Hire Product Design Designers in South Africa

I am a qualified Industrial Designer , I obtained a BA degree at The Open Window Institute. I am passionate about my industry and have a love for fine art. I am a hard-working, ambitious being who... Read more

I am a qualified Industrial Designer , I obtained a BA degree at The Open Window Institute. I am passionate about my industry and have a love for fine art. I am a hard-working, ambitious being who can take on any challenge presented to me.

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise... Read more

I completed my Master's degree in Mechanical engineering. I have 7 years of experience working with 2D/3D CAD modelling packages such as Autodesk Inventor, AutoCAD, and SolidWorks. I have expertise in but not limited to the following: - Mechanical Component Design - 3D and 2D CAD Model * Technical drawings - Isometric and section views * Stress analysis of the components - Mechanical System Design - Assembly * Complete assembly * Bill of materials * Assembly animation * Motion study - Product design - 3D Rendering * Solidworks 360 render * KeyShot - Civil and Architectural Layouts * Floor plans * Section drawings I have acquired a sound knowledge of engineering principles, tools, and practices, with emphasis on designing, building, and testing of mechanical systems. I completed several projects namely: - Centrifugal compressor test bench - Servo-controlled hydraulic actuator test bench - Compressor and turbine impellers - Combustor - Quadcopter - Design of water dispenser, using vapor compression refrigeration cycle.

Drawing from a rich background in goldsmithing, I embarked on my journey as an apprentice, mastering the intricacies of craftsmanship from the ground up. It was during this formative period that I... Read more

Drawing from a rich background in goldsmithing, I embarked on my journey as an apprentice, mastering the intricacies of craftsmanship from the ground up. It was during this formative period that I first encountered CAD software, specifically Rhino3D, which revolutionized my approach to jewelry design. The transition from traditional techniques to digital platforms opened up a world of possibilities, igniting my passion for 3D modeling. Driven by a relentless curiosity, I delved deeper into the realm of digital design, pursuing additional training in 3D modeling techniques and discovering the transformative power of poly-modeling with 3DS Max and rendering with Vray. This newfound knowledge empowered me to not only design jewelry for 3D printing and casting but also to expand my horizons into product design. With a blend of traditional craftsmanship and cutting-edge technology, I seamlessly integrated CAD into my workflow, leveraging its capabilities to craft intricate designs and generate photorealistic renders. Recognizing the untapped potential of my skills, I transitioned into offering my services as a 3D designer, specializing in designing and rendering jewelry and various products. Today, armed with over 9 years of experience, I continue to channel my passion for design into every project I undertake. I invite you to explore my portfolio, a testament to my journey from apprentice to seasoned 3D artist, and discover the artistry and precision that define my work.

Good Day My Name is Pieter Specialize in 3D Modeling and realistic photo renders. I have been working for two years as a graphic designer and for three years as a product designer. I have been... Read more

Good Day My Name is Pieter Specialize in 3D Modeling and realistic photo renders. I have been working for two years as a graphic designer and for three years as a product designer. I have been working on Inventor for four years and worked in the trailers industry for two years making truck trailers, for example, semi-trailers, abnormal trailers, low beds. Then switch to machine designs like plastic welders, vacuum formers, which also included electric diagrams. Can write CNC programs and NC programs. I Believe the customer comes 1st in all projects, and I aim to supply the best quality of work I can provide to the customer.

I finished my studies in Industrial Design at the University of Johannesburg in 2008. I have been building experience working as an Industrial designer in various factories, developing designs from... Read more

I finished my studies in Industrial Design at the University of Johannesburg in 2008. I have been building experience working as an Industrial designer in various factories, developing designs from the conceptual phase, right through to production and installation. While accumulating real-world manufacturing experience, I have been building my freelance career for more than 10 years. Expanding my field of expertise into Graphic Design, Product Development, Materials and Manufacturing knowledge, Packaging Design as well as Point of Sale, and Exhibition Design.

. Fast design and drawing skills in Solidworks, currently running 2020 can work in lower years . Design from concept to full assembly and manufacturing drawings. - Concept Design, - Product... Read more

. Fast design and drawing skills in Solidworks, currently running 2020 can work in lower years . Design from concept to full assembly and manufacturing drawings. - Concept Design, - Product Design, - Industrial Design, - Mechanical Design, - Rendering, - Strength Analysis, - Technical Product Documentation - 3D Printing and prototyping

My name is Marco Lopes and I am a Mechanical Design Engineer, with 4 years of experience. I am a young and enthusiastic mechanical engineer passionate about problem solving, design engineering and... Read more

