Hire the best freelance Mechanical CAD Engineering expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Graduate as a mechanical engineer, with 7 years experience on mechanical design. Certified as professional on SolidWorks, member of ASME, Read more

Graduate as a mechanical engineer, with 7 years experience on mechanical design. Certified as professional on SolidWorks, member of ASME,

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like st... Read more

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like stress, fatigue, dynamic analysis. Also, I can do more simple jobs like 3D modeling, drawings. I participated in the design and fabrication of a Formula Student car. Also, I competed in the Formula Student competition. I have experience in 3D modelling, product design, fabrication and product development. I can do reports, calculations, FEA, dynamic simulations, presentations. I have experience working in an engineering company. I design products that satisfy the client's needs.

I am Mechanical Engineer with a passion of Designing and Simulation,I learned different CAD software during my bachelors degree and want to use the knowledge of designing in freelancing. I am offerin... Read more

I am Mechanical Engineer with a passion of Designing and Simulation,I learned different CAD software during my bachelors degree and want to use the knowledge of designing in freelancing. I am offering designing and simulation services for all cases, particularly for manufacturing and optimization of product with material science. Thanks

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowle... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

hello , I am mechanical engineer and I hold bachelor degree in mathematics and physics, with a lot of experience using Solidworks, AutoCad and Inventor since 8 years ago, in previous work I designed a... Read more

hello , I am mechanical engineer and I hold bachelor degree in mathematics and physics, with a lot of experience using Solidworks, AutoCad and Inventor since 8 years ago, in previous work I designed a mechanical parts, FEA analysis, Simulation, also I done render using blender and mixing it with the aforementioned softwares just by experimenting. I love videogames,build computer, do sport and watch movies with my friends. I like learn new thing just for curiosity like chinese or python (programming language). I am available for an interview Monday to Friday 10 am to 12pm (UTC + 10:00 time zone). I look forward to having the opportunity to discuss the job further.

I'm a mechanical design engineer & Certified SolidWorks Expert (CSWE). I've more than 5 years experience in Engineering, Design, Product Development, Prototyping & 3D Printing & Manufacturing process.... Read more

I'm a mechanical design engineer & Certified SolidWorks Expert (CSWE). I've more than 5 years experience in Engineering, Design, Product Development, Prototyping & 3D Printing & Manufacturing process. I've completed my Bachelor degree in Mechanical Engineering from Khulna University of Engineering & Technology (KUET). Currently, I'm working as Design Engineer at Pran-RFL Group. I'm honest, hardworking, energetic & sincere in my work. My communication skill is good enough. I can take different types of stress. As a whole, I enjoy simple living.

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves,... Read more

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves, Pneumatic/Hydraulic Cylinder and Linear Sensors using CAD, FEA and Engineering analytical tools. My work include 3D Design / Modeling of parts and assemblies, 2D Manufacturing Drawings (close fit tolerances, geometric tolerances, stack up analysis), Developing / Evaluating / Optimizing Prototypes, Selecting suppliers. My project management, communications and engineering skills will be a great asset to complete your projects with high quality service in a timely manner.

I am full time freelancer as CAD Designer with 6 years CAD design experience. My major field in checking fixture jig design for automotive parts. I would like bring excellent experience & my knowledge... Read more

I am full time freelancer as CAD Designer with 6 years CAD design experience. My major field in checking fixture jig design for automotive parts. I would like bring excellent experience & my knowledge in new profession as freelancer. Below are some hightlights of my background :- 1) 4 years experience in tooling design (checking fixture jig). Involve design project with several automotive company such as PROTON, PERODUA, HONDA, TOYOTA. I'm also do reverse engineering with aircraft company (Malaysia Airlines Berhad) 2) 2 years experience in product design (automotive part). Involve in design HVAC UNIT ASSY (vehicle aircond system) & SEAT ASSY for automotive company (PROTON) With proven knowledge in designing's systems, i will deliver successful skill & design task for client come with GOOD price & GOOD leadtime. My Point of view :- DESIGN FOR THE FUTURE Thank you and Regards FAIZAL MOKHTAR

Pure-Mechatronics commenced operations in 2017. From a beginning of design, build and conduction of solar panel structures and factory related mechanical engineering design, troubleshooting and projec... Read more

Pure-Mechatronics commenced operations in 2017. From a beginning of design, build and conduction of solar panel structures and factory related mechanical engineering design, troubleshooting and project leading services, we have grown to have a broad base offering in electro-mechanical engineering services to companies and individuals in both regional and city based locations. We are eager to work with you.

