Hire the best freelance road & drainage project expert designers for your company

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling,... Read more

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling, storm water management planning, water supply systems and modeling, non-revenue water reduction strategies, subsurface utility engineering, municipal engineering, urban planning, transportation and project management. He has been involved as Civil Engineering Lead and Utility Design Lead on a number of projects, having extensive project cycle experience, from front-end studies to full EPCM / EPC mandates as well as P3 Design Build Projects, including planning, design, construction, and installation phases in complex, time-sensitive environments.

I am an associate engineer having +5 Years experience in Design Engineering, Detail Drawings, Civil Engineering, Project Management, New Product Development, Value Engineering, Reverse Engineering,... Read more

I am an associate engineer having +5 Years experience in Design Engineering, Detail Drawings, Civil Engineering, Project Management, New Product Development, Value Engineering, Reverse Engineering, AutoCAD, Civil 3D, MicroStation V8.

Hi There, I'm a bachelor's Civil Engineer with more than five years of experience in the building and road sector. I'm an expert in Autodesk AutoCAD, REVIT, and SAP2000, Sketchup, and Lumion software... Read more

Hi There, I'm a bachelor's Civil Engineer with more than five years of experience in the building and road sector. I'm an expert in Autodesk AutoCAD, REVIT, and SAP2000, Sketchup, and Lumion software. Also, I'm an expert building designer using Eurocodes, IRC 2021 (International Residence Code - 2021), State residential codes, and Zoning code. I am willing to work with you to give a professional service with 100% satisfaction using my knowledge and experience. Thank you for visiting my profile, and I hope to hear from you soon..!

i'm Quantity Surveyor and Autocad Draftsman with 7 years Experiance with of Roads,buildings, Infrastrucure works , Parks and Hosticulture Works Read more

i'm Quantity Surveyor and Autocad Draftsman with 7 years Experiance with of Roads,buildings, Infrastrucure works , Parks and Hosticulture Works

I am a professional Engineer, Consultant with 40 years of experience worked with top ranked engineering consultants on various mega projects within Pakistan and internationally and designed drawings d... Read more

I am a professional Engineer, Consultant with 40 years of experience worked with top ranked engineering consultants on various mega projects within Pakistan and internationally and designed drawings drafting is a massive part of my life by using AutoCAD, and other civil engineering related software like Autocad for 2D Designs Drawings Draftings, AutoCAD Civil3D, Excel for Quantities estimation and Bill of Quantities etc. Here is a quick overview of the services I provide to my clients: ➥ My Services: ✔ Preparing design and drafting drawings on Autocad 2D Design Drawings Drafting, Autocad Civil 3D ✔ Plumbing, HVAC, Electrical , Firefighting, MEP Design, infrastructure wet utilities network designs for water supply, sewerage, storm water drainage, fire fighting, sprinkler system make Calculations, and prepare Drawings plans and miscellaneous details like pump rooms, retention tanks, septic tanks, underground water reservoirs, soakage pits etc. ✔ Traffic analysis, Technical Content Report Writing ✔ Provide Consultation for Solutions to various problems in structures, architecture, modifications ✔ Develop architectural concept plans, detailed drawings, MEP design and drawings, Topographic Survey Data import in cad file and enhancement, Parking lot designs, Landscape design, Town Master Planning Design, ✔ Modifications in design drawings Autocad software ✔ Draw PDF drawings into Autocad on scale ✔ Hydrology calculations and design drain channels, storm water design ✔ Water supply network and Sewerage Pipe Networks, manholes, Storm water drainage systems networks, Firefighting Networks ✔ Following each client’s defined techniques and procedures for their preparing design and drawings ✔ Learning any custom or proprietary processes to help meet your specific, unique needs ✔ Easily understand and hands on various design and planning codes of international authorities, municipals, including USA codes (AASHTO, ACI, MUTCD, HCM, FGI, IBC, ICC, ADA standards, NFPA, SUDS, UDC, ASTM, NEPIS) ✔ Prepare Cost estimates and Bill of Quantities with Breakup of Takeoff Materials and Rate analysis in Excel Sheets ✔Sprinkler & Hydrant Systems, Fire Alarm Plan ✔ Electrical Diagrams / SLD (Single Line Drawing) ✔Prepare Brochures for Companies and Individuals ✔ Site Grading Software Skills: ✔ AutoCad 2D and 3D ✔ AutoCad CIVIL 3D ✔Vehicle Simulation Software ✔Pipe Network in Autocad Civil3D ✔Sketchup ✔Revit ✔ Plan swift ✔ MS Excel, MS Word, MS PowerPoint ➥ Why choose me? ✔Experienced ✔Quick response ✔Meeting Deadlines ✔Attention to Details ✔Accuracy is my biggest virtue and for this reason, I have been commended on the quality of my work in previous companies. ✔Transparency and ease of work Contact to get the quote about your project and get your project on the way to success. ✔ I take complete responsibility for what I do. ✔ Quality Work & Fast Response Time ✔ Reliability (You can trust me with anything) ✔24/7 availability (I have a great team) ✔ Excellent written and verbal English skills My main goal is to bring the best work for my respectable client. Looking forward to working with you soon

