Hire the best freelance electrical cabinet design expert designers for your company

I am an electrical engineer with over 10 years of experience in industrial automation and controls. I have worked onsite in multiple manufacturing facilities and with system integrators. I am experien... Read more

I am an electrical engineer with over 10 years of experience in industrial automation and controls. I have worked onsite in multiple manufacturing facilities and with system integrators. I am experienced with many different plc platforms and in electrical schematic and panel design.

I'm using AutoCAD in creating electrical drafting for more than 5 years as part of my primary task as a project and maintenance supervisor in my previous job on a Food and beverage manufacturing plant... Read more

I'm using AutoCAD in creating electrical drafting for more than 5 years as part of my primary task as a project and maintenance supervisor in my previous job on a Food and beverage manufacturing plant. The 2D design has been my forte since I start drafting floor plans, electrical layouts (lighting & power), Single line, schematics, and riser diagrams. As an experienced draftsman, I am already familiar with most tools in AutoCAD, which increases my speed in drafting and finishing the work on time. For 3D modeling I use SolidWorks in creating lighting fixtures support, manhole cover and Utility box intended for fabrication and visualization of the part or unit.

I am an Electrical Engineer who is conversant with all aspects of consultancy works associated with Electrical Services installations including lighting design, small power, raw power and clean power... Read more

I am an Electrical Engineer who is conversant with all aspects of consultancy works associated with Electrical Services installations including lighting design, small power, raw power and clean power installations. Low and Medium Voltage switchgear design and installation, fire alarm detection, structured cabling and security installations. Generator back up design and installation, lifts and escalator installations. This also involves Feasibility Studies and Reports, Planning Proposals, Cost Estimates, Detailed Electrical Services Project Design, Specifications and Bills of Quantities, Contract Management and Cost Control, Preparation and Settlement of Interim and Final Contract Accounts, Site Supervision, Commissioning and Advice on Operation of Plant, Provision of Record Plans, and Maintenance Programmes. Accomplishments • Conducted site assessments of electrical components and • Obtained clients' detailed briefs through collaboration with project managers and architects. • Coordinated project planning and design reviews of Electrical Engineering Works while Liaising with other consultants commissioned to support design works for construction. • Recommended sustainable and cost-effective solutions through the preparation of comprehensive and accurate Project cost Estimates, Technical Specifications and Bills of Quantities of electrical works, • Provided technical support in Tender processes, analysis and Evaluation, Reporting and award of contracts that supported the procurement team. • Spearheaded the Preparation of Interim Valuations, Variation Orders, Final Accounts, and closure documents, including snag lists for Electrical Installations. • Chaired the handover meetings in project initiation and handover stages while delegating tasks with timelines to different teams. • Supervised contractors in the project construction process, monitored site work through site visits, verified and approved material specification and quality during installations, testing and commissioning electrical services. • Executed the project closure process, handing over after the defects liability period and issued high quality related documentation such as as-built drawings, maintenance manuals and product warranties for archiving. • Ensured that all engineering work was carried out as per specifications, statutory requirements, laws, rules, regulations and other contractual requirements, with due regard to safety, operability and maintainability. Key Achievements • Implemented more than 20 energy efficient projects successfully spanning industrial buildings, housing schemes, high-rise office buildings, hospitals, hotels and educational institutions. • Delivered projects worth more than Kshs 40 million in electrical installations project cost. • Addressed simple and complex issues that emerge during a project cycle through work coordination and finding alternative solutions to engineering problems. • Performed value engineering in projects to lower the cost of projects and meet clients’ budgets. • Executed super-quality projects within desired timelines bringing satisfaction to clients.

- More than 15 years of experience - Management of Technical Documentation - Drawing all kind of electrical and industrial drawings Read more

- More than 15 years of experience - Management of Technical Documentation - Drawing all kind of electrical and industrial drawings

• Total experience of 10 years in the field of Mechanical Product Design engineering. • Experience in various domain NPD, SPM, FVM, Automotive, HVAC, Sheet metal, Value Analysis Value Engineering (VAV... Read more

• Total experience of 10 years in the field of Mechanical Product Design engineering. • Experience in various domain NPD, SPM, FVM, Automotive, HVAC, Sheet metal, Value Analysis Value Engineering (VAVE),Tear-down, Electromechanical. • Experience in Sheet metal Design & Plastic component design. • Experience in Creo, Windchill, SAP,Catia V5,Teamcenter,Autodesk Inventor,Solid-works,Uni-graphics. • Strong communication,Team player problems solving nature,positive attitude and leading teams. • Handled team of around 10 people which includes Design team,Manufactruing team & Sales team. • Worked on sales to build coustomer for organization.