I am the mechanical Design engineer, successfully completed various design engineer projects like the design of two-stage reduction gearbox for automatic transmission of ATV (All Terrain Vehicle), Cam... Read more

I am the mechanical Design engineer, successfully completed various design engineer projects like the design of two-stage reduction gearbox for automatic transmission of ATV (All Terrain Vehicle), Camshaft design with the help of Creo parametric 3.0. I make various automobile parts like hubs, knuckles, transmission assembly. I was graduated from DBATU (first class) and also completed Post Graduation Diploma in Certified Design Engineer from Cadcamguru Solutions Pvt. Ltd. I studied various software like CATIA V5R20, CREO Parametric 3.0, Solidworks 16, UGNX 11 and Ansys Workbench 16.

▪ Responsible for the execution of 3D CAD Design projects in industrial automation and metalwork ▪ Execution, inquiring and purchasing of technical drawings in 2D CAD for the production of mechanical... Read more

▪ Responsible for the execution of 3D CAD Design projects in industrial automation and metalwork ▪ Execution, inquiring and purchasing of technical drawings in 2D CAD for the production of mechanical components ▪ Preparer in CAM for component machining in CNC ▪ Sizing, inquiring and purchasing equipment for integration ▪ Responsible for the construction and Assembly of industrial equipment and structures ▪ Management and planning of projects ▪ Surveys, budgeting and project billing according to the customer's needs

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thou... Read more

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thought it would be great to share my knowledge. As the saying goes, "If you're great at something, don't do it for free." Look forward to working with you!

Certified Dassault Systèmes Solidworks Professionnel Mechanical design. Ex Aeronautical & Mechanical engineering teacher UMC university Algeria. Senior Mechanical Design Engineer at Metal Rhum, Alge... Read more

Certified Dassault Systèmes Solidworks Professionnel Mechanical design. Ex Aeronautical & Mechanical engineering teacher UMC university Algeria. Senior Mechanical Design Engineer at Metal Rhum, Algeria

Hello there I am elkeysar mechanical engineer designer With skills in solidworks, solidcam, camworks, Ansys, coreldraw, swansoft, cnc programing I worked in many projects as designing enclosers for e... Read more

Hello there I am elkeysar mechanical engineer designer With skills in solidworks, solidcam, camworks, Ansys, coreldraw, swansoft, cnc programing I worked in many projects as designing enclosers for electronics, renew a full technical drawingscatalog, designing a luggage able to be resized with all details from sketches to the manufacturing..etc. My goal is to be creative always in my work and providing the perfect to my clients.

I work as a product design engineer. I have good grasp in technical process specially in fabrication. I am a flexible person, straightforward, and result oriented. Communication is the KEY on this kin... Read more

I work as a product design engineer. I have good grasp in technical process specially in fabrication. I am a flexible person, straightforward, and result oriented. Communication is the KEY on this kind of setup. Here is a list of things I can help you with CAD software. •Part drawing •Assembly drawing •Installation/ assembly manual •Product presentation •3D concept design •Dimension •File Conversions

I am a Design Engineer with experience in aerospace and automotive industries. CAD, modeling and product development is something I specialize in. I find enjoyment in it and coming up with design solu... Read more

I am a Design Engineer with experience in aerospace and automotive industries. CAD, modeling and product development is something I specialize in. I find enjoyment in it and coming up with design solutions for your needs. I look forward to collaborating with you.