Hi Guys, This is Sudipta Sekh, I have a total of 16 years 6 months of working experience in (gulf & India) in the field of Road & Bridge project, oil & gas, civil, Mechanical, structural, MEP & pipin... Read more

Hi Guys, This is Sudipta Sekh, I have a total of 16 years 6 months of working experience in (gulf & India) in the field of Road & Bridge project, oil & gas, civil, Mechanical, structural, MEP & piping. COMPUTER PROFICIENCY AutoCAD- latest version Autocad Civil 3D Autodesk Revit 3D Studio Max STAAD Pro. V8i Adobe PhotoShop Adobe Illustrator CC 2015 Google Sketch-up Pro MS-Office

I am an experienced civil engineer in contracting with mega size companies in the gulf region. I am experienced in project management and able to do contracting works from A to Z in structural, fit-ou... Read more

I am an experienced civil engineer in contracting with mega size companies in the gulf region. I am experienced in project management and able to do contracting works from A to Z in structural, fit-out and infra works. On the other hand, i am also a researcher and have deep knowledge in hydro modeling. Services i can provide: -Drainage, grading and site planning -Google earth engine -Civil 3d - Hydrology and hydraulics calculations -GIS & hydro modeling (HEC-RAS, HEC-HMS, Flood routing) - Erosion control plans - Earthwork quantity calculations -Road design - Quantity takeoff - Project time scheduling - Qualitative research - Revit modeling - 3d visualization - research writing -Stormwater, sewer, and water management plan -Commercial/Residential lot subdivision -Flood modeling -LIDAR Data classifications

I am a Civil Engineer specializing in Land development and survey projects with+15 years of experience. I can work closely with your design and drafting needs as well in providing much needed and on-g... Read more

I am a Civil Engineer specializing in Land development and survey projects with+15 years of experience. I can work closely with your design and drafting needs as well in providing much needed and on-going design and drafting specifically in the areas of • AutoCAD, Land Development Desktop, Civil 3D • Site planning, Mass grading, sewer design and utilities • Grading, Demolition and construction plans • Sewerage & drainage plans/ CAD drawings • Road cross-section & Piping plans/ CAD drawings • Digitizing images (map contours and landscape) Survey Drafting • Structural CAD drawings • Structural detailing • Timber Design • Architectural layout & landscaping CAD drawings • Architectural floor plan CAD drawings • Space plan CAD drawings • Revit Modeling • Rendering in 3DS Max and SketchUp • Interior designing & planning / CAD drawings • Quantity takeoffs • Land development & Survey Projects My expertise is: - Water, sanitary sewer, and storm drainage projects for residential, commercial, and industrial areas and Land development and survey project experience. Based on my +15 years experience, I am capable of participating in different types of civil projects such as: road & drainage designs, subdivision projects, treatment plants projects, plumbing designs No matter how big a project is, I can assist independently with minimal instruction and supervision from your side. Thanks to the time difference, your project can be done while you asleep, Reasons to hire me: - - Quality and timely service - I am a very responsible professional and never disappear in the half-done job. - I am very fast, I can finish the 2 days job in few hours. - I am assuring you quality work as I worked on many international projects. - Good work with commitment and professionalism. - 100 % satisfaction guaranteed - Continued support after the delivery of final product -Refund money if you are not satisfied with work.

