Hire the best freelance Piping Arrangement Drawings expert designers for your company

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industri... Read more

Dedicated and highly motivated piping and structural designer with a strong technical aptitude and passion for new design innovations. I’ve been in the petrochemical and crude oil production industries for over 9 years with design experience of various facilities including: tank batteries, CVR systems, well testing systems, gas plants, water plants, dehydration plants, pump stations, equipment skids and pipe lines to name a few. My responsibilities have included, but have not been limited to, piping design, structural design, onsite as-built verification, 3D Laser Scanning, drawing production, and construction support. I’m proficient in multiple 2D and 3D softwares such as, AutoCAD, AutoCAD Plant 3D, CADWorx, Solidworks, and Aveva’s PDMS.

Expertise in 3D Modeling and 2D Drawings using Solidworks, AutoCAD, Creo software. Experience in Design of Machineries, Mechanical Equipment, Piping Skids, Fabricated Structures and Pressure Vessels.... Read more

Expertise in 3D Modeling and 2D Drawings using Solidworks, AutoCAD, Creo software. Experience in Design of Machineries, Mechanical Equipment, Piping Skids, Fabricated Structures and Pressure Vessels. Good with Casting, Machined, Sheetmetal, Fabrication parts & Complex mechanical assemblies. I have worked for projects within Industrial Machineries, Valves, Mining & Oil/Gas industries. Excellent with Engineering Calculations and Design for Manufacturing & Assembly (DFMA)

Experienced Process Piping Engineer with 14 years of comprehensive experience in onshore plant engineering and offshore topside platform layout through various EPC projects, ranging from upstream... Read more

Experienced Process Piping Engineer with 14 years of comprehensive experience in onshore plant engineering and offshore topside platform layout through various EPC projects, ranging from upstream topside platforms to downstream refineries, petrochemical, gas processing and process chemical facilities. Well-versed in project execution of greenfield as well as brownfield upgrading projects, from Front-End Engineering & Design (FEED) to Detail Engineering stage. Strong experience collaborating with engineers from various disciplines to increase productivity and solve challenges. Highly organized to meet project deadlines and fulfill commitments.

Mechanical engineer with 4 years plus designing experiance in 2D & 3D modeling. Also have professional experiance on Piping layout, Isometric & Equipment Layout in Autodesk Plant 3D. Read more

Mechanical engineer with 4 years plus designing experiance in 2D & 3D modeling. Also have professional experiance on Piping layout, Isometric & Equipment Layout in Autodesk Plant 3D.

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools lik... Read more

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools like E3d, Sp3d, Pdms and Pds. Roles and Responsibilities:- Piping layout designing 3d Modeling of Equipment, Piping, etc., Preparation of Plotplan,Keyplan,Equipmentlayout,Piping GA’s Vendor drawings checking Interacts with other disciplines Inter-Discipline Documents Checking & Clearing Isometric checking Nozzle orientation Support callout based on stress output Attending Model review & comments providing to other disciplines MTO Activities Input preparations for civil works Tie-in/As built works in both Brownfield and Greenfield IFC iso issuing Preparation of Combined UG Plan drawings UG piping/Isometrics Preparation of piping GA drawings Manages and maintains the Project Documentation Model close out activities

• Extensive experience in Oil & Gas (Offshore & Onshore), Hydropower plant projects. • 8+ years of experience in Designing Piping, Electrical, Equipments, Civil & Structurals. • Well versed in E3D (De... Read more

• Extensive experience in Oil & Gas (Offshore & Onshore), Hydropower plant projects. • 8+ years of experience in Designing Piping, Electrical, Equipments, Civil & Structurals. • Well versed in E3D (Design, Draw, Isodraft & MDS) modules, AutoCAD, AutoCAD Plant3D and PDMS softwares. • Worked for GE Renewable Energy projects.

