Hire Water Treatment Designers in India

I have over 12+ years of varied experience in Structural analysis and design, BIM in different construction sectors like Buildings, Water and Waste Water treatment plants, Pumping Stations,... Read more

I have over 12+ years of varied experience in Structural analysis and design, BIM in different construction sectors like Buildings, Water and Waste Water treatment plants, Pumping Stations, Tunnels, Tidal Barrier, Flood walls, Bridges, Metro Rail, and Earth Retaining Structures while working for projects based in UK, Middle East, USA, South Africa & India. Key Skills  Structural design of water and waste water projects  Structural design of water retaining structures, pumping stations, Thrust blocks  Structural analysis and design of Tidal barrier, Flood defence walls  Project management, Project co-ordination  Project effort estimation, Cost Estimation, Bidding preparation  Team management  Autodesk certified Revit Structure Professional  BIM management, BIM implementation, BIM process, BIM Training, BIM coordination  Software Training, Mentoring, core team building  Architectural and Structural general arrangement drawings, Civil drawings, Structural Steel detailing, connection detailing  RC detailing with BBS by manual or using CADS RC or similar software’s  Civil 3D modelling, Pipework modelling, Highway modelling  Preparation of Longitudinal sections, cross sections, cut & fill quantity calculation  3D modelling of structures using Revit, Tekla software’s  Clash detection, quantity estimation, 4D/5D modelling using Navisworks  Trained internal auditor, BMS, Audits, Standards preparation  Automation, Lisp programming, scripts, dot net programming  British, Europe, Indian, American, and South African Standards  Attended Revit Technology conference 2015 at Singapore  International work experience

' Give me your static parameters and I'll handle the Entropy' In simpler terms, I'll turn your imagination into reality. I am a full time Engineer and a part time Designer. The remaining... Read more

' Give me your static parameters and I'll handle the Entropy' In simpler terms, I'll turn your imagination into reality. I am a full time Engineer and a part time Designer. The remaining time I oscillate between both.Well, it has been 7 years and am still oscillating. In short, I do everything from and between prototyping to generating business out of it.

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in... Read more

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Material Selection & Load Calculation on Structural Beam. • Mechanical Engineer working on Basic (conceptual) and detailed engineering designs for sectors like power plant, process plant and waste water treatment plant. • Mechanical Design Engineer who have worked on different projects & handled a challenging technical development position on Precision Sheet Metal Enclosure Designing using Solid Works and AutoCAD.

Priya has been engaged in many facets of Architectural and engineering projects (Preconstruction/3D/BIM) for some Eleven years. Since 2008 she has been successfully managing all the projects for... Read more

Priya has been engaged in many facets of Architectural and engineering projects (Preconstruction/3D/BIM) for some Eleven years. Since 2008 she has been successfully managing all the projects for her clients in the AEC industry. She also has strong strategic sales, account and project management skills. Managing team for 1. www.Qecad.com – QeCAD • A team specialized in assisting clients in drafting, designing and 3D visualization of multidisciplinary projects for Architects/builders/Real estate people. Working on various Architectural projects like Residential, Commercial, Stores, Water Treatment Plants, etc • The services provided vary from Architectural drafting, Paper to CAD conversions, CAD to CAD conversions, Drawing upgrades, Redline changes, Architectural 3D Rendering, Product Modeling, Architectural GIS conversion. • Taking a load of all time-consuming tasks and works as a back-office so the client can focus more on design and can increase the work capacity. • Providing affordable drafting and 3-d rendering services to Developers, Builders, and Architects in US, Australia, New Zealand, UK, and many more countries.

Aniruddha is an inspiring leader with admirable qualities. He has over two decades of valuable experience in Project Management and Structural Engineering Solutions. Prior to his stint as director,... Read more

Aniruddha is an inspiring leader with admirable qualities. He has over two decades of valuable experience in Project Management and Structural Engineering Solutions. Prior to his stint as director, he created a significant impact at Tata Consulting Engineers and Gatecity. He has been instrumental in building and scaling the business. He has spearheaded residential, commercial, infrastructural and industrial projects across sectors. He has also worked on a number of projects in the USA focusing on condominiums, parking decks, stadiums, water treatment plants, schools and commercial spaces. Aniruddha holds an illustrious academic record, topping the post-graduation examinations of Pune University and securing second place in COEP at graduation. He is a registered professional recognized by Pune Municipal Corporation and Institution of Engineers, India. He also devotes his time as an active member of Institute of Engineers, Indian Society of Structural Engineers, Association of Consulting Civil Engineers, Rotary International and TiE among others.