Hi, I'm Mariano Garcia. I am a specialist in mechanical design with more than 10 years of experience designing special machines, jigs and fixtures, special parts and devices. I'm a CNC Programmer and... Read more

Hi, I'm Mariano Garcia. I am a specialist in mechanical design with more than 10 years of experience designing special machines, jigs and fixtures, special parts and devices. I'm a CNC Programmer and i offer profesional CAM solutions. Also I have a machining workshop with cnc machines. All to make your projects come true. I want to provide innovative solutions in mechanical engineering projects and generate long-term relationships with customers.

The past few years I have been working as a Mechanical Engineer where my area of expertise is electronics packaging. I have a history of success taking products through all phases of development; from... Read more

The past few years I have been working as a Mechanical Engineer where my area of expertise is electronics packaging. I have a history of success taking products through all phases of development; from concept to prototype, to manufacturing. I have a history of success in product design, prototypes, and preparation for manufacturing. I have a successful record of bringing projects through all phases of development including customization and troubleshooting. With over 8 years of Mechanical Engineering experience, I have worked in design and research and development roles doing various 3D CAD modeling and drawings. I have also worked in the machine shop programming CNC's and in production manufacturing environments. My area of expertise is electronics packaging, power junction boxes, EMI protected designs, sheet metal boxes, hogged out Al boxes, custom enclosure, or off the shelf reworks. Let me know how I can help you get your project done; I look forward to hearing from you.

I graduated from the University of Arkansas in the Spring of 2016 with a BS in Biomedical Engineering with Pre-Med distinctions. I hold minors in English, History, and Mathematics. While attending Uni... Read more

I graduated from the University of Arkansas in the Spring of 2016 with a BS in Biomedical Engineering with Pre-Med distinctions. I hold minors in English, History, and Mathematics. While attending University I contributed part time as an Undergraduate Research Assistant for Dr. Narasimhan Rajaram Ph.D. in the development of optical imaging instrumentation and biomarkers for cancer diagnosis and monitoring tumor response to therapy. My primary curriculum focus included Neurology, Nano technology, Advanced Prosthesis, and integration of bio technologies involving the neurological pathways, 3D design, 3D printing, CAD drafting, Structural engineering, and Mechanical Engineering techniques. I currently hold the position of Design Engineer for Berkley Industries. My primary focus is developing new and innovative mechanical and Industrial devices for a myriad of clients for a variety of needs. I previously held the position of Principle Design Engineer for R&R Solutions in Gravette Arkansas. I oversaw in charge all engineering projects, and custom design projects from the initial concept to the production run. I had the privilege of holding a position with NX Utilities as the Regional Quality Engineer for the Midwest. I planned and directed activities concerned with development, application, and maintenance of quality standards for industrial design , materials, and products related to the fiber optic network pathways for major utility conglomerates. Before my NX days, I held the title of Engnieer/Designer for Advanced Lightening Technologies. I lead a team focused on R&D of advanced lightning protection systems using CAD and scale model simulations. In my spare time I enjoy being with my family, traveling to new places, country dancing, playing as many sports as possible, and the occasional Netflix binge.

i am professional mechanical engineer with first class. I am using cad from past decade. I am capable doing 2d, 3d, simulation motion animation. I have designed and developed more than 100 produ... Read more

i am professional mechanical engineer with first class. I am using cad from past decade. I am capable doing 2d, 3d, simulation motion animation. I have designed and developed more than 100 products . REGARDS kalp

Experienced Lead Mechanical Engineer in the Automotive Industry and Machine Tools Industry. Skilled in Mechanical Product Design and Development, CATIA, SolidWorks, Autodesk Inventor, CREO, Siemens NX... Read more

Experienced Lead Mechanical Engineer in the Automotive Industry and Machine Tools Industry. Skilled in Mechanical Product Design and Development, CATIA, SolidWorks, Autodesk Inventor, CREO, Siemens NX, AutoCAD & Solid Edge. Strong engineering professional, focused in Mechanical Engineering and Project Management

I am a Mechanical Design Engineer from Ireland. I have years of experience in Product Design and am 100% commited to producing high quality work for every project. Design is my passion! Read more

I am a Mechanical Design Engineer from Ireland. I have years of experience in Product Design and am 100% commited to producing high quality work for every project. Design is my passion!