Autodesk Inventor Autodesk Autocad Solid works I can make measurements and Model up parts and or modify parts and components in assemblies I can also detail on inventor I completed a conveyor model... Read more

Autodesk Inventor Autodesk Autocad Solid works I can make measurements and Model up parts and or modify parts and components in assemblies I can also detail on inventor I completed a conveyor model for college

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns.... Read more

More than 15 years experience in the filed of Design & Drafting on several projects. Strong Technical knowledge for Piping, pressure vessels. Storage tanks, heat exchanger, pump, compressors, columns. Towers, Steel Structure, Mechanical & Civil Drafting. Preparing propose initial conceptual design layouts for various projects. Ability to create detailed construction drawings independently which is included related specifications, and capable of enforcing such specifications. Involve in construction, supervision, inspection and material take-off. Involve with Auto CAD 2D & 3D,Bently open plant 3D-Modeler, Piping plan, piping Isometric Drawings, Sheet Metal Work, Mechanical Drawings, PFD, P&ID, and Civil Layout etc. A keen and dedicated Piping Designer having approx. 10+ years of experience in Oil & Gas, Petrochemical, and Mechanical equipment industries. My Responsibilities Includes: • Preparation and modification of Piping layouts. • Preparation of piping isometrics. • Extraction of isometrics form plan. • Piping of storage tank, vessel, heat exchanger, Pumps and Compressors  equipment layout and general arrangement drawings  Under Ground Piping Drawings  • Preparation and modification of support layout. • Preparation of M.T.O. (Weight Calculation) and B.O.Q. • Sketching to provide information and site conditions.  Preparing Steel Structure drawings for installation, proposed new Platform, Joints detail (Welded & Bolted) Bracing, ladders. • Fabrication detail drawings • Rigging plan views from PDS 3D model. • Site Supervision during Project execution and Turn Around. • Generation of bill of material for Projects. • Preparation and modification of Equipment drawings.  • Support marking as per stress analysis report.  Design the BOX UP for different kind of leakages  • PFD, P&IDs, MSDs.

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects b... Read more

Quality focused Electrical Draftsman with 10 years of experience in Electrical and Mechanical (MEP) projects. Designed, fabricated, tested and commissioned heavy industry and infrastructure projects based on Australian, IEC and NFPA standards. Supported US clients' virtually in designing, shop drawing and estimation of building services. Have a track record of performing Projects on the following areas: • Shop Drawing and As Build Drawing Preparation • Medium and Low Voltage Switching and Distribution • Electrical Substation • Load analysis and distribution • Cable and Equipment Sizing • Internal and External Lighting • Earthing and Lightning Protection • Photovoltic Solar System • MV/LV Power transformers • Diesel engine and pump • Lift and Escalator • Power Factor Correction • Harmonic Management • Variable Frequency Drives • Instrumentation and automation • Fire Alarm and Hydrant System • Gas and Foam Based Fire Protection • Estimation • BOQ and Material Take Off (MTO) Preparation • Breakdown of work preparation SOFT SKILLS includes: • Proven PRINCE2 Project Management skills supported by formal qualifications. • A thorough understanding of Project Life Cycle management. • Strong analytical / problem solving skills in both document and at-site. • Negotiating with contractors and suppliers for materials and services. • Demonstrated ability to work with and support cross-functional project teams. • Good conflict management and team leading capability. • Excellent documentation & report writing skills. • Able to continuously meet targets and surpass expectations. • Very keen to develop new skills and learn new things to cater project goals. Proficient with below mentioned COMPUTER programs: • AutoCAD Electrical/ Architecture, Revit MEP for Drafting/ Shop Drawing • DIALux, Etap, EcoStruxure for Electrical Power Design • Hydraulic Calculation (Canute LLP, Elite) for Piping Design • Microsoft Office (Project, Power Point and Excel, Word, Outlook) • Adobe InDesign, Photoshop and Illustrator • Online presentations and meetings arrangement • Programming for FDA and BMS Major PROJECTS includes: • Electrical and Process Automation work design and supervision in Infant Formula Bulk Repacking Project. Project owner: Nestle (Multi National Company) • Electrical Design, Fire Detection and Protection Design, Plumbing Design, Calculation, Document Submission for Material Approval, Shop Drawing and As Build Drawing at Dhaka Metro Rail, Line 6, CP-03 & 04 (LV System, SCADA & Fire Protection) Project owner: Government of Bangladesh. • Fire Detection and Protection System Design, Shop Drawing, Installation, Testing, Commissioning and As-build drawing preparation in BSRM Steel Melting and Billet Casting Plant, Unit-I &II. Project Owner: BSRM (Private Entity) • HVAC BMS system design, installation supervision, testing and commissioning of SMD-II, Project Owner: British American Tobacco (Multi National Company) Roughly, following is how I’d work to prepare electrical design, for a project like yours Step 1. Understand Architectural Layout and System requirement. Step 2. Position electrical points as per regulations, ie. I/O points, LPS, earthing, incoming line etc. Step 3. Position electrical points as per user’s requirement, ie. Luminaries, power sockets etc. Step 4. Find out load of every device and total demand. Apply demand factor and safety factor if required. Step 5. Sizing of circuits and cables. Step 6. Calculation for conduit or wireway. Step 7. Preparation of Bill of Quantity. I enjoy using my creative expertise and knowledge to provide my friends and clients with the best solutions. I like complicated and challenging requests, and my sense of tackling hard jobs makes me ready for almost any job in my areas of expertise, little or big. Thank you for visiting my profile!

