Hire the best freelance Mechanical Motion Study expert designers for your company

I attend Kettering University, a predominately engineering university once named General Motors Institute. From there I got a top class education paired with 3 years ofwork experience in my field. Whi... Read more

I attend Kettering University, a predominately engineering university once named General Motors Institute. From there I got a top class education paired with 3 years ofwork experience in my field. While a lot of my work was hands on, I acted as my companies only CADD professional throughout my entire work experience. I am more than able to create any design you can imagine.

Apart from a degree in Mechanical Engineering and an analytical mind, a competent design engineer also has important soft skills. For instance, they have strong attention to detail and the ability to... Read more

Apart from a degree in Mechanical Engineering and an analytical mind, a competent design engineer also has important soft skills. For instance, they have strong attention to detail and the ability to deliver projects effectively and on time.

🔹 Liam Guinnane, living in Sligo, Ireland 🔹 Known elsewhere on the internet as 'CADNurd' 🔹 Portfolio of CAD Models on both GrabCAD and Thingiverse 🔹 Genuinely passionate about Climate-Change 🔹 S... Read more

🔹 Liam Guinnane, living in Sligo, Ireland 🔹 Known elsewhere on the internet as 'CADNurd' 🔹 Portfolio of CAD Models on both GrabCAD and Thingiverse 🔹 Genuinely passionate about Climate-Change 🔹 Seeking work in either the Carbon-Reduction or Education sectors 🔹 SolidWorks 3D Modeler - CSWA Qualified 🔹 Pro-AI

Skills: Problem solving Critical thinking Cad Communication Achivement: Cad modelling winner 🏆 - TEPIC'24 @Central Institute of Petrochemicals Engineering & Technology Projects: ->Hydraulic Pan... Read more

Skills: Problem solving Critical thinking Cad Communication Achivement: Cad modelling winner 🏆 - TEPIC'24 @Central Institute of Petrochemicals Engineering & Technology Projects: ->Hydraulic Pan and tilt ->3d concrete printer

Mechanical Engineer with 7.28 CGPA with 2+ years of industrial experience and 1+ year of freelancing experience , capable of doing work in solid works 3d modelling , assembly , drafting , simulation ,... Read more

Mechanical Engineer with 7.28 CGPA with 2+ years of industrial experience and 1+ year of freelancing experience , capable of doing work in solid works 3d modelling , assembly , drafting , simulation , motion study.

Proficient in SolidWorks sheet metal, weldment, static simulation, assembly, motion study & 2D drafting. AutoCAD 2D & 3D Read more

Proficient in SolidWorks sheet metal, weldment, static simulation, assembly, motion study & 2D drafting. AutoCAD 2D & 3D

B.E. Mechanical; M. Tech CAD/CAM; 2D/3D Drafting; 3D Part Modelling; 3D Assembly; Machinery Design & Development; Motion Study; Finite Element Analysis; Solid Works; Solid Edge; Mechanical Design Calc... Read more

B.E. Mechanical; M. Tech CAD/CAM; 2D/3D Drafting; 3D Part Modelling; 3D Assembly; Machinery Design & Development; Motion Study; Finite Element Analysis; Solid Works; Solid Edge; Mechanical Design Calculation & selection of various Mechanical Elements; Pneumatics; Hydraulics; Robotics; Automation; Design for Manufacturing (DFM); Design for Assembly (DFA); Process planning; Time study; Project Planning

My name is Mohammed Abul Hassan. I have graduated at College of the North Atlantic – Qatar studying advanced diploma program in Mechanical Engineering Technology program. At present, i am pursuing Bac... Read more

