a minor in applied physics from an ABET accredited institution. Graduating summa cum laude, I proved my dedication to my field and my commitment to achieving high standards. My strengths lie not only in my technical abilities but also in my strategic approach to project management and my meticulous attention to detail. I kick off projects with a comprehensive schedule, identify critical paths and target dates, maintain consistent communication with clients, and ensure all discussions are documented for future reference. I am proud to be a licensed Professional Engineer (PE) in Washington, and I am ready to secure licensure in other states according to the project's needs. My approach to work is characterized by a commitment to transforming clients' visions into reality, delivering aesthetic and sustainable designs within the agreed timeframe and budget. In my free time, I nurture my love for learning, dabbling in coding, indulging in my passion for physics and science, playing chess, and enjoying tennis. These interests add a unique dimension to my professional skillset, as I continually seek to learn, grow, and bring fresh perspectives to my work. In every project I undertake, I strive to embody the principles of excellence, integrity, and sustainable practices. Your vision is my mission, and I look forward to crafting engineering solutions that exceed your expectations.

Experienced Computer Aided Design Design Engineer with a demonstrated history of working in the mechanical or industrial engineering industry. Skilled in AutoCAD Mechanical, SolidWorks,CATIA V5,ProE a... Read more

Experienced Computer Aided Design Design Engineer with a demonstrated history of working in the mechanical or industrial engineering industry. Skilled in AutoCAD Mechanical, SolidWorks,CATIA V5,ProE and Computer Aided Engineering (FEA & CFD) Ansys.

I'm a design engineer based in Ireland. I have 15 years of Solidworks experience working and designing heavy equipment. I'm an expert in: Weldments Sheet-Metal design Assembly design Mechanical Engin... Read more

I'm a design engineer based in Ireland. I have 15 years of Solidworks experience working and designing heavy equipment. I'm an expert in: Weldments Sheet-Metal design Assembly design Mechanical Engineering Simulation Hydraulic circuits I additionally have conventional 3D modelling experience in blender, making models for games, PBR texturing, rigging, animations and rendering.

I've worked for a range of clients from around the world. My objective is to address each project with a high level of detail and accuracy in order to support each customer. I strive to be professiona... Read more

I've worked for a range of clients from around the world. My objective is to address each project with a high level of detail and accuracy in order to support each customer. I strive to be professional in all of my work arrangements. Each project is an opportunity to make a positve mark on the world.

I have a bachelor's degree in mechanical engineering and a master's degree in microcontroller programming. I devoted a lot of time to modeling aircraft components. Spatial thinking is well developed.... Read more

I have a bachelor's degree in mechanical engineering and a master's degree in microcontroller programming. I devoted a lot of time to modeling aircraft components. Spatial thinking is well developed. Now I am a practicing pneumatic engineer, which means that I work with my hands in matters of assembly and repair.

Civil Engineer with over 20 years experience in the design of roads and drainage works, developing projects Urban and Rural Roads, Drainage Systems, Hydraulic Channels, Earth Movements and Digital Ter... Read more

Civil Engineer with over 20 years experience in the design of roads and drainage works, developing projects Urban and Rural Roads, Drainage Systems, Hydraulic Channels, Earth Movements and Digital Terrain Models (gradings); with advanced use of software design and documentation of civil engineering, AutoCAD Civil 3D, in workflows BIM (Building Information Modeling). Ingeniero Civil con más de 20 años de experiencia en el diseño de Obras de Vialidad y Drenajes, desarrollando proyectos de Vías Urbanas y Rurales, Sistemas de Drenajes, Canales Hidráulicos, Movimientos de Tierra y Modelos Digitales de Terreno (explanaciones); con un avanzado empleo de software de diseño y documentación de ingeniería civil, AutoCAD Civil 3D, en flujos de trabajo de Modelado de información para la construcción (BIM).