My name is Marco Lopes and I am a Mechanical Design Engineer, with 4 years of experience. I am a young and enthusiastic mechanical engineer passionate about problem solving, design engineering and technology, capable of designing mechanical systems from first principles through to working prototypes. My greatest strengths include the ability to apply my engineering knowledge to real world problems, actively within the work space and the ability to take the initiative in a project environment. with experience in; • 3D modelling (Autodesk Inventor) • 2D drafting (AutoCAD) • Mechanical design • Component design • Product design I have 4 years of engineering experience in the fast-paced automotive production industry and recently the heavy rigging and construction industry. I work well under pressure and always ensure work is completed in a timely manner at an impeccable standard. Working in the automotive production industry, I was tasked with the design and simulation of automotive tooling components for companies such as Ford, Opel and BMW. The tooling components formed part of the complete production process line. Working in the heavy rigging construction industry I am tasked with designing specialized lifting equipment for unique engineering lifts. I work in and among all types of industries, giving me broad spectrum of basic engineering understanding in all engineering disciplines. I am capable of bringing your design ideas to life and producing working prototypes. In addition to design and modelling services, I can provide other engineering services such as, technical communication, report writing and project management. Please feel free to contact me with any questions or project inquiries, I am more than willing to discuss ideas and potential projects.

2d & 3d Autocad and Inventor designer/draughtsman . 32 years experience in mechanical engineering/manufacturing/draughting/design -Drawing Board (3 yrs) --Cad (28 yrs) ---Cadkey (4 yrs)... Read more

2d & 3d Autocad and Inventor designer/draughtsman . 32 years experience in mechanical engineering/manufacturing/draughting/design -Drawing Board (3 yrs) --Cad (28 yrs) ---Cadkey (4 yrs) ---AutoCAD 2d & 3d (16 yrs) ---Inventor (4 yrs) ---Autocad and Inventor Simultaneously (4 years) ---(and recently Autocad/Inventor Customisation) . Mining & Processing - 4 years Electrical Schematics & layouts - 1 1/12 years Aircraft Ground Support - 1 1/2 years Trailers, Tankers, Bus & Van Bodies - 6 1/2 years Diesel Engine Repower/Assy/Localisation - 7 years Formwork Scaffolding - 5 years High speed train civil works - 3 1/2 years Other miscellaneous mechanical/manufacturing - 3 years . Higher Diploma Mechanical Engineering Member SouthAfrican Institute of Mechanical Engineers Technician Member Engineering Council of South Africa Collaborator (Rank 9) on Autodesk Autocad & Inventor Forum Certified Autocad & Inventor Professional Certified Autocad & Inventor Trainer . Autodesk Product Design Suite Ultimate 2018 Autocad 2018, Inventor Pro 2018 (personal licensed copy) . Johannesburg, South Africa

I am a self-motivated freelance product designer, currently studying Engineering at the University of Pretoria, with experience in Fusion 360 and Solidworks. I will admit, I do not know everything... Read more

I am a self-motivated freelance product designer, currently studying Engineering at the University of Pretoria, with experience in Fusion 360 and Solidworks. I will admit, I do not know everything there is to know about Fusion 360 or Solidworks. There is always something new to learn. When opportunity doesn't knock, build a door!

I am a CNC programmer and toolmaker with a passion for design and development. My expertise are mainly product design and development, tool or mould design and manufacturing of the tooling for... Read more

I am a CNC programmer and toolmaker with a passion for design and development. My expertise are mainly product design and development, tool or mould design and manufacturing of the tooling for production.

I am a qualified Mechanical Engineering Technician, I have a combined work experience of more than 4 (four) years in both the FMCG/ Food and Beverage and Steel manufacturing industry. My areas... Read more

I am a qualified Mechanical Engineering Technician, I have a combined work experience of more than 4 (four) years in both the FMCG/ Food and Beverage and Steel manufacturing industry. My areas of expertise are specifically in Project Management, Systems and product design, General mechanical engineering and 2D draughting. I have worked on projects ranging up to ZAR 90 000 in value and have managed to design, impliments and successfully commission 3 new system projects in 1 years, reducing operational costs by up to 20%.

The company was started in 1996 by BP Nel, a graduate mechanical engineer. We have since complete more than a 1000 projects in a very diverse field of design for manufacture. Our experience are... Read more

The company was started in 1996 by BP Nel, a graduate mechanical engineer. We have since complete more than a 1000 projects in a very diverse field of design for manufacture. Our experience are within Product and Tool Design for plastic injection molding, vacuum forming, rotational molding, pressure die casting and blow molding. We also have extensive experience in design for metal fabrication, mechanisms, gears, cams, shafts, springs and bolted connections. We optimize machines and products with Finite Element Analysis and Generative Design. We use LEGAL software ONLY: Autodesk Inventor Professional and Fusion 360 Design software. We work with clients all over the world and communicate using ▒▒▒▒▒▒▒▒, ▒▒▒▒▒ and Zoom.

I am a mechanical engineer who studied at Stellenbosch University in South Africa. I have experience in product design in the agricultural and weapons manufacturing sector. Read more

I am a mechanical engineer who studied at Stellenbosch University in South Africa. I have experience in product design in the agricultural and weapons manufacturing sector.

