Hire Robotics Designers in United States

Machine and product designer with experience in a wide array of fields including automation, consumer products, military applications, 3d printing, and robotics.

Machine and product designer with experience in a wide array of fields including automation, consumer products, military applications, 3d printing, and robotics.

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have d... Read more

I started out in school studying electronics and robotics. Started building machines and gradually worked up to design equipment. I have been designing equipment for over twenty years now. I have designed equipment for many different industries; aluminum & steel mills, automotive assembly plants, assembly work cells, petrol/chemical plants, pharmaceutical plants. let me put my years of design experience to work for you.

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

Hello, I am a mechanical design engineer with a strong background in CAD, simulation tools, and rapid prototyping. My experience spans impactful projects in aerospace, healthcare, and consumer technol... Read more

Hello, I am a mechanical design engineer with a strong background in CAD, simulation tools, and rapid prototyping. My experience spans impactful projects in aerospace, healthcare, and consumer technology. Recognized as a SOLIDWORKS Champion, I bring industry experience from TruNav LLC and Olipasu Engineering. I am committed to innovation in robotics and mechanical design, regularly working on personal projects to sharpen my skills and stay current with the latest technologies and research. I am always eager to learn and improve.

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsda... Read more

► Ultra-Talented Design, Electrical, & Mechanical Engineer ► 8+ Years of Intense Multi-Faceted Experience ► Owns commercial office with CNC machines, 3D printer & other industrial assets in Scottsdale, AZ. ► Designed & Engineered WORLD'S most advanced luxury wallet, medical equipment, industrial components, products & more at: ♦VIEW PORTFOLIO & EXHIBIT:♦ w w w . lovesobhani . c o m From napkin-sketch to fully-functional final prototype, he's been there every step of the way. He's designed & engineered entire products (electrical, software & mechanical aspects) for nearly a decade on a contractual basis with prophetic proficiency. This created a multi-specialty Prototype & Design Engineer that is a super talented, professional expert with many intricacies of: ► Product Design & Engineering ► CAD Modeling ► ElectroMechanical Design & Engineering ► Realistic Rendering ► DFM (Design for Manufacture) Techniques ► Component Design ► Circuit & PCB Design ► Product Development & Optimization ♦ FULL PROFESSIONAL EXPERIENCE: ♦

Solidworks and Solid Edge design engineer specializing in electro-mechanical machine design. Professional experience includes fall protection/material handling, rotary heat exchangers, robotics, and f... Read more

Solidworks and Solid Edge design engineer specializing in electro-mechanical machine design. Professional experience includes fall protection/material handling, rotary heat exchangers, robotics, and food handling machine design. Glad to join in on the creative process and turn an idea into reality.

I am a high school junior with 5 years of engineering design as well as CAD design experience in fusion 360. I am the team captain and lead of the CAD team for my robotics team. I have done various od... Read more

I am a high school junior with 5 years of engineering design as well as CAD design experience in fusion 360. I am the team captain and lead of the CAD team for my robotics team. I have done various odd design jobs including projects for an indie car team. Being on a robotics team, I am very good at ensuring that all of my models can be created in the real world.

I've been a CAD designer since 2023. I specialize in Fusion 360 but I also have experience in SolidWorks, Onshape, and FreeCAD. I have additional experience in robotics and mechanical engineering an... Read more

I've been a CAD designer since 2023. I specialize in Fusion 360 but I also have experience in SolidWorks, Onshape, and FreeCAD. I have additional experience in robotics and mechanical engineering and am currently finishing a degree in Mechatronics Engineering.

Engineering student with 3 years SolidWorks modeling, drawing, and animation experience with a focus on robotics. Additional experience with and access to a 3D printer. FIRST robotics competitions alu... Read more

Engineering student with 3 years SolidWorks modeling, drawing, and animation experience with a focus on robotics. Additional experience with and access to a 3D printer. FIRST robotics competitions alumni with 5 years experience.

I consider myself to be an inventor. My passion is making ideas into tangible reality. The concept of inventing can stem from both physical objects to developing better people teams. I have worked wit... Read more

I consider myself to be an inventor. My passion is making ideas into tangible reality. The concept of inventing can stem from both physical objects to developing better people teams. I have worked with 17 teams, being either the leader or teammate. Projects - Worked on a total of 16 robots in FTC robotics - Created multiple hyper-realistic CAD models of our robots, modeling textures, deformities, tolerances, appearances, materials, realistically moving in real-time, and dimensionally accurate to 0.001in - Instrumental team member in creating a successful 120lb, 4ft tall robot for FRC. - Designed a swerve drive, the most advanced drivetrain - Created three 150-page engineering notebooks of highly advanced technical documentation - Ran 21 studies of generative design, the world’s leading CAD technology - Created 87 animations and technical drawings showing how to build my teams’ robots and designs - Built an advanced robot with a fully rotatable scissor lift, extendable arm, and claw, and capable of driving - Created a robotic hand that models a human hand in real-time - Currently mentoring 10 high school robotics teams - Currently mentoring a Science Bowl team