Electrical Design Expert EPLAN Electrical: Proficiency Level: 9/10 SEE Electrical: Proficiency Level 9/10 Read more

Electrical Design Expert EPLAN Electrical: Proficiency Level: 9/10 SEE Electrical: Proficiency Level 9/10

I am an experienced Electrical Design Engineer having Experience more than 10 years with a strong background in power systems, circuit design, and CAD modeling. Over the years, I have successfully dev... Read more

I am an experienced Electrical Design Engineer having Experience more than 10 years with a strong background in power systems, circuit design, and CAD modeling. Over the years, I have successfully developed electrical solutions for residential, commercial, and industrial projects, ensuring they meet both functional needs and regulatory standards. My skill set includes: Expertise in designing efficient, safe, and reliable electrical systems, from concept to detailed schematics. CAD Modeling & Drafting: Proficient in AutoCAD Performing detailed load calculations, cable sizing, and selecting components to optimize performance and safety With a commitment to precision and client satisfaction, I provide designs that integrate smoothly into projects and minimize future maintenance. Whether you need support for a single task or an entire project lifecycle, I’m here to help bring your ideas to life with reliability and quality. Let’s discuss how I can support your project needs today

Experienced Electrical Engineer with a BSc in Electrical and Electronic Engineering (EEE) and a Diploma in Electrical Engineering. Over 3+ years of hands-on experience in various electrical design asp... Read more

Experienced Electrical Engineer with a BSc in Electrical and Electronic Engineering (EEE) and a Diploma in Electrical Engineering. Over 3+ years of hands-on experience in various electrical design aspects, including Single Line Diagrams, Lightning Protection Systems, Load calculations, and CAD drafting. Proven track record of managing and executing projects with a focus on efficiency and safety. Strong leadership and team-building skills to lead projects to successful completion. Committed to delivering high-quality electrical solutions to clients.

Shahzaib Rehman | Electrical Engineer & CAD Specialist With 7+ years of experience as an Electrical Engineer, I specialize in providing expert consultation and design services for Electrical Drawings... Read more

Shahzaib Rehman | Electrical Engineer & CAD Specialist With 7+ years of experience as an Electrical Engineer, I specialize in providing expert consultation and design services for Electrical Drawings and AutoCAD Electrical projects. My strengths include precise electrical schematics, SOLIDWORKS designs, and customized CAD solutions for mechanical and electrical systems. I’ve led and completed a wide range of projects, from electrical designs for carwashes and UL-compliant solar assembly kits to complex metering switchboard designs. I’m also the founder of SR CAD Works, offering top-tier CAD services for industrial and commercial projects. Let’s work together to bring your project to life!

7+ Years of working experience in the Maintenance & Service Field. 3 Years of working experience in the Electrical Design & Drafting Field. Read more

7+ Years of working experience in the Maintenance & Service Field. 3 Years of working experience in the Electrical Design & Drafting Field.

- Experienced Electrical Designer - Competent in the use of 2D AutoCAD for electrical deliverables such as: -- Single Line Diagrams -- Schematics/Wiring Diagrams -- Electrical Equipment Layouts -- Cab... Read more

- Experienced Electrical Designer - Competent in the use of 2D AutoCAD for electrical deliverables such as: -- Single Line Diagrams -- Schematics/Wiring Diagrams -- Electrical Equipment Layouts -- Cable Routes -- Tray Routes

I have 8 years of experience as an Eplan electrical design engineer(LV & HV Control panel designing). Previously I worked as an Eplan designer for the Marel group situated in Netherland(outsourcing... Read more

I have 8 years of experience as an Eplan electrical design engineer(LV & HV Control panel designing). Previously I worked as an Eplan designer for the Marel group situated in Netherland(outsourcing work from India) & some other industries of Extruder machinery, Textile machinery,Filling & packaging machinery. I have depth experience in switchgear Siemens, Danfoss & Sew drives(Profinet & profibus & hardwire FC),ABB,YASKAWA,Schneider,Sick & Leuze sensors,Phoenix contact,FLM & Balluf IO link,Pilz safety,B&R PLC,Rittal switch cabinets with it switchgear,Sew & Seimens servo drives. Siemens CPU S7 1500 TIA to 300series,distributed i/o ET200SP.Also work on Main distribution board & Network cabinet. I have also working experience to generate bill of material in SAP system.