My name is Mohammed Abul Hassan. I have graduated at College of the North Atlantic – Qatar studying advanced diploma program in Mechanical Engineering Technology program. At present, i am pursuing Bachelor of Science in Mechanical Engineering at Qatar University. Most people in the world have some goals in life. My aim in life is to become a mechanical design engineer. After I graduated high school, I became certain that I will pursue my higher education in mechanical engineering. The reason to study mechanical engineering is that, when I was in high school I was interested in Applied Math’s and physics. I like to apply theory which I studied in physics to solve real life problems. As a result, I have decided to study mechanical engineering. Moreover, I want interested to build hand-working skills in mechanical engineering. For this reason, I study at College of the North-Atlantic Qatar which is Canadian technical college. I have completed my advanced diploma in Mechanical Engineering Technology (industrial maintenance). In this diploma, I have learned a lot of industrial maintenance for example- reliable center maintenance, how the power plant system works, how to do maintenance in machinery equipment’s etc. Moreover, in final year I have learned how to build product from scratch. In my capstones project I build a hydraulic book lifting trolley. At first, I have done to research for the need of project. After that I calculated and design the model in 3-D software Catia V5. After finishing design I fabricated the project using college resources such as welding, fastening etc. These all techniques of fabrication I have learned in my diploma program. From this project I am interested to make career in design and manufacturing. After completion Diploma, I progressed towards B.Sc. Mechanical Engineering Degree completion at Qatar University. As a Mechanical Design Engineer, I have design and fabricated numerous projects, some of them highlighted below: -The aim of project is to design and simulate a solar powered water distillation system for rural communities in Somalia. The system consists of the evaporator, condenser, and storage tank for salty water, storage tank for distilled water, filter, pump and solar collector -The aim is to design a greenhouse that maintains the required climate to grow to tomatoes in hot and arid environments such as Qatar. The required climate includes the temperature, relative humidity, ventilation and carbon dioxide, lighting and thermal radiation, and so forth. The design is meant to meet the conditions at lower energy consumption and initial and operating cost so that to produce tomatoes that will be used for resale at a reasonable price and make profit. The design should also be reliable, have back-up systems, and be maintainable. Growing tomatoes and other crops in Qatar’s environment is important to increase food resources and production. -Aim of project describes computational and experimental investigation on the response of thin wall structures for energy absorption of car crash boxes. In this project, the tubes subjected to quasi-static axial loading. Many different cross-sectional structures have been studies to find optimal configuration for energy absorption. Initially, the Finite Element Analysis (FEA) model has been developed for different structures. From FEA model, Specific Energy Absorption (SEA) and Peak force has been estimated for different cross-sectional structures. To verify these performance parameters, quasi-static axial loading has been performed experimentally. Both foam-filled and without foam on different cross-sectional structures are implemented to study their effects on the performance parameters. The study used the aluminum alloy as a material to investigate the ability of using aluminum alloy in the energy absorption structures since the aluminum has lighter weight.

Design engineer in mechanical field with the following skills:- - Designing 2D and3D mechanical drawings - Simulation and motion study of mechanism - Successfully accomplished projects were designing... Read more

Design engineer in mechanical field with the following skills:- - Designing 2D and3D mechanical drawings - Simulation and motion study of mechanism - Successfully accomplished projects were designing of swagging machine, reverted gearbox and electrode feeder machine - I have a degree in bachelor of science in mechanical engineering.

I assume myself quite compatible with the common requirements of a job in this domain and possess all the necessary skills like 3D Modelling, drafting, analysis of components, the study of motion, kno... Read more

I assume myself quite compatible with the common requirements of a job in this domain and possess all the necessary skills like 3D Modelling, drafting, analysis of components, the study of motion, knowledge of ASME and ISO standards and also have a hands-on experience with tools like SolidWorks, AutoCAD, Fusion 360, Catia and ANSYS. I have attached my website below for your reference and to have a glance on my projects. https://sites.google.com/view/pratyushdesigns/home

i am mechanical design engineer working on solidworks and autocad software i have good knowledge and experience of designing on industrial plant, pollution control system, and Machines mechanism, i a... Read more

i am mechanical design engineer working on solidworks and autocad software i have good knowledge and experience of designing on industrial plant, pollution control system, and Machines mechanism, i am able to make 3d model, rendering, static analysis, flow simulation, motion study on movable mechanism and i can make 2d shop floor drawings for manufacturing and fabrication purpose for more information you can see my work and my skill on below link https://drive.google.com/folderview?id=1Apsi0lFXVuDys6CendaifqlANqWeKrtg

Hello, I am a graduated mechanical engineer with more than 9 years experience in manufacturing and design different products from sheet metal and structure steel! Certified SOLIDWORKS Mechanical Desig... Read more

