Hire the best freelance material specification expert designers for your company

In my 20+ year career I have successfully served a variety of clients such as MGM, The Cheesecake Factory, and Epic Care. My proficiencies in Auto CAD, Adobe Photoshop and Illustrator along with my p... Read more

In my 20+ year career I have successfully served a variety of clients such as MGM, The Cheesecake Factory, and Epic Care. My proficiencies in Auto CAD, Adobe Photoshop and Illustrator along with my passion for the craft and dedication to each deadline allow me to prepare effective presentations and working drawings from my home office. Operating from a home office for more than three years has honed my abilities to successfully manage time in order to meet each deadline. I have extensive experience space planning within code requirements to provide the maximum client benefit both aesthetically and functionally. I use custom CAD blocks that reflect actual furniture dimensions in order to achieve an end result that is realistic and able to pass field inspections. My experience is well rounded and includes not only full interior design working drawings such as wall and floor finish plans, elevations, millwork details, reflected ceiling plans, and item and finish schedules but also complete design development presentations including rendered floor plans and elevations in photoshop. Often these renderings are so visually descriptive that several past clients have decided that they don't need to order a 3-D rendering. In addition, I have successfully translated many clients' branding into integral interior design solutions. My portfolio of past work demonstrates the variety of experience I have in the commercial interior design industry and reveals the great fit my skills are with this particular freelance job. In addition, I pride myself in working with many different personality types and I approach each new challenge with optimism and enthusiasm! My belief in communication and thorough, mindful quality control has led to a multitude of satisfied customers over the course of my successful career.

I am a degreed Mechanical Engineer with 29 years of experience. I have a wide breadth of expertise ranging from the design and development of complex gear mechanisms and injection molding to foundry o... Read more

I am a degreed Mechanical Engineer with 29 years of experience. I have a wide breadth of expertise ranging from the design and development of complex gear mechanisms and injection molding to foundry operations and mass production. Specific skills and areas of expertise: • Linkages, gear systems, and transmissions (from small millimeter systems to large agricultural-equipment) • Machined, injected, cast/foundry, and stamped production methodologies • Design for manufacturability (DFM) 
 • Material selection Software: SolidWorks, Creo, TurboCad, and DesignSpark Solving difficult problems through creative thinking is my greatest strength. I have held engineering management roles at DANA and TYCO.

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

I am a a civil engineer bachelor. With 3 years of the best experiece. I design 3d models and create 2d and 3d designs I complete my set with the ability to make 3d models with various cad softwares. I... Read more

I am a a civil engineer bachelor. With 3 years of the best experiece. I design 3d models and create 2d and 3d designs I complete my set with the ability to make 3d models with various cad softwares. I have completed various jobs from many clients in many places and have a good ear to listen to the clients needs and clear ability to make that dream a reality.

Freelance Designer with over 10 years experience in residential and commercial interior design and construction. Read more

Freelance Designer with over 10 years experience in residential and commercial interior design and construction.

8 years of professional experience of direct involvement on various international oil & gas projects spread across tender, design, fabrication, construction, and installation phase. Solution-oriented... Read more

8 years of professional experience of direct involvement on various international oil & gas projects spread across tender, design, fabrication, construction, and installation phase. Solution-oriented with strong analytical skills.

I have 11 years of experience in the field of 3d design rendering and modeling. You just provide us your 2d sketch and material specification. We will provide give you realistic 3d view of your design... Read more

I have 11 years of experience in the field of 3d design rendering and modeling. You just provide us your 2d sketch and material specification. We will provide give you realistic 3d view of your design.

20 years experience as tooling and plastic/metallic parts developer; Large experience in product development emphasis in plastic parts; Solid experience in plastic mold design, develop and specificati... Read more

20 years experience as tooling and plastic/metallic parts developer; Large experience in product development emphasis in plastic parts; Solid experience in plastic mold design, develop and specification; Cost reduction and continuous improvement in the plastic mold are nowadays on my main responsibilities; Experienced in the raw material specification for new products; Free Form Modeling, complex models and parametric models (NX); Large experience in product development emphasis in plastic parts; Experienced in the raw material specification for new products; Free Form Modeling, complex models and parametric models (NX); The user of Solid Edge, Solid Works, Unigraphics NX, PRO/E, AutoCAD, Teamcenter, and Moldflow; Prepare and teach technical classes; Languages: English (Advanced), Spanish (Basic), and Portuguese (Native).

