Remote
Work location
Fastener Reverse Engineer and Spec Sheet Design Anyone
Client active
About the job
I am looking for someone with fastener knowledge in metals and spec/technical sheet creation for manufacturing with the ability to provide necessary files/drawings to send to global manufacturers for quotes.
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these should be highlighted on the drawing. Always better to try and manufacture within the customers requirements so that nothing is made out of spec.
-State how the manufacturer will measure the parts. Are they going to do SPC on them. This gives a good record of dimensions and also allows for Control Limits and Specification Limits with the abilitity to view the charts/data.
-Unsure if this product is heat treated. If so, we need wording onspecification for this and how are they confirming batch hardness levels.
-Verify if the cone is plated. Again, important to have an agreed specification for adhesion of plating and thickness. This should be covered in the ASTM Standard. Also, important to know is the material/plating process susceptible to hydrogen embrittlement.
-Are they carrying out camera inspection on the final parts and if necessary.
-State typical agreed acceptable and unacceptable defects
-Verify all the ASTM standards that cover the process involved.
-Be able to work with testing agencies and manufacturer to achieve proper ratings. These should already be pa... read more
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these should be highlighted on the drawing. Always better to try and manufacture within the customers requirements so that nothing is made out of spec.
-State how the manufacturer will measure the parts. Are they going to do SPC on them. This gives a good record of dimensions and also allows for Control Limits and Specification Limits with the abilitity to view the charts/data.
-Unsure if this product is heat treated. If so, we need wording onspecification for this and how are they confirming batch hardness levels.
-Verify if the cone is plated. Again, important to have an agreed specification for adhesion of plating and thickness. This should be covered in the ASTM Standard. Also, important to know is the material/plating process susceptible to hydrogen embrittlement.
-Are they carrying out camera inspection on the final parts and if necessary.
-State typical agreed acceptable and unacceptable defects
-Verify all the ASTM standards that cover the process involved.
-Be able to work with testing agencies and manufacturer to achieve proper ratings. These should already be pa... read more
I am looking for someone with fastener knowledge in metals and spec/technical sheet creation for manufacturing with the ability to provide necessary files/drawings to send to global manufacturers for quotes.
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these should be highlighted on the drawing. Always better to try and manufacture within the customers requirements so that nothing is made out of spec.
-State how the manufacturer will measure the parts. Are they going to do SPC on them. This gives a good record of dimensions and also allows for Control Limits and Specification Limits with the abilitity to view the charts/data.
-Unsure if this product is heat treated. If so, we need wording onspecification for this and how are they confirming batch hardness levels.
-Verify if the cone is plated. Again, important to have an agreed specification for adhesion of plating and thickness. This should be covered in the ASTM Standard. Also, important to know is the material/plating process susceptible to hydrogen embrittlement.
-Are they carrying out camera inspection on the final parts and if necessary.
-State typical agreed acceptable and unacceptable defects
-Verify all the ASTM standards that cover the process involved.
-Be able to work with testing agencies and manufacturer to achieve proper ratings. These should already be part of the manufacturer's resposibility so it's mainly some communication here.
Should this job stay on budget and in good time, we will continue to work with whomever can deliver and communicate as there are more items already waiting to be developed. We will send samples to help create the package.
Looking forward to developing a relationship with you and growing our businesses together! read less
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these should be highlighted on the drawing. Always better to try and manufacture within the customers requirements so that nothing is made out of spec.
-State how the manufacturer will measure the parts. Are they going to do SPC on them. This gives a good record of dimensions and also allows for Control Limits and Specification Limits with the abilitity to view the charts/data.
-Unsure if this product is heat treated. If so, we need wording onspecification for this and how are they confirming batch hardness levels.
-Verify if the cone is plated. Again, important to have an agreed specification for adhesion of plating and thickness. This should be covered in the ASTM Standard. Also, important to know is the material/plating process susceptible to hydrogen embrittlement.
-Are they carrying out camera inspection on the final parts and if necessary.
-State typical agreed acceptable and unacceptable defects
-Verify all the ASTM standards that cover the process involved.
-Be able to work with testing agencies and manufacturer to achieve proper ratings. These should already be part of the manufacturer's resposibility so it's mainly some communication here.
Should this job stay on budget and in good time, we will continue to work with whomever can deliver and communicate as there are more items already waiting to be developed. We will send samples to help create the package.
Looking forward to developing a relationship with you and growing our businesses together! read less
I am looking for someone with fastener knowledge in metals and spec/technical sheet creation for manufacturing with the ability to provide necessary files/drawings to send to global manufacturers for quotes.
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these shou... read more
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these shou... read more
I am looking for someone with fastener knowledge in metals and spec/technical sheet creation for manufacturing with the ability to provide necessary files/drawings to send to global manufacturers for quotes.
