Hire Local CAD Designers near Wayne, Pennsylvania

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Renderi... Read more

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Rendering, Strain, and Flow Analysis Trained Hobbies: Music, Art, Optics, Robotics, Soccer, Video Games

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned... Read more

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned. Joining your firm will gauge where I stand. No better opportunity than this can come my way. I can showcase my talent and prove my skills here, while in turn, I can learn how this industry functions in and out. That is why you may hire me for this internship.

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background w... Read more

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background with a powerful record of ten years active expertise in diagnostic repair, project and merchandise development, business management, and engineering strategies. Established ability to with success analyze a team’s skills and hone in on those attributes to form a cost effective workplace. Demonstrates the flexibility to quickly learn in new areas furthermore delivering new ideas to the table, has effectively showcased being a convergent thinker and a pacesetter.

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3... Read more

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3.0 and (REX- Reverse Engineering Extension , Autodesk Inventor, Geomagic Design / Design X, AutoCAD (Mechanical), and Autodesk Fusion 360. I'm also highly skilled in the following CAD/CAM Software: MasterCam X7 to X9, Esprit, Bob cad /cam

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester... Read more

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester University of Pennsylvania Biomedical Engineering program to adopt more 3D printers and expand their CAD softwares through my own use of such technology. Through such technological skills, I played a role in 3 additional Senior Design Projects aside from my own as a Junior and Senior with my 3D modeling and printing expertise, and improved the technical outputs of Chester High School to inspire students into STEM field careers by helping a team win 2nd place in their local science fair competition with a modular, 3D printable water filter. My background in designing biomedical devices, engineering hydroponic system attachments, assembling mechanical systems, and fine-tuning 3D printable gadgets will bring a wide perspective and various technical skills to any project.

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a... Read more

I am a graduate Mechanical Engineering student at the University of Pittsburgh's Swanson School of Engineering. I am in a dual field of Structural and Robotic Engineering. Right now I am working on a structural project that will be going on the International Space Station in 2019 and a Solar Panel Project for a small village in Panama. Outside of Engineering I really enjoy making music and helping set up for concerts.

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off... Read more

passionate mechanical engineer with 5 years of automotive design and product prototyping experience. I've done design work and testing for OEMs as well as design work for Formula SAE cars and one off racecars and custom engineered cars. I've designed parts to be made using every manufacturing method, sheetmetal, 2d and 3d subractive, additive (SLA,FDM,SLS, etc.) and will make the necessary DFM decisions based on your needs. Every part i make will be 100% analysed for it's design specifications (FEA, CFD, etc) , with function and form developed for it's use case.

Over 8 years of experience in CAD/CAM industry with hands-on machining operation for Northwood, Fadal machines.

Over 8 years of experience in CAD/CAM industry with hands-on machining operation for Northwood, Fadal machines.

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented... Read more

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented and strive to take initiative and complete design work above and beyond customer requests.

I have a bachelor's degree of Industrial Design from Pratt Institute in Brooklyn, NY and am currently based out of Philadelphia, PA. I have worked on a variety of projects including consumer injection... Read more

I have a bachelor's degree of Industrial Design from Pratt Institute in Brooklyn, NY and am currently based out of Philadelphia, PA. I have worked on a variety of projects including consumer injection moulded kitchen tools, high tech smart glasses, furniture, retail pop ups, stairs, etc. My experience has given me a keen ability to take an idea and turn it into something manufacturable. My skills include CAD modeling, fabrication drawings, material optimization, and detailed aesthetic consideration

Solidworks design and testing 3-D printing capabilities Prototype design and revision options Manufacturing experience to help with design and revisions to drawings

Solidworks design and testing 3-D printing capabilities Prototype design and revision options Manufacturing experience to help with design and revisions to drawings

Mechanical Engineering PhD Fellow at Drexel University, working on Plasma Technology with experience in both Pharma and Aerospace sectors. I have half a decade of experience with Solidworks. Additiona... Read more

Mechanical Engineering PhD Fellow at Drexel University, working on Plasma Technology with experience in both Pharma and Aerospace sectors. I have half a decade of experience with Solidworks. Additionally, I have practical manual machining experience that fuels my designs as I believe simplicity is normally the most elegant answer

I am a registered architect in the state of Pennsylvania with 8+ years experience in the architecture and design industry. I have extensive drafting and modeling experience working in jurisdictions ar... Read more

I am a registered architect in the state of Pennsylvania with 8+ years experience in the architecture and design industry. I have extensive drafting and modeling experience working in jurisdictions around the United States.

I have worked on a variety of projects within the areas of mechanical, civil and electrical disciplines. I have also worked in the facilities engineering department at several companies. I have used A... Read more

I have worked on a variety of projects within the areas of mechanical, civil and electrical disciplines. I have also worked in the facilities engineering department at several companies. I have used AutoCAD and MicroStation for my drafting or design work.