• Experienced in multiple disciplines of engineering: Engineering design, assembly manufacturing, quality control, project management and coordination, and engineering business development. • Creat... Read more

• Experienced in multiple disciplines of engineering: Engineering design, assembly manufacturing, quality control, project management and coordination, and engineering business development. • Create 3D Models, 2D drawings and preparation and review of Bills of Material and specifications of items required for the fabrication of machine components or complex assemblies using Solidworks and AutoCAD. • Proficient in designing components with innovative designs and manufactured by different manufacturing process such as forging, casting, welding, brazing etc. in a high volume environment. • Extensive experience of selection of various materials for different application, especially for abrasive wear applications. Highly experience with different heat treatments process for alloy and tool steels used in rock and soft ground mining application. • Extensive experience of performing engineering calculations such as calculating stress, deflection, bending moment, bearing life, shaft diameter, bolt size, thread length, etc. • Extensive experience in GD&T and Tolerance stack up analysis • Involved in R&D projects on improving cutting tools (disc cutters & ripper tools) performance in collaboration with Caterpillar technical global R&D team in Peoria, US and other teams in Italy and India. • Coordinate designs and details with other engineering departments to ensure interdepartmental functionality and technical specification compliance.

Going through the Tender Specification. Making Proposals & Providing Bill of material. Thermal Design, Detailed Engineering Inputs preparation. Bought out specification preparation Vendor offer evalua... Read more

Going through the Tender Specification. Making Proposals & Providing Bill of material. Thermal Design, Detailed Engineering Inputs preparation. Bought out specification preparation Vendor offer evaluation etc

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspecti... Read more

WORK EXPERIENCE : ● AXLES INDIA LIMITED, Sriperumbudur, Chennai - Quality Assurance Department. 12.06.2019 to 24.11.2020 Responsibilities: ➔ Perform and document the visual and dimensional inspection using 7 QC tools. ➔ Inspected product designs prior to use and producing the product as per customer recruitments. ➔ Preparing PPAP documents and maintaining logs for management to review. ➔ Investigated in-process non-conformance and effectively determined the scope of the non-conformance and configured NCR reports. ➔ Communicated to peers, manufacturing and maintenance personnel and taking preventive action using WHY-WHY analysis. ➔ Performing JH activity and maintaining 5S while using work habits. ➔ Documented and presented the machine non conformances and products failure in Quality TPM. ➔ Attending customer complaints and preparing 8D reports. Additional Technical Qualifications : ➔ PDMS Pipe modeling as per P&ID and study piping including necessary line slopes, instrumentation, valves and special purpose items. ➔ 3D modelling of Equipment, pipework, Structure, Draft, isodraft in PDMS. ➔ Pipe rack and expansion loop design. ➔ Piping material specification and valve data sheet. ➔ 3D modelling of Support Modelling using MDS. ➔ Preparation of material specification and MTO. ➔ Pressure design of pipe and components. ➔ Wall thickness, branch reinforcement &PT rating etc. ➔ Flexibility analysis of piping systems. ➔ Stress intensification factor calculations. INDUSTRY KNOWLEDGE : ➔ International design codes & dimensional standards. ➔ ANSI/ASME, API, BS, ASTM & their use in design & analysis. ➔ PFD & P&ID drawing, process equipment & plant layout Statutory bodies & regulations. ➔ Geometric Dimensioning & Tolerancing.. ➔ Production Part Approval Process (PPAP). ➔ Total Productive Maintenance (TPM). ➔ Manufacturing Engineering. ➔ Root Cause Analysis. ➔ ISO Standards.

