Trusted by
$25/hr
Project Estimation Designer
As a high spirit civil engineer with Master's degree I have worked since 17 years ago in the field of design, supervising and implementation of steel and concrete structures as well as low rise and ta... Read more
As a high spirit civil engineer with Master's degree I have worked since 17 years ago in the field of design, supervising and implementation of steel and concrete structures as well as low rise and tall buldings and structures.
$15/hr
Project Estimation Designer
-Prepare (GA, Isometric, Plant Layout, As-Built) Drawing -Prepare Material RFQ, Take-off, BOQ -Prepare Piping Stress Analysis - Intermediate Operation SOftware Plant ( PDMS,Smartplant 3d,AutoCad 3D/2D... Read more
-Prepare (GA, Isometric, Plant Layout, As-Built) Drawing -Prepare Material RFQ, Take-off, BOQ -Prepare Piping Stress Analysis - Intermediate Operation SOftware Plant ( PDMS,Smartplant 3d,AutoCad 3D/2D, Cadworx,etc) Experience 6 years
$19/hr
Project Estimation Designer
Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more
Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!
Project Estimation Designer
$15/hr
Project Estimation Designer
I am a skilled Civil Engineer with over 5 years of professional experience in structural analysis, design, and estimation. My expertise spans across building construction projects, structural engineer... Read more
I am a skilled Civil Engineer with over 5 years of professional experience in structural analysis, design, and estimation. My expertise spans across building construction projects, structural engineering solutions, and advanced design techniques, specializing in both residential and commercial buildings. I hold a Bachelor's degree in Civil Engineering from Tribhuvan University and have worked on a variety of projects including Pre-Engineered Building (PEB) construction, hybrid buildings, pharmaceutical facilities, agro resorts, and institutional structures. My professional experience includes roles as a Site Engineer, Estimator, and Design Engineer, where I have been responsible for delivering high-quality structural designs, precise project estimations, and project management. **Key Expertise:** - Structural design & analysis (ETABS, SAFE, IDEA Statica) - Building construction & PEB systems - Project estimation & costing - AutoCAD drafting & 3D rendering - Compliance with Nepal Building Code, Indian Standard Code and other building codes **Why Work with Me?** -Tailored Solutions: I approach each project with a customized strategy, ensuring the design meets both structural integrity and your unique vision. - Attention to Detail: From estimation to structural design, I ensure precision and accuracy, saving you time and reducing costly errors. - Timely Delivery: I understand the importance of deadlines and strive to meet project milestones efficiently without compromising quality. - Clear Communication: You’ll always be informed of progress and updates throughout the project, ensuring we stay aligned with your goals. - Commitment to Quality: I use cutting-edge tools like AutoCAD, Civil 3D, CSI ETABS, and IDEA Statica, combined with in-depth knowledge of building codes, to provide solutions that are not only compliant but optimized for safety and durability. Let’s work together to create solid, sustainable, and efficient structures that exceed expectations!
Architect - Project Manager with over 18yrs. of experience in complex and multi cultural environment across the Gulf and India Worked with reputed Architectural firms, Contractors, Retailers and Deve... Read more
Architect - Project Manager with over 18yrs. of experience in complex and multi cultural environment across the Gulf and India Worked with reputed Architectural firms, Contractors, Retailers and Developers. Travelled across multiple countries for the development, implementation and management of Retail Fit out projects for multinational retail brands Specialties: Architectural & Interior Design, Retail stores' fit out project management
$65/hr
Project Estimation Designer
* AUTOCAD 3D Modelling, BIM 360, REVIT MEP fabrication, TRIMBLE Sysque, and Estimation. * Bluebeam, Bluebeam Studio. * Trane Trace 700 * Carrier HAP * Project Managing * HVAC, Mech. Piping and Plum... Read more
* AUTOCAD 3D Modelling, BIM 360, REVIT MEP fabrication, TRIMBLE Sysque, and Estimation. * Bluebeam, Bluebeam Studio. * Trane Trace 700 * Carrier HAP * Project Managing * HVAC, Mech. Piping and Plumbing Design * Leadership and Mentorship * Mechanical Engineering. * Staff Training & Development. *NAVISWORKS for 3D coordination. * EVOLVE. * Autodesk ACC * FIM: MAINSAVER, ARCHIBUS, MCLAREN. * PROCORE.
