Hire the best freelance Engineering Reports expert designers for your company

Experienced Mechanical Design Engineer skilled in CAD modeling and project management, with a proven track record in bespoke interior design, structural design, and construction management. Proficient... Read more

Experienced Mechanical Design Engineer skilled in CAD modeling and project management, with a proven track record in bespoke interior design, structural design, and construction management. Proficient in Autodesk Inventor, Revit, and skilled in project management tools, I excel in problem-solving and thrive both independently and collaboratively. Possessing strong communication skills and attention to detail, I am motivated to contribute innovative solutions to engineering challenges.

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects. Read more

Experience of working on international projects. I can help you with your FEA Projects and any CAD related projects.

As a passionate mechanical design engineer, I am driven by an unwavering enthusiasm for innovation and problem-solving within the realm of mechanical engineering. With a foundation built on creativity... Read more

As a passionate mechanical design engineer, I am driven by an unwavering enthusiasm for innovation and problem-solving within the realm of mechanical engineering. With a foundation built on creativity, technical proficiency, and attention to detail, I thrive on tackling complex challenges and transforming ideas into tangible solutions. Continuously seeking to expand my knowledge and skills, I approach each project with a dedication to excellence and a commitment to delivering impactful results. Collaborative by nature, I value the power of teamwork and effective communication in achieving shared goals. Rooted in a deep appreciation for the intersection of engineering and design, I am dedicated to creating products and systems that not only meet technical specifications but also enhance the lives of end-users and contribute to a more sustainable future. My passion for the field drives me to continuously push the boundaries of what is possible, striving to make a meaningful impact through my work

I am a BSc. qualified mechanical designer. I have a good experience in product and plant design and manufacturing planning. Well vested in CAE tools for general mechanical design, I have helped my cli... Read more

I am a BSc. qualified mechanical designer. I have a good experience in product and plant design and manufacturing planning. Well vested in CAE tools for general mechanical design, I have helped my clients cut design cost and time, and reduce the impact of design change on project execution. I develop product functional requirements and design parameters with axiomatic design principles to facilitate generation of good fit solutions right from the concept development stage. I am proficient in verifying and validating design concepts using mathematical analysis and computer-based simulations.

I am an accomplished Product Design Engineer with a robust background in mechanical engineering, specializing in CAD design, 3D modeling, and prototyping. My expertise lies in transforming concepts in... Read more