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup... Read more

CAD Designer : I know Autodesk Inventor, Auto-CAD, Plant3D and Solid Works. I can do 3D Modelling, 3D CAD Layout, 2D fabrication detail drawings, point cloud to 3D CAD and P&ID/PFD redline markup updates. I did several projects for Water treatment plants, Flour mills, power plants. INTERIOR Designer : Space Planning, Color Schemes, Materials, Furniture and Decor ideas. I dis several designs for home interior, furniture and wood works on special needs.

PROJECT EXPERIENCE: 1) Project Involved: Secondary Water Treatment System Description: This is the one of the development project for secondary sewage treatment system. Activities... Read more

PROJECT EXPERIENCE: 1) Project Involved: Secondary Water Treatment System Description: This is the one of the development project for secondary sewage treatment system. Activities Involved: Have been responsible for Creating 3D parametric modeling, iParts and iAssembly, Structural design, Sheet Metal design, Piping design, Weldment assembly. Have been responsible for Creating Manufacturing drawings, Layout drawings and Sales drawings. Have been responsible for Creating Assembly drawings with weldment details as per customer standards. Have been responsible for Creating BOM and Stress Analysis. Have been responsible for Quality checking for drawing delivery Duration: 6 Months. Role: Design Engineer Platform tools and Technologies: Autodesk Inventor & Vault 2) Project Involved: High Performance Butterfly Valves Description: This is an development project for Butterfly Valves Activities Involved: Have been responsible for Creating 3D Modeling, Casting design. Have been responsible for Manufacturing drawings, Casting drawings, Have been responsible for Creating BOM and CFD Analysis. Have been responsible for Quality checking for drawing delivery Duration: 5 Months Role: Design Engineer Platform tools and Technologies: Autodesk Inventor & Vault 3) Project Involved: Thermal Processing Equipment Description: Designed new equipment such as Plasma Arc Melting (PAM), Electron Beam Melting (E-Beam), Plasma Arc Centrifugal Treatment System (PACT™), Vacuum Induction Melting (VIM), Vacuum Arc Remelting (VAR), Consumable Electrode Castingl, Rototrode™ & Powder Production Equipment according to various customer requirement. Duration: 6 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 4) Project Involved: Water treatment & sewage water treatment Description: I involved in the Product Design & Development from concept stage to Final Production for MicroDynamics microwave ultraviolet (UV) disinfection systems. Activities Involved: Responsible for creating sheet metal design and 3D Modeling Responsible for creating Manufacturing drawings and sheet metal drawings Responsible for creating new chain drive system design for wiper plate Responsible for creating BOM Responsible for Quality checking for drawing delivery Duration: 8 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 5) Project Involved: New Tier IV US Paver Design Description: Designed new parts models and weldment considering Value Engineering aspects. Upgraded sub-systems of Tier III machine to Tier IV and created manufacturing drawings. Created ECN’s, Items and updated Engineering documents in Autodesk PSP (Product Stream Professional 2009), CFD Analysis & Created BOM in ERP. Duration: 3 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 6) Project Involved: Re-design of 10 Feet Auger assembly Description: I involved redesign of 10 feet long Auger Assembly exclusively for US Paver. Designed new parts models and weldment considering Value Engineering aspects. I have created manufacturing drawings and assembly drawings. Created ECN’s, Items and updated Engineering documents in Autodesk PSP (Product Stream Professional 2009), CFD Analysis & Created BOM in ERP. Duration: 3 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 7) Description: High Energy Batteries are used in the Torpedoes Missile in navy submarines. This was manufactured first time in India after Russia. These Batteries initially gives more throttle for the missiles to achieve their target faster. This is a Air Launched Combat Torpedo At 1 ME. This project is done in reverse engineering process of Russian technology. Duration: 3 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 8) Project Involved: Description: 　　This is the one of the development project for Electro Chlorinators, which is used to purify the water. The whole Electro Chlorinator machine prototype machine was designed by me under the guidance of project Engineer. I involved all R&D activities, testing, modeling, detailing and assembly drawings. I also involved machine assembly, erection and commissioning. Duration: 1 Year Role: Design Engineer Platform Tools and Technology: AutoCAD, Autodesk Inventor.