Well, I am not really into (hard worker, stress handler …etc) kind of talk. I'd rather tell more about my actual experiences and leave the assessment stuff to you if I was of much luck! I started wor... Read more

Well, I am not really into (hard worker, stress handler …etc) kind of talk. I'd rather tell more about my actual experiences and leave the assessment stuff to you if I was of much luck! I started working (in that career) when I was 16 at Kadyco. for int. trade, I first assembled a production line on my own when I was 18 years old, I worked later as a technical support engineer at Artronix and a maintenance engineer at MedTecShop. For three years I had been working as technical support Engineer, Usually I was asked for tasks related to graduation projects of Engineering students, most of them were preferable to be sheet metal and every design should be studied to make sure it can handle the stresses applied. I participated in many youth initiatives at three universities (Al Azhar, Cairo and Ain-shams) till I became the president of AZEX 2016.

As an accomplished Mechanical Engineer with a wealth of experience in the field and a mastery of SOLIDWORKS design software, I have consistently demonstrated my ability to contribute to projects with... Read more

As an accomplished Mechanical Engineer with a wealth of experience in the field and a mastery of SOLIDWORKS design software, I have consistently demonstrated my ability to contribute to projects with innovative solutions, meticulous attention to detail, and a deep understanding of engineering principles. Throughout my career, I have leveraged my SOLIDWORKS proficiency to enhance product development, streamline manufacturing processes, and bring designs from concept to reality. Key Skills and Expertise: SOLIDWORKS Proficiency: With years of hands-on experience, I possess an in-depth understanding of SOLIDWORKS, utilizing its various modules and features to create intricate 3D models, assemblies, and detailed drawings. My ability to efficiently navigate the software empowers me to design complex geometries, ensuring optimal fit, form, and function. Design Optimization: I am skilled in employing SOLIDWORKS simulation tools to analyze and optimize designs for structural integrity, thermal performance, and fluid dynamics. This expertise enables me to identify potential design flaws early in the development process, saving valuable time and resources. Parametric Modeling: Leveraging the power of parametric modeling, I create adaptable and flexible designs that can be easily modified to accommodate design changes or variations. This approach enhances the agility of design iterations and accelerates the development cycle. Collaborative Workflows: My proficiency extends to SOLIDWORKS' collaborative features, facilitating seamless communication with cross-functional teams, stakeholders, and clients. I excel at sharing designs, gathering feedback, and incorporating revisions to ensure alignment with project goals. Design for Manufacturing (DFM): I have a keen understanding of DFM principles and utilize SOLIDWORKS to design products that are optimized for efficient manufacturing processes. This includes considerations for assembly, materials, machining, and production scalability. Assembly Modeling: I am adept at creating intricate assembly models, utilizing SOLIDWORKS' tools for interference detection, motion analysis, and virtual prototyping. This skill enables me to simulate real-world behavior, identify potential clashes, and validate product functionality. Detailed Drawings and Documentation: My expertise extends to producing comprehensive and accurate technical drawings, annotations, and documentation using SOLIDWORKS. This ensures that the manufacturing and assembly processes are well-guided and error-free. Innovation and Problem Solving: I thrive on solving complex engineering challenges and leveraging SOLIDWORKS to develop innovative solutions. Whether it's creating custom components, exploring alternative designs, or addressing unforeseen issues, my SOLIDWORKS proficiency enhances my problem-solving capabilities. Continuous Learning and Adaptability: In the rapidly evolving field of mechanical engineering and software development, I am committed to staying updated with the latest SOLIDWORKS features, enhancements, and best practices. My adaptability allows me to incorporate new techniques and tools into my workflow for continuous improvement.

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following service... Read more

Hi I am ubaid ,i am a Mechanical engineer and have over 3 years of experience in making 3D models,Mechanical design and analysis using solidworks,autocad,pro e,ansys i offer the following services design 3D models 3D rendering with high quality image 3D assemblies 3D animations 3D printing with checked stl files on shapeways simulations Make 2D drawings sheet metal working ,weldments i will be using soildworks visualize,photoview 360 and keyshot program for rendering Offers: unlimited revisions Quality work within the specified time frame