I am an accomplished Product Design Engineer with a robust background in mechanical engineering, specializing in CAD design, 3D modeling, and prototyping. My expertise lies in transforming concepts into tangible, high-quality products that meet stringent industry standards and exceed client expectations. With years of hands-on experience, I have honed my skills in creating detailed engineering drawings, developing innovative designs, and optimizing products for manufacturing, particularly in the realm of sheet metal fabrication. Strengths and Skillsets: 1. CAD Design and 3D Modeling: I have a deep proficiency in using advanced CAD software, such as SolidWorks, AutoCAD, and Fusion 360, to create precise and detailed 3D models. My designs are not just visually accurate but are also optimized for functionality and manufacturability. I can take your ideas and concepts and turn them into fully functional designs that are ready for prototyping and production. 2. Product Development: My experience spans the entire product development lifecycle, from initial concept design to final production. I excel in taking a product idea from the drawing board through to completion, ensuring that each stage is meticulously planned and executed. I work closely with clients to understand their needs and translate them into practical, efficient designs that meet all specified requirements. 3. Prototyping and Testing: I utilize 3D printing and other rapid prototyping techniques to create physical models of designs, allowing for thorough testing and iteration. This approach ensures that potential issues are identified and addressed early in the development process, resulting in a final product that is both high-quality and reliable. 4. Sheet Metal Design: My specialized knowledge in sheet metal design allows me to create parts and assemblies that are not only functional but also cost-effective and easy to manufacture. I am experienced in designing for various fabrication techniques, including bending, cutting, and welding, ensuring that the final product is robust and meets all necessary specifications. 5. Engineering Drawings and DXF Files: I produce detailed engineering drawings and DXF files that are essential for the manufacturing process. These documents are created with precision, ensuring that all necessary details are clearly communicated to the fabrication team. My drawings are compliant with industry standards and include all relevant information, such as dimensions, tolerances, and material specifications. 6. Design for Manufacturing (DFM): One of my key strengths is my ability to design products with manufacturability in mind. I focus on creating designs that are not only functional and aesthetically pleasing but also optimized for efficient manufacturing. This involves considering factors such as material selection, ease of assembly, and cost-effectiveness from the very beginning of the design process. Accomplishments: 1. Successful Product Launches: Throughout my career, I have successfully led multiple product development projects from concept to market launch. One of my notable achievements includes the development of a cutting-edge machine for Keencut, where I integrated the latest technological advancements to improve performance and user experience. This product received excellent feedback and contributed to the company's reputation for innovation. 2. Design Optimization: I have a proven track record of optimizing existing designs to enhance their performance and efficiency. For example, I redesigned a key component in an industrial machine, reducing its manufacturing cost by 15% while improving its durability and ease of assembly. This redesign was implemented across the product line, leading to significant cost savings for the company. 3. Prototyping and Testing: In one of my recent projects, I used 3D printing to prototype a complex assembly for a new product. This approach allowed for rapid testing and iteration, ultimately leading to a final design that met all functional requirements and could be produced within budget and on schedule. The successful prototyping phase was a critical factor in the project’s overall success. 4. Collaboration and Teamwork: I have worked collaboratively with cross-functional teams, including manufacturing engineers, marketing teams, and quality assurance professionals, to bring products from concept to reality. My ability to communicate effectively with different stakeholders has been instrumental in ensuring that projects are completed on time and within scope. Education and Professional Development: I hold a Bachelor's degree in Mechanical Engineering, which provided me with a solid foundation in the principles of design, mechanics, and materials science. I have continued to build on this foundation through ongoing professional development, including

Deals in Designing of Small Dams, House, Roads and Buildings On order preparation of Environmental Impact Assessment Reports, Contract / Bidding Documents, BOQ Feasibility Reports of the Project Read more

Deals in Designing of Small Dams, House, Roads and Buildings On order preparation of Environmental Impact Assessment Reports, Contract / Bidding Documents, BOQ Feasibility Reports of the Project

HVAC: 1. Utilizes a CAD to prepare HVAC design drawings CAV&VAV utilizing theoretical and practical design knowledge. Interprets and ensures conformance to standards and codes, as well as company poli... Read more

HVAC: 1. Utilizes a CAD to prepare HVAC design drawings CAV&VAV utilizing theoretical and practical design knowledge. Interprets and ensures conformance to standards and codes, as well as company policies and procedures. Understands and utilizes applicable software for load calculation. 2. Writing engineering reports. 3. Supervising and directing the site work. PLUMBING: 1. Design Engineering, analysis and quality control of process piping, chilled water systems, and plumbing. 2. Writing engineering reports. FIREFIGHTING: 1. Engineering, Design of firefighting (Industrial & Commercial) systems as NFPA standard and authority civil defense required 2. Writing engineering reports.

We at Techinical Projects (ProTec) have 5 years experience in structural engineering and we offer these services: - Towers and Silos steel design and shop drawing. - Sewage treatment plant projects.... Read more

We at Techinical Projects (ProTec) have 5 years experience in structural engineering and we offer these services: - Towers and Silos steel design and shop drawing. - Sewage treatment plant projects. - Commercial buildings and residential builngs with large square feet. - Foundations (footing) projects with reinforced concrete. - Shop Drawing production and site detailing production. - Technical reports production.