Having civil engineering background with 6 years of experience in rebar detailing and working as a project leader for RCC projects. Worked for the US, Canada projects 1) Able to handle small as... Read more

Having civil engineering background with 6 years of experience in rebar detailing and working as a project leader for RCC projects. Worked for the US, Canada projects 1) Able to handle small as well as large RCC detailing project 2) Building, Bridges, Tunnel, Water treatment plants-any type of structure detailing 3) Education in Civil engineering 4) Quick study and project queries 5) Can estimate no of drawings for the project. 6) Checking of shop drawings 7) Communication with Engineer & Architecture where required 8) Simple & easy to understandable detailing

Asian Engineering Company was established in 2004 in Pune. Company is dealing with the Engineering of the different sections of Oil & gas, Chemical, Petrochemical, Fertilizer, Power and Process... Read more

Asian Engineering Company was established in 2004 in Pune. Company is dealing with the Engineering of the different sections of Oil & gas, Chemical, Petrochemical, Fertilizer, Power and Process plants. Company is dealing with following sections of engineering of plants: Company is having good experience of working in above mentioned categories. The objective of Asian Engineering is to provide cutting edge engineering solutions to Industry. Asian Engineering has good reputation amongst its clients due to its technical expertise and good resources in hand. CORE BUSINESS ACTIVITIES • Skid Mounted compressor Package Detailing • Skid Mounted Chilling plant detailing • Compressor Piping Layouts. • Civil Loading details. • Pressure vessel design (ASME Section VII Div I, CE, GEP, using PV ELite) • Atmospheric Storage tank design (API-650) • Piping Stress Analysis. • Structural detailing (pipe rack design & piping supports) • Piping GA for Critical and Non critical lines • Power Piping, Process piping and water treatment piping. • Isometrics with detailed drawings with Bill of material. • Boiler Pressure parts & Non Pressure part detailing, Riser & downcomer • Project Documentation. RESOURCES OFFICE FACILITIES: 1. AREA • 1000 Sq Ft 2. HARDWARE • COMPUTERS - 13 NOS. • PRINTERS 2 NOS. 3. SOFTWARE MECHANICAL ENGINEERING • PRESSURE VESSEL & TANK PV-ELITE. • STORAGE TANK DESIGN IN-HOUSE MADE PROGRAM IN EXCEL. • PIPING MODELING SP3D 2009 & PDMS-12. • P & I DIAGRAM SPPID & AUTOCAD-12 • STRUCTURAL & CIVIL DESIGN STAAD PRO. • 3D MODELING OF STRUCTURE TEKLA. 4. PIPING ENGINEERING • PIPING STRESS ANALYSIS CAESAR-II 5.1 5. PROJECT MANAGEMENT • MICROSOFT PROJECT 6. DRAFTING • MANUFACTURING DETAILED DRAWINGS AUTOCAD LT 12. 7. OFFICE AID • MICROSOFT OFFICE 8. COMMUNICATION • TELEPHONES / FAX / E-MAIL MANPOWER DESIGN ENGINEERS PIPING ENGINEERS DRAUGHTSMAN ADMINISTRATION OUR PRESTIGOUS CLIENTS • Thyssen-krupp Industries • Thermax Limited • Praj Industries Limited • Forbes & Company Limited Mumbai. • Nath Chemical Limited Vapi • ChandanTech Solution Pune • L & T Vadodara • Prothious engineering services • Meru Industries Bhosari. WORK PROFILE 1. Piping-Critical Non Critical: Asian Engineering have done piping design of Chemical plant and boiler piping which starts from P & ID and includes Layouts, Orientations, Piping GA, Piping Isometrics, Pipe Rack Drawings, Piping Model using 3D tools like PDMS/ Propipe, Line Lists, valve lists, Material Take offs, Interconnecting drawings, foundation drawings, CLD, Pipe support drawings. 2. Stress analysis: We have expertise in Stress Analysis using CAESAR-II 5.1 as a tool. We have references of completed projects for Stress Analysis for Boiler Steam & Turbine Piping. 3. Power Piping: We have done Boiler piping for various projects of Thermax, Praj Industries Ltd and Forbes & Company Limited. We are having experience in steam piping including PRDS Control stations, Condenser piping of Boiler etc. 4. Pressure Vessel Design and Design of Storage tanks: Asian Engineering does have expertises for Pressure vessel design as per ASME VII div I, Div-II and CE marking requirement. We have done designing of pressure vessel using PV Elite software as well. We have experience of designing Atmospheric tanks as per API-650. 5. Structural Design: Asian Engineering has completed number of projects for structural design and detailing. 6. Detail Engineering and Process Documentation: As per above experience and available expertise we have capability to do the detail engineering of the Compressor Package, Chemical and Fertilizer, Distillery plants, Boilers plants and others We have prepared good level of documentation for these projects. This documentation done based on specific requirement from clients. This is the reason why Asian Engineering can be a preferred Engineering Partner.