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowle... Read more

A competent professional with overall 10+years of experience, worked extensively on piping engineering in Water line & wastewater treatment plant projects, Power plants/Boiler projects thorough knowledge of field activities with good knowledge in terms of performing and supervising of various engineering activities such as preparation of Piping Design Basics, Piping Material Specification (MTO), Review of Piping & Instrumentation Diagram (P&ID), Development of Plant and Equipment layout, Conceptualization and generation of Piping General arrangement Drawing & Isometrics, monitoring and supervision of drafting, Preparation for Line Drawing, Manufacturing Dwgs, Bill of materials Preparation & checking, Preparation of Pipe/Fittings Quote, Review and Comment on vendor / specialty items, Piping supports design, Pipe Rack layout &Piping calculation, Hands of experience drafting tools & Project lead Software tools

QUALIFICATION SUMMARY Solid technical credentials. Extensive product development experience. Bills of materials, material specification, ASME Y14 drawing standards, GD&T, and tolerance stack-up analy... Read more

QUALIFICATION SUMMARY Solid technical credentials. Extensive product development experience. Bills of materials, material specification, ASME Y14 drawing standards, GD&T, and tolerance stack-up analysis. Expert draftsman with over 30 years experience in 2D and 3D computer-aided design and configuration management. Proficient with AutoCAD, Solidworks, and Agile PLM. Expertise in electronic packaging, conduction cooling and thermal analysis, wiring and cable harness routing, vibration isolation, and environmental testing for regulatory compliance. Working knowledge of machining, die casting, sheet metal stamping and press brake forming, welding, extrusions, injection-molding, thermoforming, water-jet and laser cutting, 3D printing. Work independently or with teams of engineers and other disciplines. Excellent failure investigation, technical writing & presentation, and both oral and written communication skills. Licensed professional engineer (Colorado PE-27584). Captain, college varsity rifle team. Experienced sailing instructor. Veteran U.S. Navy salvage diver (Honorable Discharge).

ILE Committed and competent professional having 8+ years’ experience with key result areas pertaining to Advanced Piping Designing Management with Techno commercial competencies; Previously working... Read more

ILE Committed and competent professional having 8+ years’ experience with key result areas pertaining to Advanced Piping Designing Management with Techno commercial competencies; Previously working with Consolidated Gulf co L.L.C ,Doha, Qatar as a Piping designer Expertise in Detail engineering for various Industries sectors in Offshore and Onshore; exposure in designing Piping Layout in 2D and 3D Environment using AutoCAD, Micro station, PDMS (AVEVA Plant Design Management System) & PDS. Depth in implementation Piping Components, Piping Supports, Piping layouts, design codes and system design and enabling corrosion protection for piping. Proficient in Isometric drawings, piping material specification sheet, GA Drawings, layouts, International design codes and P&ID; A team player and leader with exemplary communication, analytical, interpersonal and problem solving skills. Proven expertise in implementing cost saving and manpower rationalization projects to achieve overall competitiveness. Core Competencies: Piping Engineering ( Detailed Engineering ( Piping ( Pipe Routing

Preparation of technical and commercial proposal for projects based on received tender documents from Client. Develop cost-effective design layouts based on project Requirements within given assumptio... Read more

Preparation of technical and commercial proposal for projects based on received tender documents from Client. Develop cost-effective design layouts based on project Requirements within given assumptions and Constrains. Adhere to established design guidelines and procedures. Analyse design issues and recommend corrective actions. Perform civil design analysis and calculations according to project requirements for all cast in place and precast/ pre-stressed buildings (both commercial and residential) using Manual Calculations and latest recognised software and technologies such as STAAD Pro V8I, ETABS, SAP2000, SAFE, CONCISE BEAM, SP COLUMN. Determine construction cost and material estimates based on civil designs. Review of third party civil Design including base design and detail design (detailed drawings, design calculations and material technical specification) based on project technical specifications, pre-bid and post-bid clarifications.

I am an experienced and certified CAD draftsman using, AutoCAD 2019, Autodesk Revit 2021 and Autodesk Inventor 2018. I am a former CNC Machinist from different manufacturing and fabrication companies.... Read more

I am an experienced and certified CAD draftsman using, AutoCAD 2019, Autodesk Revit 2021 and Autodesk Inventor 2018. I am a former CNC Machinist from different manufacturing and fabrication companies. I am familiar with GD&T specification for assembly of mechanical parts. I can read architectural and structural drawing and I can convert it to Autodesk Revit for modeling and rendering with lights, material and textures. I can produce complete set of newly drawn plan ready for manufacture or construction. I am approachable anytime. Just message me. Thank you.