Professional Experience: Weatherford International PLC Huntsville, TX Senior Project Engineer June 2012 - Present Manage projects to ensure that activities are carried out in accordance with establ... Read more

Professional Experience: Weatherford International PLC Huntsville, TX Senior Project Engineer June 2012 - Present Manage projects to ensure that activities are carried out in accordance with established specifications, schedules, and budgets; coordinate interdepartmental functions in order to minimize delays; meet with project team members on a regular basis to review project status and plan future actions. ● Coordinate the efforts of the functional departments to ensure that projects are conducted in accordance with the Statement of Requirements and budgets; from manufacturing through production. o Reduced time to market threefold by generating efficiency through direct contact between designer and manufacturing, maintaining test schedules while simultaneously updating lab reports. o Consulted with FEA Engineer, Designer, and Machinist to enhance product design while limiting the difficulty of manufacturing the expandable connection product line. ● Interface with internal and external customers on schedules, meetings, and project status. ● Anticipate potential schedule or priority delays and initiate plans for alternative actions. ● Design and monitor manufacturing of product, fixtures and other special equipment for lab operations. o Capehart, Michael B. and Richard W. Delange, Feng Gao, Scott H. Osburn, John Richard Setterberg, Jr. “Expandable Liner.” Patent Application No. PCT/US16/42113, filed July 13, 2016. L3 Communications PID Waco, TX Structural Engineer 2B September 2008 - June 2012 Analyzed interior and exterior aircraft components that were newly designed or modified. Then, conveyed results to the design group to aid in obtaining structurally sound components per customer requirements. ● Performed stress analysis for interior and exterior aircraft components on various aeronautical programs and detailed results in a professional report format. o Performed static stress analysis on the addition of an antenna to the outer skin of aircraft fuselage. o Utilized Finite Element Analysis (FEA) to achieve optimal design for the critical clevis attachment of a 1200+ lbm to the aircraft frame. ● Proactively programmed spreadsheets to generate analysis of common parts and output results into proper report format. ● Coordinated with design groups to update parts according to results of stress analysis. ● Worked with manufacturing, purchasing and test sites to coordinate completion of test samples. o Prepared all component level test plans and report for P1009 (500+ total). o Analyzed effects of large payload attached to critically stressed components of the wingbox. Professional Honors: Engineer-In-Training (EIT 54943) “Expandable Liner”. US Patent Application No. PCT/US16/42113. 2016 July 13 Society of Petroleum Engineering American Society of Mechanical Engineers

Am a graduate in the field of Civil engineering. After I graduated, I first worked with small construction companies before I started online freelancing. I have worked with ▒▒▒▒▒▒▒ and ▒▒▒▒▒▒ where I... Read more

Am a graduate in the field of Civil engineering. After I graduated, I first worked with small construction companies before I started online freelancing. I have worked with ▒▒▒▒▒▒▒ and ▒▒▒▒▒▒ where I majored in civil engineering related task. among them were geotechnical reports, lab reports, structural design calculations, and architectural/structural drawings.

My name is Patrick Chege, am an experienced Structural Engineer with a demonstrated history of working in the civil engineering industry. I am passionate about architecture and structural engineering.... Read more

My name is Patrick Chege, am an experienced Structural Engineer with a demonstrated history of working in the civil engineering industry. I am passionate about architecture and structural engineering. Self-driven, time conscious and an excellent team player are some of my core virtues. Working as a freelancer is our new normal during this period where social distancing is paramount. It is a practice that I have come to love, given the flexibility, the diverseness that comes with it and that it pays well for the professional services offered. I am Skilled in the design of structural concrete, timber, and steel in both the BS standards and Euro-codes, with over three years of working experience both in the office and on the construction site. I use Prokon, Masterseries and Autodesk Robot to do the analysis of the structure. I use AutoCAD for drafting and detailing. The structural drawings for buildings will usually include, foundation layouts, foundation reinforcement details, floor and beam layouts, floor and beam reinforcement detail, staircase reinforcement detail, column reinforcement detail and roof layouts and reinforcement detail. Apart from structural design i can also do an electrical plan layouts. I believe in reducing our carbon emissions and safeguarding our environment and thus will usually employ passive strategies to reduce dependency on non-renewable energy. I also do architectural design. I do my design using ArchiCAD and Sketchup. The designs will usually include site layouts, floor plans, elevations, a minimum of two sections, an external plumbing plan for both storm water and grey water, and an on-site greywater treatment facility (on request). Apart from the 2D drawings I also do renders of the design in Lumion and Twin Motion and produce render images and a video walkthrough of the project. I am currently working in a leading civil and structural consulting firm in Kenya. my major responsibilities in the company are Providing civil and structural design and supervision inputs in respect to projects assigned, production of designs using AutoCAD and other computer applications as necessary, preparation and production of project reports to company standards as and when required. This is just a brief description of myself and my capabilities. I am open for any questions you might have for me about my work. You can reach me via the ▒▒▒▒▒▒ platform, i will respond as soon as i can. My time zone is UTC+3.00. Hire me today and lets get your next project done beyond your expectations. Kind Regards Patrick Chege less