Design and drafting experience in Water and wastewater treatment plant Utilites network, pipeline, Potable water network, Sanitary sewear network, Storm water net work, Irrigation network, Fire... Read more

Design and drafting experience in Water and wastewater treatment plant Utilites network, pipeline, Potable water network, Sanitary sewear network, Storm water net work, Irrigation network, Fire fighting network, Stress Analysis, Pressure vessel ‘U’, Process Design and Detail engineering of water, STP, WTP, MBR and Desalination plant using ASME, API, AWWA, NFPA. Codes and standards.

Hi i am babu, i have experience 8 year in drafting with design piping & equipment design and sizing for water treatment plant like( STP, ETP & WTP ) and swimming pool design. Read more

Hi i am babu, i have experience 8 year in drafting with design piping & equipment design and sizing for water treatment plant like( STP, ETP & WTP ) and swimming pool design.

B.E- EEE WITH 16.5 YEARS EXPERIENCE IN PROJECT MANAGEMENT, ELECTRICAL SCHEMATICS, CONTROL PANEL DESIGN, PLC PROGRAMMING, HMI SCREEN DEVELOPMENT FOR SPECIAL PURPOSE MACHINES, INDUSTRIAL AUTOMATION,... Read more

B.E- EEE WITH 16.5 YEARS EXPERIENCE IN PROJECT MANAGEMENT, ELECTRICAL SCHEMATICS, CONTROL PANEL DESIGN, PLC PROGRAMMING, HMI SCREEN DEVELOPMENT FOR SPECIAL PURPOSE MACHINES, INDUSTRIAL AUTOMATION, WATER TREATMENT PLANT, OIL & GAS, ENERGY & UTILITIES

Worked for EPC companies on Different LSTK Project Drawings for Petrochemicals, Refineries, chemical and Industrial Plants. Involved in basic and detail designing activities of EPCM projects.... Read more

Worked for EPC companies on Different LSTK Project Drawings for Petrochemicals, Refineries, chemical and Industrial Plants. Involved in basic and detail designing activities of EPCM projects. Handled Turnkey Projects for Distillery, Brewery, Sugar, Ethanol, Bio-ethanol & Bio-Diesels Plants, Evapo- ration Systems, Effluent Treatment Plant & Water Treatment Plants. Involved in Packaging industry projects for food and non-food Packaging. Worked on Different heating and cooling projects, Furnaces, Steel Structures. Construction, detailing of Static and Process Equipment. Generation of various General Assembly drawings, Equipment Layout, Equipment Model and Equipment Drafting, Fabrication OR detail drawings, Pipe support modeling, Nozzle orientations of Equipment’s, Routing of pipe lines, Pipe support drawings, Plot Plans, P &ID’s, Schematic diagrams etc. Assists in the Generation of “as built” drawings. Generation of Bill of Materials, weight calculations, revisions and engineering change notes. Checking Drawings and Bill of Materials.