Seasoned Project Manager and Coordinator with 20+ Years of Experience Expertise: - Project coordination and management - Rebar detailing and drafting - Industrial structures, factories, substations,... Read more

Seasoned Project Manager and Coordinator with 20+ Years of Experience Expertise: - Project coordination and management - Rebar detailing and drafting - Industrial structures, factories, substations, and building projects - Familiarity with relevant standards, codes, and standard drawings Key Responsibilities: - Site planning: site grading, fencing, gates, road layouts, and details - Drainage and topography: layout and details - Architectural drawings: steel and RC structures - General arrangement and fabrication drawings - Reinforcement drawings: buildings - Pipe rack structures and equipment foundations - Interdisciplinary design coordination - Rebar drawing checking and quality control - Workload planning and organization - BOQ and BBS preparation - Site visits and reporting to management

I am a highly skilled Civil Engineer with over 4 years of professional experience. I specialize in using AutoCAD and Civil 3D, Global Mapper, & many other skills to deliver precise and efficient desig... Read more

I am a highly skilled Civil Engineer with over 4 years of professional experience. I specialize in using AutoCAD and Civil 3D, Global Mapper, & many other skills to deliver precise and efficient designs for a variety of civil engineering projects. My expertise includes site layout design, grading plans, and drainage design. I am committed to providing top-notch services and innovative solutions to meet the unique needs of each client. Whether working on small-scale projects or large infrastructure developments, I bring a high level of dedication and technical proficiency to every task.

 Sr. Auto Cad Draftsman EDUCATIONAL BACKGROUND  HSC. (Intermediate) (Board of Intermediate & Secondary Education, West Bengal, India.) TECHNICAL EDUCATION  Diploma in CIVIL AUTOCAD for 1 year (... Read more