British Mechanical Design Engineer with 15 years of well rounded industrial experience. I have professional experience in each of the industrial sectors listed below: - Automotive - Defence - Ind... Read more

British Mechanical Design Engineer with 15 years of well rounded industrial experience. I have professional experience in each of the industrial sectors listed below: - Automotive - Defence - Industrial Switchgear - White Goods (Domestic Appliance, Refrigeration) - Agricultural I Can take on work related to various aspects of industry: - Product Design (ergonomics, aesthetics) - Equipment/Machine design (process and production jigs, fixture and manufacturing machines) - Test equipment design (Accelerated life testing jigs, failure investigation solutions) - Complex mechanism design - Production Line (workflow and process setups) On offer to support each job is a wealth of experience in the following disciplines: - Plastic Injection Moulding (part design, manufacturing, material selection, tool specification) - Die Casting - Sheet Metal Design (enclosure design, metal pressings, welded fabrications) - Mechanical Component Selection and Verification - Prototyping (3D printing, FDM, SLA, SLS, good ol' mechanical prototypes) - CAD Design (3D modelling, 2D drafting to whatever specification you require) - Design analysis and verification tools (FMEA, test and verification plans) Happy to discuss your requirements for your next job.

Extensive Experience in Process Design & Project Management in Power, Pulp & Paper Industry, and Other Heavy Industrial Process Industries for both Greenfield and Brownfield settings on small, mid-siz... Read more

Extensive Experience in Process Design & Project Management in Power, Pulp & Paper Industry, and Other Heavy Industrial Process Industries for both Greenfield and Brownfield settings on small, mid-sized and large projects. Technical expertise in Detailed Design and Design Execution with Process Systems, Fluid Systems, Thermodynamic Systems, Static and Rotating Equipment Sizing and Selection; Material Selection, System Performance Definition, Performance Testing, and Over-Pressure Protection Design. Thoroughly versed in Coordination of Work; Quality Specification, Control & Assurance; Construction Management; Contract Development & Negotiation; Contract Oversight; Significant Experience in the Interpretation & Application of Local, National & International Codes and Standards; Certified Six Sigma Yellow Belt (Bechtel) and Greenbelt (General Electric).

1. Planning A Layout, B layout & 3D process for Progressive, Transfer & Tandem Dies 2.One-step & Incremental Formability Simulation Using Auto Form. 3.3D & 2D Die Design for Progressive, Transfer &Tan... Read more

1. Planning A Layout, B layout & 3D process for Progressive, Transfer & Tandem Dies 2.One-step & Incremental Formability Simulation Using Auto Form. 3.3D & 2D Die Design for Progressive, Transfer &Tandem Dies Using CatiaV5 Tool with Parametric Method. 4.Exposed to Transfer Tools with acquaintance of Transfer press Specification & working 5.Exposed to Various die designs like Draw, Trim Flange& Restrike (Single & double Pad Construction) & Cam designs Like Aerial, Die mounted, Fill & Upper pad mounted cams. 6.Blank Development & Material Utilization 7 Exposed to Die cost estimation, Part cost estimation, Viability study for Stamping parts 8.Worked in different technical standards of Renault, Ford(WDX) VW, GM, Tata, Bajaj & many Tier-1 stamping suppliers 9.Exposed to various Jigs, Fixture designs & development for BIW. 10.Stamping Material ranges from 0.6 mm – 12.0 mm Thickness. a.Ultra High Strength Steels (UHS) b.High Strength Low Alloy Steel (HSLA) c.Dual Phase Steel d.Low Carbon Steel e.Stainless Steel 10.Currently handling Green Project with various function of Stamping process 'Die design, Die face & Simulation, Vendor die making, & Vendor tool cost reduction'.