“Results-driven Mechanical Design Engineer with 10 years of experience in designing and developing mechanical systems for various industries. Proficient in CAD software, project management, and... Read more

“Results-driven Mechanical Design Engineer with 10 years of experience in designing and developing mechanical systems for various industries. Proficient in CAD software, project management, and product lifecycle management. Seeking the position of Mechanical Design Engineer at Engineering to utilize my expertise in creating efficient and innovative designs that meet client requirements and drive project success.” PROFILE SUMMARY • Seasoned and Solutions-Focused Professional with the career advancements of 9 years in mechanical design engineering, I specialize in creating, prototyping, testing, and manufacturing equipment for various industries, such as water and wastewater treatment, pipe and tube bending, and sheet metal products. • Remarkable background in core competencies include using advanced CAD software such as Inventor and Solidworks, AutoCAD, SP3D, applying engineering analysis methods such as CFD, FEA, and thermodynamics, and developing design concepts to finalize the design and get approval from clients. I also have expertise in 3D printing, sheet metal and plastic fabrication, material and process selection, and project management. • Leveraged prowess and perspectives in driving the development of technical solutions to deliver outstanding scalability & manageability and translate business needs into technical necessities. Skilled in implementing mechanical engineering principles to design, develop, maintain, test, and evaluate mechanical product. • Outstanding excellence in new CAD functions from scratch with technical leadership guided by vision and mission values. • Remarkable proficiency in aligning the business goals with technology solutions to drive process improvements, competitive advantage, and bottom-line gains. CORE COMPETENCIES • Strong Math’s & IT Skill’s • Communication skills • Material selection and sourcing • Geometric dimensioning • Finite element analysis (FEA) and tolerancing (GD&T) • Technical and domain proficiency • Piping design engineering (SP3D) • Computer-aided design (CAD) • Knowledge of materials • Mechanical design and analysis and manufacturing processes • Project management • Problem solving • Design for manufacturing (DFM) • Design for assembly (DFA) • Engineering documentation • Cost reduction & optimization • Bill of materials (BOM) • Design validation and testing • Rapid prototyping and 3D printing FUNCTIONAL SKILLS • My background in manufacturing design of large assemblies encompasses a wide range of components, including air pollution control systems, heat transfer equipment, vessels, transformers, tubes & coils, skids, and water tanks. Additionally, I have experience with Indian Railways switchgear electrical panels and enclosures. • Proficient in managing the Production Department with extensive expertise in operating various machines including Laser Cutting Machine, Water Jet Cutting Machine, CNC Bending Machine, and CNC Machine. Additionally, skilled in generating .DXF files for production purposes. • Knowledge of international standards (ANSI, ASME, ISO 9001). • Experienced in utilizing Design for Manufacturability and Design for Assembly techniques to enhance product manufacturability and assembly efficiency. • Proficient in revising and/or generating product documentation, including CAD files and BOMs, as an integral part of Product workflows. • A comprehensive understanding of various tool designs is essential to meet specific design requirements, such as Jig's and Fixture's, Die Design, Sheet forming Die's, and Molding Die's. • Proficient in 3D modeling of piping and equipment, as well as the creation of piping isometrics, GA drawings, pipe support drawings, and piping BOQ (MTO). • Proficiency in interpreting and comprehending P&IDs, along with a strong grasp of equipment data sheets and vendor drawings, are essential skills. Additionally, a solid understanding of piping layout and routing fundamentals is crucial in ensuring efficient and effective design and operation. • A comprehensive understanding of various tool designs is essential to meet specific design requirements, such as Jig's and Fixture's, Die Design, Sheet forming Die's, and Molding Die's. COMPUTER (IT) PROFICIENCY • 3D CAD Software’s i.e., Solidworks, Autodesk Inventor, AutoCAD, Autodesk 3ds Max • Piping Design 3D modelling Software’s i.e., MicroStation, Smart Plant 3D (SP3D), Navisworks, AutoCAD Plant 3D • Microsoft Office i.e., Word, Excel, PowerPoint, Outlook • Graphics Design (DTP) Software’s i.e., Corel Draw, Adobe Photoshop, PageMaker, Illustrator, InDesign, Blender • Capable of effectively diagnosing and repairing computer hardware and software. • Programming Language & Software’s i.e., C. C++, Python, MATLAB