 Sr. Auto Cad Draftsman EDUCATIONAL BACKGROUND  HSC. (Intermediate) (Board of Intermediate & Secondary Education, West Bengal, India.) TECHNICAL EDUCATION  Diploma in CIVIL AUTOCAD for 1 year (20 Mar 2000 to 19 March 2001) COMPUTER PROFICIENCY  AutoCAD- latest version  3D Studio Max  Adobe Photo Shop  Adobe Illustrator CC 2015  Adobe premiere pro CC 2015  Adobe After effect CC 2015  Most 2D - Nesting Software (cutting plans for CNC gas, plasma, laser Cutting machines)  Google Sketch up Pro  MS-Office Career Objective:  To secure a challenging position where I can effectively contribute my skills as Draftsman, possessing competent technical skills. Personal Skills:  Good creative and designing skill, communication skill, ability to work in stress, willingness to learn new things. KEY PROFESSIONAL EXPERIENCE  I have Total 14 years 9 month of working experience in (gulf & India) in the field of Road & Bridge project, oil & gas, civil, Mechanical, structural, MEP & piping. WORKING EXPERIENCE 1. COMPANY - JSP PROJECT PVT. LTD. (NCR – GHAZIABAD) Position: AutoCAD Officer (Draughtsman) From- 13th August 2018 to till date Project-1 rehabilitation and up-gradation to 2 Lane / 2 Lane with Paved Shoulder configuration & strengthening of National Highway no. 94 from km 144.00(Dharasu) to Km 220.00(Yamunotri) In the State of Uttarakhand. PKG-5 (EPC) Client- Government of India Ministry of road transport & highways Designer - MC Consulting Engineers Pvt. Ltd. Project- 2 Rehabilitation and up-gradation of Pilibhit-Puranpur Section from Km.0.000 to Km. 38.000(Excluding tiger reserve area from km. 20.200 to Km. 23.400) of NH-730 to two Lanes with paved shoulder Under EPC mode in the State of Uttar Pradesh. Client- Ministry of road transport & highway Designer - BS consultancy Services Project- 3 Tow lane with paved solder of Allahabad - Tikri Section Of NH-76E from Km 400+878 to Km 450+000 in the State Of Uttar Pradesh On EPC Mode.Client- Ministry of road transport & highway uppwd (nhcd) nh730-up-mnb-32+254-1x50 -001 (r0) Bareilly. Client- Ministry of road transport & highway Designer - CVS Consultant Project- 4 Rehabilitation and up-gradation of Indo/Nepal border to Varanasi Section of NH-233 in the State of Uttar Pradesh under NHDP IV-B (Package-IA) Client- National Highway Authority of India (NHAI) Designer - - Responsibilities  Preparation of road layout plan & topographic layout base on survey coordinate and change data sheet  Preparation of Detail Shop Drawing and Section Plan for Such As Culverts minor bridges, major bridges, steel girder bridges & ROB  Preparation of Detailed shuttering arrangement & Fabrication Drawing For easy of work.  Preparation of BOQ and Material Sheet of material perches for procurement department.  Preparation of Detailed RFD sketches for any changes in the material specification or design changes.  Preparation of shop fabrication & erection scheme drawing for fabrication, execution & erection.  Preparation and Issuance of Enabling Works Drawings and co-ordination with site for detail of structure and Drawings Issuance to Site. Preparation of sequence/methodology for Safe Operation of Cranes, Barges etc.  Preparation of Shop Drawings for Civil Works incl. Pedestal Concreting, Main Truss Deck Slab Reinforcement BBS, Mastic bituminous asphalt over the road decking.  Providing Control Coordinates to Survey Dep’t. For ensuring works as per true coordinates.  Preparation of true scale 3D view of structures for understanding of structures and its representation to Engineers.  Prepare As Built Drawings for Civil, Structural  Preparation of detail Drawing and BBS for civil Structure like Pire, Pier Cap Pile well, pile cap, column & deck Slab. 2. COMPANY - HINDUSTAN CONSTRUCTION COMPANY LTD. Project- Bogibeel Rail-cum-Road Bridge Project (Dibrugarh Distric/ Assam / INDIA) Client- North East Frontier Railway Designer - Ramboll – Denmark Position: AutoCAD DAFTSMAN From- 24th February 2014 to 12th August 2018 Responsibilities  Preparation of shop/fabrication drawings for fabrication of steel works / Component based from approved GFC (good For Construction) drawings and co-ordination with Clint NFR (North frontier railway) for Approval of the Drawings  Preparation of Nesting drawing for cutting process , Scrap / wastage reductions timely optimization within allowable limit at 15%  Preparation and Issuance of Enabling Works Drawings and co-ordination with HO-Design for Approval of the Drawings and Issuance to Site. Preparation of Drawings and sequence/methodology for Safe Operation of Cranes, Barges etc.  Preparation of Shop Drawings for Civil Works incl. Pedestal Concreting, Main Truss Deck Slab Reinforcement BBS, Mastic bituminous asphalt over the road decking.  Providing Control Coordinates to Survey Dep’t. For ensuring works as per true coordinates.  Preparation of true to scale 3-D view of structures for understanding of structures and its representation to Engineers.  Prepare As Built Drawings for Civil, Structural 3. COMPANY - S.R. Chaudhuri And Associates (Kolkata / West Bengal / INDIA) Project- 1 East West Metro KOLKATA Clint- Kolkata Metro Rail Corporation Limited Contactor- CCCL (CONSOLIDATED, CONSTRUCTION, CONSORTIUM LTD.) Position: Snr. MEP Draftsman From- 1st may 2013 to 20th February 2014 Responsibilities  Prepare Electrical & Plumbing Drawing for ADMINISTRATIVE BUILDING, ETU BUILDING, CENTRAL PARK DEPOT - STABLING YARD, DCO STORE.  Prepare Civil Structural Shop Drawing for TQ (Technical Quarries) , BBS & Site Sketches for Civil Structural & Piping Works  Prepare Section Detail and Layout Drawing For Civil Structural 4. COMPANY - AL JABER ENERGY SERVICES LLC (UAE – United Arab Emirates) Project- 1 (RSHT-2) Ruwais Sulphur Handling Terminal - 2 (Ruwais / Abu Dhabi / UAE) Clint- GASCO Contactor- Al Jaber Energy Services LLC. / TECHINT Engineering & Construction Position: Draftsman From- 25 November 2012 to 31 March 2013 Responsibilities  Prepare shop drawing for material ordering like angle frame, I Beams, rebar arrangement for EP, IP, Manhole, Sump pit & concrete trench.  Prepare Civil Structural Shop Drawing for TQ (Technical Quarries) , BBS & Site Sketches for Civil Structural & Piping Works  Prepare Section Detail and Layout Drawing For Civil Structural & Piping Works, Foundation, Pedestal, AOC Manhole. Electrical pit, Instrument pit, electrical & Instrument duct bank Shop Drawings  Preparation of Isometric drawings for underground services like AOC, OD, CD, WW, DW GRE Pipeline  Preparation of Tope Graphic survey layouts & As-Built Drawings. Project- 2 ASAB FFD – Asab Full Field Development Project. (Asab / Abu Dhabi / UAE) Client- ADCO Contractor – Petrofac international LTD. Position: Draftsman From- 06 April 2010 to 24 November 2012 Responsibilities  Prepare Civil Structural Shop Drawing for TQ, BBS & Site Sketches for Civil Structural & Piping Works  Prepare Section Detail and Layout Drawing For Civil Structural & Piping Works.  Prepare Piping Layout & Isometric drawings for GRE underground services like AOC, OD (Oily Drain), CD (Closed drain), WW (Wash Water), and DW (Drainage Water) line.  Prepare As Built Drawings for Civil, Structural & Piping Works. Project- 3 Masdar head Quarter (Masdar green city Abu Dhabi future energy company) (Abu Dhabi/UAE) Client- Masdar Position: Structural, MEP & Civil Draftsman From- 01 November 2008 to 05 April 2010 Responsibilities  Preparation of Civil and Structural Shop Drawing Section, Reinforcement Arrangement & Bar markings.  Topographic layouts for Plumbing & geothermal pipe line.  Section Details for Civil Grade Slab & MEP Section Shop Drawing.  Preparation of As Built drawing for Plumbing & geothermal pipe line as per surveyor information. Project- 4 Onshore gas Development Phase III Habshan (OGD III) (Habshan / Abu Dhabi / UAE) Client- Gasco Contractor- Eastern Bechtel Company Limited. Sub Contract- Al Jaber Energy Services LLC. Position- Civil Draftsman From- 18 September 2005 to 29 October 2008. Responsibilities  Preparation of Civil and Structural Shop Drawing for Civil Foundation, Pedestal and AOC Manhole.  Piping Layout for GRE underground services like AOC, OD (Oily Drain), CD (Closed drain), WW (Wash Water), DW (Drainage Water) line  Preparation of Isometric drawings for underground services like AOC, OD, CD, WW, DW GRE Pipeline.  Preparation of As Built drawing as per surveyor information. Project- 5 ULG.LSGO Plant EPC Oil and Gas Project. (ULG / LSGO) (Ruwais / Abu Dhabi / UAE) Client – Takreer Contractor - Technip Italy s.p.a. Sub Contract- Al Jaber Energy Services LLC. Position- Civil Draftsman From- 11/12/2003 to 17/09/2005. Responsibilities  Preparation of Civil Structural Shop Drawing Civil Foundation, Pedestal, AOC Manhole.  Preparation of As Built drawing as per surveyor information.  Preparation of Topographic Layout as per surveyor information. PROFESSIONAL STRENGHT  Excellent communication and interpersonal skills.  Ability to take the initiative in learning about new technologies and adding new value to organization.  Efficiency and Effective team player.  Maintain positive attitude in under pressure of work assignment given.  Team developing and coordination.