Hello, I am a graduated mechanical engineer with more than 9 years experience in manufacturing and design different products from sheet metal and structure steel! Certified SOLIDWORKS Mechanical Design Professional. 🌟EXPERIENCE🌟 ⚙️ Cladding facade, ceiling from aluminum and different types of steel; ⚙️ Steel structures, different size and shape; ⚙️ Bank safes (serial manufacturing), metal furniture and different equipment from steel ; ⚙️ Development of projects by provided documentation (design calculation, design drawings, manual sketches, models from different CAD software); ⚙️ Modernization and improvement of the projects according to customer needs (offering the best technical solution, price-quality ratio); ⚙️ Parametric modeling; ⚙️ FEA (Static, Frequency). ⚙️Motion study. ⚙️Solidworks Animation. ⚙️Keyshot rendering.

Hello, My name is Muzammil Kamal. I'm a Mechanical Engineer-Graduate. I am using solid work, AutoCAD. I Can help you to make all parts for 3d cad and 2d cad. I will make it Faster and accurate like as... Read more

Hello, My name is Muzammil Kamal. I'm a Mechanical Engineer-Graduate. I am using solid work, AutoCAD. I Can help you to make all parts for 3d cad and 2d cad. I will make it Faster and accurate like as your Request and on schedule. I can make 3d Cad and 2d Cad from your picture or sketch with dimensions. I can Remake your files in STL format. ✅ Mechanical parts ✅ Parts Assemblies ✅ Extruded parts ✅ Automotive parts ✅ 3D parts ✅ 2D and 3D Sketch ✅ Structural Analysis (Stress analysis, Thermal analysis) ✅ Mesh Generation ✅ Study Motion (3D Animation/Simulation) I hope I can help you to finish your project. I am ready for long-term project and full-time project. Please look at my portfolio. I want to get good feedback from their customers. Thank you in advance for your time and consideration. I look forward to working with you soon!!! Best Regard Muzammil Kamal

Self-organized Mechanical Engineer who's been working on software for 5 years. I've worked on various projects at the company, freelance platforms in the field of 3D modeling, simulation, stress, flow... Read more

Self-organized Mechanical Engineer who's been working on software for 5 years. I've worked on various projects at the company, freelance platforms in the field of 3D modeling, simulation, stress, flow, motion, CFD analysis & Graphic Designing. I'm hardworking, fully devotional and passionate about what I do In order to do so, I'm willing to relocate for work. *I use Solidworks in the field of CAD & CAE.I design and then for analysis use the simulation product by Solidworks. *For 3D modeling, I use different techniques to generate complex structures & shapes that aren't usually generated by simple commands. For Kinematic Analysis I use the Motion study add-inn of Solidworks. *I also do CFD analysis of different fins, fans, planes, car models placed in the fluid or wind-tunnel for testing. *I also do CNC g-code generation using Solidcam add-in by Solidworks. *I also render these designs to give them a pure & realistic Look. Sometimes when 3D animations are needed, I even design that. *I also worked on Adobe software such as Photoshop, Premiere Pro, After Effects & Illustrator for Graphic designing, video editing & Visual Effects. I design Logos, brochures, banners, business cards & professional Photo editing. *I've worked on 3D modeling, animation & rendering in MAYA too, I mostly do modeling & Rendering on it given by required settings or environments. *For web development, I’ve worked on HTML, PHP & CSS for developing a charming & effective web for the audience.

I'm a mechanical engineering student with experience in solidworks software design, analysis, study motion and rendering for 3D models . Read more

I'm a mechanical engineering student with experience in solidworks software design, analysis, study motion and rendering for 3D models .

I am a Mechanical Engineering Graduate with adept skills in CAD & CAE softwares. I am good at a number of softwares. Softwares that I have in my PC at present and the skills and project experiences re... Read more

I am a Mechanical Engineering Graduate with adept skills in CAD & CAE softwares. I am good at a number of softwares. Softwares that I have in my PC at present and the skills and project experiences related are as follows: SolidWorks 2016:- - Completed a Product Design Diploma. - Reverse Engineered a 6-axis Manipulator. - Developed Kinematic Motion for the Manipulator. - Key skills: Sketch, Part Modelling, Assembly Modelling, Sheet Metal Design, Surface Modelling, Rendering, Reverse Engineering, Motion Analysis, Drafting, GD&T. CATIA V5:- - Successfully completed a certification course. - Designed a 6-axis Manipulator. - Key skills: Part Modelling, Assembly Modelling, Sketch, DMU Kinematics, Ergonomic Design, Rendering, Drafting, GD&T. ANSYS:- - Have version 12.0 and 16.0. - Imported data to Material Library for three new Composites. - Created Static Structural analysis for the three materials for comparative study. - Capable of working with Static Structural and Transient Structural platforms of ANSYS Workbench.

