Hire the best freelance CADWorx P&ID expert designers for your company

Autocad designer since 1988, certified Autocad Professional. Piping designer, commercial kitchen designer, ASME vessels, sub-sea flow Ines, 2D/3D designer. Read more

Autocad designer since 1988, certified Autocad Professional. Piping designer, commercial kitchen designer, ASME vessels, sub-sea flow Ines, 2D/3D designer.

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project... Read more

I have 10 years of professional experience as a plant design engineer in chemical process industry. During my carrier I have involved more than 10 chemical facility construction projects as a project engineer. These projects enabled me to gain experience in these areas: -Mechanical Design of Industrial Plants (Chemical, oil & gas, power, food, pharmaceutical, cosmetics) -Preparing PFD P&ID Drawings -3D Pipeline Design (ASME B31.1, ASME B31.3) -Pipe Stress Analysis (ASME B31.1, ASME B31.3, Metal, FRP and GRP piping) -Static Equipment/Process Equipment Design (chemical reactors, mixing tanks, heat exchangers, etc.) -Pressure Vessel Design (ASME Section VIII, EN 13445, AD 2000 - AD Merkblätter, PD 5500, CODAP) -Storage Tank Design (Oil & Gas, solvent, acid, underground and aboveground) (API 620, API 650, API 653, EN 12285-1, EN 12285-2) I want to combine my experience and my ability in design to provide the highest quality service for my clients.

Hello, my name is Gabriel, I am 26 years old and a Mechanical Technician with 10 years of experience in Mechanical Drafting. I have been in this field since I was 16, continually enhancing my skills.... Read more

Hello, my name is Gabriel, I am 26 years old and a Mechanical Technician with 10 years of experience in Mechanical Drafting. I have been in this field since I was 16, continually enhancing my skills. Currently, I specialize in detailing floor plans, support structures, and 3D piping, among other tasks. I hold a Bachelor's degree in Mechanical Engineering from Furb, where I gained strong theoretical and practical knowledge. In my daily routine, I constantly seek to improve my skills through professional courses focused on engineering. I also have basic knowledge of English and IT skills that complement my professional profile. I am dedicated to delivering precise and high-quality results, utilizing my technical expertise and passion for mechanical engineering

I'm a Lead Piping Designer/Drafter with over 10 years of experience in oil and gas industry. I've been working in Canada throughout all my career. If anyone need PFD, P&ID, Plot Plan, 3D modelling... Read more

I'm a Lead Piping Designer/Drafter with over 10 years of experience in oil and gas industry. I've been working in Canada throughout all my career. If anyone need PFD, P&ID, Plot Plan, 3D modelling Piping/Structural, ISO, G.A. drawings that need to be done at a low cost and good quality then please email me. I also have a team of engineer drafters that are in Asia that will help you to finish the job at a very very low cost. I Have over 10 years of experience in AutoCad, Cadworx Plant, Cadworx Equipment, and Cadworx. P&ID.

I am providing as individual Engineering Cad, Design & Drafting services include large range 2D & 3D CAD drafting, paper to CAD conversion, raster to vector conversion for engineering drawings (civil,... Read more

I am providing as individual Engineering Cad, Design & Drafting services include large range 2D & 3D CAD drafting, paper to CAD conversion, raster to vector conversion for engineering drawings (civil, structural, mechanical, electrical, piping & instrumentation), architectural and facility drawings (floor plans, section & elevation plans, 3D modeling and rendering), contour maps, ground cadaster plans and Utility distribution networks maps for electric, gas, water, sewage and telecom. CAD Application Available 1. AutoCAD 2d & 3d 2. Revit BIM (Architecture, MEP & Structure) 3. Plant 3d Design (Process Plant Design & Piping) 4. Intergraph Cadworx (Process Plant Design & Piping) 5. Solidworks (Products & Parts Design) 6. 3d Studio Max (Interior Design) Regards Freelance CAD Designer and Draftsman mumairali90 (at) ▒▒▒▒▒▒▒ (dot) com ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ : + 9 2 3 1 5 4 2 9 9 3 8 4 ▒▒▒▒▒▒▒▒▒ : umair.ali400