I am a Licensed Civil/Structural Engineer with professional experience, with a team of architects and engineers. We work in Architectural Plans, Landscape Plans, Civil Engineering, Structural Engineer... Read more

I am a Licensed Civil/Structural Engineer with professional experience, with a team of architects and engineers. We work in Architectural Plans, Landscape Plans, Civil Engineering, Structural Engineering, MEP/HVAC Plan and 3D renderings in various engineering projects. Senior partner to Architects and Engineers licensed in multiple states. AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IL, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY. Code Knowledge: - IBC 2018 (International Building Code) - AISC 360-10 (American Institute of Steel Construction Code) - ACI 318-14 (American of Concrete Institute Code) - NDS 2018 (National Design Specification for Wood Construction) - ASCE 7-16 (Minimum Design Loads and Associated Criteria for Buildings and Other Structures) - AASHTO (Road and Bridge Design Criteria) - NEC, NESC, NEPA 70E, IEEE, ANSI and NEMA Experience in architectural and engineering projects for: * Site Plan * Grading, Drainage, and Stormwater Design Hydrologic and Hydraulic Engineering * Structural Plan for Residential and Commercial Buildings * Wooden, Aluminum, Steel, RC, LGS * Road Design (Alignment, Profile, Cross Section) * Retaining Wall * Architectural(Floor Plan, Elevation) and Landscape Plan(Irrigation Plan, Planting plan) * MEP/HVAC Plan * Title24 * Reviewing and Sealing Plans, PE Letter * Contract Documents Working with a strong team, I complete multiphase projects, from plan development to construction oversight including costs, schedules, quality control, client information, team management and contracts. I would take great pride in helping you achieve your project goals! Feel free to send a connection invite or direct message to discuss your project needs, and I would be happy to help!