I have been working in P&ID development since 2006. Expertise in developing P&IDs from PFD using ACAD, Intergraph smartplant and MIcrostation, Worked in OIL and GAS plants, Pharma plants, Chemical... Read more

I have been working in P&ID development since 2006. Expertise in developing P&IDs from PFD using ACAD, Intergraph smartplant and MIcrostation, Worked in OIL and GAS plants, Pharma plants, Chemical plants and waste water treatment. Individually handled FEED and EPC projects as a Lead designer. Now working as a project engineer in a EPC project of a Chemical plant in Germany.

I am working as Civil Engineer from year 2015 as well as freelancer and having great experience in horizontal as well as in vertical structures and also in Wet-Infrastructure. Skilled and... Read more

I am working as Civil Engineer from year 2015 as well as freelancer and having great experience in horizontal as well as in vertical structures and also in Wet-Infrastructure. Skilled and professional level experience in AutoCAD, Civil 3D, Revit, Openroads Designer, Infra-work, Microstation and also have experience Synchro. Worked on the following Projects - 2D and 3D modeling work for wet infrastructure projects such Sewage and Water Treatment plants and modeling of each unit of same industry. Plan and profile of Testwood (UK) road line pipe line in civil 3D Software. Plan and profile of Khultabad road project in Maharashtra. Road 3D Modeling for Samruddhi super expressway in Openroads and 4D simulation of same modeling in Synchro. AutoCAD to Microstation conversion work. 3D modeling of residential and commercial buildings in Revit and 3Ds Max. Close line - Having great experience in AutoCAD, Civil 3D and Openroads software. Hobbies - Learning the various civil engineering Softwares.

A competent professional with 15+ years of rich & extensive experience in designing & drafting with EPC company (including 3D modelling) Working software are PDS, Pro-pipe, Open Plant Modeler, Open... Read more

A competent professional with 15+ years of rich & extensive experience in designing & drafting with EPC company (including 3D modelling) Working software are PDS, Pro-pipe, Open Plant Modeler, Open Plant PID, MicroStation, AECOsim, PSDS, Autocad 3D, Revit (MEP) and Autocad. Have experience with designing, drafting & Isometric with MTO in Water treatment, Waste Water treatment, Industrial Effluent, Lifting pump station and Zero Liquid Discharge Plants. Expertise: Pipe detailing and BOQ, have good knowledge of industry pipe code (ASME B31.3 , ASTM D, AWWA, BS, AS & I.S.)

Piping 3D modeling Food and Beverage Water Treatment Sugar Refinery Pharma Plant Dairy Plant RO Skid Pasteurizer Skid UHT Skid Read more

Piping 3D modeling Food and Beverage Water Treatment Sugar Refinery Pharma Plant Dairy Plant RO Skid Pasteurizer Skid UHT Skid

Being a Director of a Company - Techno-Chat Technical Institute Private limited and Backed by a team of experienced professionals, our strategic engineering services meet the needs of all types... Read more

Being a Director of a Company - Techno-Chat Technical Institute Private limited and Backed by a team of experienced professionals, our strategic engineering services meet the needs of all types industries like oil & gas, petrochemical , power, water treatment etc. ​ 1) Pressure Vessel & Heat exchanger Engineering 2) Solid works Modelling 3) ANSYS 4)AutoCAD 2D & 3D Drawing & Modeling 5) PV Elite 6) HTRI Please visit our website foe complete services we offer https://www.techno-chat.com/engineering-services

Experience in Automation(PLC, SCADA & HMI) in Hydro, Solar, Lift Irrigation, water treatment plants and other control panels Read more