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direc... Read more

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direct reduction plants, slurry transportation, cryogenic piping, etc.) and oil & gas projects (refineries, oil fields). Developed competences in most important piping codes (including ASME B31.1, ASME B31.3, EN-13480, etc.), and acquired proficiency in all aspects of static and dynamic pipe stress analyses (seismic, PSV transients, water hammer, harmonic vibrations, high-frequency vibrations, etc.) including generating critical line list, preliminary route studies and equipment arrangements, building load cases to satisfy code requirements, support design and analysis and fatigue assessments. In-depth knowledge of piping layout design using 3D software. In addition to pipe stress analysis and piping design, which is the primary field of expertise, during the work at the University of Belgrade (as PhD candidate), developed skills in pressure vessel analysis (ASME VIII-1, ASME VIII-2 and EN-13445), process equipment sizing, process design and optimization, heat and mass transfer calculations, fluid flow calculations (steady state and transient, including interaction with the stress analysis), CFD calculations, programming as well as advanced measurement and research techniques which has all proven extremely valuable in the practice. First author and co-author of several engineering and scientific research papers.

I am currently in college working on the first 2 years of an Electrical Engineering degree. I worked in at an offshore O&G engineering firm for a year as a Electrical Engineering Intern working on bil... Read more

I am currently in college working on the first 2 years of an Electrical Engineering degree. I worked in at an offshore O&G engineering firm for a year as a Electrical Engineering Intern working on billable projects with the lead electrical engineer, drafting most of the schematics and modeling the cable trays into a 3D model of a jack-up drilling rig. In high school I took two CAD drafting classes from which I learned to use AutoCAD. I also worked for Process Plant Design converting drawings to PDF to make a set of drawing catalogs consisting of 1600+ drawings dating back to 2000. I am a Sea Scout; Sea Scouts are a Co-ed division of the Boy Scouts of America. I completed my Quartermaster rank November 14, 2016 , which is the equivalent to the Boy Scout Eagle. Completed National Youth Leadership Training, offered by the Boy Scouts of America. Served as Boatswain for Ship 1996 (the youth leader) from January 1, 2013 to December 31, 2014. Registered BSA Lifeguard, from January 2013 to present. Teaching Boy Scouts to swim, the Swimming Merit Badge and administrating the swim test. Was staff at Wood Badge on November 22, 2013, a program that teaches adult volunteers how to be better leaders. Received the Venturing Leadership Award in August 2014. On September 21, 2016 I was honored with the rank of SHAC (Sam Houston Area Council) Fleet Boatswain. The Fleet Boatswain is entrusted to provide youth leadership to 300 Sea Scouts, around 20 ships.

Experienced designer with nearly 15 years experience. I’m looking to freelance as a way to supplement my income. Currently am working in industrial design. Main focus is piping layout design, also wit... Read more

Experienced designer with nearly 15 years experience. I’m looking to freelance as a way to supplement my income. Currently am working in industrial design. Main focus is piping layout design, also with experience in civil/structural, mechanical, and plant/site layout. Strong skills in 2D and 3D.

 From basic floor plans to complex 3D building models, I have the skills and talent to produce what you need.  Over 16 years of CAD experience in the Residential Building, Gas & Oil and gen... Read more

 From basic floor plans to complex 3D building models, I have the skills and talent to produce what you need.  Over 16 years of CAD experience in the Residential Building, Gas & Oil and general 3D modeling sectors.  Engineering Graphics Technology CAD course completed at Red Rocks Community College.  Bachelor of Arts degree from BIOLA University.  President/Owner of Alpine Design currently. www.AlpineDesignDrafting.com  Familiar with: project setups, coordinating XREF models, residential, general construction and piping specifications, naming conventions, as well as ANSI and ASME industry standards.  Willing and motivated to learn new techniques, software and/or industry and/or company standards.  Attention to detail, fast, reliable, honest, hard-working, strong analytical problem-solving.  Great professional people-skills, able to communicate and cooperatively work effectively w/other members of project team, strong verbal and written skills, quick learner, flexible, positive outlook.  Create 3D Residential building models, piping and equipment models.  Produce high-quality and accurate: Site Plans, equipment location plans, plan and section construction drawings, including PFDs and P&IDs, Equipment Schedules of materials.  Piping/Design fabrication of upstream & mid-stream oil & gas.