Hydraulic engineer with excellent critical thinking skills to identify alternative approaches and solutions to complex problems. Experienced in handling engineering software for residential and indust... Read more

Hydraulic engineer with excellent critical thinking skills to identify alternative approaches and solutions to complex problems. Experienced in handling engineering software for residential and industrial projects, such as AutoCAD Civil 3D, AutoCAD, EPANET, Hec-RAS, SWMM, CivilCAD, ArcGIS, IBER, Hec-HMS. Skilled at handling surveying instruments such as Total Station, GPS/GNSS, Laser Level. With a good level of understanding topographic and hydraulic information. Experienced in preparation of technical reports and design drawings and ability to achieve the objectives in the stipulated times

He has extensive experience across a range of hydraulics, water distribution networks, computational fluids dynamics (CFD), water quality, transients (surge), and water/wastewater treatment plants hyd... Read more

He has extensive experience across a range of hydraulics, water distribution networks, computational fluids dynamics (CFD), water quality, transients (surge), and water/wastewater treatment plants hydraulics. Also, he has experience in many engineering software such as WANDA, HAMMER, Flow 3D, Autodesk CFD simulation, Infoworks ICM, Micro-drainage, WaterGEMS, SewerGEMS, Strom CAD, Civil 3D, Infraworks, Flow-master, Culvert Master, EPANET…etc

I hold Masters in Mechanical Engineering degree from UK and have over 5 years of experience in Mechanical Design and Manufacturing. I can design a New innovative product within the domain of Mechanic... Read more

I hold Masters in Mechanical Engineering degree from UK and have over 5 years of experience in Mechanical Design and Manufacturing. I can design a New innovative product within the domain of Mechanical Engineering. I can also help you in improving an existing product to enhance its features and reduce manufacturing cost. I am excellent in 3D modelling, 2D drawings, mechanical engineering calculations and hydraulic engineering. I can also validate designs using Finite Element Analysis. I am proficient in PTC Creo, Abaqus, Microsoft Office, Powerpoint and MS Project. I can create presentations and technical reports for engineered products or research. I have over 5 years of experience in product design and manufacturing, mainly in the Oilfield Equipment Design. Highly competent in designing Slickline, Wireline, Well Testing and Well Servicing Equipment. I am also very well familiar with DNV 2.7-1 standards for Offshore Equipment design and certification.

We are the team of highly professional Architects\Civil\Structural\Hydraulic engineers with 8+ years of experience in the field Read more

We are the team of highly professional Architects\Civil\Structural\Hydraulic engineers with 8+ years of experience in the field

15 years engineering experience in a top machine building company. 5 years course at Tomsk nontechnical university as a mining engineer. Excellent diploma. Very skilled at welding and machining projec... Read more

15 years engineering experience in a top machine building company. 5 years course at Tomsk nontechnical university as a mining engineer. Excellent diploma. Very skilled at welding and machining projects, as well as hydraulic engineering. Can supervise other enginners as a skilled and expirienced engineer. Skilled in webex and ▒▒▒▒▒.

I’m an Engineer & Architect designer, 3D Architectural Visualization artist locatet in Tirana, Albania. Starting as an Engineer since my degree in Architecture in 2007 and as a regular freelancer sinc... Read more

I’m an Engineer & Architect designer, 3D Architectural Visualization artist locatet in Tirana, Albania. Starting as an Engineer since my degree in Architecture in 2007 and as a regular freelancer since 2012 in my country. Im serious, very hard worker and fully dedicated to my work experience in many project: Sewer Design & Hydraulic Engineering Healthcare Facilities Residential Developments Electrical Projects Public Spaces, Plazas and Parks Landscape / Urban Religious Facilities; Mosque / Churches and Synagogues Residential Homes Large and Small Restoration of Buildings and Monuments

Professional civil engineer specializing in hydraulic resource management from the National University of Colombia, with over seven years of experience in feasibility and advice of hydrologic studies,... Read more

Professional civil engineer specializing in hydraulic resource management from the National University of Colombia, with over seven years of experience in feasibility and advice of hydrologic studies, hydraulic modeling and hydraulic structures design. I have experience in design and advice in road drainage works, tunnels drainage systems, transfer of wet networks, sewers, modeling and design of hydraulic works in torrential rivers, design of shore protection works. Software used CIVIL 3D, HEC-RAS, HY-8, RAMMS. Additionally, in the attached certifications there are designs of hydrosanitary networks and rainwater managment in different types of buildings. I have experience in designing fire fighting network taking into account current colombian and international regulations. sotware used REVIT, EPANET. Finally, I have experience in the processing and analysis of hydrological information, uses and types of soils in basins, stochastic methods for estimating rainfall and flows. The above analyzes are suitable for flood hazard studies, enviromental impact studies, hydrological advice on extreme events. Software used ARCGIS, PYTHON, HEC￾HMS