$19/hr
Project Estimation Designer
Electrical technologist with a background in commercial and industrial electrical installations with 10+ years of design and estimation experience in power and renewable energy sector including in dep... Read more
Electrical technologist with a background in commercial and industrial electrical installations with 10+ years of design and estimation experience in power and renewable energy sector including in depth knowledge of preparation of conceptual and detailed estimation and design drawings of power plant, electrical distribution system and plant
$1/hr
Project Estimation Designer
Hey, i am good in architectural planing and interior design and also doing a estimation of residential building. i love to work with you and i promise to finish any project in a time period. give me... Read more
Hey, i am good in architectural planing and interior design and also doing a estimation of residential building. i love to work with you and i promise to finish any project in a time period. give me a opportunity to work with you. thank you.
$60/hr
Project Estimation Designer
Experienced Construction Professional with a demonstrated history of working in the construction industry. Skilled in AutoCAD, Revit, Budgeting, Contracts, Project Estimation, and Project Scheduling.... Read more
Experienced Construction Professional with a demonstrated history of working in the construction industry. Skilled in AutoCAD, Revit, Budgeting, Contracts, Project Estimation, and Project Scheduling. Strong program and project management professional with a Construction Engineering Technology diploma focused in Construction Management from Northern Alberta Institute of Technology.
$10/hr
Project Estimation Designer
Over 18+ years in Engineering outsourcing, managing multiple projects in Automotive, Aerospace and Heavy Machinery industries. Demonstrated ability to work at all levels; developed strong customer rel... Read more
Over 18+ years in Engineering outsourcing, managing multiple projects in Automotive, Aerospace and Heavy Machinery industries. Demonstrated ability to work at all levels; developed strong customer relationship. Assembled talented teams whose diversity fostered unconventional thinking and creative solutions to complex challenges. Working on engineering services assignments with great exposure to many areas of product design, Digitization of Drawing and many more. Specialties: Business development and consulting, Business strategy, planning, positioning and implementation including market research & competitive analysis, Program and Project Management and Execution, Resource planning and resource management, Project estimation and scheduling, Quality management and documentation, Customer co-ordination, Team management, business proposals, Due Diligence, Client Relationship, Outsourcing, Global Delivery Model. International Exposure: Worked at UK (7 Months) and Singapore (Visited Multiple times to Singapore for Project Assignment and Business Meeting. Total Duration 11 Months). Worked with the clients from USA, Europe, UK, Singapore, Japan, India.
$25/hr
Project Estimation Designer
Mechanical Engineer Can do 3D designs on auto cad Can do estimates Can do project management Can do gantt chart Read more
Mechanical Engineer Can do 3D designs on auto cad Can do estimates Can do project management Can do gantt chart
$13/hr
Project Estimation Designer
I am a PMP Certified Planner having more than 7 years of experience in project planning, scheduling, monitoring and control, extension of time, change control system, forensic delay analysis, cost... Read more
I am a PMP Certified Planner having more than 7 years of experience in project planning, scheduling, monitoring and control, extension of time, change control system, forensic delay analysis, cost claims, variations mitigation plans, resource management and dispute resolution gained on a variety of construction, civil engineering projects like buildings, roads / infrastructures and hydropower as well while working in Qatar and Pakistan
$100/hr
Project Estimation Designer
Architectural & Engineering Services of Pakistan (AESP) was founded by Engr. Raja Tariq Nazir in December 2015 after his retirement from National Engineering Services of Pakistan (NESPAK) as General M... Read more
Architectural & Engineering Services of Pakistan (AESP) was founded by Engr. Raja Tariq Nazir in December 2015 after his retirement from National Engineering Services of Pakistan (NESPAK) as General Manager/Head Structural Engineering Division. Structural Engineering Division is the backbone of NESPAK working in diversified field of activities like Hydropower plants, Dams, Barrages, Irrigation System, Thermal Power Plants, Nuclear Power Plants, Bridges, Flyovers, Metro bus & train, Electricity & Water Transmission Lines, Substations, Harbors, Tunnels, Rehabilitation & Conservation of Structures, Airports and Railways etc. Architectural & Engineering Services of Pakistan (AESP) is a consulting organization providing professional services in the field of architecture and engineering. The team has a rich experience of providing consultancy services in design, supervision and project management of various projects. AESP has a full range of Architecture, Civil, Electrical, Mechanical, Interior Design and Computer Engineering with experts in diverse fields of Power Plants, Substations, Structural Engineering, Transportation Engineering, Construction Management, Project Management and Environmental Engineering
Chris Jackson is an experienced Business Development Manager with a demonstrated history of working in the construction industry. He is currently employed by Best Access Doors, an access door supplier... Read more
Chris Jackson is an experienced Business Development Manager with a demonstrated history of working in the construction industry. He is currently employed by Best Access Doors, an access door supplier in the US and Canada, and has been working for the company for more than 12 years now. His area of expertise is on Negotiation, Roofers, Sales, Project Estimation, and Facility Management (FM).