I am a certified structural engineer and an architectural designer. I had the opportunity to learn and practice for 15 years in different fields of structural and architectural design. I worked with r... Read more

I am a certified structural engineer and an architectural designer. I had the opportunity to learn and practice for 15 years in different fields of structural and architectural design. I worked with reinforced concrete, steel, and cold-formed steel, timber, masonry, ICF. I am proficient in stress and stability calculations, structural optimization. Knowledge of FEA techniques using a variety of software. Knowledge of the US and Canada Building codes. Residential houses, hotels, commercial buildings, industrial plants, warehouses, etc.. Can provide FL, NY, NJ, PA, WY, TX, AZ, WA, AL, AR, CA, CO, CT, DE, DC, GA, HI, ID, IL, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, MY, NV, NM, NC, OH, OG, RI, SC, TN, UT, VT, VA, WV, WI PE license Thanks *********************************************************************** I am a Licensed Civil/Structural Engineer with professional experience, with a team of architects and engineers. We work in Architectural Plans, Landscape Plans, Civil Engineering, Structural Engineering, MEP/HVAC Plan and 3D renderings in various engineering projects. Senior partner to Architects and Engineers licensed in multiple states. AL, AZ, AR, CA, CO, CT, DE, DC, FL, GA, HI, ID, IL, IN, IA, KS, KY, LA, ME, MD, MA, MI, MN, MS, MO, NE, NV, NM, NJ, NY, NC, ND, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VT, VA, WA, WV, WI and WY. Code Knowledge: -IBC 2021 (International Building Code) -AISC 360-22 (American Institute of Steel Construction Code) -ACI 318-19 (American of Concrete Institute Code) -NDS 2024 (National Design Specification for Wood Construction) -ASCE 7-22 (Minimum Design Loads and Associated Criteria for Buildings and Other Structures) -AASHTO (Road and Bridge Design Criteria) Experience in architectural and engineering projects for: * Architectural and Landscape Plan * Site Plan * Grading, Drainage, and Stormwater Design Hydrologic and Hydraulic Engineering * Structural Plan for Residential and Commercial Buildings * Wooden, Aluminum, Steel, RC Structure * Road Design (Alignment, Profile, Cross Section) * Retaining Wall * MEP/HVAC Plan * Reviewing and Sealing Plans, PE Letter * Contract Documents Strong knowledge of building codes across multiple states . Good experience with building permit applications and offering tailored guidance to clients facing difficulties getting permits for their building projects. I would take great pride in helping you achieve your project goals! Feel free to send a connection invite or direct message to discuss your project needs, and I would be happy to help!

With a dynamic career as a Civil Engineer and Drafter spanning over six years, I bring to the table a wealth of experience, a strong commitment to precision, and a passion for exceeding expectations.... Read more

With a dynamic career as a Civil Engineer and Drafter spanning over six years, I bring to the table a wealth of experience, a strong commitment to precision, and a passion for exceeding expectations. My journey started in 2016, and since then, I've worn multiple hats, from inspection and testing roles to drafting and designing for complex projects. My current role as a Project Engineer involves overseeing a team of design engineers on large-scale industrial site development projects. This diverse experience has shaped me into a versatile professional who is comfortable navigating the many facets of civil engineering. In terms of technical skills, my proficiency with AutoCAD and Civil 3D sets me apart. This mastery was honed through my time as a drafting professor, a role in which I developed a comprehensive curriculum and wrote over 800 pages of material. This experience not only deepened my own knowledge but also equipped me with the skills to communicate complex concepts effectively. Among my notable projects are Amazon distribution centers, Domino's stores, and public water and sewer mains spread across Oregon, Western Washington, and as far as Tennessee. Each project has sharpened my ability to conduct detailed stormwater and wastewater management solutions, site grading, road design, sewer lift stations, and many other tasks, all of which are completed with rigorous attention to detail and a commitment to delivering results on time and within budget. Educationally, I hold a bachelor's degree in civil engineering with a minor in applied physics from an ABET accredited institution. Graduating summa cum laude, I proved my dedication to my field and my commitment to achieving high standards. My strengths lie not only in my technical abilities but also in my strategic approach to project management and my meticulous attention to detail. I kick off projects with a comprehensive schedule, identify critical paths and target dates, maintain consistent communication with clients, and ensure all discussions are documented for future reference. I am proud to be a licensed Professional Engineer (PE) in Washington, and I am ready to secure licensure in other states according to the project's needs. My approach to work is characterized by a commitment to transforming clients' visions into reality, delivering aesthetic and sustainable designs within the agreed timeframe and budget. In my free time, I nurture my love for learning, dabbling in coding, indulging in my passion for physics and science, playing chess, and enjoying tennis. These interests add a unique dimension to my professional skillset, as I continually seek to learn, grow, and bring fresh perspectives to my work. In every project I undertake, I strive to embody the principles of excellence, integrity, and sustainable practices. Your vision is my mission, and I look forward to crafting engineering solutions that exceed your expectations.