Experience in Automation(PLC, SCADA & HMI) in Hydro, Solar, Lift Irrigation, water treatment plants and other control panels

TOTAL EXPERIENCE: 10 YEARS (FROM NOV 2007 TO APR 2018) Over 10 years of experience in R.C.C detailing of Structures like Underground & superstructure in the field of Power Plant, Cement Plants,... Read more

TOTAL EXPERIENCE: 10 YEARS (FROM NOV 2007 TO APR 2018) Over 10 years of experience in R.C.C detailing of Structures like Underground & superstructure in the field of Power Plant, Cement Plants, Steel plant, Aluminum Handling Plant, Water treatment plant, Sewage Treatment Plant, Grade slab, All Underground & Ground R.C.C. detail Structures, Bar bending schedules & Strengthening work, Underground structures & Ground Detailing using AUTOCAD application Underground structures such as cable tunnels, pits, trenches, water tanks, conveyor tunnel, electrical substation basements, River water Intake well, CW pipe encasing structure, various fan foundations etc. Superstructure details such as RCC beam, slab, column, RCC wall, cable tray, pipe rack etc. Substation details such as MCC room beam, slab, columns, equipment supports etc. Transformer foundation, grade slab & drains etc.

Extensive experience in Mechanical Detail Engineering of Water, waste water & Industrial Water Projects. Overall detail Drawing work of Mechanical & Piping for Various Structures of Water treatment... Read more

Extensive experience in Mechanical Detail Engineering of Water, waste water & Industrial Water Projects. Overall detail Drawing work of Mechanical & Piping for Various Structures of Water treatment plant (WTP), Effluent treatment plant (ETP) & Sewage treatment plants (STP), Network Design & drawing work for water Distribution & Sewage collection system. Detail Mechanical & Piping Drawing of Pumping stations & Lifting stations for Water supply and Waste water projects. Worked in site Execution for Water & waste water Projects of Mechanical (Pumps, valves) & Piping Equipment. Detail Drawing of Distribution Network & Sewage Collection Network System. Mechanical and Piping drawing of Water treatment plant/Sewage Treatment plant. Preparation of L-section of water & sewer Network. Preparation of Mechanical System Drawings (Ventilation, AC system, Cranes & Hoists). Preparation of Basic Engineering Drawings (layout, PFD, P&ID, HFD). Preparation of Mechanical & Piping BOQ. A forward-thinking person with strong communication, analytical & organizational skills

Hello, my name is Anandaraj, and I am a passionate mechanical engineer with 10 years of experience in the field. I have always been fascinated by how things work and how to design innovative... Read more

Hello, my name is Anandaraj, and I am a passionate mechanical engineer with 10 years of experience in the field. I have always been fascinated by how things work and how to design innovative solutions to real-world problems. Throughout my career, I have gained expertise in product design, mechanical systems, manufacturing processes etc. I have worked on a diverse range of projects, including Water and Waste Water Treatments, Mining Industries, Cements industries, Material Handling Etc., I am skilled in utilizing various software tools, including Autodesk Inventor, SolidWorks, AutoCAD, CATIA and Creo. I have a strong understanding of engineering principles, materials, and manufacturing processes, which allows me to develop designs that are not only functional but also optimized for production. One of my strengths is my ability to collaborate effectively with cross-functional teams, including designers, technicians, and project managers. I am adept at communicating complex technical concepts to both technical and non-technical stakeholders, ensuring a smooth workflow and successful project outcomes. I am a problem solver at heart, and I thrive on tackling challenges and finding innovative solutions. I am known for my attention to detail, analytical thinking, and the ability to deliver projects on time and within budget. I am always eager to stay up to date with the latest advancements in the field of mechanical engineering. I continuously seek opportunities for professional development and further honing my skills to stay at the forefront of the industry. I am excited about the opportunity to bring my expertise, creativity, and dedication to a new project or organization. I look forward to contributing my skills to solve complex engineering problems and drive the success of future projects. Thank you for considering my introduction. I would welcome the opportunity to discuss further how my qualifications align with your needs. Please feel free to reach out to me at ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