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

Hi, I'm Zeyad, a Professional Mechanical Design Engineer with over 2 years of experience in the field. I offer a range of specialized services to bring your ideas to life in 3D. I bring a strong foun... Read more

Hi, I'm Zeyad, a Professional Mechanical Design Engineer with over 2 years of experience in the field. I offer a range of specialized services to bring your ideas to life in 3D. I bring a strong foundation in engineering principles to my work. My expertise lies in SolidWorks, where I excel in 3D CAD modeling, drawing, motion study, FEA, animation, and rendering, adhere to ANSI and ISO standards to ensure the highest quality in my work. Have questions or need clarification? Don't hesitate to reach out! I'm here to assist you with any inquiries you may have.

Hello! My name is Kostiantyn (Kostia); I'm from Ukraine. I'm a mechanical design engineer. I have very good experience in 3D modeling with SolidWorks (12 years) in all modules for design (sheet metal,... Read more

Hello! My name is Kostiantyn (Kostia); I'm from Ukraine. I'm a mechanical design engineer. I have very good experience in 3D modeling with SolidWorks (12 years) in all modules for design (sheet metal, foundry, plastic production, welding, and other), Geomagic Design X (different complexity parts), engineering drawings. Briefly about myself, I work as a design engineer, experience – 13 years (from 2008), the designer of POS/POP materials displays – 3.5 years, foundry production – 5 years, reverse engineering – 5 years. I became a freelancer in August 2015. And along this time, I worked for different customers from all over the world (United States of America, Canada, Australia, Germany, China, Malaysia, Ukraine, and other countries). There is a list of some projects which I have done in 2016 (my first year in international freelance): •Aerodynamic Surface Modeling for UAV’s (Reverse Engineering from 3D Scanned Data and Improvement with another Airfoil Using) •Centrifugal Pumps Repair Part (3D Modeling and Technical Drawings with GD&T by ASME Y14.5-2009) •RC Cars Components (Mechanisms, Interior and Exterior Parts) •Organic Shapes Modeling (Fishing Lures) •Difficult 2D Drawings for Tramway Parts (Composite Exterior Panels, Sheet Metal Interior Parts, Assembly Drawings) •Wrought Iron Art Design with Drawings (for House in Melbourne, Australia) •Hydraulic Components •Metal Casting Parts •Plastic Molding Parts From 2016 I mainly concentrated on Reverse Engineering in Geomagic Design X in combining with SolidWorks and inspection in Geomagic Control X. I made more than 20000 parts of different complexity from 2016 in that CAD software. I also have more than 2000 subscribers of YouTube blogs about 3D Modeling, CAD, and Reverse Engineer. It's not small auditory for that kind of content. Some of my services are: •Design of 3D Models and drawings (SolidWorks); •Surface Modelling (SolidWorks, Geomagic Design X, Power Surfacing); •Reverse Engineering from 3D Scan (SolidWorks, Geomagic Design X, Power Surfacing); •3D Scan Inspection (Geomagic Contol X, GOM Inspect); •Metal Casting Process Simulation (NovaFlow & Solid, ProCAST); •Metal Casting Patterns and Core Boxes modeling with drawings (SolidWorks); •3D Rendering (KeyShot, PhotoView 360, Photoshop); •3D Animation (SolidWorks Motion Study, Snagit, VegasPro) Thanks for your attention! See you in your projects.