I am a Civil Engineer, working in the construction and mechanical industry since 1998. I have worked on different projects and companies, from Residential and commercial building to complex infrastruc... Read more

I am a Civil Engineer, working in the construction and mechanical industry since 1998. I have worked on different projects and companies, from Residential and commercial building to complex infrastructure projects. In Pakistan I have worked mostly on residential building and villas, when Pakistan’s first Motorway project was launched I became a part of pioneering team. I worked there on M2 Lahore to Islamabad motorway project and was in-charge of Culverts and small underpasses which ran under the motorway to facilitate the locals, villagers and animals of the area to cross under the road. In 2007 I moved to United Arab Emirates, here I mostly worked on infrastructure projects based in Dubai and Abu Dhabi. My focus was utilities, like potable water, sewerage and sanitary water, storm water drainage and irrigation most of the time. But I also worked on electrical networks and fiber optic cables for telecoms and traffic. With the experience spanning more than 2 decades I have decided to now shift my attention to freelancing world. As the world is changing repeatedly so is the way to work. Freelancing is the most comfortable way to express my abilities and find new technologies and meet new people which I truly enjoy. I can work on Civil and Mechanical projects, detailed drawings for Tools and Assemblies, Floor plans, Front elevations, Architectural details and sections for buildings as well as Layouts, profiles and sketches for infrastructure work you name it. Elementary survey (on ground and trial trenches) details or complex works of layout and profiling an area for any utility or structure I am your expert to do it all. I like to take up challenges, freelancing will present my skills to the whole world. I also have good communication skills as I had worked with many multinational companies, consultants and clients with nationalities in Pakistan and abroad, from all around the world. Meeting dead lines, finishing work with accuracy and professionalism is my trademark. For comfort and peace of mind to my client I keep direct and constant connection, till the work ends.

My name is Faheem hussain and I am graduated interior designer from Step Institute of Art and Design with a bachelor's degree in Interior Design. I am working as a freelance interior designer in Local... Read more

My name is Faheem hussain and I am graduated interior designer from Step Institute of Art and Design with a bachelor's degree in Interior Design. I am working as a freelance interior designer in Local and international markets Since last 8 years.I believe in a collaborative approach and work closely with my clients to understand their practical needs, mixing this with décor styles and ideas they love to create a real ‘wow’ factor within any given space – from one room to an entire house. Being a interior designer, My objective is to contribute to the company’s success by producing the most accurate and feasible illustrations for the projects assigned to me. I am eager to learn and further my proficiencies by constantly improving my work and accepting all kinds of assignments handed out to me. With this said, I am confident that I can measure up to the expectations of my clients.

 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fan... Read more

 2011– 2016: CAD/CAM Team Leader at HESEM Ltd.Co • 3D modeling from 2D drawing, sketch, picture, old model • Fixture design, tooling, tool list • CNC programming for 3, 4, 5 axis. - Control: Fanuc, Siemmen, Heidenhain... - Machine: Hass, Fidia, Makino, Matsuura... - Material: Aluminium, titanium, plastic... • 2D drafting • Shop document • Verify program • Fist article sheet • Maintenance old program, optimize for production  2009– 2011: CAD/CAM/CNC staff at International Corporation Trung Dung • 3D modeling from 2D drawing, sketch, picture, old model • CNC programming • Set up and operate • Inspection part

BS Mechanical Engineering. Certified SolidWorks Associate. Designed hundreds of plastic parts. Organized & created thousands of technical documents. Read more

BS Mechanical Engineering. Certified SolidWorks Associate. Designed hundreds of plastic parts. Organized & created thousands of technical documents.