(12) years experience in piping design and drafting for,chemical ,fertilizer (Crystallization,evaporation and ammunium nitrate unite),Cement works,Oil & Gas and Petrochemical industries,. Conceptual... Read more

(12) years experience in piping design and drafting for,chemical ,fertilizer (Crystallization,evaporation and ammunium nitrate unite),Cement works,Oil & Gas and Petrochemical industries,. Conceptual plant layout from preliminary documents such as PFD’s, geological plans, preliminary vendor data to produce a 3D cadworx based model showing major equipment, structures, modules and main pipe routes and access volumes • Experience with EPC Company in detailed design and drafting. - The production of mechanical and piping drawings associated with turn-key wood fuelled boiler installations, ducting and district heating systems and heat pumps systems including: - 2D Plantroom Layouts & Sections - 2D Pipework & piping Service Layouts - Mechanical & piping Schematics • Piping layout, plot plans, equipment arrangement with piping flexibility. • Perform squad check of vendor equipment drawings and other discipline drawings. •CAD software like AutoPlant V8i (expert), AutoCAD & CADWorx. • Applies design standards and principles in compliance with all applicable Codes and Specifications such as API, ASME, ANSI, etc. my ▒▒▒▒▒▒▒▒▒▒▒▒:▒▒▒▒▒▒▒▒▒▒▒▒

Work as a designer & draftsperson in 3D & 2D for electrical, civil, piping, mechanics with the following software: AutoCAD, Microstation, Cadworx, and Solidworks, 3DMax Read more

Work as a designer & draftsperson in 3D & 2D for electrical, civil, piping, mechanics with the following software: AutoCAD, Microstation, Cadworx, and Solidworks, 3DMax

I take pride in all my work by ensuring the client's needs and visions are met and correctly captured. I provide very quick turnarounds on all drawings without sacrificing the quality. My extreme atte... Read more

I take pride in all my work by ensuring the client's needs and visions are met and correctly captured. I provide very quick turnarounds on all drawings without sacrificing the quality. My extreme attention to detail and ability to efficiently use drafting software allows me to provide accurate and clean drawings to ally clients.

I'm alvin jasmin from the philippines, has over 7 years of working experience in autocad drafting and 3d modelling/rendering as well. Involve in a multi national engineering projects. Familiallrize in... Read more

I'm alvin jasmin from the philippines, has over 7 years of working experience in autocad drafting and 3d modelling/rendering as well. Involve in a multi national engineering projects. Familiallrize in architectural/civil, piping and mechanical drawings.

Cadworx Plant user with 3D analysis design experience. Read more

Cadworx Plant user with 3D analysis design experience.

I am a Mechanical Engineer with 5 years of experienced working as a Piping Engineer under the No.1 Plant Piping and Layout Department at Mitsubishi Heavy Industries Ltd., both in the Philippines and i... Read more

I am a Mechanical Engineer with 5 years of experienced working as a Piping Engineer under the No.1 Plant Piping and Layout Department at Mitsubishi Heavy Industries Ltd., both in the Philippines and in Japan, where I designed and showcased various power plant equipment for the use of O&M manuals, Pipe Detailing and 3D Piping Design. When I migrated in Canada I worked as a Piping Designer for an EPCM company for more than 3 1/2 years, wherein, I accomplished a lot of As-Built, 3D Piping and Layout, and Pipe Detailing for various Oil & Gas companies. My passion to Mechanical design and 3D modeling led me to further my study in AutoCAD, way back 2002 and since then, I keep on upgrading my skills.