An experienced Mechanical Design Engineer with a proven track record of success of over 20 years in commercial engineering market sectors mostly within the water industry along with some industrial ap... Read more

An experienced Mechanical Design Engineer with a proven track record of success of over 20 years in commercial engineering market sectors mostly within the water industry along with some industrial applications. Providing high-level mechanical design engineering practices to build consistently improved business performance. Recognised for commitment & quality of work to identify solutions for customer issues, undertaking and assuming additional responsibilities. Strong leadership, strategic planning & design & development experience. Deadline driven & quality focused, with excellent relationship management skills. Experienced in assessing the whole project scope, end to end project management, design reviews, systems analysis, solution definition, design & development, testing, manufacturing, hydraulics, mechanical fault diagnosis & resolution for a wide variety of equipment, quality control & assurance, documentation, project budget control, equipment procurement, design supervision, H&S risk assessment, installation method statements & system updates.

I'm Master of Mechanical Engineering who got diploma in Faculty of Mechanical Engineering and Naval Architecture in Zagreb, Croatia. During studying I gained experience in engineering design, product... Read more

I'm Master of Mechanical Engineering who got diploma in Faculty of Mechanical Engineering and Naval Architecture in Zagreb, Croatia. During studying I gained experience in engineering design, product development and FEM analysis working on various projects such as conceptual design of prosthetic leg and design of motorized nanolight trike for hang gliding. When it comes to 3D modeling, I'm proficient in SolidWorks, Siemens NX and Catia V5. I also have experience in usage of ergonomics module in software Catia V5. During work on my Master thesis I gained experience in FEM analysis using software Abaqus. Currently I am working as a piping engineer in shipbuilding. I'm designing 3D models of pipelines, HVAC elements, equipment and pipe supports. I also create fabrication pipe spool drawings and pipe arrangement drawings for grand block production stages. I am very skilled in software AVEVA E3D and AutoCAD. I am interested to work on projects which include engineering design, 3D modeling, FEM analysis, 3D pipe modeling and I offer mechanical drafting services.

Extensive experience in Mechanical Detail Engineering of Water, waste water & Industrial Water Projects. Overall detail Drawing work of Mechanical & Piping for Various Structures of Water treatment pl... Read more

Extensive experience in Mechanical Detail Engineering of Water, waste water & Industrial Water Projects. Overall detail Drawing work of Mechanical & Piping for Various Structures of Water treatment plant (WTP), Effluent treatment plant (ETP) & Sewage treatment plants (STP), Network Design & drawing work for water Distribution & Sewage collection system. Detail Mechanical & Piping Drawing of Pumping stations & Lifting stations for Water supply and Waste water projects. Worked in site Execution for Water & waste water Projects of Mechanical (Pumps, valves) & Piping Equipment. Detail Drawing of Distribution Network & Sewage Collection Network System. Mechanical and Piping drawing of Water treatment plant/Sewage Treatment plant. Preparation of L-section of water & sewer Network. Preparation of Mechanical System Drawings (Ventilation, AC system, Cranes & Hoists). Preparation of Basic Engineering Drawings (layout, PFD, P&ID, HFD). Preparation of Mechanical & Piping BOQ. A forward-thinking person with strong communication, analytical & organizational skills

15 years of experience in Detail engineering piping and construction to fabrication oil and gas for onshore-offshore Design on Modeling PDMS, E3D and Auto CAD (Advanced) support all department and... Read more

15 years of experience in Detail engineering piping and construction to fabrication oil and gas for onshore-offshore Design on Modeling PDMS, E3D and Auto CAD (Advanced) support all department and covering brownfield and greenfield projects. The main role and responsibility as design engineer for performing all piping and layout design and all drawing of piping package based on the project & process requirement. and other discipline. Able to the 3D Model project team and provide coordination for all discipline

Skid package design solution focusing on providing a high-level design of skid packages to ensure compliance with the customers’ requirements. P&ID lecture and interpretation, main equipments selectio... Read more

Skid package design solution focusing on providing a high-level design of skid packages to ensure compliance with the customers’ requirements. P&ID lecture and interpretation, main equipments selection, piping arrangement, codes and standards assurance, manufacture drawings and 3D model generation for analysis of the solution.