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these should be highlighted on the drawing. Always better to try and manufacture within the customers requirements so that nothing is made out of spec.
-State how the manufacturer will measure the parts. Are they going to do SPC on them. This gives a good record of dimensions and also allows for Control Limits and Specification Limits with the abilitity to view the charts/data.
-Unsure if this product is heat treated. If so, we need wording onspecification for this and how are they confirming batch hardness levels.
-Verify if the cone is plated. Again, important to have an agreed specification for adhesion of plating and thickness. This should be covered in the ASTM Standard. Also, important to know is the material/plating process susceptible to hydrogen embrittlement.
-Are they carrying out camera inspection on the final parts and if necessary.
-State typical agreed acceptable and unacceptable defects
-Verify all the ASTM standards that cover the process involved.
-Be able to work with testing agencies and manufacturer to achieve proper ratings. These should already be part of the manufacturer's resposibility so it's mainly some communication here.
Should this job stay on budget and in good time, we will continue to work with whomever can deliver and communicate as there are more items already waiting to be developed. We will send samples to help create the package.
Looking forward to developing a relationship with you and growing our businesses together! read less
-Define Material specification. Zamac 3 Body with Zinc plated or Carbon Cone
-Make sure the drawing tolerances are correct particularly in relation to any critical dimensions, these should be highlighted on the drawing. Always better to try and manufacture within the customers requirements so that nothing is made out of spec.
-State how the manufacturer will measure the parts. Are they going to do SPC on them. This gives a good record of dimensions and also allows for Control Limits and Specification Limits with the abilitity to view the charts/data.
-Unsure if this product is heat treated. If so, we need wording onspecification for this and how are they confirming batch hardness levels.
-Verify if the cone is plated. Again, important to have an agreed specification for adhesion of plating and thickness. This should be covered in the ASTM Standard. Also, important to know is the material/plating process susceptible to hydrogen embrittlement.
-Are they carrying out camera inspection on the final parts and if necessary.
-State typical agreed acceptable and unacceptable defects
-Verify all the ASTM standards that cover the process involved.
-Be able to work with testing agencies and manufacturer to achieve proper ratings. These should already be part of the manufacturer's resposibility so it's mainly some communication here.
Should this job stay on budget and in good time, we will continue to work with whomever can deliver and communicate as there are more items already waiting to be developed. We will send samples to help create the package.
Looking forward to developing a relationship with you and growing our businesses together! read less
Things to know
Any
Skill Level
$10 - $75/hr
Hourly (USD)
Part-time
Job type
Under 1-month
Job duration
Areas of expertise
2D CAD Drawings
3D CAD Drawing
3D Metal Constructions
3D Modeling and Drawings
3D Mold Design
3D PDF Files
3D Part Modeling
+4 more
Job categories
Manufacturing Drawings
3D Modeling
Prototype Tooling
Mold and Die Design Services
+1 more
About the client
Payment ready
Posted
Active
Job activity
29 Applicants
1 interviews in progress
Similar jobs
CAD design needed for hoop earrings
Remote - Posted
Hello, I need a CAD design of 348 pink stones with 3 rows of micro stones, each 1.20-1.25 mm and the hoop earrings should be 38 mm round, again 3 rows as shown in the photos....
3D Modeling
CAD Drawing Services
CAD Design File Validation
Jewelry Design
Jewelry Design
FreeCAD 3D modeling expert- 3 months full time.
Bengaluru, India - Posted
I'm looking for a FreeCAD expert with at least 5+ years of verifiable experience.
-> Should be able to create 3D models from a catalogue of mechanical parts and furniture....
3D Modeling
3D Model in ptc creo or Autocad
Remote - Posted
Hello Umar
i need to copy a 3d model attached design.please review and share estimated price.
3D Design Services
3D Modeling
3D/Cad designer
Remote - Posted
Looking for someone to help draw or design a 3d drawing for an idea I have for a home product. Ill attach a vague drawing of what I'm looking to be done below.
3D Modeling
CAD Drawing Services
3D Design Services
need help in creating a design for miniature farm kit
Remote - Posted
I want to create a miniature farm kit for kids as a toy .the sides and bottom of the tray which holds soil and plants should be attachable and detachable , tight ,waterproof s...
Product Engineering Services
Custom Miniatures
Prototype Design Engineering
Toys & Games Design
3D Modeling
3D topographic model of the Earth
Remote - Posted
I want to get a 3d design of the Earth/Globe, showing the countries and mountains etc sitting proud of the sea etc, in a way which is a replica of the globe as it actually is....
3D Modeling
3D Scan to CAD Service