PROFESSIONAL PROFILE * Senior-level engineering analysis experience performing structural, response/vibration, dynamics, fracture and fatigue, and pressure vessel blast and fragmentation analysis in... Read more

PROFESSIONAL PROFILE * Senior-level engineering analysis experience performing structural, response/vibration, dynamics, fracture and fatigue, and pressure vessel blast and fragmentation analysis in the aerospace industry * Expertise in technical theory of mechanical engineering areas such as structural and dynamic analysis, fracture mechanics, material science, structural analysis methods as well as design for manufacturing * Experience in practical fundamentals such as manufacturing processes, product design and development, mechanical design, lifecycle testing and mass production techniques that reduce costs of goods while maintaining high levels of quality and reliability * Background in product development for medical devices, particularly in the areas of assistive technology and wheelchair mobility. Experience includes mechanical design, design for manufacturing and assembly, product durability testing and clinical trial study development. * Experience leading teams and projects through design cycles with a strong emphasis on team-based processes that promote collaboration through brainstorming sessions and peer reviews Type of services I can provide: • Structural/stress analysis of components/structures/systems using both linear and nonlinear analysis (using both FEA and analytical methods) to assess the structural integrity and/or provide redesign and optimization options • Dynamic analysis of systems (rigid body motion) to assess functionality, derive loads or calculate kinetic or kinematics of the system. • Lifecycle analysis including fatigue and fracture analysis (using FEA, NASGRO and analytical methods) of systems or components including both high cycle and low cycle fatigue, development of loads and load cycles as well as mitigation strategies • Structural dynamics analysis (using the FEA and analytical methods) including vibration and modal response of components and systems • Mechanical design and development of systems or components to meet functionality and structural integrity requirements • Development of custom analytical tools using Python, Excel or Visual Basic/Excel to meet the needs of the user whether that be a method for reanalyzing system for basic changes in configuration and/or loading, for calculating more complex scenarios and systems or for processing data from testing.

I have 7 years of industrial experience. I'm able to do 2D, 3D models in Solidworks and render in key shot mechanical engineering project, concept designing. solidworks weldments, sheet metal,... Read more

I have 7 years of industrial experience. I'm able to do 2D, 3D models in Solidworks and render in key shot mechanical engineering project, concept designing. solidworks weldments, sheet metal, mold designing. solidworks engineering drawings for manufacturing purpose. 3d printing and prototype designing. design your innovations and inventions idea in to solidworks models and drawing. photo realistic rendering. solidworks motion study, stress analysis and simulations.

Hello, I am a Product Design Engineer, I have 3+ years of experience in design industries while working with multiple design software's like - AutoCad - For 2D/3D Designs and Drafting, Isometric Des... Read more

Hello, I am a Product Design Engineer, I have 3+ years of experience in design industries while working with multiple design software's like - AutoCad - For 2D/3D Designs and Drafting, Isometric Designs, Flexible Electronic Circuit Design, Jigs and Fixture Design, Press Tool Design, Laser Cutting Design, Forming Tool Design, Punching Tool Design, - Solidworks / Catia - For 3D product design, Rendering, Analysis, Sheet metal Design, Molding Design, Weldment Design, Surface Design, Motion Study, Parts Design, Assembly Design. I have been working in Tier 1 automotive company, Providing Design solutions to many automotive OEM's. Do visit my instagram product design page namely 'productdesignpoint' for few of my design samples.

I am a result-oriented mechanical engineer with expertise in machine and product designs. I have years of experience in Computer Aided Design (CAD) using solidworks majorly and I'm always available to... Read more

I am a result-oriented mechanical engineer with expertise in machine and product designs. I have years of experience in Computer Aided Design (CAD) using solidworks majorly and I'm always available to profer solution to your design problems. Machine design has been my specialization right from the onset, this has given me the knowledge necessary to partner with you in that model you want to design. I have hands-on experience in part modelling, weldments, sheet metal, motion study or animation of machines which represents the major aspects of machine design. Let's work together and you will; -Stop experiencing late delivery of projects. - Always get the photorealistic images of your designs. - Have access to enough revisions thereby promoting satisfaction. - Enjoy effective and efficient communication periodically. - Get the complete mechanical and assembly drawings of your model including the bill of materials. Based on my previous projects, Here's a feedback from a client whom I designed a bicycle camera holder for; "Fred is an excellent and disciplined personnel. He was able to deliver the design earlier than the agreed time giving us the avenue to do necessary additions and revisions. I would definitely love to work with him again." [Babatunde Idris] About Me I am a mechanical engineer that specializes in machine and product design using solidworks. I have designed a lot of products involving sheet metals, weldments, part modelling, surfacing, etc. Being vast in these concepts, I have the necessary experience to design that model for you. My Skills Include; - Part Modelling -Product Design -Solidworks - 2D mechanical and assembly drawings - Rendering - Animation/ Motion Study I am always available to take on your projects and work with you. I have good communication abilities and you can check out my portfolio for samples of my previous works. Send me an invite now and accept my proposal so that we can get started.