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airfra... Read more

I graduated from University of Maryland, Baltimore County with a Bachelors of Science Degree in Mechanical Engineering in 2005 and immediately entered the aerospace industry working for a major airframe manufacturer. There I learned and used CATIA v4 and was fully trained in CATIA v5. I've spent the last 10 years working in various design roles as an individual contributor and design lead of cross functional teams on simple and complex projects with values exceeding $15 million. I have advanced skills in CATIA v5 in areas of solid modeling, complex surfacing, assembly design, and drafting as well as bill of material and bill of specification creation, modification, and maintenance. I also have intermediate skills in the CATIA v5 kinematics package.

Design Engineer (Mechanical) I am responsible for following task in my current job: 1. Design and modification of new and existing products. 2. 3D Modelling and Drafting of components (on unigrap... Read more

Design Engineer (Mechanical) I am responsible for following task in my current job: 1. Design and modification of new and existing products. 2. 3D Modelling and Drafting of components (on unigraphics NX 12) 3. Prepare bill of material (BOM). 4. Indent preparation as per customer requirement / specification (with help of AutoCAD in 2D format). 5. Oversee mechanical design phases from concept through production. 6. Solve various problems come during production and assembly of components, solve problem during manufacturing. 7. Vendor visit, guidance, quality check and help in deviation of product with QA department. 8. Travel to project sites when necessary to take physical measurements required to complete requested design (Reverse engineering) 9. Conduct in-house test such as, (Mechanical Endurance Test, Temperature Rise Test) and prepare report of test 10. Collaborate with senior mechanical designers on large scale design projects.

Designing and executing technical drawings to support the design vision is a passion of mine as proficiency in technical drawing is crucial in making our designs come to life. As a licensed interior... Read more

Designing and executing technical drawings to support the design vision is a passion of mine as proficiency in technical drawing is crucial in making our designs come to life. As a licensed interior designer, my role involves assisting in creating comprehensive drawing packages for various projects, versed in both metric & imperial units. These packages include documentation for permits, tender submissions, and construction sets. My projects span a wide range, from private residential spaces and townhouses to condominiums, sales offices, and commercial offices. Whether it’s new construction or renovating existing spaces, my focus is on meticulously executing drawing sets & FF&E specification schedules to minimize errors and requests for information (RFIs) during the construction phase. Once a design receives client approval, I play a key role in developing a working drawing set. This set encompasses plans and elevations. As the drawing package transitions to a Construction Set, I analyze the plans and elevations in crafting millwork and construction details to effectively convey the design intent. As part of my role, I provide technical support for both AutoCAD and Microsoft Excel. Specifically for AutoCAD, I leverage the Sheet Set Manager to manage drawing sets. I create parametric CAD blocks for drawing templates, blocks with annotative scale for drawing symbols, establish data connections using fields, and generate tables for drawing legends. In my work with Microsoft Excel, I utilize formulas such as VLOOKUP and XLOOKUP to create FF&E (Furniture, Fixtures, and Equipment) specification schedules. I maintain an up-to-date supplier list by linking it to the FF&E specification for accurate sales representative information. Additionally, I leverage Pivot Tables to manipulate data, allowing me to generate FF&E specifications organized by room or material. These specifications can include pricing and square footage calculations for procurement and quantity take-offs. This is a game-changer for managing specification schedules. I assist designers in customizing drawing setups for each project, recognizing that a one-size-fits-all approach falls short. My dedication to workflow efficiency enables the designers to focus more on creativity and less on troubleshooting CAD drawings and specifications.

12+ Years’ of Experience in Oil and Gas, Pipeline & Piping Industry. Expertise in Onshore Pipeline Engineering related to hydrocarbon industry. Conversant with Pipeline Route Selection, Alignmen... Read more

12+ Years’ of Experience in Oil and Gas, Pipeline & Piping Industry. Expertise in Onshore Pipeline Engineering related to hydrocarbon industry. Conversant with Pipeline Route Selection, Alignment Sheets, Crossing Drawings, Station Layouts, Material Specifications, Material Procurement and possess knowledge of ASME B 31.4/31.8 and B 31.3 and various pipeline related international codes/standards. Expertise in Drafting, Detailing & Designing for Piping, Pipelines & Cross Country Pipelines Projects in UAE, Canada Australia & Turkey.