Electrical engineer with experience in Conceptual Design and Project Design for Rooftop and Ground PV plants. Project manager for turnkey solar projects, preparation of BOM. More than 70 feasibility s... Read more

Electrical engineer with experience in Conceptual Design and Project Design for Rooftop and Ground PV plants. Project manager for turnkey solar projects, preparation of BOM. More than 70 feasibility studies for PV projects - from 5kW up to 10 MW. Selected projects - 10 MW Bifacial PV project, Serbia, deLAsol North Conceptual Design, Previous Feasibility Study with the General Project, development of the project until Energy Permit - 1.3 MW Rooftop PV project, Serbia, RAUCH Serbia Technical Project Manager, drawings and BOM - 594 kW Rooftop PV project, Confidential client Technical Project Manager and designer for detailed engineering phase (Conceptual Design, Project Design, drawings, calculation reports and BOM) - 305 kW Rooftop PV project, Confidential client Technical Project Manager and designer for detailed engineering phase (Conceptual Design, drawings, calculation reports and BOM)

Process & Design Engineer • Creation the 3D Mechanical models / parts • Creation the technical documents and consulting • Numerical simulations and optimization • Identify opportunities for new... Read more

Process & Design Engineer • Creation the 3D Mechanical models / parts • Creation the technical documents and consulting • Numerical simulations and optimization • Identify opportunities for new products and product improvements • Writing documents, manuals, metallurgical investigations, and reports • Manage the creation of new equipment product lines from design, development, and pilot testing Designer • 3D modeling • 3D Rendering • Photo Retouching

Capable of Designing fully labelled 2-D and 3-D CAD models and assemblies along with the required simulations of tests and making reports of the results. Read more

Capable of Designing fully labelled 2-D and 3-D CAD models and assemblies along with the required simulations of tests and making reports of the results.

I am a detail-oriented and results-driven licensed architect and structural & civil engineer with extensive experience in planning, design, and calculations for architectural, structural and civil pro... Read more