Collaborative Piping Designer/ Drafter with experience in leading design, development and testing of systems. Considered a valuable asset while contributing excellence in cross-functional projects to... Read more

Collaborative Piping Designer/ Drafter with experience in leading design, development and testing of systems. Considered a valuable asset while contributing excellence in cross-functional projects to deliver products and solutions on-time and within budget. Strong communicator with ability to translate design requirements into actionable plans.

• Plant Engineering: Process Plant Equipment and Piping Layout • Equipment: Nozzle orientation marks up on Mechanical Equipment drawings • Structure: Structural modeling for Process units and Pipe rac... Read more

• Plant Engineering: Process Plant Equipment and Piping Layout • Equipment: Nozzle orientation marks up on Mechanical Equipment drawings • Structure: Structural modeling for Process units and Pipe racks • Skids: 3D Modeling and Optimizing Skid drawings. • Support: 3D Modeling of Piping support layout and drawings • Isometric Drawing: Extracting and Checking of Piping Isometric drawings • Bill of Quantity: Extracting and Checking of Piping Bill of Quantity • Piping Review: Reviewing and preparing review document for piping drawing • Cods and Standard: ASME, DIN, SMS, ISO and IS standard • Review: Review of several plant engineering deliverables as per project requirement. • Software: PDMS, AutoCAD Mechanical, AutoCAD Plant 3D, AutoCAD Navis Work Manage, Bentley Microstation, Bentley Triforma, Bentley Structure, Bentley Plant Space Design Series and Bentley ProjectWise, AutoDesk Vault • Operating System: Windows 10/7/XP

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

(12) years experience in piping design and drafting for,chemical ,fertilizer (Crystallization,evaporation and ammunium nitrate unite),Cement works,Oil & Gas and Petrochemical industries,. Conceptual... Read more

(12) years experience in piping design and drafting for,chemical ,fertilizer (Crystallization,evaporation and ammunium nitrate unite),Cement works,Oil & Gas and Petrochemical industries,. Conceptual plant layout from preliminary documents such as PFD’s, geological plans, preliminary vendor data to produce a 3D cadworx based model showing major equipment, structures, modules and main pipe routes and access volumes • Experience with EPC Company in detailed design and drafting. - The production of mechanical and piping drawings associated with turn-key wood fuelled boiler installations, ducting and district heating systems and heat pumps systems including: - 2D Plantroom Layouts & Sections - 2D Pipework & piping Service Layouts - Mechanical & piping Schematics • Piping layout, plot plans, equipment arrangement with piping flexibility. • Perform squad check of vendor equipment drawings and other discipline drawings. •CAD software like AutoPlant V8i (expert), AutoCAD & CADWorx. • Applies design standards and principles in compliance with all applicable Codes and Specifications such as API, ASME, ANSI, etc. my ▒▒▒▒▒▒▒▒▒▒▒▒:▒▒▒▒▒▒▒▒▒▒▒▒

13 Years of Experience in 2D Piping &Process Designing. Autocad, As Built work. Chemical, Petrochemical, Power Sector. Read more

13 Years of Experience in 2D Piping &Process Designing. Autocad, As Built work. Chemical, Petrochemical, Power Sector.

I'm a Design Engineer (Piping, Pressure Vessels, Tanks, Skid Mounted Packages, Containers), Having a Solid Experience in:- * Piping Design, Drafting and 3D Modeling acc. to ASME B31.3, ASME B31.4 usi... Read more