* Good design experience in AutoCAD & Solidworks * Project Undergone : Transformer & Voltage regulators cabinet designing & other products like Electrical panels, drives, welding machine Etc..,... Read more

* Good design experience in AutoCAD & Solidworks * Project Undergone : Transformer & Voltage regulators cabinet designing & other products like Electrical panels, drives, welding machine Etc.., : Textile machine mechanical parts, assembly & operation.

AlphaCADD located at Chennai, India is a registered Engineering services company, founded by 15+ years design and development experienced Engineer in 2012. In a short span, AlphaCADD started providing... Read more

AlphaCADD located at Chennai, India is a registered Engineering services company, founded by 15+ years design and development experienced Engineer in 2012. In a short span, AlphaCADD started providing engineering services and support to 5 major clients by extremely perceiving the customer requirements and output back as cost-effective solution. We provide complete project life cycle support which includes Concept Design Engineering Analysis 3D modelling & 2D Detailing PDM & PLM activities ECN/ECR/ECO creation Prototype development Testing Post project support & Closure AlphaCADD able to provide Engineering services and support on most industry sectors by the application of expertise applied by pool of professionals from various engineering background and experience. Automotive Design Heavy Engineering HVAC and Architectural Special purpose machine design Electrical Panels & Cabinet design Industrial design using surface & Solid modelling

Experience in 3D/2D designing for more than 3 years. Proficiency in Solidworks, Catia, AutoCAD tools. Read more

Experience in 3D/2D designing for more than 3 years. Proficiency in Solidworks, Catia, AutoCAD tools.

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road... Read more

Hello! My name is Michal Panus and I am qualified Automation and Robotics Engineer with previous experience in maintenance, servicing and installation of production machines. I have started my road to become engineer during my studies at Warsaw University of Technology, faculty of Mechatronics. Studies in Poland are not very practical and I always believed that technical experience is priceless for someone who want to become a professional, and most of all, good engineer so I have decided to start work as a Multi Skilled Maintenance Engineer at MPack where I was responsible for electrical and mechanical maintenance of plant machinery. In September 2011 I have progressed to Service Engineer i SZUGAJEW AGRI. As a service Engineer I was responsible for installation of automated lines for grading and packaging of vegetables and fruits. That job involved working with engineering drawings, electrical and mechanical assembly, start ups and running tests of all the installed machines. After that I have started work for CNS Soultions where I have become expert in using Solid Works 3D and Solid Works Electrical. Since I moved to UK on 7th of January 2015 I have started to work as multi skilled designee engineer. My First Engineering job in UK was in IONEX SG where I was responsible for designing container water treatment installation to remove nitrates from drinking water. (Contract - making drawings of 3D assemblies and part models, 2D documentation, pneumatic installations, selecting components, electrical routing, support project from the beginning to the end) Next, I have started working as electro-mechanical engineer in OPTEK SYSTEMS where I was responsible for designing of specialized laser cutting machinery. (Permanent - full electrical design, making drawings of 3D assemblies and part models, 2D documentation, designing safety systems for laboratories, redesigning of the existing laboratories, engineering support for wire man work, start up of machinery, etc. - 3.5 years) Currently for more than 1 year I am on contract in RACE (Remote Applications in Challenging Environment) United Kingdom Atomic Energy Authority where I am working as System Engineer. I am responsible for designing of Safety Systems, LV distribution, supporting of electrical control design, cable tray layouts drawings, cabinet layouts drawing, etc. Curently I am working as a contractor and my contract is 37.5h/ week I am managing to finish my hours in 3.5 days a week so I have a lot of free time now. That is why I have decided to joint that site and look for more opportunities to use time more effective. I hope someone will be interested in my personal skills. Best Regards Michal Panus