Experienced in a plethora of civil engineering projects from small parking lots to amusement park to school athletic facilities. Highly efficient Civil 3d but I'm proficient in GIS, for map building,... Read more

Experienced in a plethora of civil engineering projects from small parking lots to amusement park to school athletic facilities. Highly efficient Civil 3d but I'm proficient in GIS, for map building, infraworks, for 3d models and videos and auto turn. I've done some light sketch ▒▒▒▒▒▒▒

As an Autodesk Inventor expert and Mechanical Engineer, I know how to optimize designs for the best weight, cost, and performance. I have worked with companies all over the world, from start-ups to m... Read more

As an Autodesk Inventor expert and Mechanical Engineer, I know how to optimize designs for the best weight, cost, and performance. I have worked with companies all over the world, from start-ups to multi-billion dollar corporations. I have multiple certificates in Autodesk Inventor and Vault with a specialization in automation and Product Development. I have over 10 years experience with Autodesk Inventor, over 18 years of programming experience (including 7 years of experience with iLogic and developing Excel VBA spreadsheets for model and drawing automation). Some of my latest projects include: - iLogic script to fully-automate a Product Configurator, capable of handling 49,000,000 unique assemblies and drawings - Tool to automatically publish one or several model(s) and drawing(s) in multiple file file formats - VBA script to directly link the ERP system (SQL database) to the Autodesk Inventor Bill of Material for validation - iLogic script to allow for error-checking, missing information, and update drawing blocks - ... hundreds of other projects that I would be happy to discuss if you have a specific example

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Fin... Read more

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Finding and incorporating other mechanical components from McMaster-Carr depending on project needs - Using 3D printers and slicer software - Using other illustration software such as Procreate for graphic design and infodiagrams

Architectural professional with 12+ years of experience delivering commercial, residential, and retail projects. Expert in Revit, construction documentation, and coordinating projects from concept thr... Read more

Architectural professional with 12+ years of experience delivering commercial, residential, and retail projects. Expert in Revit, construction documentation, and coordinating projects from concept through construction.

I have thorough experience in3d printing and modeling. Interested in fluids and automation. Experience with conveyors, welding, production breakdown, lean manufacturing,and process engineering.

I have thorough experience in3d printing and modeling. Interested in fluids and automation. Experience with conveyors, welding, production breakdown, lean manufacturing,and process engineering.

I am a college student looking to gain more experience. I have been able to purchase my own 3D architectural design program while going to school full time to gain a B.S. in Residential Construction T... Read more

I am a college student looking to gain more experience. I have been able to purchase my own 3D architectural design program while going to school full time to gain a B.S. in Residential Construction Technology and Management. My dream is to start my own homebuilding company, but for now, I am wanting to start small with additions and remodelling projects.

Experienced Electrical Engineer with extensive experience in the shipbuilding/ design industry. Involved in the electrical design development for various marine vessels, including Commercial, Naval, a... Read more

Experienced Electrical Engineer with extensive experience in the shipbuilding/ design industry. Involved in the electrical design development for various marine vessels, including Commercial, Naval, and Passenger Ships. Proficient in designing and implementing electrical systems, including Power System, Lighting, Fire, Navigation & Communication systems ensuring compliance with industry standards and regulations. Skilled in utilizing industry-leading software and tools, such as AutoCAD, DIALUX, and CADMATIC, to design, simulate, and analyze electrical systems. Aware of various classification society rules.

Recent graduate from Lehigh Unversity, but moved into teaching high school vocational engineering. Constantly looking for a challenge in design and engineering. I have worked on several projects spann... Read more

Recent graduate from Lehigh Unversity, but moved into teaching high school vocational engineering. Constantly looking for a challenge in design and engineering. I have worked on several projects spanning several disciplines. Below are a few such projects: - An LCD screen readout for my racing simulator rig via USB and background network data. - FIRST Robotics Competition Robots (As a student: 2008-2011; As a mentor: 2013- Present). - Formula SAE Race Car at Lehigh University (X-42, X-43, X-44, X-45). - High school senior project: Electric Go-Kart, 3-D Modeled F1 Car designed to the 2011 Spec rules. - Car sensor for bicycles and motorcycles using ultrasonic sensors.

I actively work to provide custom systems for factory automation. I also have experience with 3d printing.

I actively work to provide custom systems for factory automation. I also have experience with 3d printing.

I have spent over 30 years in the jewelry manufacturing industry. Work daily in Gemvision Matrix and 3d printing.

I have spent over 30 years in the jewelry manufacturing industry. Work daily in Gemvision Matrix and 3d printing.

I have the knowledge and skills to design complex mechanical systems with precision and efficiency. My proficiency in using SolidWorks ensures that my designs can be translated seamlessly into real-w... Read more

I have the knowledge and skills to design complex mechanical systems with precision and efficiency. My proficiency in using SolidWorks ensures that my designs can be translated seamlessly into real-world products. My experience and strengths have been with: - Plastic Injection Molded Part Design - Sheet Metal Design - Weldment Design - Test Fixture Design