Started out with 2D AutoCAD in 1992. Moved up to 3D (Pro-ENGINEER) in 1993 and designed new food processing equipment for 10 years. Move to a large pump design company and designed municipal pumps f... Read more

Started out with 2D AutoCAD in 1992. Moved up to 3D (Pro-ENGINEER) in 1993 and designed new food processing equipment for 10 years. Move to a large pump design company and designed municipal pumps for 15 years. Moved to a Robotics company and design robot components. All the while, I did freelance 3D Design for inventors, new product developers and a wide variety of companies on their projects. I continue to work in 3D Design because I love the work and I love helping people bring their ideas into fruition.

5+ years CAD Design

5+ years CAD Design

I am a 22 year-old graduate with an AAS in Engineering Design Technology looking to get experience, practice my CAD skills, and working on a variety of projects. I have a passion for design, and love... Read more

I am a 22 year-old graduate with an AAS in Engineering Design Technology looking to get experience, practice my CAD skills, and working on a variety of projects. I have a passion for design, and love 3D modeling. Between FIRST Robotics and college, I have over 5 years of CAD Experience.

Strangely enough, I was a recreation therapist for almost 20 years. Prior to that, I earned a degree in fine art and then didn't do too much with it because I became more interested in psychology. M... Read more

Strangely enough, I was a recreation therapist for almost 20 years. Prior to that, I earned a degree in fine art and then didn't do too much with it because I became more interested in psychology. Meanwhile, I've had an interest in RC cars and robotics. Leveraging an innate talent for engineering and my previous sculpting prowess, I now own and operate a boutique 3D design and 3D printing studio. From home decor and sculptural objects to machine parts and custom things, I pretty much do it all. I'm experienced in prototyping as well as fine art pieces. My primary design tools are Fusion 360, Meshmixer and Prusa Slicer. I also have 8 high-quality 3D printesr ready to fabricate prototypes or finished products. This includes full-color prints in the following materials, TPU, PLA, PETG, ASA, ABS, PC, nylon as well as reinforced and specialty polymers. I can do post-processing such as vapor smoothing, flame polishing, sealing/coating, bonding and welding.

My name is Mack and I am a Mechanical Design professional located in Colorado, USA. I specialize in lightweight component design for Robotics and Autonomous Systems as well as hardware design for Avia... Read more

My name is Mack and I am a Mechanical Design professional located in Colorado, USA. I specialize in lightweight component design for Robotics and Autonomous Systems as well as hardware design for Aviation and Outdoor Extreme Sports. I also operate a CNC Machine shop and test facility. We specialize in nonferrous metals. As a certificated Mechanical Designer, I am not only an expert in 3D Modeling/CAD, but I am also well versed in Drafting Standards, CNC Manufacturing Standards, Geometric dimensioning & Tolerancing(GD&T) and I implement Quality control processes in my design workflow. This saves on time and stress as your project continues. I am open to most projects, but keep in mind it is mutually beneficial if I work on projects I have a deep interest in. I have worked on projects from Offroad race trucks to Drones and robots for the film industry. My field of continued study is mostly in the realm of lightweight, mechanical components for Robotics and drones. However, my experience is far-reaching and my knowledge gained in the industry has numerous applications. I typically like to do a short discovery session to see if I can be useful on your project.

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, ro... Read more

I am a product design and development specialist with a background in Mechanical Engineering. I received my degree from Northeastern University in 2011 and, since then, have worked in the medical, robotics, consumer electronics, process valve controller, and elevator device industries. With over 8 years of experience in the iterative product development process, I've gained the experience and skill set necessary - in 3D CAD, model creation, design for manufacturability and assembly, manufacturing expertise, prototyping, test development, project management, and supply chain management - to bring your ideas to life seamlessly and efficiently. No matter what - the scope/size of the project, product, or material - I can help you get it manufactured and into your hands quickly. There are no restrictions or requirements to my service, if you'd like for me to just create the design files then that's not a problem either. Please feel free to contact me with any inquiries. I'm looking forward to working with you. **Resume and design portfolio available upon request**

https://www.youtube.com/watch?v=xkhk6fLjKis (Youtube Video about Toni volunteering for a robotics team) Toni grew up in Minnesota, but is now running Carlstrom Design out of her home in Washington... Read more

https://www.youtube.com/watch?v=xkhk6fLjKis (Youtube Video about Toni volunteering for a robotics team) Toni grew up in Minnesota, but is now running Carlstrom Design out of her home in Washington State. In her free time, Toni enjoys volunteering with a local robotics team called The Bearded Pineapples, going on hiking and skiing adventures, and writing. Toni enjoys being an independent Mechanical Engineer because the variety of work allows her to be creative every day! Thank you for considering Toni for your job. If you have any questions about her services or past work, feel free to reach out via email or phone call!