I am a senior mechanical engineering product designer, specialist in 3D CAD design and FEA of sheet metal and heavy steel fabrication with 16 years of experience. I am passionate about CAD design... Read more

I am a senior mechanical engineering product designer, specialist in 3D CAD design and FEA of sheet metal and heavy steel fabrication with 16 years of experience. I am passionate about CAD design and analysis, with strong focus on technical documentation and drawing detail accuracy. This includes 3D and 2D fabrication and assembly drawings in Solid Works, Creo (including Windchill) and Inventor (including Vault) as well as considerable FEA experience (Including ANSYS non-linear). I have designed a wide variety of product across many sub disciplines of mechanical engineering (Structures, driveline, suspension, hydraulics, composites… etc.). I have successfully taken many complex projects from concept to production, often reducing complexity and yielding significant cost savings all while complying with the relevant international standards.

Product designer, love challenges. I constantly think design when I am at work or at home. I love improving products or designing new products especially if they make a difference. Read more

Product designer, love challenges. I constantly think design when I am at work or at home. I love improving products or designing new products especially if they make a difference.

I am a young Mechanical Engineer with a passion for engineering design. Through a number of academic and personal design projects, I have gained and applied good technical experience in areas such... Read more

I am a young Mechanical Engineer with a passion for engineering design. Through a number of academic and personal design projects, I have gained and applied good technical experience in areas such as mechanism design, systems engineering, control systems, engineering management, product design, mechatronic design, and environmental engineering. I am excited to use the knowledge that I have gained in solving real-world problems. Although I design medical devices for the growing South African healthcare sector, I wish to improve the skills that I don't use as much in this profession. This means staying sharp with tools such as CAD (Autodesk Inventor), Scientific Computing (Matlab & Python), and Design for Additive Manufacturing (Inventor & Cura)

I have 20 years experience in CAD design, using several CAD packages on a regular basis (Autodesk Inventor, AutoCAD Mech, Solidworks, Catia V5). Project experience includes: Automotive body shop... Read more

I have 20 years experience in CAD design, using several CAD packages on a regular basis (Autodesk Inventor, AutoCAD Mech, Solidworks, Catia V5). Project experience includes: Automotive body shop equipment design, automation machinery for automotive industry, special purpose machinery, agricultural machinery, detailed surface modeling, layout drawings, consumer goods product design, foundry tooling design, machininig jig and fixture design and many more My company, Viz-Mec design, has been in operation since 2008, and we have serviced many clients in the mechanical engineering space. I provide a full design service from concept stage all the way through to detail manufacturing drawings, bills of material and operation manuals. From small one off part designs and detailing to larger projects including complete machine design.

I am an Industrial Designer. My expertise are in designing and developing new and innovative products. I am able to develop products from the initial idea, through the design process to a finished... Read more

I am an Industrial Designer. My expertise are in designing and developing new and innovative products. I am able to develop products from the initial idea, through the design process to a finished manufacturable design

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual... Read more

Jomar is a Product Designer who resides in Cape Town, South Africa. He achieved first place in the PPC Imginarium 2019 Product Design Category. His work was exhibited at the Association for Visual Arts Gallery (AVA) in Cape Town as well as at the University of Johannesburg Art Gallery, in addition to featuring in the Visi Magazine.

Hi there, My name is Kesavan Chetty. I am currently working as Draughtpersons for an engineering company in South Africa that manufacturer Saturated Diving systems that are being built in Dubai &... Read more

Hi there, My name is Kesavan Chetty. I am currently working as Draughtpersons for an engineering company in South Africa that manufacturer Saturated Diving systems that are being built in Dubai & India. I am currently trying to step out of this field and start freelancing as draughtsperson fulltime. So I am able to assist and help companies around the world with design and draughting remotely. My ideal goal is not to remain stationery but gain experience all over the world in the industrial of design and draughting. I am also currently furthering skills in product designing & architectural renderings. I am looking forward and it will be a pleasure and privilege if you choose as a draughtperson to work on your projects.

I am an Experienced Product Design Engineer, skilled in working with both established companies and startups. My passion lies in creating functional, visually appealing products that solve... Read more

I am an Experienced Product Design Engineer, skilled in working with both established companies and startups. My passion lies in creating functional, visually appealing products that solve real-world problems. Drawing on my strong engineering background and experience in user experience and prototyping, I specialize in transforming innovative concepts into practical, cost-effective designs. My portfolio includes a diverse array of products that have been successfully developed and sold by reputable organizations, as well as through numerous thriving Kickstarter campaigns. My expertise in product design spans multiple industries, from consumer electronics and medical devices to outdoor equipment. I am confident in my ability to tackle complex design challenges and adept at bringing them to fruition as market-ready products. I am excited about the opportunity to collaborate with your team and leverage my design skills and problem-solving abilities to create something exceptional together. Skills and Software: ✅ 3D CAD Modeling ( Solidworks, Autodesk Fusion 360, Blender, Creo). ✅ 3D Product Design ( 3D Design, Concept Design, Prototyping, 3D printing) ✅ Design For 3D printing ✅ Design For Manufacturing. ✅ Injection Molding part designs. ✅ CNC DXF Files ✅ 2D Technical Drawings. ✅ 3D Rendering and Animation (keyshot).