I am a detail-oriented and results-driven licensed architect and structural & civil engineer with extensive experience in planning, design, and calculations for architectural, structural and civil projects. I am a licensed in 25 states(CA, FL, TX, WA, NY, NC, SC, CO, AZ, ID, etc). Adept at providing innovative and cost-effective solutions to ensure safety, stability, and compliance with all applicable building codes and standards. Core Competencies - Architectural and Structural analysis and design for residential, commercial, and industrial projects. - Expertise in reinforced concrete, steel, timber, and masonry buildings and structures. - MEP(Mechanical, Electrical and Plumbing) and HVAC design for residential, commercial, and industrial projects. - Foundation design, including shallow and deep foundations. - Seismic and wind load analysis. - Retaining wall design and earth pressure calculations. - Integration of architectural aesthetics with structural integrity. - Proficiency in software tools such as AutoCAD, Revit, SAP2000, ETABS, and STAAD.Pro. - Preparation of permit-ready drawings and structural calculation reports. - General Site Layouts & Drafting - Retaining Wall Design - Roadway & Corridor Design - Parking lot, Sidewalks, Curb Ramps & ADA Ramps Design - Grading & Drainage Plans - Erosion & Sediment Control Plans - Storm & Sanitary Sewer Design - Creating Traffic Control & Staging Plans - Cut/Fill Calculations & Earthwork Balancing Key Responsibilities - Planning and Design: Develop comprehensive architectural and structural designs, ensuring feasibility and safety. - Calculations: Perform detailed structural calculations to determine loads, stresses, and reinforcement requirements. - Project Oversight: Review and approve architectural and structural drawings, specifications, and models to ensure accuracy and adherence to engineering principles. - Inspection and Reports: Conduct on-site inspections during construction to ensure compliance with designs and provide recommendations for any necessary modifications. - Communication: Liaise with stakeholders, including clients, contractors, and regulatory bodies, to ensure all project requirements are met effectively. Notable Projects 1. Residential Building Design: Delivered structural analysis and wood, reinforced concrete architectural design for a multi-story residential complex, including seismic detailing and wind load compliance. 2. Industrial Warehouse: Designed steel framing and foundation systems for a large-scale warehouse, ensuring stability under heavy loads and operational dynamics. 3. Retrofitting and Renovation: Spearheaded structural retrofitting of a historic building to bring it up to modern safety standards while preserving its architectural heritage. To apply my expertise in structural and architectural engineering to deliver safe, efficient, and aesthetically integrated designs for a wide range of projects, contributing to the built environment's durability and beauty.

Construction Engineer | 3D Modeling & Design | CAD & BIM Specialist I am a Construction Engineer with expertise in 3D modeling, prototype design, and residential building visualization. With strong t... Read more

Construction Engineer | 3D Modeling & Design | CAD & BIM Specialist I am a Construction Engineer with expertise in 3D modeling, prototype design, and residential building visualization. With strong technical skills in Revit, AutoCAD, and 3D modeling, I provide high-quality architectural and engineering designs for construction projects. My services include: ✅ 3D Modeling & Rendering (Residential & Commercial Buildings) ✅ BIM & CAD Drafting (Revit, AutoCAD) ✅ Prototype & Concept Design ✅ Technical Drawings & Floor Plans ✅ Construction Documentation Additionally, I am skilled in Canva, Excel, and PowerPoint, allowing me to create professional presentations, reports, and project documentation for clients. If you need construction drawings, 3D modeling, or professional design support, feel free to contact me!

• Expert in 3D modeling in SolidWorks CAD Software • Expert in Part and Assembly drawings • Proficient in 2D drafting, Simulation and Rendering in SolidWorks • Expert in SolidWorks Inspection - genera... Read more

• Expert in 3D modeling in SolidWorks CAD Software • Expert in Part and Assembly drawings • Proficient in 2D drafting, Simulation and Rendering in SolidWorks • Expert in SolidWorks Inspection - generation of balloon prints and custom inspection reports • Experienced in 3D printing concept designs • Experienced in Product design (DFM & DFA) from concept stage to drawing release for manufacturing • Experienced in manufacturing processes with good understanding of machines

- assessing project requirements - measuring the performance of mechanical components, devices and engines - agreeing budgets, timescales and specifications with clients and managers - mainta... Read more

- assessing project requirements - measuring the performance of mechanical components, devices and engines - agreeing budgets, timescales and specifications with clients and managers - maintaining and modifying equipment to ensure that it is safe, reliable and efficient - using computer-aided design/modelling software liaising with suppliers - undertaking relevant research - producing and implementing designs and test procedures - presenting designs to managers and clients - testing, evaluating, modifying and re-testing products - writing reports and documentation - providing technical advice - analysing and interpreting data.

