About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is... Read more

About This Gig Hello, Sir/Mam, Here is Muhammad Tanveer Mechanical engineer a modeling enthusiastic who is always ready to apply the Verification of analytical and numerical problems. A guy who is in love to design the concept base models and is always ready to bring creativity in the design out of the way. A guy who is ready to work with company to solve not only to solve the design problems but will bring the creativity in the design through economically as well as the safety point of view. I'll provide you the complete assistance in the FEA analysis in ANSYS workbench under static structural and transient modules of the ANSYS Workbench. I have done FEA analysis on the Cantilever beam under 6 DOF and also on springs for there responses as well as the fundamental frequencies associated with them and also available to do FEA analysis anytime you need me. I have done the FEA of the Spar Design of the Airplane with the beam, jigs and ribs i have lot of work and i can share it as well with the right person.

Hi and Welcome to MechFlow Designs If you are in need of 3d designs then you are in the right place! We are a company of professional Mechanical Engineers with over a 6 years of field experience.... Read more

Hi and Welcome to MechFlow Designs If you are in need of 3d designs then you are in the right place! We are a company of professional Mechanical Engineers with over a 6 years of field experience. We have a good experience in 3D model in accordance with ISO and ANSI standards. We can make a 3D model of your graphics or photographs of any mechanical or architectural objects. our skillset encompasses proficient 2D and 3D modeling using SolidWorks and AutoCAD. We have Expertise in 3d modeling, 3d product designing with FEA and CFD Analysis using ANSYS, we can also provide Rendering services using Blender, Keyshot and Fusion 360. Don't hesitate to get in touch, and let's bring your visions to life.

Hello! I’m a Mechanical Engineer with expertise in CAD and CFD. I’m proficient in using SolidWorks, Creo, and Ansys. I have a rich experience working as a CAD expert at Sabro Technologies. I offer... Read more

Hello! I’m a Mechanical Engineer with expertise in CAD and CFD. I’m proficient in using SolidWorks, Creo, and Ansys. I have a rich experience working as a CAD expert at Sabro Technologies. I offer a range of services including: Conversion of an idea into a 3D model Creating models from drawings Creating assemblies and simple parts Rendering Performing FEA and CFD analysis Generating drawings of existing CAD models I have a proven track record in the industry, having modelled chillers ranging in size from 60 to 110 tons and performed analysis on their frames. I have also performed CFD analysis on shell and tube heat exchangers. I look forward to bringing my skills and values to your project!

Hi I am Umer, Mechanical Engineer, I have a great proficiency in drafting, designing and simulations especially in AutoCad, Solidworks and Ansys. I try as much as possible to be realistic and... Read more

Hi I am Umer, Mechanical Engineer, I have a great proficiency in drafting, designing and simulations especially in AutoCad, Solidworks and Ansys. I try as much as possible to be realistic and bring your ideals to designs which can be implemented. Regarding FEA I have worked on the mesh techniques,result convergence and solver types for the best possible accuracy. I offer the following services: 1) 2d and 3D drafting and design 2) Modelings 4) Simulations And Design Analysis Report Writing 4) Detailing of drawings 5) 3D Printing and STEP files I will be using SOLIDWORKS 2016 and ANSYS 18.2. I assure you precise designs and accurate results. I am keen to work and interact with people all over the world I believe that respect is the word that matters the most in the world of Freelancing.

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4... Read more

R&D Projects a. Computational Methodology to Solve Reactions for Statically Indeterminate Beams on Flexible Mounts -The computational methodology was sorted out to solve the reaction forces on 4 and 6 axles vehicle. -Already available analytical approaches were studied: Elastic Curve Equation, Three-Moment Equation, and Beams on Elastic Foundation. - Experimental Rig setup was devised and results were compared with the computational methodology. - A research paper of this study was published in IBCAST-2016 Conference. b. FEA Study of Crane Out trigger Mat -Developed a finite element analysis procedure for simulation of stiffness behavior of foundations under large-scale loads. -The study was required for criteria building of ATPs for safe handling of the crane and its outriggers. -It was also published in the International Conference on Structural Dynamics & Vibrations (ICSDV-2014). c. Mathematical Modeling of 8 Axle Vehicle Steering - Mathematical modeling in MATLAB/SIMULINK for an eight- axle steering system to simulate the behavior while turning for 6DOF Steward Platform Motion Simulator. Mechanical Design Projects a. Landing Gear of a Light Aviation Grade RC Plane (Ongoing Project) - Mathematical modeling of landing gear placement and finalization of its configuration. - Mechanical component design of the nose and main landing gear deploying mechanisms with locking and unlocking arrangements at deployed and retracted positions as per QMS of AS-9100C. - Closing/Opening of landing gear stowage bay door with the same EMA of the nose landing gear. b. Mechanical Design - Modeling and designing of various mechanical structures/mechanisms using CAD modeling software. - Preliminary and detailed engineering calculations at the conceptual and detailed engineering phase of the project. -Validation of modeled systems through the aid of FEA tools (ANSYS/ABAQUS). -Taking projects through the Phases of Product Development Cycle (PDC) as per QMS of ISO or AS- 9100C.