SUMMARY OF QUALIFICATIONS ●Assigned as Lead CAD Designer / ECM Operations at Adaptive Energy LLC. Working with a full team of 30+ to help innovate & design Solid Oxide Fuel Cell Batteries, update comp... Read more

SUMMARY OF QUALIFICATIONS ●Assigned as Lead CAD Designer / ECM Operations at Adaptive Energy LLC. Working with a full team of 30+ to help innovate & design Solid Oxide Fuel Cell Batteries, update company CAD Documents to Industry Standards, and lead our team in a positive and innovative direction within ECR/ECN meetings. ● 10+ Years Work experience with 2D/3D AutoCAD & SolidWorks; Designs including, but not limited to, Mechanical, Electrical, Fuel Cell Battery, Automotive, Carriers, Conveyors, Piping, HVAC, Structural Steel, Hanging Steel, Conveyor Platforms, Automation, Robotics, Powder Coating, etc. ● Associate degree in Computer Aided Mechanical Design (2012), 8+ Years of CAD and engineering course work, and four years of collegiate level course work experience in AutoCAD and SolidWorks. ● Was given the role of Lead Engineer/Draftsmen in past employment on several different projects and was tasked with supplying full design and install drawings for the customer, some of which included Tesla Motors, Dearborn Mid-West, Kuecker Logistics Group, Chrysler-Windsor, etc. ● Was given the role of Project Engineer in past employment and was tasked with keeping track of all job processes (material flow, project delivery time, etc.), while also designing and checking all CAD drawings that went into fabrication. ● Strong attention to detail with computer programs and drawings; adapts easily to new project concepts and innovative technology. ● Well organized and detail-oriented, with a proven ability to manage time effectively and improve workflow. ● Strength in following directions, analyzing, guaranteeing customer satisfaction, and completing tasks on time.

I have over 10 years of CAD experience in many industries, including medical, robotics, fluids / hydraulics, and materials. Experience with CNC, casting, plastic molding, laser cutting, and 3D printin... Read more

I have over 10 years of CAD experience in many industries, including medical, robotics, fluids / hydraulics, and materials. Experience with CNC, casting, plastic molding, laser cutting, and 3D printing.

I'm Richard L. Mohabir, an engineer specializing in mechanical and mechatronics projects. I hold an M.S. in Robotics Engineering and a B.S. in Mechanical Engineering from Worcester Polytechnic Institu... Read more

I'm Richard L. Mohabir, an engineer specializing in mechanical and mechatronics projects. I hold an M.S. in Robotics Engineering and a B.S. in Mechanical Engineering from Worcester Polytechnic Institute (WPI). Throughout my career, I have worked on various notable projects, such as building an ignition circuit for aerospace experiments, designing the electrical circuit and mechanical enclosure for a motor system's control panel, and developing sheet metal jigs and weldment fixtures to streamline the deployment of robotics systems. I'm currently looking to take on new and exciting projects that I can work on in my spare time.

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Renderi... Read more

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Rendering, Strain, and Flow Analysis Trained Hobbies: Music, Art, Optics, Robotics, Soccer, Video Games

I am a mechanical engineering graduate with professional experience designing for startups and research labs. I also lead a robotics project which consists of designing a novel human hand shaped end e... Read more

I am a mechanical engineering graduate with professional experience designing for startups and research labs. I also lead a robotics project which consists of designing a novel human hand shaped end effector to mimic human dexterity. Additionally, I am certified as a SolidWorks professional from Dassault Systems.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

I have taken many CAD classes and have earned a certificate in SolidWorks. I'm currently a junior in Mechanical Engineering, and I first started using CAD in a robotics program in high school. From de... Read more

I have taken many CAD classes and have earned a certificate in SolidWorks. I'm currently a junior in Mechanical Engineering, and I first started using CAD in a robotics program in high school. From designing a scale model of an SR-71 to unique coasters, I've learned many techniques that I'm looking forward to using for whatever your needs may be.

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC rob... Read more

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC robotics team. Each year we design and build a 125lb robot and it is my job to direct this process. I have certified my abilities with the CSWP and CSWA exams which establish my ability as professional grade

Experienced, enthusiastic, and innovative mechanical design engineer with extensive experience in machine and product design, robotics, factory, and production automation.

Experienced, enthusiastic, and innovative mechanical design engineer with extensive experience in machine and product design, robotics, factory, and production automation.