Remote
Work location
Plastic Parts designer for greywater recycling system Ended
About the job
We are developing a hand wash unit that recycles grey water for train applications, that works on its own without the need for any continuous water source for a substantial period of time. The unit has two tanks treatment tank that contains a membrane, and a water level sensor. The membrane needs to be continuously aerated from the bottom for the growth of useful bacteria. The bacteria are useful for consuming waste and conversion into different compounds. The other tank is a clean water tank, which provides clean water for hand wash. this water gets clean water from treatment after it has been treated. The clean water also includes the water level sensor, redox sensor, and electro-oxidation unit. Both tank needs to be of plastic material like PP or HDPE.
The treatment tank volume is around 27L and clean water is around 40L. We would prefer if you work on SolidWorks for the ease of data transfer.
We require you to design the two plastic tanks, with the necessary sensors and other elements. As this product is new development so I can provide a more detailed overview but before that, I would request you sign an NDA
The design would be used for making prototypes for the rail application and eventually a matured product for mass production. We are expecting a large volume of production for this product.
I am afraid at this stage I am not allowed to share any drawings or sketches but I provide you with product with a similar function but for different application. applic... read more
The treatment tank volume is around 27L and clean water is around 40L. We would prefer if you work on SolidWorks for the ease of data transfer.
We require you to design the two plastic tanks, with the necessary sensors and other elements. As this product is new development so I can provide a more detailed overview but before that, I would request you sign an NDA
The design would be used for making prototypes for the rail application and eventually a matured product for mass production. We are expecting a large volume of production for this product.
I am afraid at this stage I am not allowed to share any drawings or sketches but I provide you with product with a similar function but for different application. applic... read more
We are developing a hand wash unit that recycles grey water for train applications, that works on its own without the need for any continuous water source for a substantial period of time. The unit has two tanks treatment tank that contains a membrane, and a water level sensor. The membrane needs to be continuously aerated from the bottom for the growth of useful bacteria. The bacteria are useful for consuming waste and conversion into different compounds. The other tank is a clean water tank, which provides clean water for hand wash. this water gets clean water from treatment after it has been treated. The clean water also includes the water level sensor, redox sensor, and electro-oxidation unit. Both tank needs to be of plastic material like PP or HDPE.
The treatment tank volume is around 27L and clean water is around 40L. We would prefer if you work on SolidWorks for the ease of data transfer.
We require you to design the two plastic tanks, with the necessary sensors and other elements. As this product is new development so I can provide a more detailed overview but before that, I would request you sign an NDA
The design would be used for making prototypes for the rail application and eventually a matured product for mass production. We are expecting a large volume of production for this product.
I am afraid at this stage I am not allowed to share any drawings or sketches but I provide you with product with a similar function but for different application. applications.
Its a one-time project but may turn into long-term hire if the product matures for mass production. The deliverables would be the detailed CAD models in SolidWorks and complete 2D Drawings for the product.
See also attached a product with a similar function but for a different application. read less
The treatment tank volume is around 27L and clean water is around 40L. We would prefer if you work on SolidWorks for the ease of data transfer.
We require you to design the two plastic tanks, with the necessary sensors and other elements. As this product is new development so I can provide a more detailed overview but before that, I would request you sign an NDA
The design would be used for making prototypes for the rail application and eventually a matured product for mass production. We are expecting a large volume of production for this product.
I am afraid at this stage I am not allowed to share any drawings or sketches but I provide you with product with a similar function but for different application. applications.
Its a one-time project but may turn into long-term hire if the product matures for mass production. The deliverables would be the detailed CAD models in SolidWorks and complete 2D Drawings for the product.
See also attached a product with a similar function but for a different application. read less
We are developing a hand wash unit that recycles grey water for train applications, that works on its own without the need for any continuous water source for a substantial period of time. The unit has two tanks treatment tank that contains a membrane, and a water level sensor. The membrane needs to be continuously aerated from the bottom for the growth of useful bacteria. The bacteria are useful...
read more
We are developing a hand wash unit that recycles grey water for train applications, that works on its own without the need for any continuous water source for a substantial period of time. The unit has two tanks treatment tank that contains a membrane, and a water level sensor. The membrane needs to be continuously aerated from the bottom for the growth of useful bacteria. The bacteria are useful for consuming waste and conversion into different compounds. The other tank is a clean water tank, which provides clean water for hand wash. this water gets clean water from treatment after it has been treated. The clean water also includes the water level sensor, redox sensor, and electro-oxidation unit. Both tank needs to be of plastic material like PP or HDPE.