I am an Electrical Engineer who is conversant with all aspects of consultancy works associated with Electrical Services installations including lighting design, small power, raw power and clean power... Read more

I am an Electrical Engineer who is conversant with all aspects of consultancy works associated with Electrical Services installations including lighting design, small power, raw power and clean power installations. Low and Medium Voltage switchgear design and installation, fire alarm detection, structured cabling and security installations. Generator back up design and installation, lifts and escalator installations. This also involves Feasibility Studies and Reports, Planning Proposals, Cost Estimates, Detailed Electrical Services Project Design, Specifications and Bills of Quantities, Contract Management and Cost Control, Preparation and Settlement of Interim and Final Contract Accounts, Site Supervision, Commissioning and Advice on Operation of Plant, Provision of Record Plans, and Maintenance Programmes. Accomplishments • Conducted site assessments of electrical components and • Obtained clients' detailed briefs through collaboration with project managers and architects. • Coordinated project planning and design reviews of Electrical Engineering Works while Liaising with other consultants commissioned to support design works for construction. • Recommended sustainable and cost-effective solutions through the preparation of comprehensive and accurate Project cost Estimates, Technical Specifications and Bills of Quantities of electrical works, • Provided technical support in Tender processes, analysis and Evaluation, Reporting and award of contracts that supported the procurement team. • Spearheaded the Preparation of Interim Valuations, Variation Orders, Final Accounts, and closure documents, including snag lists for Electrical Installations. • Chaired the handover meetings in project initiation and handover stages while delegating tasks with timelines to different teams. • Supervised contractors in the project construction process, monitored site work through site visits, verified and approved material specification and quality during installations, testing and commissioning electrical services. • Executed the project closure process, handing over after the defects liability period and issued high quality related documentation such as as-built drawings, maintenance manuals and product warranties for archiving. • Ensured that all engineering work was carried out as per specifications, statutory requirements, laws, rules, regulations and other contractual requirements, with due regard to safety, operability and maintainability. Key Achievements • Implemented more than 20 energy efficient projects successfully spanning industrial buildings, housing schemes, high-rise office buildings, hospitals, hotels and educational institutions. • Delivered projects worth more than Kshs 40 million in electrical installations project cost. • Addressed simple and complex issues that emerge during a project cycle through work coordination and finding alternative solutions to engineering problems. • Performed value engineering in projects to lower the cost of projects and meet clients’ budgets. • Executed super-quality projects within desired timelines bringing satisfaction to clients.

HVAC Design Analysis & Project Execution Skills: • Heat load Estimation & Calculations for Industrial Buildings • HVAC Units / Equipment selection • HVAC Systems Fan Selections • Preparation/ap... Read more

HVAC Design Analysis & Project Execution Skills: • Heat load Estimation & Calculations for Industrial Buildings • HVAC Units / Equipment selection • HVAC Systems Fan Selections • Preparation/approval of GA drawings of AHUs, FCUs, Exhaust Fans etc. • Preparation of Air flow diagrams • Preparation of Ducting layouts for HVAC Systems • Preparation of Piping layouts for HVAC Systems • Preparation of Tender specifications & BOQs • Taking approvals of working Drawings from Consultant / Client • Preparation of User requirement specifications of HVAC Systems • Preparation of Technical specification of equipment like AHUs, FCUs, Pumps, Chillers etc. • Coordination between Client / Consultant & Vendors • Technical Bid Analysis • Vendor Documents Reviews / Approvals • Vendor / contractors / Subcontractors Control & coordination • Aware of API and Formulation facility of Pharma sectors • Preparation / Approval of document like Design, Installation, Operation & Performance Qualification for HVAC Systems • Preparation of Purchase Requisition as per BOQ • Preparation of Project Planning, scheduling and Monthly Progress Reports • Follow up with vendors and consultants regarding Engineering activities and coordination with the vendors for timely manufacturing and the delivery of equipment to the site. Inspection of Invoices after delivery of material to site • Coordination with site regarding Erection and commissioning of equipment as per protocol and final documentation for handover of project • Electric motor selection for AHUs • Preparation of Power Cable Schedules for HVAC Equipment • Site Control activities • Project Execution & Commissioning