Experienced Mechanical Design Engineer with a demonstrated history of working in the water treatment equipment manufacturing and machining industry. Skilled in AutoCAD Mechanical, AutoCAD, Microsoft... Read more

Experienced Mechanical Design Engineer with a demonstrated history of working in the water treatment equipment manufacturing and machining industry. Skilled in AutoCAD Mechanical, AutoCAD, Microsoft Word, SolidWorks, and Technical Writing. Strong program and project management professional with an Ontario College Diploma focused on Mechanical Engineering (Design & Drafting) Program from Sheridan College.

Given the chance I will work hard to attain on the job skills .I am very good in keeping time and deadlines. I am also good at organizing my time and always ensure that I accomplish my duties at the s... Read more

Given the chance I will work hard to attain on the job skills .I am very good in keeping time and deadlines. I am also good at organizing my time and always ensure that I accomplish my duties at the stipulated time. I interact well with people.

Dynamic, energetic and forward-thinking individual dedicated to design and strategy as driving force behind sustainable projects. Extensive experience in the design of private yachts, ROPAX ferries,... Read more

Dynamic, energetic and forward-thinking individual dedicated to design and strategy as driving force behind sustainable projects. Extensive experience in the design of private yachts, ROPAX ferries, work boats and government ships in Europe and the Americas since 1989. Human, creative, hands-on experience on building international coalitions in the marine and yachting industries. Practical, detail-oriented, attentive to numbers, data and results, quality and schedule, ensuring control over budget and target. To build strategic partnerships, expand and strengthen missions, align internal with external communications. To bring resources from senior contacts of a robust network of industry experts, builders, government agencies, corporations and academia. Services include complete design packages for private and commercial designs vessels: yachts, passenger ships and special projects. Business support to foreign individuals and companies working on the following domains: marine, land, air, solar, electricity, wind, hydrogen and ammonia applications.

Architect | Interior Design, Elevation Design, Landscape Design & Architectural Planning I specialize in creating stunning interiors, innovative elevations, beautiful landscapes, and comprehensive ar... Read more

Architect | Interior Design, Elevation Design, Landscape Design & Architectural Planning I specialize in creating stunning interiors, innovative elevations, beautiful landscapes, and comprehensive architectural plans. My goal is to bring your vision to life with functional, aesthetically pleasing designs tailored to your needs. Services: Interior Design: Stylish, comfortable, and practical spaces. Elevation Designs: Modern exteriors with enhanced curb appeal. Landscape Design: Sustainable and beautiful outdoor spaces. Architectural Planning: Detailed plans for residential and commercial projects. Why Choose Me? Creative Solutions: Tailored designs for every project. Attention to Detail: Meticulous planning and execution. Client-Centric: Clear communication and prioritizing your preferences. Timely Delivery: High-quality work delivered on schedule.

I’m an Engineering CAD Technician living in Southern California. I Design and create visual content. While working as a consultant for the Los Angeles Department of Water and Power, I specialized i... Read more

I’m an Engineering CAD Technician living in Southern California. I Design and create visual content. While working as a consultant for the Los Angeles Department of Water and Power, I specialized in electrical drawings for various projects in the Los Angeles and surrounding areas. I have also had the opportunity to work for Southern California Edison where I focused mainly on CAD/GIS projects. At Parsons Corporations I was able to work in Civil Design. My career has afforded me the opportunity to work in both the private and public sectors and has given me a vast knowledge in all areas of Engineering and CADD/GIS. Currently I work for Metropolitan Water District of Southern California as a Sr. Designer. There, I provide drafting/design support to major projects by creating and updating various MicroStation CAD drawings/3D models.

I graduated from the Architecture Engineering Study Program in 1999. And I also have experience in several engineering consulting offices. Besides that I also have work experience in the banking secto... Read more

I graduated from the Architecture Engineering Study Program in 1999. And I also have experience in several engineering consulting offices. Besides that I also have work experience in the banking sector.