The treatment tank volume is around 27L and clean water is around 40L. We would prefer if you work on SolidWorks for the ease of data transfer.
We require you to design the two plastic tanks, with the necessary sensors and other elements. As this product is new development so I can provide a more detailed overview but before that, I would request you sign an NDA
The design would be used for making prototypes for the rail application and eventually a matured product for mass production. We are expecting a large volume of production for this product.
I am afraid at this stage I am not allowed to share any drawings or sketches but I provide you with product with a similar function but for different application. applications.
Its a one-time project but may turn into long-term hire if the product matures for mass production. The deliverables would be the detailed CAD models in SolidWorks and complete 2D Drawings for the product.
See also attached a product with a similar function but for a different application. read less
The treatment tank volume is around 27L and clean water is around 40L. We would prefer if you work on SolidWorks for the ease of data transfer.
We require you to design the two plastic tanks, with the necessary sensors and other elements. As this product is new development so I can provide a more detailed overview but before that, I would request you sign an NDA
The design would be used for making prototypes for the rail application and eventually a matured product for mass production. We are expecting a large volume of production for this product.
I am afraid at this stage I am not allowed to share any drawings or sketches but I provide you with product with a similar function but for different application. applications.
Its a one-time project but may turn into long-term hire if the product matures for mass production. The deliverables would be the detailed CAD models in SolidWorks and complete 2D Drawings for the product.
See also attached a product with a similar function but for a different application. read less
Things to know
Expert
Skill Level
Open budget
Hourly
Part-time
Job type
3-6 months
Job duration
Areas of expertise
2D & 3D Design
2D & 3D Modeling
2D CAD Drafting
SolidWorks
+1 more
Job categories
3D Design Services
3D Modeling
About the client
Payment not ready
Bahrain (07:22 am)
Posted
Active
Job activity
32 Applicants
0 interviews in progress
8 unanswered invites
Similar jobs
3d Halloween Mask
Remote - Posted
The goal is to copy a 2D Character and make a mask of the character in 3D. The mask must be printable with a 3D printer.
2D to 3D Modeling
3D Modeling
3D Character Modeling Services
3D Art Design Services
View job
CAD Redesign & Modification of Vacuum Nozzle in Autodesk Inventor
Remote - Posted
Project Overview:
We have an existing STL of a vacuum nozzle that must be fully rebuilt in Autodesk Inventor, with a clean feature tree, detailed 2D drawings, and several spe...
3D Modeling
3D Design Services
CAD Drafting Services
CAD Redrafting and Conversion Services
View job
3 Phase Product Project: Scan /Reverse Engineering Small Product, build and modify CADs and 3D print prototype w/ iteration
Los Angeles, United States - Posted
PHASE 1
We need help reverse engineering our 'long' press-on nail / fake nail product in 3 shapes (almond, square, oval) , which comes in sets of 15, to ~0.01mm precision (pl...
3D Modeling
Reverse Engineering
3D Scan to CAD Service
3D Printing Design
Prototype Design Services
View job
Shoes designer
Remote - Posted
I need Unique 3D sneaker designs for my shoes brand
3D Design Services
View job
3d modeling, prototyping, product design
Remote - Posted
I am a civil engineer and have been prototyping a portable hammock swing. I would like a mechanical engineer who has experience in prototype design, 3d modeling, etc.
3D Modeling
3D Product Rendering and Design
Mechanical 3D Rendering
Product Engineering Services
Prototype Design Engineering
View job
3d car modeling for 3d printing
Remote - Posted
Hi, we are a company that builds miniatures in bulk, we need a professional to design cars and other vehicles in 3D in Solidworks in 1:43 scale. It needs to be a solid (not a...
2D to 3D Modeling
3D Printing Design
3D Product Modeling
3D Modeling
View job