Inventor on U.S. patent 9,688,516 (granted in 2017). Inventor on U.S. patent 9,732,820 (granted in 2017). Professional Engineer License in Mechanical Engineering from the State of Louisiana (issued in... Read more

Inventor on U.S. patent 9,688,516 (granted in 2017). Inventor on U.S. patent 9,732,820 (granted in 2017). Professional Engineer License in Mechanical Engineering from the State of Louisiana (issued in 2007). Professional Engineer License in Mechanical Engineering from the State of Ohio (issued in 2020). Chairman of the American Petroleum Institute Specification 2C re-write committee (task group). Experience with numerous technical specifications such as AWS, API, ASME, ANSI, AISC, DNV, ABS, LR, BV, EEMUA, MARPOL, etc. 18+ years of hydraulic, pneumatic, and electrical design for offshore equipment. • Hydraulic experience includes both open-loop and closed-loop systems (piston, gear, vane, etc.) • Electrical experience includes hazardous area classifications such as, NEC Class 1, Divisions 1 & 2; IEC Class 1, Divisions 1 & 2, and ATEX. Software experience: Microsoft Office, MathCAD, AutoCAD Mechanical, Autodesk Inventor, Automation Studio, AutoCAD Electric, Algor, ANSYS

I have experience in design of concrete mixers, hydraulic presses, gearboxes, conveyors and custom industrial equipment Read more

I have experience in design of concrete mixers, hydraulic presses, gearboxes, conveyors and custom industrial equipment

Paac geotechnical consulting is located in Cardiff , 33 Plantagenet street CF116 AS Cardiff U.K. ; Website: http://imppitasi.wix.com/geotechnical; Legal form: Sole trade . It is a young firm which... Read more

Paac geotechnical consulting is located in Cardiff , 33 Plantagenet street CF116 AS Cardiff U.K. ; Website: http://imppitasi.wix.com/geotechnical; Legal form: Sole trade . It is a young firm which provides a comprehensive specialist consulting service in geotechnical field to a wide range of clients including consultants, contractors, government departments and agencies, private and public companies, legal practices and research organisations. His approach is to offer a affordability of service , identifying alternative options that could result in savings to project cost. You will find in it the expertise and professionality of a large structure, but the flexibility, availability and affordability of services typical of a small team . Thus, it can give you the followings geotechnical services for managing the geotechnical risk through the different stages of a project : - Statement of Intent (SOL)( Initial review ); - Primarily Sources Study Report (Desk Study) or (PSSR) and Geotechnical investigation report ( GIR )( Preliminary certifications) - Geotechnical Design Report or (GDR) and Strengthened Earthworks Appraisal Form (SEAF) with these kinds of structural designs:  Retaining walls in reinforced concrete and in contiguous piles with Rock anchors;  Shallow and deep foundations;  Piled raft foundations;  Analysis stability of slopes and excavation fronts;  Techniques for improving stability and safety of slopes: nailing soil, horizontal reinforcement;  Calculation of embankment stability and settlement;  Roads and pavement engineering  Hydraulic adjustment of soil;  Techniques of soil improvement; - Geo - Environmental Interpretative report; - Site supervision; - Training courses via ▒▒▒▒▒ on geotechnical topics for companies , consultants and students; If you need of a quote of its services, you can send him an email .

Registered Professional Engineering Services providing company located in Mississauga, ON, Canada. Our services include but not limited to Mechanical, Hydraulic and Electrical Engineering. Our team ca... Read more

Registered Professional Engineering Services providing company located in Mississauga, ON, Canada. Our services include but not limited to Mechanical, Hydraulic and Electrical Engineering. Our team can help you in CAD modeling, Drawing, FEA analysis and Technical Publications.