Professional engineer, a RAeS Associate Member with a sound knowledge of the Aerospace and Mechanical industry. I have demonstrated strong problem solving skills and gained integrity through various p... Read more

Professional engineer, a RAeS Associate Member with a sound knowledge of the Aerospace and Mechanical industry. I have demonstrated strong problem solving skills and gained integrity through various positions. I have worked in cross functional and multicultural teams in challenging environments. I managed designs and projects in different companies. • I designed 3D parts and detailed 2D drawings paying attention to GT&T • I worked with the PLM system, created Bill of Materials, associated data for prototype and product release • Modification of tooling, jigs and fixtures design • I created and updated BOM, design sketches, diagrams • I created and verified specification for packaging, external supplier specifications to provide standard cost structure and instructions for manufacturing • I created test requirements, trials orders, reports, concessions and permits • I liaised with suppliers and met military personals in France and Portugal for business meetings and training

- Test and develop models of alternate processing methods and designs to evaluate their feasibility, the necessity of modification, possible new applications, and operating condition effects. - Develo... Read more

- Test and develop models of alternate processing methods and designs to evaluate their feasibility, the necessity of modification, possible new applications, and operating condition effects. - Develop, monitor, and coordinate all production areas, such as the operation of product designs, fabrication, and selection of manufacturing methods. - Coordinate and establish safety and maintenance procedures, supply of materials, and service schedule required to maintain equipment and machines in the recommended condition. - Submit bids and estimate costs for engineering, extraction, or construction projects, and prepare the necessary contract documents. - Investigate difficulties and failures of equipment to diagnose faulty operations and provide suggestions to the maintenance crew. - Communicate and discuss with engineers and related personnel to provide technical details, address system malfunctions, and implement operating procedures. - Oversee drafters as they develop a product’s structural design using drafting tools and computer-assisted drafting or design software and equipment. - Supervise installation, operation, repair, and maintenance to ensure that equipment and machines adhere to specifications. - Perform personnel functions, such as supervising technicians, technologists, production workers, and other engineers, and designing evaluation programs. - Give feedback to the design engineering company about customer requirements. - Read and interpret technical drawings, blueprints, computer-generated reports, and schematics. - Suggest design modifications to get rid of system or machine malfunctions. - Analyze and research customer design manuals, specifications, proposals, and other relevant data to assess the cost, maintenance requirements, and feasibility of applications or designs. - Research, design, install, operate, maintain, and evaluate mechanical products, systems, processes, and equipment to meet requirements while applying knowledge of the different engineering principles. - Specify system components to guarantee conformity with performance and engineering design specifications. - Study different industrial processes to identify the equipment’s application areas. - Conduct and supervise research that analyzes and tests the performance, operation, design, and feasibility of systems, components, and equipment. - Write performance requirements for engineering or product development projects.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

A meticulous and organized individual seeking a position in the Engineering Design industry. Skilled at developing reports, analyzing data, and identifying solutions. Strong ability to oversee complex... Read more

A meticulous and organized individual seeking a position in the Engineering Design industry. Skilled at developing reports, analyzing data, and identifying solutions. Strong ability to oversee complex projects. Innovative, creative, and willing to contribute ideas and learn new things.

Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering discipline... Read more

Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Fusion360 software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports.

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like st... Read more

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like stress, fatigue, dynamic analysis. Also, I can do more simple jobs like 3D modeling, drawings. I participated in the design and fabrication of a Formula Student car. Also, I competed in the Formula Student competition. I have experience in 3D modelling, product design, fabrication and product development. I can do reports, calculations, FEA, dynamic simulations, presentations. I have experience working in an engineering company. I design products that satisfy the client's needs.

I have been practicing civil engineering for the past 12 years throughout the United States. I am proficient in using AutoCAD and Microstation platforms. I can perform feasibility studies, environmen... Read more

I have been practicing civil engineering for the past 12 years throughout the United States. I am proficient in using AutoCAD and Microstation platforms. I can perform feasibility studies, environmental studies, and generate plans that are ready to be reviewed by City officials. I am extremely detail-oriented and can comfortably work with a multi-disciplinary team. I can prepare your plans on AutoCAD or Microstation as well as issue exhibits and reports.