PROFILE AND OBJECTIVES Mechanical-electrical engineer of Exact Sciences and Engineering University Center (CUCEI), Universidad de Guadalajara, final average 95.7/100. With high degree of compromise... Read more

PROFILE AND OBJECTIVES Mechanical-electrical engineer of Exact Sciences and Engineering University Center (CUCEI), Universidad de Guadalajara, final average 95.7/100. With high degree of compromise and responsibility, honest and frank. Showing desire and continuous search of learning in his study field, complementary disciplines, as well as in focus knowledge of mechanical design prioritizing the functionality, but without neglect the sustainability and esthetics of the design. Strengthening and deepening of his interest knowledge, acquisition of new skills that facilitate his active participation in application projects, with the purpose is to offer solutions in automation, transport and/or energy. He would like to work in research, development and application of technologies and methodologies, focused on social problems satisfaction, both daily and general, contemplating the proper handling of natural resources from an holistic point of view. WORK EXPERIENCE Since March/2017 to the present Place: Sistema BEA, company that offer solutions for urban and suburban transport Job: Industrial and mechanical design engineer Since February/2016 to September/2016 Place: University of Guadalajara, CUCEI, Electronic and Computation Department Job: Social service provider in mechanical area

Hello there! Greetings! I am a high-performing, dedicated, hardworking, productive, and enthusiastic professional boasting over a decade of experience as a CAD Draftsman. My track record showcases an... Read more

Hello there! Greetings! I am a high-performing, dedicated, hardworking, productive, and enthusiastic professional boasting over a decade of experience as a CAD Draftsman. My track record showcases an unwavering ability to excel even in challenging circumstances, consistently delivering services of the highest standards to clients. My expertise encompasses a wide array of technical areas, including: 1. **Shop Drawings:** - Aluminium Window & Door Facade Drawings - Woodworks - Furniture - Kitchen Cabinet 2. **Mechanical & Piping Drawings:** - Process & Flow Diagram - Piping and Instrumentation Diagram - Hydraulic Flow Diagram - Site Piping Layout - Piping General Arrangement Layout - Plant Equipment Arrangement Layout - HVAC 3. **Electrical Drawings:** - Single Line Diagram - Three Line Diagram - Wiring/Interconnection Diagram - MCC Drawing - Power, Control, and Instrumentation Cable Raceway Layout - Cable Tray, Cable Trench, & Cable Trunking Layout - Instrumentation Hook-up Layout - PLC Wiring Diagram 4. **Fabrication Drawings:** - Vessel - Pump - Tank 5. **3D Modeling & Rendering** My journey has been one of continuous learning, growth, and innovation. I thrive on challenges and relish opportunities to create efficient and impactful solutions. Through my extensive experience, I have honed not only my technical skills but also my ability to collaborate and communicate effectively with cross-functional teams. If you are seeking a seasoned CAD Draftsman with a proven track record and a passion for staying ahead in a dynamic field, I'm here to contribute and excel. Let's connect and explore how my expertise can add value to your projects. Thank you for considering my profile. Warm regards, Alihasan Batuampar

To work in a vibrant environment, learn new technologies and give my best. Seeking a challenging career in the industry, that provides ample opportunity for amassing rich experience and technical proc... Read more

To work in a vibrant environment, learn new technologies and give my best. Seeking a challenging career in the industry, that provides ample opportunity for amassing rich experience and technical process to become an indispensable asset to the organization.

Design engineer, highly skilled in CAD modeling and rendering, primarily for future manufacturing, or representation of real life products. Industrial designer (as long as you also like highly functio... Read more

Design engineer, highly skilled in CAD modeling and rendering, primarily for future manufacturing, or representation of real life products. Industrial designer (as long as you also like highly function driven design, I am really good at it). Full-time freelancer. Experience of 5 years in the machine building sphere. One year as a Machining Process Engineer, and 4 years as a Mechanical Design Engineer, creating heaps of models, drawings and 3d renders, highlights of which can be found lower on this page in a portfolio section. Proficiencies (I can do everything associated with this): • 3D CAD Models (NURBS/B-Rep) • Static renders • Animations • Shop drawings • FEA, CFD simulations Software I'm proficient in: • Fusion 360 • Solidworks • Inventor • AutoCad • Keyshot • Ansys