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but... Read more

I am a mechanical engineering with professional working experience in the automotive and motorsport industry (+2 years). I have been using mainly PTC Creo and Solidworks as 3D modelling software, but I also used Catia V5/6 in the academic field. Experience with Matlab as numeric software, and experience with PTC Creo Simulate and Abaqus as FEA Software. During my professional life I have been working on design of racing cars with particular focus on powertrain installation, cooling systems, hydraulic systems, CNC machined components and composite material made components and related jigs and toolings, 3D printed components. Currently working in the food processing industry and involved in the design of industrial machineries and related items (fluid machinery, system's dimensioning and layout design).

Help to design your needs easily, applicable and very detailed by Catia V5 or Solid Works. And also delivery the project in timely to client. Read more

Help to design your needs easily, applicable and very detailed by Catia V5 or Solid Works. And also delivery the project in timely to client.

18+ year of real-world on-the-job Mechanical and Civil Engineering experience. Design development from sketch to product. Strive for simple and efficient solutions. I love interesting and unusual c... Read more

18+ year of real-world on-the-job Mechanical and Civil Engineering experience. Design development from sketch to product. Strive for simple and efficient solutions. I love interesting and unusual challenges. For you: - Mechanical design - Sheet metal design - Hydraulic design - Weldments design - FEA analysis - Motion simulation and animation - 3D modeling, HD render, and animation - 2D Engineering drawings, BOM Many more services available! Feel free to contact me.

I am a Mechanical Engineer with following skills- Hydraulic Equipment Expert, AutoCAD(2D&3D) and Solidworks Modeling etc. Read more

I am a Mechanical Engineer with following skills- Hydraulic Equipment Expert, AutoCAD(2D&3D) and Solidworks Modeling etc.

11.2012 – current: design engineer «Antonov Company». - Design and development of mechanical flight control system units AN-178, AN-132D (cylindrical, angular and planetary gearboxes, ball-... Read more

11.2012 – current: design engineer «Antonov Company». - Design and development of mechanical flight control system units AN-178, AN-132D (cylindrical, angular and planetary gearboxes, ball-screw lifts, disengaging coupling for aircraft control system); - Installation of sensors that control regulations of flight control system elements; - Support of mechanical units during manufacture and tests; - Design of circuit hydraulic pipe installation on the aircraft AN-178; - Quality control and service life extension of AN-124 flight control system; - Analysis of the design and testing of hydraulic units with reliability problems;

Qualified Engineer with more than 25 years of experience in design and management. 3D CAD designer using AutoCAD and Autodesk Inventor, with in-depth knowledge of both designing for production and mod... Read more

Qualified Engineer with more than 25 years of experience in design and management. 3D CAD designer using AutoCAD and Autodesk Inventor, with in-depth knowledge of both designing for production and model making. I have worked in the hydraulic and maintenance industry. This gives my designs a practical reality. I can provide 3D model and manufacture drawings. My expertise includes but not limited to, - Design mechanical products. - Design Steel structure and apply stress analysis. - Design hydraulic power units. - Design hydraulic cylinders. - Design hydro-mechanical equipments.

I live in Pune, India & have professional experience of 6 months in Solidworks and industrial engineering. I have worked on 2 projects for designing of a hydraulic press & centrifugal fan blower. Read more

I live in Pune, India & have professional experience of 6 months in Solidworks and industrial engineering. I have worked on 2 projects for designing of a hydraulic press & centrifugal fan blower.

-Have a mechanical of mindset in design with over 8 years experience in mechanical maintenane engineering. - Improve the hydraulic system to lifting and lowering the clinker crane. -Bachelor's degree... Read more

-Have a mechanical of mindset in design with over 8 years experience in mechanical maintenane engineering. - Improve the hydraulic system to lifting and lowering the clinker crane. -Bachelor's degree in mechatronic

I have more than 15 years of experience on 3D manufacturable designes.I am a professional SolidWorks user. I can design machines from scratch and do the drafting for manufacturing. I have plenty of ex... Read more

I have more than 15 years of experience on 3D manufacturable designes.I am a professional SolidWorks user. I can design machines from scratch and do the drafting for manufacturing. I have plenty of experience with medical device and hydraulic powered machines.