I'm a Design Engineer (Piping, Pressure Vessels, Tanks, Skid Mounted Packages, Containers), Having a Solid Experience in:- * Piping Design, Drafting and 3D Modeling acc. to ASME B31.3, ASME B31.4 using E3D, Autocad 3D Plant, Solidworks (Routing) Softwares. * Pressure Vessels Design (3 Phase Separators, Heater Treater, Scrubbers, and Gas Strippers) acc. to ASME VIII div.1, using PV Elite, Solidworks Softwares. *Tanks Design (Vertical and Horizontal) acc. to API 650 & BS 2594 using AMETANK Software. *Offshore Containers, Lifting Frame and Skid Mounted Packages acc. to DNV 2.7-1 , DNV 2.7-3 using Staad Pro, and Tekla Softewares. Prepare:- 1/ 3D Model. 2/ Shop & Fabrication Drawings. 3/ Isometrics Drawings, As-Built Drawings. 4/ Piping General Arrangement (GAs). 5/ Mechanical Calculations Notes. 6/ Bill of Materials. (BOM) 7/ Equipment & Line Lists. Activities:- 1/ Doing Field survey. 2/ Reviewing Technical Bid Requirements, specifications and documents of different disciplines. 3/ Making Technical Bids Evaluation. 4/ Attending 3D Model Review Sessions (30%, 60%, 90%) 5/ Attending HAZOP, HAZID, SIL Sessions. 5/ Meetings with the Customer. 6/ Client Counseling in English and Arabic Languages. I have proficiency in Softwares such as E3D, AutoCad 3D Plant, AutoCad 2D, Solidworks, PV Elite, AME Tank, Staad Pro, Tekla Structure hereinafter, Portfolio, it's pleasure to have a look on it.

An astute Professional with 15+ experience in Designing, Planning and Execution of Pipeline based projects and manufacturing of Lubrication systems (Oil and Grease) for Steel Rolling Plants, Cement &... Read more

An astute Professional with 15+ experience in Designing, Planning and Execution of Pipeline based projects and manufacturing of Lubrication systems (Oil and Grease) for Steel Rolling Plants, Cement & Fertilizers Plants, Pulp and Paper Plants, Thermal Power Plants, Hydro Electric Power, Coal Mining Projects and Industrial Plants. Complete knowledge of P & IDs, General Arrangement Drawing, isometric, views, plans and layout. Nozzle Orientation for horizontal and vertical vessels in SP3D. Equipment layouts, detailing and orientation in SP3D. Routing of piping as per the system requirement with the help of P&ID and Equipment layout. Acquainted with International Code and Standards like ASME, API, ASTM etc. Knowledge of Pumps, Filtration units, Heat Exchangers, Valves and Instrumentation. Layouts in Autocad. Conversion from PDF Format to DWG Format

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanica... Read more

Amr has 10 years of experience in Design career reflecting pioneering experience and career progression through working in different multinational firms and industries; Oil & Gas and Electro-Mechanical. My current specialty involves piping engineering (Stress analysis), Code Calculations; and well acquainted with Pipeline Calculations (Hydraulic analysis, Surge Analysis, Pipe Wall thicknesses for internal and external pressure; and branch Connection) as per Referenced ASME Standards. I have a wide exposure to different multinational engineering firm’s environments and standards through participation in part time and full time contracts projects. Core Competencies • Well acquainted with ASME Codes (B31.1, B31.3, B31.4, B31.8, SEC. VIII DIV. 1) Calculations • Preparation of technical specifications and design calculations • Preparing Critical Line Lists • Static and dynamic stress analysis of piping systems (Sustained loads, Expansion loads &Occasional load) Using CAESAR II • Specializing in pipe stress analysis and advising design team on arrangement and support requirement to work within code stress requirements • Pipe support hardware selection & details drawings. • Nozzle flexibility Check • Equipment Nozzles Calculation as per (NEMA SM23, API 610, API 617, API 661 and API 650) • Flanges(Raised & Flat Face, Reversed, Clamped hub) calculations • Isometric Stress Sketches and Civil info Sheets • Proper design of firefighting pipes supports and bracing as per NFPA 2010 chapter 9. • Buried Piping (ASCE, ALLA, PENG, AWWA, NEN 3650). Highlights ASME (B31.1, B31.3, B31.4, B31.8, Sec. Viii Div1); Autocad Plant 3D; AFT Fathom Impulse; Autopipe; Bentley Hammer; Bentley Water Gems; Caesar II; CADWORX; Fluid Networks Computation; Hangers And Springs Selection; Navis Work; Pipe Flo; Pipe Supporting; PRG 2011 (Nozzle Pro, Fe-Pipe, Fe-Bend, Fe-Sif); Revit Mep; Smart Plant 3D; Static & Dynamic Stress Analysis; Surge Analysis; Wall Thickness Calculations; PDMS