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and... Read more

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and 6 axles vehicle. -Already available analytical approaches were studied: Elastic Curve Equation, Three-Moment Equation, and Beams on Elastic Foundation. - Experimental Rig setup was devised and results were compared with the computational methodology. - A research paper of this study was published in IBCAST-2016 Conference. b. FEA Study of Crane Out trigger Mat -Developed a finite element analysis procedure for simulation of stiffness behavior of foundations under large-scale loads. -The study was required for criteria building of ATPs for safe handling of the crane and its outriggers. -It was also published in the International Conference on Structural Dynamics & Vibrations (ICSDV-2014). c. Mathematical Modeling of 8 Axle Vehicle Steering - Mathematical modeling in MATLAB/SIMULINK for an eight- axle steering system to simulate the behavior while turning for 6DOF Steward Platform Motion Simulator. Mechanical Design Projects a. Landing Gear of a Light Aviation Grade RC Plane (Ongoing Project) - Mathematical modeling of landing gear placement and finalization of its configuration. - Mechanical component design of the nose and main landing gear deploying mechanisms with locking and unlocking arrangements at deployed and retracted positions as per QMS of AS-9100C. - Closing/Opening of landing gear stowage bay door with the same EMA of the nose landing gear. b. Mechanical Design - Modeling and designing of various mechanical structures/mechanisms using CAD modeling software. - Preliminary and detailed engineering calculations at the conceptual and detailed engineering phase of the project. -Validation of modeled systems through the aid of FEA tools (ANSYS/ABAQUS). -Taking projects through the Phases of Product Development Cycle (PDC) as per QMS of ISO or AS- 9100C.

I have 2 years and 4 month experience of CAD job in SolidWorks (Part design, Assembly, Drafting, Sheet Metal, Weldments, Motion Study etc.). Also, I have more than 1.5 years experience in CATIA-V5 (P... Read more

I have 2 years and 4 month experience of CAD job in SolidWorks (Part design, Assembly, Drafting, Sheet Metal, Weldments, Motion Study etc.). Also, I have more than 1.5 years experience in CATIA-V5 (Part design, Assembly, Drafting & Sheet Metal). I am a current employee of "3DTech Engineering Services" in Dhaka, Bangladesh. Here my responsibility is doing CAD Project by SolidWorks and CATIA-V5. Before this I worked as a "Mold Designer" in a local organization named "Tasfia Mold Workshop" in Dhaka, Bangladesh. I am a potential performer of CAD contest in Bangladesh. I get 1st Runner up prize in CAD Contest in "Ignition 2018: National Mechanical Festival" which is organized by Department of Mechanical Engineering, Khulna University of Engineering and Technology, Bangladesh. Also I get 1st Runner up prize in CAD Contest in "BME Fest '18" which is organized by Department of Biomedical Engineering, Military Institute of Science & Technology, Bangladesh.

I am a Mechanical Design Engineer with 9+ years of professional experience. I am well experienced in CATIA and SolidWorks. Currently working in New Product Development at professional level, I have... Read more

I am a Mechanical Design Engineer with 9+ years of professional experience. I am well experienced in CATIA and SolidWorks. Currently working in New Product Development at professional level, I have very good experience in design and converting the design into physical product. I can help you with the following tasks. ★ 3D Modeling (CAD). ★ Drafting / Drawing :- Production level drawings with GD & T. ★ Rendering :- 3D Visualization of Machine, Architecture , Furniture etc. ★ Kinematics Study :- Physical dynamics behavior in 3D simulation. ★ Stress Analysis. ★ 3D Printing Products. ★ Conversion of Design into drawings and Vice versa. ★ Conversion of different CAD file formats and more......... I will be there with you throughout your journey in making things valuable and productive Kindly get in touch.