$30/hr
Project Estimation Designer
Having overall 18 years of Professional Experience into New Product Development , Product Costing , Various Manufacturing Process , Project Estimation, Planning, Scheduling & Project Execution for Ge... Read more
Having overall 18 years of Professional Experience into New Product Development , Product Costing , Various Manufacturing Process , Project Estimation, Planning, Scheduling & Project Execution for Gems & Jewelry, Life Style Products, Home Décor & Architectural Products, Mechanical & Industrial Products with technical skill of 3D CAD-CAM softwares (Rhinoceros 7 with Sub D, Matrix 9 with Clayoo, Solidworks 2020, Z-Brush 2020) and Autocad 2018, 3D Printing Process (Projet 2500W-3D System m/c ) & CNC Programming for 3Axis Milling m/c ( G-Code generation by RhinoCAM & ArtCAM ).
$50/hr
Project Estimation Designer
Erik Strommen is a dedicated freelance AutoCAD drafter with a specialization in Civil Engineering. With a strong background in land survey drafting and technical equipment drafting, he brings precisio... Read more
Erik Strommen is a dedicated freelance AutoCAD drafter with a specialization in Civil Engineering. With a strong background in land survey drafting and technical equipment drafting, he brings precision, attention to detail, and timeliness to each project. He has extensive experience working in land survey drawings, topographic maps, and boundary surveys. His work ensures that all measurements and data are meticulously documented, providing a solid foundation for construction, development, and legal transactions. His expertise also extends to drafting technical equipment plans. He excels in producing detailed schematics and drawings for a variety of equipment, ensuring that each design is both functional and compliant with industry standards.
Project Estimation Designer
A highly talented and accomplished Construction Management professional with skills and experience as 2D/3D CAD Designer - PROJECT MANAGER – SUPERINTENDENT - ESTIMATOR Read more
A highly talented and accomplished Construction Management professional with skills and experience as 2D/3D CAD Designer - PROJECT MANAGER – SUPERINTENDENT - ESTIMATOR
$45/hr
Project Estimation Designer
Experienced Project Manager with solid knowledge of the practical application of architecture and construction. Proven ability to manage multiple projects and meet critical deadlines. Read more
Experienced Project Manager with solid knowledge of the practical application of architecture and construction. Proven ability to manage multiple projects and meet critical deadlines.
$30/hr
Project Estimation Designer
Diligent Graduate Mechanical Design & Project Engineer with experience in Design Layout Drawings, Engineering Calculations, Sizing Mechanical Services Equipment, Material Estimation, Project Planning... Read more
Diligent Graduate Mechanical Design & Project Engineer with experience in Design Layout Drawings, Engineering Calculations, Sizing Mechanical Services Equipment, Material Estimation, Project Planning and Management of commercial, residential and industrial projects.