Mechanical Design Engineer with a passion for product design and development and with over 5 years of experience in the field, I possess a unique blend of technical expertise and project management... Read more

Mechanical Design Engineer with a passion for product design and development and with over 5 years of experience in the field, I possess a unique blend of technical expertise and project management skills that would enable me to add value to your team. At Cowlar Inc, I played a pivotal role in developing cutting-edge commercial products and IoT devices that have transformed the industry. My responsibilities involved designing and validating products using 3D printing, identifying global vendors and manufacturers, and ensuring optimal pricing and production. I am proud to say that I have a proven track record of delivering cost-effective, reliable, and sustainable products that meet end-users' needs. Moreover, I have a solid background in using the latest sourcing techniques and tools, such as digital procurement platforms and project management software. I believe that my proficiency in agile project management and CAD modeling can help streamline processes, enhance efficiency, and reduce costs. Prior to this, I worked at AKSA-SDS Islamabad, where I honed my skills in FEA analysis, thermal solutions, and additive manufacturing for rapid prototyping. I designed parts, components, and assemblies for various projects and ensured their seamless integration with other systems. I am excited about the opportunity to bring my expertise to your team and contribute to your company's success. I am confident that my skills and experience make me a strong candidate for this position, and I look forward to discussing my qualifications further.

An 𝑬𝒙𝒑𝒆𝒓𝒊𝒆𝒏𝒄𝒆𝒅 𝑴𝒆𝒄𝒉𝒂𝒏𝒊𝒄𝒂𝒍 𝑬𝒏𝒈𝒊𝒏𝒆𝒆𝒓 working for the past 10 years with a variety of clients in industries such as 𝑨𝒆𝒓𝒐𝒔𝒑𝒂𝒄𝒆, 𝑶𝒊𝒍 & 𝑮𝒂𝒔 and 𝒎𝒂𝒏𝒖𝒇𝒂𝒄𝒕𝒖𝒓𝒊𝒏𝒈. I am your guy for New Product Development... Read more

An 𝑬𝒙𝒑𝒆𝒓𝒊𝒆𝒏𝒄𝒆𝒅 𝑴𝒆𝒄𝒉𝒂𝒏𝒊𝒄𝒂𝒍 𝑬𝒏𝒈𝒊𝒏𝒆𝒆𝒓 working for the past 10 years with a variety of clients in industries such as 𝑨𝒆𝒓𝒐𝒔𝒑𝒂𝒄𝒆, 𝑶𝒊𝒍 & 𝑮𝒂𝒔 and 𝒎𝒂𝒏𝒖𝒇𝒂𝒄𝒕𝒖𝒓𝒊𝒏𝒈. I am your guy for New Product Development (𝐍𝐏𝐃). I have all the required skills to take a project from 𝒊𝒏𝒊𝒕𝒊𝒂𝒍 𝒄𝒐𝒏𝒄𝒆𝒑𝒕 𝒎𝒐𝒄𝒌𝒖𝒑𝒔 till final 𝒑𝒓𝒐𝒅𝒖𝒄𝒕𝒊𝒐𝒏 and bulk 𝒎𝒂𝒏𝒖𝒇𝒂𝒄𝒕𝒖𝒓𝒊𝒏𝒈 🙌 10+ Years of Experience as *Mechanical Engineer* 🥇 100% Job Success Score 🥇 25+ Products delivered 🥇 50+ 3D modeled Assemblies 🥇 25+ Computes aided Engineering Analysis(FEA & CFD) I work hard to make things easy for my clients. Above that quality and on-time delivery makes my clients happy and thankful. I am accustomed to minimizing production cots by the use of standard off-the-shelf (𝐎𝐓𝐒) components from reliable suppliers e.g. Mcmaster. I also provide prototyping services and have all the required resources, including 3D printers (FDM, SLA), laser cutter, CNC and other workshop facilities. Afterwards, if needed, I can connect you with reliable Chinese manufacturers too. I look forward to discussing your project with you on chat /call. 𝐒𝐞𝐫𝐯𝐢𝐜𝐞𝐬 I offer: 1. 3D Model/assembly creation 2. 𝐃𝐅𝐌 (Design for Manufacturing), 𝐃𝐅𝐓 (Design for testing) & 𝐃𝐅𝐀 (Design for Assembly) 3. Machine & Product design/testing 4. 2D drawing for manufacturing 5. Stress analysis (𝐅𝐄𝐀, Finite Element Analysis) 6. Flow Analysis ( 𝐂𝐅𝐃, Computational Fluid Dynamics) 6. Rapid prototyping using additive manufacturing (𝟑𝐃 𝐩𝐫𝐢𝐧𝐭) Engineering 𝐒𝐨𝐟𝐭𝐰𝐚𝐫𝐞𝐬 I am proficient with: 1. Solidworks (Parametric Modelling) 2. Autodesk Inventor (Solid Modelling) 3. Fusion 360 (Solid Modelling) 4. Ansys (CAE, FEA, CFD) 5. Keyshot (Rendering) 𝐈𝐧𝐝𝐮𝐬𝐭𝐫𝐢𝐞𝐬: • Health & Wellness • Automotive • Art & Design • Education • Engineering & Architecture • Manufacturing & Construction 𝐖𝐡𝐲 you should choose me: • Free consultation on initial design brief • After Service support • 24*7 available to solve your query. 🙌 Thank you for taking the time to look over my profile. Let's connect and discuss this in detail.