I am a junior architect with a strong proficiency in 3D visualization software, making them a valuable asset in architectural design and project visualization. With a passion for creating detailed and... Read more

I am a junior architect with a strong proficiency in 3D visualization software, making them a valuable asset in architectural design and project visualization. With a passion for creating detailed and realistic renderings, I excel in transforming conceptual designs into compelling visual representations. Skillset: 3D Visualization Software: Expert in using industry-standard software such as Autodesk 3ds Max, V-Ray, Enscape, SketchUp, for creating detailed and photorealistic architectural renderings. Architectural Design: Strong foundation in architectural principles, design concepts, and space planning, enabling the creation of functional and aesthetically pleasing designs. Rendering and Animation: Skilled in producing high-quality renderings and animations that effectively communicate design ideas and concepts to clients and stakeholders. Interior Design: Proficient in designing interior spaces, with a keen eye for detail and a focus on creating harmonious and functional environments. CAD Software: Experienced in using AutoCAD and Revit for drafting and modeling, ensuring precision and accuracy in technical drawings. Material and Lighting: Expertise in applying materials and lighting to enhance the realism and visual appeal of 3D models. Project Collaboration: Effective team player with experience in collaborating with architects, designers, and engineers to achieve project goals. Sustainable Design: Knowledgeable in sustainable design practices and materials, integrating eco-friendly solutions into architectural projects. Presentation Skills: Strong ability to present and communicate design concepts clearly and effectively through visual and verbal means. Problem Solving: Excellent problem-solving skills, capable of addressing design challenges and finding innovative solutions.

I'm a skilled draftsman and designer for architects that develops at turning 2D concepts into realistic looking 3D models and detailed construction drawings. I'm skilled with drafting software and hav... Read more

I'm a skilled draftsman and designer for architects that develops at turning 2D concepts into realistic looking 3D models and detailed construction drawings. I'm skilled with drafting software and have a gift for concept visualization in addition strong work ethic. my Major achievements include the ability to convert a large number of designs into 3D renderings, the regular delivery of excellent projects on schedule, and the development of rewarding client relationships. My educational background includes [Associate Civil Engineer /training], which has given me a strong foundation in the concepts and methods of architecture.

I am Abuobeda Yahya, a graduate of mechanical engineering, production, working on Solidworks design I have the ability to be patient, learn and acquire new skills Read more

I am Abuobeda Yahya, a graduate of mechanical engineering, production, working on Solidworks design I have the ability to be patient, learn and acquire new skills

A professional Mechanical Engineer with a skill set of All 2D and 3D modelling softwares like Autocad, ProE ,NX-CAD, Catia, Creo and Solidworks. Read more

A professional Mechanical Engineer with a skill set of All 2D and 3D modelling softwares like Autocad, ProE ,NX-CAD, Catia, Creo and Solidworks.

Hi. My name is Shivraj and I will be pleased to work with you. Please provide thorough description of the desired model and which file format should it be. I use 3d Studio Max. I am 3d model... Read more

Hi. My name is Shivraj and I will be pleased to work with you. Please provide thorough description of the desired model and which file format should it be. I use 3d Studio Max. I am 3d modeller with 3 years experience in 3d modelling and rendering. Fast, professional creation of any of your possible ideas. I will convert your conceptual designs ,sketches or ideas into a 3d model. My goal is to upgrade these skills and make some money in the process. Perfectionist, hard worker and I enjoy what I do! Contact me if you have any questions Guaranteed quality and creativity to perfection in accordance with your needs. I'm always online, so fell free to contact me and get the job done. I want to combine my ability in designing with my creativity to provide the highest quality service for my clients. Please reach out with any questions or oportunities. My website - shivrajrudruke.ml

Hello, I am an Experienced Product Designer. I convert your ideas from sketches/images to CAD Models and Assemblies. My Designs are ready to be 3D Printed and Injection Molded. My services include: PC... Read more

Hello, I am an Experienced Product Designer. I convert your ideas from sketches/images to CAD Models and Assemblies. My Designs are ready to be 3D Printed and Injection Molded. My services include: PCB Enclosure Design 3D Printing and Prototyping Consumer Products Design 2D & 3D CAD Modelling Realistic Rendering Exploded View and Simple animation.