$8/hr
Project Estimation Designer
Experience Detail drawing, Cost estimation with over 7 year in the construction industry, specializing in cost estimation, budgeting, and structural analysis. skilled in using industry-standard softwa... Read more
Experience Detail drawing, Cost estimation with over 7 year in the construction industry, specializing in cost estimation, budgeting, and structural analysis. skilled in using industry-standard software, including AutoCAD, Revit, and primavera, to deliver precise, cost-effective project solutions. Proven track recorded in managing project budgets, preparing accurate cost reports, and ensuring structural integrity through innovative design.
$75/hr
Project Estimation Designer
I have over 17 years of start to finish project management experience and am looking for opportunities to freelance and network within my specialties of elevated post tension and structural steel. Read more
I have over 17 years of start to finish project management experience and am looking for opportunities to freelance and network within my specialties of elevated post tension and structural steel.
over 18 years of experience in Project and Operations Management in Power Utility and telecom sectors and served with fortune 500 companies like ABB and NEC Japan in leading customer facing roles. E... Read more
over 18 years of experience in Project and Operations Management in Power Utility and telecom sectors and served with fortune 500 companies like ABB and NEC Japan in leading customer facing roles. Expert in Project Management of the Substation related projects throughout the complete project life cycle as a Senior Project Manager, and looked after the Pre-sales and post-sales aspect of the projects. Expert in substation SCADA, Telecom, Protection, SAS and transmission design and estimation,
$25/hr
Project Estimation Designer
An AutoCAD Professional with a highly credible track record of 15 years primarily in the field of digitization of drawings involving thorough requirement analysis, effort estimation based on available... Read more
An AutoCAD Professional with a highly credible track record of 15 years primarily in the field of digitization of drawings involving thorough requirement analysis, effort estimation based on available resources, controlled project execution and subsequent support and maintenance of the project. Domain wise my experience covers drawings related to all fields of Engineering such as Civil, Structural, Mechanical, Piping etc.
$8/hr
Project Estimation Designer
I am providing all the services of Civil Engineering related works. * Civil Structural Designing & Analysis * Civil Drawings * Civil Estimation & Bill of Quantities (BOQ). * Architectural & Structu... Read more
I am providing all the services of Civil Engineering related works. * Civil Structural Designing & Analysis * Civil Drawings * Civil Estimation & Bill of Quantities (BOQ). * Architectural & Structural Drafting. * Project Quantity & Cost estimation * House plans for the approval of the concerned authority. My aim is to deliver the best quality services to the customers. My price is only the satisfaction of the customer.
$31/hr
Project Estimation Designer
Hello, my name is Abdellatif Arkkou, and I am a skilled building designer and construction estimator. With expertise in architectural design, project management, and cost estimation, I ensure every pr... Read more
Hello, my name is Abdellatif Arkkou, and I am a skilled building designer and construction estimator. With expertise in architectural design, project management, and cost estimation, I ensure every project is both beautiful and financially viable. I specialize in creating innovative, sustainable designs that meet client needs while adhering to all building codes and regulations. Proficient in CAD and BIM software, I provide detailed plans and 3D models for clear project visualization. Let's work together to bring your vision to life with precision and creativity.
$12/hr
Project Estimation Designer
I am a skilled civil engineer with a strong foundation in construction design, project management, and Building Information Modeling (BIM). Having successfully completed the Autodesk BIM course, I bri... Read more
I am a skilled civil engineer with a strong foundation in construction design, project management, and Building Information Modeling (BIM). Having successfully completed the Autodesk BIM course, I bring a detailed understanding of 3D modeling, coordination, and project visualization to streamline construction workflows. My expertise includes: Building Information Modeling (BIM): Proficient in creating and managing accurate 3D models using Autodesk tools like Revit, Navisworks, and Civil 3D. Design and Drafting: Developing detailed architectural, structural, and MEP designs. Clash Detection & Coordination: Identifying and resolving design conflicts to optimize project efficiency. Project Management: Ensuring timely delivery of high-quality outputs aligned with project requirements. Data Integration: Leveraging BIM to support cost estimation, scheduling, and lifecycle analysis. I am passionate about delivering innovative solutions that improve project quality and reduce costs. Whether you need a detailed BIM model, clash-free designs, or efficient project coordination, I am here to exceed your expectations.
$38/hr
Project Estimation Designer
Last updated: Jan 26, 2025
